From f44a75e27d5eb4b1788f59c2bc185baaaf732f75 Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Tue, 14 Apr 2015 17:09:14 -0700 Subject: [PATCH 01/16] i40e: Implement ndo_features_check() i40e supports UDP tunnel headers up to 80 bytes in length, so this adds a check to ensure that it doesn't try to offload packets that exceed that. Signed-off-by: Joe Stringer Signed-off-by: Jesse Gross Acked-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 48a52b35b614..b44eb357cff7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -8099,6 +8099,25 @@ static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, } #endif /* HAVE_BRIDGE_ATTRIBS */ +#define I40E_MAX_TUNNEL_HDR_LEN 80 +/** + * i40e_features_check - Validate encapsulated packet conforms to limits + * @skb: skb buff + * @netdev: This physical port's netdev + * @features: Offload features that the stack believes apply + **/ +static netdev_features_t i40e_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) +{ + if (skb->encapsulation && + (skb_inner_mac_header(skb) - skb_transport_header(skb) > + I40E_MAX_TUNNEL_HDR_LEN)) + return features & ~(NETIF_F_ALL_CSUM | NETIF_F_GSO_MASK); + + return features; +} + static const struct net_device_ops i40e_netdev_ops = { .ndo_open = i40e_open, .ndo_stop = i40e_close, @@ -8133,6 +8152,7 @@ static const struct net_device_ops i40e_netdev_ops = { #endif .ndo_get_phys_port_id = i40e_get_phys_port_id, .ndo_fdb_add = i40e_ndo_fdb_add, + .ndo_features_check = i40e_features_check, #ifdef HAVE_BRIDGE_ATTRIBS .ndo_bridge_getlink = i40e_ndo_bridge_getlink, .ndo_bridge_setlink = i40e_ndo_bridge_setlink, From d0389e51fc9b3c74e7935ded5d22eab4ea004589 Mon Sep 17 00:00:00 2001 From: Anjali Singhai Jain Date: Wed, 22 Apr 2015 19:34:05 -0400 Subject: [PATCH 02/16] i40e/i40evf: Add stats to track FD ATR and SB dynamic enable state Since the driver can dynamically enable/disable FD ATR and SB features, these stats help keep track of the current state and along with fd_flush count provide a means to debug what could be going on with the flow director filters. This will take away the need for being verbose in our debug logs with respect to FD. Change-ID: I29224f750fe6602391043655d18996570720377d Signed-off-by: Anjali Singhai Jain Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 2 ++ drivers/net/ethernet/intel/i40e/i40e_main.c | 12 ++++++++++++ drivers/net/ethernet/intel/i40e/i40e_type.h | 2 ++ drivers/net/ethernet/intel/i40evf/i40e_type.h | 2 ++ 4 files changed, 18 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 9a68c65b17ea..0b68f61eeb0c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -148,7 +148,9 @@ static struct i40e_stats i40e_gstrings_stats[] = { I40E_PF_STAT("fdir_flush_cnt", fd_flush_cnt), I40E_PF_STAT("fdir_atr_match", stats.fd_atr_match), I40E_PF_STAT("fdir_atr_tunnel_match", stats.fd_atr_tunnel_match), + I40E_PF_STAT("fdir_atr_status", stats.fd_atr_status), I40E_PF_STAT("fdir_sb_match", stats.fd_sb_match), + I40E_PF_STAT("fdir_sb_status", stats.fd_sb_status), /* LPI stats */ I40E_PF_STAT("tx_lpi_status", stats.tx_lpi_status), diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index b44eb357cff7..b5fc6544fb69 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -1123,6 +1123,18 @@ static void i40e_update_pf_stats(struct i40e_pf *pf) pf->stat_offsets_loaded, &osd->rx_lpi_count, &nsd->rx_lpi_count); + if (pf->flags & I40E_FLAG_FD_SB_ENABLED && + !(pf->auto_disable_flags & I40E_FLAG_FD_SB_ENABLED)) + nsd->fd_sb_status = true; + else + nsd->fd_sb_status = false; + + if (pf->flags & I40E_FLAG_FD_ATR_ENABLED && + !(pf->auto_disable_flags & I40E_FLAG_FD_ATR_ENABLED)) + nsd->fd_atr_status = true; + else + nsd->fd_atr_status = false; + pf->stat_offsets_loaded = true; } diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h index 9a5a75b1e2bc..350c5ee85ec3 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_type.h +++ b/drivers/net/ethernet/intel/i40e/i40e_type.h @@ -1134,6 +1134,8 @@ struct i40e_hw_port_stats { u64 fd_atr_match; u64 fd_sb_match; u64 fd_atr_tunnel_match; + u32 fd_atr_status; + u32 fd_sb_status; /* EEE LPI */ u32 tx_lpi_status; u32 rx_lpi_status; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h index c463ec41579c..068813d3c7a3 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_type.