mirror of
https://github.com/torvalds/linux.git
synced 2026-05-26 16:12:59 +02:00
ASoC: codec: wcd93xx: Convert to GPIO descriptors
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>: of_gpio.h is deprecated, so update driver to use gpiod API. The current driver use value 0 to assert reset and 1 to deassert reset. The DTSes in tree that use the codec are using GPIO_ACTIVE_LOW. So it is safe to use devm_gpiod_get to get GPIO descriptors and use gpiod_set_value to configure output with value 1 means raw value 0, value 0 means raw value 1. Note: I not have devices to test, just my best pratice to do the convertion.
This commit is contained in:
commit
94112d3d94
|
|
@ -17,7 +17,7 @@
|
|||
#include <sound/soc.h>
|
||||
#include <sound/pcm_params.h>
|
||||
#include <sound/soc-dapm.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <sound/tlv.h>
|
||||
|
|
@ -331,7 +331,7 @@ struct wcd9335_codec {
|
|||
int comp_enabled[COMPANDER_MAX];
|
||||
|
||||
int intr1;
|
||||
int reset_gpio;
|
||||
struct gpio_desc *reset_gpio;
|
||||
struct regulator_bulk_data supplies[WCD9335_MAX_SUPPLY];
|
||||
|
||||
unsigned int rx_port_value[WCD9335_RX_MAX];
|
||||
|
|
@ -4975,12 +4975,11 @@ static const struct regmap_irq_chip wcd9335_regmap_irq1_chip = {
|
|||
static int wcd9335_parse_dt(struct wcd9335_codec *wcd)
|
||||
{
|
||||
struct device *dev = wcd->dev;
|
||||
struct device_node *np = dev->of_node;
|
||||
int ret;
|
||||
|
||||
wcd->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
|
||||
if (wcd->reset_gpio < 0)
|
||||
return dev_err_probe(dev, wcd->reset_gpio, "Reset GPIO missing from DT\n");
|
||||
wcd->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(wcd->reset_gpio))
|
||||
return dev_err_probe(dev, PTR_ERR(wcd->reset_gpio), "Reset GPIO missing from DT\n");
|
||||
|
||||
wcd->mclk = devm_clk_get(dev, "mclk");
|
||||
if (IS_ERR(wcd->mclk))
|
||||
|
|
@ -5023,9 +5022,9 @@ static int wcd9335_power_on_reset(struct wcd9335_codec *wcd)
|
|||
*/
|
||||
usleep_range(600, 650);
|
||||
|
||||
gpio_direction_output(wcd->reset_gpio, 0);
|
||||
gpiod_set_value(wcd->reset_gpio, 1);
|
||||
msleep(20);
|
||||
gpio_set_value(wcd->reset_gpio, 1);
|
||||
gpiod_set_value(wcd->reset_gpio, 0);
|
||||
msleep(20);
|
||||
|
||||
return 0;
|
||||
|
|
|
|||
|
|
@ -11,7 +11,6 @@
|
|||
#include <linux/pm_runtime.h>
|
||||
#include <linux/component.h>
|
||||
#include <sound/tlv.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/of.h>
|
||||
#include <sound/jack.h>
|
||||
#include <sound/pcm.h>
|
||||
|
|
@ -171,7 +170,7 @@ struct wcd938x_priv {
|
|||
int flyback_cur_det_disable;
|
||||
int ear_rx_path;
|
||||
int variant;
|
||||
int reset_gpio;
|
||||
struct gpio_desc *reset_gpio;
|
||||
struct gpio_desc *us_euro_gpio;
|
||||
u32 micb1_mv;
|
||||
u32 micb2_mv;
|
||||
|
|
@ -3251,9 +3250,9 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
|
|||
struct wcd_mbhc_config *cfg = &wcd938x->mbhc_cfg;
|
||||
int ret;
|
||||
|
||||
wcd938x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0);
|
||||
if (wcd938x->reset_gpio < 0)
|
||||
return dev_err_probe(dev, wcd938x->reset_gpio,
|
||||
wcd938x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(wcd938x->reset_gpio))
|
||||
return dev_err_probe(dev, PTR_ERR(wcd938x->reset_gpio),
|
||||
"Failed to get reset gpio\n");
|
||||
|
||||
wcd938x->us_euro_gpio = devm_gpiod_get_optional(dev, "us-euro",
|
||||
|
|
@ -3297,10 +3296,10 @@ static int wcd938x_populate_dt_data(struct wcd938x_priv *wcd938x, struct device
|
|||
|
||||
static int wcd938x_reset(struct wcd938x_priv *wcd938x)
|
||||
{
|
||||
gpio_direction_output(wcd938x->reset_gpio, 0);
|
||||
gpiod_set_value(wcd938x->reset_gpio, 1);
|
||||
/* 20us sleep required after pulling the reset gpio to LOW */
|
||||
usleep_range(20, 30);
|
||||
gpio_set_value(wcd938x->reset_gpio, 1);
|
||||
gpiod_set_value(wcd938x->reset_gpio, 0);
|
||||
/* 20us sleep required after pulling the reset gpio to HIGH */
|
||||
usleep_range(20, 30);
|
||||
|
||||
|
|
|
|||
|
|
@ -15,7 +15,6 @@
|
|||
#include <linux/pm_runtime.h>
|
||||
#include <linux/component.h>
|
||||
#include <sound/tlv.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/of_graph.h>
|
||||
#include <linux/of.h>
|
||||
#include <sound/jack.h>
|
||||
|
|
@ -201,7 +200,7 @@ struct wcd939x_priv {
|
|||
u32 hph_mode;
|
||||
u32 tx_mode[TX_ADC_MAX];
|
||||
int variant;
|
||||
int reset_gpio;
|
||||
struct gpio_desc *reset_gpio;
|
||||
u32 micb1_mv;
|
||||
u32 micb2_mv;
|
||||
u32 micb3_mv;
|
||||
|
|
@ -3239,10 +3238,11 @@ static int wcd939x_populate_dt_data(struct wcd939x_priv *wcd939x, struct device
|
|||
#endif /* CONFIG_TYPEC */
|
||||
int ret;
|
||||
|
||||
wcd939x->reset_gpio = of_get_named_gpio(dev->of_node, "reset-gpios", 0);
|
||||
if (wcd939x->reset_gpio < 0)
|
||||
return dev_err_probe(dev, wcd939x->reset_gpio,
|
||||
"Failed to get reset gpio\n");
|
||||
wcd939x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(wcd939x->reset_gpio)) {
|
||||
ret = PTR_ERR(wcd939x->reset_gpio);
|
||||
return dev_err_probe(dev, ret, "Failed to get reset gpio\n");
|
||||
}
|
||||
|
||||
wcd939x->supplies[0].supply = "vdd-rxtx";
|
||||
wcd939x->supplies[1].supply = "vdd-io";
|
||||
|
|
@ -3290,10 +3290,10 @@ static int wcd939x_populate_dt_data(struct wcd939x_priv *wcd939x, struct device
|
|||
|
||||
static int wcd939x_reset(struct wcd939x_priv *wcd939x)
|
||||
{
|
||||
gpio_direction_output(wcd939x->reset_gpio, 0);
|
||||
gpiod_set_value(wcd939x->reset_gpio, 1);
|
||||
/* 20us sleep required after pulling the reset gpio to LOW */
|
||||
usleep_range(20, 30);
|
||||
gpio_set_value(wcd939x->reset_gpio, 1);
|
||||
gpiod_set_value(wcd939x->reset_gpio, 0);
|
||||
/* 20us sleep required after pulling the reset gpio to HIGH */
|
||||
usleep_range(20, 30);
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user