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h @@ -1109,6 +1109,8 @@ struct i40e_hw_port_stats { u64 fd_atr_match; u64 fd_sb_match; u64 fd_atr_tunnel_match; + u32 fd_atr_status; + u32 fd_sb_status; /* EEE LPI */ u32 tx_lpi_status; u32 rx_lpi_status; From c78b953e0f189824f5eaa2d60123cfd12ea6db0d Mon Sep 17 00:00:00 2001 From: Pawel Orlowski Date: Wed, 22 Apr 2015 19:34:06 -0400 Subject: [PATCH 03/16] i40e/i40evf: Update Flex-10 related device/function capabilities The Flex10 device/function capability has been upgraded to include information needed to support Flex-10 configurations. This patch adds new fields to the i40e_hw_capabilities structure and updates i40e_parse_discover_capabilities functions to extract them from the AQ response. Naming convention has changed to use flex10 mode instead of existing mfp_mode_1. Change-ID: I305dd888866985a30293acb3fb14fa43ca6b79ea Signed-off-by: Pawel Orlowski Signed-off-by: Akeem G Abodunrin Signed-off-by: Shannon Nelson Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_common.c | 24 +++++++++++++++---- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_type.h | 12 +++++++++- drivers/net/ethernet/intel/i40evf/i40e_type.h | 12 +++++++++- 4 files changed, 42 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c index 0bae22da014d..07032229ee60 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_common.c +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c @@ -2391,7 +2391,7 @@ i40e_status i40e_aq_erase_nvm(struct i40e_hw *hw, u8 module_pointer, #define I40E_DEV_FUNC_CAP_MSIX_VF 0x44 #define I40E_DEV_FUNC_CAP_FLOW_DIRECTOR 0x45 #define I40E_DEV_FUNC_CAP_IEEE_1588 0x46 -#define I40E_DEV_FUNC_CAP_MFP_MODE_1 0xF1 +#define I40E_DEV_FUNC_CAP_FLEX10 0xF1 #define I40E_DEV_FUNC_CAP_CEM 0xF2 #define I40E_DEV_FUNC_CAP_IWARP 0x51 #define I40E_DEV_FUNC_CAP_LED 0x61 @@ -2416,6 +2416,7 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff, u32 valid_functions, num_functions; u32 number, logical_id, phys_id; struct i40e_hw_capabilities *p; + u8 major_rev; u32 i = 0; u16 id; @@ -2433,6 +2434,7 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff, number = le32_to_cpu(cap->number); logical_id = le32_to_cpu(cap->logical_id); phys_id = le32_to_cpu(cap->phys_id); + major_rev = cap->major_rev; switch (id) { case I40E_DEV_FUNC_CAP_SWITCH_MODE: @@ -2507,9 +2509,21 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff, case I40E_DEV_FUNC_CAP_MSIX_VF: p->num_msix_vectors_vf = number; break; - case I40E_DEV_FUNC_CAP_MFP_MODE_1: - if (number == 1) - p->mfp_mode_1 = true; + case I40E_DEV_FUNC_CAP_FLEX10: + if (major_rev == 1) { + if (number == 1) { + p->flex10_enable = true; + p->flex10_capable = true; + } + } else { + /* Capability revision >= 2 */ + if (number & 1) + p->flex10_enable = true; + if (number & 2) + p->flex10_capable = true; + } + p->flex10_mode = logical_id; + p->flex10_status = phys_id; break; case I40E_DEV_FUNC_CAP_CEM: if (number == 1) @@ -2557,7 +2571,7 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff, /* Software override ensuring FCoE is disabled if npar or mfp * mode because it is not supported in these modes. */ - if (p->npar_enable || p->mfp_mode_1) + if (p->npar_enable || p->flex10_enable) p->fcoe = false; /* count the enabled ports (aka the "not disabled" ports) */ diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index b5fc6544fb69..ed6fc52362af 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -7685,7 +7685,7 @@ static int i40e_sw_init(struct i40e_pf *pf) } /* MFP mode enabled */ - if (pf->hw.func_caps.npar_enable || pf->hw.func_caps.mfp_mode_1) { + if (pf->hw.func_caps.npar_enable || pf->hw.func_caps.flex10_enable) { pf->flags |= I40E_FLAG_MFP_ENABLED; dev_info(&pf->pdev->dev, "MFP mode Enabled\n"); if (i40e_get_npar_bw_setting(pf)) diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h index 350c5ee85ec3..220371ece7c4 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_type.h +++ b/drivers/net/ethernet/intel/i40e/i40e_type.h @@ -213,7 +213,17 @@ struct i40e_hw_capabilities { bool dcb; bool fcoe; bool iscsi; /* Indicates iSCSI enabled */ - bool mfp_mode_1; + bool flex10_enable; + bool flex10_capable; + u32 flex10_mode; +#define I40E_FLEX10_MODE_UNKNOWN 0x0 +#define I40E_FLEX10_MODE_DCC 0x1 +#define I40E_FLEX10_MODE_DCI 0x2 + + u32 flex10_status; +#define I40E_FLEX10_STATUS_DCC_ERROR 0x1 +#define I40E_FLEX10_STATUS_VC_MODE 0x2 + bool mgmt_cem; bool ieee_1588; bool iwarp; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h index 068813d3c7a3..3969c6548af0 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_type.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h @@ -213,7 +213,17 @@ struct i40e_hw_capabilities { bool dcb; bool fcoe; bool iscsi; /* Indicates iSCSI enabled */ - bool mfp_mode_1; + bool flex10_enable; + bool flex10_capable; + u32 flex10_mode; +#define I40E_FLEX10_MODE_UNKNOWN 0x0 +#define I40E_FLEX10_MODE_DCC 0x1 +#define I40E_FLEX10_MODE_DCI 0x2 + + u32 flex10_status; +#define I40E_FLEX10_STATUS_DCC_ERROR 0x1 +#define I40E_FLEX10_STATUS_VC_MODE 0x2 + bool mgmt_cem; bool ieee_1588; bool iwarp; From 489ce7a46306052ab4ef26c6305051c5f1b24bb4 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Mon, 27 Apr 2015 14:57:08 -0400 Subject: [PATCH 04/16] i40e/i40evf: improve Tx performance with a small tweak Add a prefetch for the next Tx descriptor to be used when we know there are more coming. Change-ID: Ibb9acab11d508eec2db7da795df74debc16eeacb Signed-off-by: Jesse Brandeburg Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 2 ++ drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 9a4f2bc70cd2..1fe230d2be5d 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2616,6 +2616,8 @@ static inline void i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb, netif_xmit_stopped(netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index))) writel(i, tx_ring->tail); + else + prefetchw(tx_desc + 1); return; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 395f32f226c0..0f0e185b5c66 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -1841,6 +1841,8 @@ static inline void i40evf_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb, netif_xmit_stopped(netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index))) writel(i, tx_ring->tail); + else + prefetchw(tx_desc + 1); return; From 973371da4d66b96736143bd3f2b2ff2331faae8f Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Mon, 27 Apr 2015 14:57:09 -0400 Subject: [PATCH 05/16] i40evf: Allow for an abundance of vectors The driver currently only maps TX and RX queues to a single MSI-X vector per queue pair if there are exactly enough vectors for this. Unfortunately, if we have too many vectors it will fail and allocate queues to vectors in a suboptimal manner. Change the condition check to allow for excess vectors. In this case, the extras just won't be used. Change-ID: I23e1e2955c64739c86612db88a25583e6a7e0b17 Signed-off-by: Mitch Williams Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 4ab4ebba07a1..94eff4a269e6 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -406,7 +406,7 @@ static int i40evf_map_rings_to_vectors(struct i40evf_adapter *adapter) /* The ideal configuration... * We have enough vectors to map one per queue. */ - if (q_vectors == (rxr_remaining * 2)) { + if (q_vectors >= (rxr_remaining * 2)) { for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++) i40evf_map_vector_to_rxq(adapter, v_start, rxr_idx); From 85927ec1b369c880407aa82eba70d49c04c35062 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Mon, 27 Apr 2015 14:57:10 -0400 Subject: [PATCH 06/16] i40e: ignore duplicate port VLAN requests If user attempts to set a port VLAN on a VF that already has the same port VLAN configured, the driver will go through a completely unnecessary flurry of filter removals and filter adds. Just check for this condition and return success instead of doing a bunch of busywork. Change-ID: Ia1a9e83e6ed48b3f4658bc20dfc6af0cf525d54a Signed-off-by: Mitch Williams Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 23f95cdbdfcc..433e80320eea 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -2088,6 +2088,10 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, goto error_pvid; } + if (vsi->info.pvid == (vlan_id | (qos << I40E_VLAN_PRIORITY_SHIFT))) + /* duplicate request, so just return success */ + goto error_pvid; + if (vsi->info.pvid == 0 && i40e_is_vsi_in_vlan(vsi)) { dev_err(&pf->pdev->dev, "VF %d has already configured VLAN filters and the administrator is requesting a port VLAN override.\nPlease unload and reload the VF driver for this change to take effect.\n", From 9df70b66418e284dc1e7f272ac445c1d1e990b97 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Mon, 27 Apr 2015 14:57:11 -0400 Subject: [PATCH 07/16] i40e: Remove incorrect #ifdef's This patch removes some #ifdef's that should not be there. They were stopping code that is needed from being compiled in. With these #ifdef's removed, changes are needed in the driver to fix some compile errors: adding missing parameters to the definition of ndo_bridge_setlink and a ndo_dflt_brige_getlink call. Change-ID: I5516614e1bc50b6bca0647cef971bc96161ba2de Signed-off-by: Carolyn Wyborny Signed-off-by: Catherine Sullivan Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index ed6fc52362af..c7f2a0a74dcf 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -7993,7 +7993,6 @@ static int i40e_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], return err; } -#ifdef HAVE_BRIDGE_ATTRIBS /** * i40e_ndo_bridge_setlink - Set the hardware bridge mode * @dev: the netdev being configured @@ -8007,7 +8006,8 @@ static int i40e_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], * bridge mode enabled. **/ static int i40e_ndo_bridge_setlink(struct net_device *dev, - struct nlmsghdr *nlh) + struct nlmsghdr *nlh, + u16 flags) { struct i40e_netdev_priv *np = netdev_priv(dev); struct i40e_vsi *vsi = np->vsi; @@ -8078,14 +8078,9 @@ static int i40e_ndo_bridge_setlink(struct net_device *dev, * Return the mode in which the hardware bridge is operating in * i.e VEB or VEPA. **/ -#ifdef HAVE_BRIDGE_FILTER static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, struct net_device *dev, u32 filter_mask, int nlflags) -#else -static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev, int nlflags) -#endif /* HAVE_BRIDGE_FILTER */ { struct i40e_netdev_priv *np = netdev_priv(dev); struct i40e_vsi *vsi = np->vsi; @@ -8109,7 +8104,6 @@ static int i40e_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, return ndo_dflt_bridge_getlink(skb, pid, seq, dev, veb->bridge_mode, nlflags, 0, 0, filter_mask, NULL); } -#endif /* HAVE_BRIDGE_ATTRIBS */ #define I40E_MAX_TUNNEL_HDR_LEN 80 /** @@ -8165,10 +8159,8 @@ static const struct net_device_ops i40e_netdev_ops = { .ndo_get_phys_port_id = i40e_get_phys_port_id, .ndo_fdb_add = i40e_ndo_fdb_add, .ndo_features_check = i40e_features_check, -#ifdef HAVE_BRIDGE_ATTRIBS .ndo_bridge_getlink = i40e_ndo_bridge_getlink, .ndo_bridge_setlink = i40e_ndo_bridge_setlink, -#endif /* HAVE_BRIDGE_ATTRIBS */ }; /** From cb2f65bc0c64015e8fa45fe1065ad241bf31a994 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Mon, 27 Apr 2015 14:57:12 -0400 Subject: [PATCH 08/16] i40e/i40evf: Update the admin queue command header Make the necessary updates to i40e_adminq_cmd.h. Change-ID: Ib031c86cc6cab78e5aa44c64d8ce5474be8d7e42 Signed-off-by: Greg Rose Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/i40e/i40e_adminq_cmd.h | 24 ++++++++++--------- .../ethernet/intel/i40evf/i40e_adminq_cmd.h | 18 ++++++-------- 2 files changed, 20 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h index 929e3d72a01e..9101f5c00f37 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h @@ -34,7 +34,7 @@ */ #define I40E_FW_API_VERSION_MAJOR 0x0001 -#define I40E_FW_API_VERSION_MINOR 0x0002 +#define I40E_FW_API_VERSION_MINOR 0x0004 struct i40e_aq_desc { __le16 flags; @@ -132,12 +132,7 @@ enum i40e_admin_queue_opc { i40e_aqc_opc_list_func_capabilities = 0x000A, i40e_aqc_opc_list_dev_capabilities = 0x000B, - i40e_aqc_opc_set_cppm_configuration = 0x0103, - i40e_aqc_opc_set_arp_proxy_entry = 0x0104, - i40e_aqc_opc_set_ns_proxy_entry = 0x0105, - /* LAA */ - i40e_aqc_opc_mng_laa = 0x0106, /* AQ obsolete */ i40e_aqc_opc_mac_address_read = 0x0107, i40e_aqc_opc_mac_address_write = 0x0108, @@ -262,7 +257,6 @@ enum i40e_admin_queue_opc { /* Tunnel commands */ i40e_aqc_opc_add_udp_tunnel = 0x0B00, i40e_aqc_opc_del_udp_tunnel = 0x0B01, - i40e_aqc_opc_tunnel_key_structure = 0x0B10, /* Async Events */ i40e_aqc_opc_event_lan_overflow = 0x1001, @@ -274,8 +268,6 @@ enum i40e_admin_queue_opc { i40e_aqc_opc_oem_ocbb_initialize = 0xFE03, /* debug commands */ - i40e_aqc_opc_debug_get_deviceid = 0xFF00, - i40e_aqc_opc_debug_set_mode = 0xFF01, i40e_aqc_opc_debug_read_reg = 0xFF03, i40e_aqc_opc_debug_write_reg = 0xFF04, i40e_aqc_opc_debug_modify_reg = 0xFF07, @@ -509,7 +501,8 @@ struct i40e_aqc_mac_address_read { #define I40E_AQC_SAN_ADDR_VALID 0x20 #define I40E_AQC_PORT_ADDR_VALID 0x40 #define I40E_AQC_WOL_ADDR_VALID 0x80 -#define I40E_AQC_ADDR_VALID_MASK 0xf0 +#define I40E_AQC_MC_MAG_EN_VALID 0x100 +#define I40E_AQC_ADDR_VALID_MASK 0x1F0 u8 reserved[6]; __le32 addr_high; __le32 addr_low; @@ -532,7 +525,9 @@ struct i40e_aqc_mac_address_write { #define I40E_AQC_WRITE_TYPE_LAA_ONLY 0x0000 #define I40E_AQC_WRITE_TYPE_LAA_WOL 0x4000 #define I40E_AQC_WRITE_TYPE_PORT 0x8000 -#define I40E_AQC_WRITE_TYPE_MASK 0xc000 +#define I40E_AQC_WRITE_TYPE_UPDATE_MC_MAG 0xC000 +#define I40E_AQC_WRITE_TYPE_MASK 0xC000 + __le16 mac_sah; __le32 mac_sal; u8 reserved[8]; @@ -1068,6 +1063,7 @@ struct i40e_aqc_set_vsi_promiscuous_modes { __le16 seid; #define I40E_AQC_VSI_PROM_CMD_SEID_MASK 0x3FF __le16 vlan_tag; +#define I40E_AQC_SET_VSI_VLAN_MASK 0x0FFF #define I40E_AQC_SET_VSI_VLAN_VALID 0x8000 u8 reserved[8]; }; @@ -2064,6 +2060,12 @@ I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_start); #define I40E_AQC_CEE_PFC_STATUS_MASK (0x7 << I40E_AQC_CEE_PFC_STATUS_SHIFT) #define I40E_AQC_CEE_APP_STATUS_SHIFT 0x8 #define I40E_AQC_CEE_APP_STATUS_MASK (0x7 << I40E_AQC_CEE_APP_STATUS_SHIFT) +#define I40E_AQC_CEE_FCOE_STATUS_SHIFT 0x8 +#define I40E_AQC_CEE_FCOE_STATUS_MASK (0x7 << I40E_AQC_CEE_FCOE_STATUS_SHIFT) +#define I40E_AQC_CEE_ISCSI_STATUS_SHIFT 0xA +#define I40E_AQC_CEE_ISCSI_STATUS_MASK (0x7 << I40E_AQC_CEE_ISCSI_STATUS_SHIFT) +#define I40E_AQC_CEE_FIP_STATUS_SHIFT 0x10 +#define I40E_AQC_CEE_FIP_STATUS_MASK (0x7 << I40E_AQC_CEE_FIP_STATUS_SHIFT) struct i40e_aqc_get_cee_dcb_cfg_v1_resp { u8 reserved1; u8 oper_num_tc; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h index e715bccfb5d2..d5bd6f066921 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h @@ -34,7 +34,7 @@ */ #define I40E_FW_API_VERSION_MAJOR 0x0001 -#define I40E_FW_API_VERSION_MINOR 0x0002 +#define I40E_FW_API_VERSION_MINOR 0x0004 #define I40E_FW_API_VERSION_A0_MINOR 0x0000 struct i40e_aq_desc { @@ -133,12 +133,7 @@ enum i40e_admin_queue_opc { i40e_aqc_opc_list_func_capabilities = 0x000A, i40e_aqc_opc_list_dev_capabilities = 0x000B, - i40e_aqc_opc_set_cppm_configuration = 0x0103, - i40e_aqc_opc_set_arp_proxy_entry = 0x0104, - i40e_aqc_opc_set_ns_proxy_entry = 0x0105, - /* LAA */ - i40e_aqc_opc_mng_laa = 0x0106, /* AQ obsolete */ i40e_aqc_opc_mac_address_read = 0x0107, i40e_aqc_opc_mac_address_write = 0x0108, @@ -260,7 +255,6 @@ enum i40e_admin_queue_opc { /* Tunnel commands */ i40e_aqc_opc_add_udp_tunnel = 0x0B00, i40e_aqc_opc_del_udp_tunnel = 0x0B01, - i40e_aqc_opc_tunnel_key_structure = 0x0B10, /* Async Events */ i40e_aqc_opc_event_lan_overflow = 0x1001, @@ -272,8 +266,6 @@ enum i40e_admin_queue_opc { i40e_aqc_opc_oem_ocbb_initialize = 0xFE03, /* debug commands */ - i40e_aqc_opc_debug_get_deviceid = 0xFF00, - i40e_aqc_opc_debug_set_mode = 0xFF01, i40e_aqc_opc_debug_read_reg = 0xFF03, i40e_aqc_opc_debug_write_reg = 0xFF04, i40e_aqc_opc_debug_modify_reg = 0xFF07, @@ -507,7 +499,8 @@ struct i40e_aqc_mac_address_read { #define I40E_AQC_SAN_ADDR_VALID 0x20 #define I40E_AQC_PORT_ADDR_VALID 0x40 #define I40E_AQC_WOL_ADDR_VALID 0x80 -#define I40E_AQC_ADDR_VALID_MASK 0xf0 +#define I40E_AQC_MC_MAG_EN_VALID 0x100 +#define I40E_AQC_ADDR_VALID_MASK 0x1F0 u8 reserved[6]; __le32 addr_high; __le32 addr_low; @@ -530,7 +523,9 @@ struct i40e_aqc_mac_address_write { #define I40E_AQC_WRITE_TYPE_LAA_ONLY 0x0000 #define I40E_AQC_WRITE_TYPE_LAA_WOL 0x4000 #define I40E_AQC_WRITE_TYPE_PORT 0x8000 -#define I40E_AQC_WRITE_TYPE_MASK 0xc000 +#define I40E_AQC_WRITE_TYPE_UPDATE_MC_MAG 0xC000 +#define I40E_AQC_WRITE_TYPE_MASK 0xC000 + __le16 mac_sah; __le32 mac_sal; u8 reserved[8]; @@ -1066,6 +1061,7 @@ struct i40e_aqc_set_vsi_promiscuous_modes { __le16 seid; #define I40E_AQC_VSI_PROM_CMD_SEID_MASK 0x3FF __le16 vlan_tag; +#define I40E_AQC_SET_VSI_VLAN_MASK 0x0FFF #define I40E_AQC_SET_VSI_VLAN_VALID 0x8000 u8 reserved[8]; }; From e995163cdcf9b70c7840a8d6a7ea7c0ce81c761b Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Mon, 27 Apr 2015 14:57:13 -0400 Subject: [PATCH 09/16] i40e: correctly program filters for VFs MAC filters for VFs were being programmed with 0 for the VLAN value when there was no VLAN assigned. This is incorrect and actually assigns the VF to VLAN 0. Instead, we must use -1 to indicate that no VLAN is in use. This change programs the filters correctly and gets rid of a bogus error message when setting a port VLAN on an active VF. Change-ID: Ica9a9906d768405377ff3308e27f7d0b5b2ea96e Signed-off-by: Mitch Williams Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 433e80320eea..4070a22f16c8 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -542,11 +542,13 @@ static int i40e_alloc_vsi_res(struct i40e_vf *vf, enum i40e_vsi_type type) if (vf->port_vlan_id) i40e_vsi_add_pvid(vsi, vf->port_vlan_id); f = i40e_add_filter(vsi, vf->default_lan_addr.addr, - vf->port_vlan_id, true, false); + vf->port_vlan_id ? vf->port_vlan_id : -1, + true, false); if (!f) dev_info(&pf->pdev->dev, "Could not allocate VF MAC addr\n"); - f = i40e_add_filter(vsi, brdcast, vf->port_vlan_id, + f = i40e_add_filter(vsi, brdcast, + vf->port_vlan_id ? vf->port_vlan_id : -1, true, false); if (!f) dev_info(&pf->pdev->dev, @@ -2023,7 +2025,8 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac) } /* delete the temporary mac address */ - i40e_del_filter(vsi, vf->default_lan_addr.addr, vf->port_vlan_id, + i40e_del_filter(vsi, vf->default_lan_addr.addr, + vf->port_vlan_id ? vf->port_vlan_id : -1, true, false); /* Delete all the filters for this VSI - we're going to kill it From 54f455eeb56c0ab92db87bed6bd767d206d9e743 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Mon, 27 Apr 2015 14:57:14 -0400 Subject: [PATCH 10/16] i40e: do a proper reset when disabling a VF The VF disable code was just whanging on the reset bit without properly cleaning up the VF, which would leave the VF in an indeterminate state from which it could not recover. Fix this by notifying the VF and then by calling the normal VF reset routine. Change-ID: I862b9dfa919368773cbdc212b805b520db2f7430 Signed-off-by: Mitch Williams Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 4070a22f16c8..55b19f5e436a 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -160,13 +160,8 @@ void i40e_vc_notify_vf_reset(struct i40e_vf *vf) **/ static inline void i40e_vc_disable_vf(struct i40e_pf *pf, struct i40e_vf *vf) { - struct i40e_hw *hw = &pf->hw; - u32 reg; - - reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id)); - reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK; - wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg); - i40e_flush(hw); + i40e_vc_notify_vf_reset(vf); + i40e_reset_vf(vf, false); } /** From 5b8f8505d37c63d492391e5fafcd43332671b36b Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Mon, 27 Apr 2015 14:57:15 -0400 Subject: [PATCH 11/16] i40e: un-disable VF after reset When a VF is disabled, there is no way for it to recover until either the PF driver is reloaded or SR-IOV is disabled and enabled. To correct this, enable the VF after a successful reset. Change-ID: I9e0788476c4d53d5407961b503febdfff2b8a7c6 Signed-off-by: Mitch Williams Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 55b19f5e436a..fdd7f5e3a66b 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -832,6 +832,7 @@ void i40e_reset_vf(struct i40e_vf *vf, bool flr) i40e_alloc_vf_res(vf); i40e_enable_vf_mappings(vf); set_bit(I40E_VF_STAT_ACTIVE, &vf->vf_states); + clear_bit(I40E_VF_STAT_DISABLED, &vf->vf_states); /* tell the VF the reset is done */ wr32(hw, I40E_VFGEN_RSTAT1(vf->vf_id), I40E_VFR_VFACTIVE); From 68ef169204e3a88ea4823645038d5496f66200f6 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Mon, 27 Apr 2015 14:57:16 -0400 Subject: [PATCH 12/16] i40evf: don't delete all the filters Due to an inverted conditional, the driver was marking all of its MAC filters for deletion every time set_rx_mode was called. Depending upon the timing of the calls to set_rx_mode and the processing of the admin queue, the driver would (accidentally) end up with a varying number of functional filters. Correct this logic so that MAC filters are added and removed correctly. Add a check for the driver's "hardware" MAC address so that this filter doesn't get removed incorrectly. Change-ID: Ib3e7c4a5b53df6835f164fe44cb778cb71f8aff8 Signed-off-by: Mitch Williams Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 94eff4a269e6..1c2ee97d1844 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -892,8 +892,10 @@ static void i40evf_set_rx_mode(struct net_device *netdev) break; } } + if (ether_addr_equal(f->macaddr, adapter->hw.mac.addr)) + found = true; } - if (found) { + if (!found) { f->remove = true; adapter->aq_required |= I40EVF_FLAG_AQ_DEL_MAC_FILTER; } From 44151cd32deb1074530f3beba51d535fa0887d9a Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Mon, 27 Apr 2015 14:57:17 -0400 Subject: [PATCH 13/16] i40evf: add MAC address filter in open, not init During close, all of the MAC filters are cleared, so the driver would be unable to receive unicast packets after being closed and reopened. Add the adapter's "hardware" MAC address filter in open, not init. This ensures that the correct filter is present each time. Change-ID: I51a11e9c1200139dab6f66a5353bd38c7d26f875 Signed-off-by: Mitch Williams Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 1c2ee97d1844..802e158ea981 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -1858,6 +1858,7 @@ static int i40evf_open(struct net_device *netdev) if (err) goto err_req_irq; + i40evf_add_filter(adapter, adapter->hw.mac.addr); i40evf_configure(adapter); err = i40evf_up_complete(adapter); @@ -1998,7 +1999,6 @@ static void i40evf_init_task(struct work_struct *work) struct i40evf_adapter, init_task.work); struct net_device *netdev = adapter->netdev; - struct i40evf_mac_filter *f; struct i40e_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; int i, err, bufsz; @@ -2132,16 +2132,6 @@ static void i40evf_init_task(struct work_struct *work) ether_addr_copy(netdev->dev_addr, adapter->hw.mac.addr); ether_addr_copy(netdev->perm_addr, adapter->hw.mac.addr); - f = kzalloc(sizeof(*f), GFP_ATOMIC); - if (!f) - goto err_sw_init; - - ether_addr_copy(f->macaddr, adapter->hw.mac.addr); - f->add = true; - adapter->aq_required |= I40EVF_FLAG_AQ_ADD_MAC_FILTER; - - list_add(&f->list, &adapter->mac_filter_list); - init_timer(&adapter->watchdog_timer); adapter->watchdog_timer.function = &i40evf_watchdog_timer; adapter->watchdog_timer.data = (unsigned long)adapter; From 3bbf0faa90cb8d541d8b2ce01610dcec6828bd00 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Mon, 27 Apr 2015 14:57:19 -0400 Subject: [PATCH 14/16] i40e/i40evf: Add support for pre-allocated pages for PD The i40e_add_pd_table_entry() routine is being modified to handle both cases where a backing page is passed and where backing page is allocated in i40e_add_pd_table_entry(). For PBLE resource management, it is more efficient for it to manage its backing pages. For VF, PBLE backing page addresses will be send to PF driver for PBLE resource. The i40e_remove_pd_bp() is also modified to not free pre-allocated pages and free only ones which were allocated in i40e_add_pd_table_entry(). Change-ID: Ie673f0403f22979e9406f5a94048dceb91bcf9a8 Signed-off-by: Faisal Latif Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_hmc.c | 30 ++++++++++++------- drivers/net/ethernet/intel/i40e/i40e_hmc.h | 4 ++- .../net/ethernet/intel/i40e/i40e_lan_hmc.c | 2 +- drivers/net/ethernet/intel/i40evf/i40e_hmc.h | 4 ++- 4 files changed, 27 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_hmc.c b/drivers/net/ethernet/intel/i40e/i40e_hmc.c index 9b987ccc9e82..b89856a5e313 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_hmc.c +++ b/drivers/net/ethernet/intel/i40e/i40e_hmc.c @@ -116,6 +116,7 @@ i40e_status i40e_add_sd_table_entry(struct i40e_hw *hw, * @hw: pointer to our HW structure * @hmc_info: pointer to the HMC configuration information structure * @pd_index: which page descriptor index to manipulate + * @rsrc_pg: if not NULL, use preallocated page instead of allocating new one. * * This function: * 1. Initializes the pd entry @@ -129,12 +130,14 @@ i40e_status i40e_add_sd_table_entry(struct i40e_hw *hw, **/ i40e_status i40e_add_pd_table_entry(struct i40e_hw *hw, struct i40e_hmc_info *hmc_info, - u32 pd_index) + u32 pd_index, + struct i40e_dma_mem *rsrc_pg) { i40e_status ret_code = 0; struct i40e_hmc_pd_table *pd_table; struct i40e_hmc_pd_entry *pd_entry; struct i40e_dma_mem mem; + struct i40e_dma_mem *page = &mem; u32 sd_idx, rel_pd_idx; u64 *pd_addr; u64 page_desc; @@ -155,18 +158,24 @@ i40e_status i40e_add_pd_table_entry(struct i40e_hw *hw, pd_table = &hmc_info->sd_table.sd_entry[sd_idx].u.pd_table; pd_entry = &pd_table->pd_entry[rel_pd_idx]; if (!pd_entry->valid) { - /* allocate a 4K backing page */ - ret_code = i40e_allocate_dma_mem(hw, &mem, i40e_mem_bp, - I40E_HMC_PAGED_BP_SIZE, - I40E_HMC_PD_BP_BUF_ALIGNMENT); - if (ret_code) - goto exit; + if (rsrc_pg) { + pd_entry->rsrc_pg = true; + page = rsrc_pg; + } else { + /* allocate a 4K backing page */ + ret_code = i40e_allocate_dma_mem(hw, page, i40e_mem_bp, + I40E_HMC_PAGED_BP_SIZE, + I40E_HMC_PD_BP_BUF_ALIGNMENT); + if (ret_code) + goto exit; + pd_entry->rsrc_pg = false; + } - pd_entry->bp.addr = mem; + pd_entry->bp.addr = *page; pd_entry->bp.sd_pd_index = pd_index; pd_entry->bp.entry_type = I40E_SD_TYPE_PAGED; /* Set page address and valid bit */ - page_desc = mem.pa | 0x1; + page_desc = page->pa | 0x1; pd_addr = (u64 *)pd_table->pd_page_addr.va; pd_addr += rel_pd_idx; @@ -240,7 +249,8 @@ i40e_status i40e_remove_pd_bp(struct i40e_hw *hw, I40E_INVALIDATE_PF_HMC_PD(hw, sd_idx, idx); /* free memory here */ - ret_code = i40e_free_dma_mem(hw, &(pd_entry->bp.addr)); + if (!pd_entry->rsrc_pg) + ret_code = i40e_free_dma_mem(hw, &pd_entry->bp.addr); if (ret_code) goto exit; if (!pd_table->ref_cnt) diff --git a/drivers/net/ethernet/intel/i40e/i40e_hmc.h b/drivers/net/ethernet/intel/i40e/i40e_hmc.h index 732a02660330..386416bf7267 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_hmc.h +++ b/drivers/net/ethernet/intel/i40e/i40e_hmc.h @@ -62,6 +62,7 @@ struct i40e_hmc_bp { struct i40e_hmc_pd_entry { struct i40e_hmc_bp bp; u32 sd_index; + bool rsrc_pg; bool valid; }; @@ -218,7 +219,8 @@ i40e_status i40e_add_sd_table_entry(struct i40e_hw *hw, i40e_status i40e_add_pd_table_entry(struct i40e_hw *hw, struct i40e_hmc_info *hmc_info, - u32 pd_index); + u32 pd_index, + struct i40e_dma_mem *rsrc_pg); i40e_status i40e_remove_pd_bp(struct i40e_hw *hw, struct i40e_hmc_info *hmc_info, u32 idx); diff --git a/drivers/net/ethernet/intel/i40e/i40e_lan_hmc.c b/drivers/net/ethernet/intel/i40e/i40e_lan_hmc.c index 0079ad7bcd0e..d399eaf5aad5 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_lan_hmc.c +++ b/drivers/net/ethernet/intel/i40e/i40e_lan_hmc.c @@ -387,7 +387,7 @@ static i40e_status i40e_create_lan_hmc_object(struct i40e_hw *hw, /* update the pd table entry */ ret_code = i40e_add_pd_table_entry(hw, info->hmc_info, - i); + i, NULL); if (ret_code) { pd_error = true; break; diff --git a/drivers/net/ethernet/intel/i40evf/i40e_hmc.h b/drivers/net/ethernet/intel/i40evf/i40e_hmc.h index 931c88044300..adc6f71f40a8 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_hmc.h +++ b/drivers/net/ethernet/intel/i40evf/i40e_hmc.h @@ -62,6 +62,7 @@ struct i40e_hmc_bp { struct i40e_hmc_pd_entry { struct i40e_hmc_bp bp; u32 sd_index; + bool rsrc_pg; bool valid; }; @@ -218,7 +219,8 @@ i40e_status i40e_add_sd_table_entry(struct i40e_hw *hw, i40e_status i40e_add_pd_table_entry(struct i40e_hw *hw, struct i40e_hmc_info *hmc_info, - u32 pd_index); + u32 pd_index, + struct i40e_dma_mem *rsrc_pg); i40e_status i40e_remove_pd_bp(struct i40e_hw *hw, struct i40e_hmc_info *hmc_info, u32 idx); From b2a75c5819ec910f430a2ff12fec6cce202899a0 Mon Sep 17 00:00:00 2001 From: Anjali Singhai Jain Date: Mon, 27 Apr 2015 14:57:20 -0400 Subject: [PATCH 15/16] i40e: Refine an error message to avoid confusion Change a warning message to indicate what may have really happened when the init_shared_code call fails. Change-ID: I616ace40fed120d0dec86dfc91ab2d7cde466904 Signed-off-by: Anjali Singhai Jain Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index c7f2a0a74dcf..9ec6fa292b20 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -9767,7 +9767,8 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = i40e_init_shared_code(hw); if (err) { - dev_info(&pdev->dev, "init_shared_code failed: %d\n", err); + dev_warn(&pdev->dev, "unidentified MAC or BLANK NVM: %d\n", + err); goto err_pf_reset; } From 76945bf9ff8a2433f1efb777ec64475c1eec08ab Mon Sep 17 00:00:00 2001 From: Catherine Sullivan Date: Mon, 27 Apr 2015 14:57:22 -0400 Subject: [PATCH 16/16] i40e/i40evf: Bump version to 1.3.6 for i40e and 1.3.2 for i40evf Bump. Change-ID: I84573d9fa51effc5b29bf5b8c74e3cc8b2673f48 Signed-off-by: Catherine Sullivan Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 9ec6fa292b20..6ce9086e558a 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -39,7 +39,7 @@ static const char i40e_driver_string[] = #define DRV_VERSION_MAJOR 1 #define DRV_VERSION_MINOR 3 -#define DRV_VERSION_BUILD 4 +#define DRV_VERSION_BUILD 6 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \ __stringify(DRV_VERSION_MINOR) "." \ __stringify(DRV_VERSION_BUILD) DRV_KERN diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 802e158ea981..c698523923e4 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -34,7 +34,7 @@ char i40evf_driver_name[] = "i40evf"; static const char i40evf_driver_string[] = "Intel(R) XL710/X710 Virtual Function Network Driver"; -#define DRV_VERSION "1.2.25" +#define DRV_VERSION "1.3.2" const char i40evf_driver_version[] = DRV_VERSION; static const char i40evf_copyright[] = "Copyright (c) 2013 - 2014 Intel Corporation.";