github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-07-31 11:37:06 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

Merge "Merge keystone/android-mainline-keystone-qcom-release.5.18-rc5 (a425be2) into msm-pineapple"

Browse Source
This commit is contained in:
qctecmdr 2022-05-16 13:59:21 -07:00 committed by Gerrit - the friendly Code Review server
commit 920d0d69d4
730 changed files with 20373 additions and 17643 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

186
BUILD.bazel
View File

@ -17,6 +17,190 @@ package(
],
)
load("//build/kernel/kleaf:common_kernels.bzl", "define_common_kernels")
load("//build/kernel/kleaf:constants.bzl", "aarch64_gz_outs")
load("//build/kernel/kleaf:common_kernels.bzl", "define_common_kernels", "define_db845c")
define_common_kernels()
# Sync with build.config.db845c
define_db845c(
name = "db845c",
outs = aarch64_gz_outs + [
"arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb",
"arch/arm64/boot/dts/qcom/sdm845-db845c.dtb",
],
module_outs = [
# keep sorted
"crypto/michael_mic.ko",
"drivers/base/regmap/regmap-sdw.ko",
"drivers/base/regmap/regmap-slimbus.ko",
"drivers/base/regmap/regmap-spmi.ko",
"drivers/bus/mhi/host/mhi.ko",
"drivers/clk/qcom/clk-qcom.ko",
"drivers/clk/qcom/clk-rpmh.ko",
"drivers/clk/qcom/clk-spmi-pmic-div.ko",
"drivers/clk/qcom/dispcc-sdm845.ko",
"drivers/clk/qcom/dispcc-sm8250.ko",
"drivers/clk/qcom/gcc-sdm845.ko",
"drivers/clk/qcom/gcc-sm8250.ko",
"drivers/clk/qcom/gpucc-sdm845.ko",
"drivers/clk/qcom/gpucc-sm8250.ko",
"drivers/clk/qcom/lpass-gfm-sm8250.ko",
"drivers/clk/qcom/videocc-sdm845.ko",
"drivers/clk/qcom/videocc-sm8250.ko",
"drivers/cpufreq/qcom-cpufreq-hw.ko",
"drivers/dma-buf/heaps/system_heap.ko",
"drivers/dma/qcom/bam_dma.ko",
"drivers/extcon/extcon-usb-gpio.ko",
"drivers/firmware/qcom-scm.ko",
"drivers/gpio/gpio-wcd934x.ko",
"drivers/gpu/drm/bridge/display-connector.ko",
"drivers/gpu/drm/bridge/lontium-lt9611.ko",
"drivers/gpu/drm/bridge/lontium-lt9611uxc.ko",
"drivers/gpu/drm/dp/drm_dp_helper.ko",
"drivers/gpu/drm/msm/msm.ko",
"drivers/gpu/drm/scheduler/gpu-sched.ko",
"drivers/hwspinlock/qcom_hwspinlock.ko",
"drivers/i2c/busses/i2c-designware-core.ko",
"drivers/i2c/busses/i2c-designware-platform.ko",
"drivers/i2c/busses/i2c-qcom-geni.ko",
"drivers/i2c/busses/i2c-qup.ko",
"drivers/i2c/busses/i2c-rk3x.ko",
"drivers/i2c/i2c-dev.ko",
"drivers/i2c/i2c-mux.ko",
"drivers/i2c/muxes/i2c-mux-pca954x.ko",
"drivers/iio/adc/qcom-spmi-adc5.ko",
"drivers/iio/adc/qcom-vadc-common.ko",
"drivers/input/misc/pm8941-pwrkey.ko",
"drivers/interconnect/qcom/icc-bcm-voter.ko",
"drivers/interconnect/qcom/icc-osm-l3.ko",
"drivers/interconnect/qcom/icc-rpmh.ko",
"drivers/interconnect/qcom/qnoc-sdm845.ko",
"drivers/interconnect/qcom/qnoc-sm8250.ko",
"drivers/iommu/arm/arm-smmu/arm_smmu.ko",
"drivers/irqchip/qcom-pdc.ko",
"drivers/mailbox/qcom-apcs-ipc-mailbox.ko",
"drivers/mailbox/qcom-ipcc.ko",
"drivers/media/platform/qcom/venus/venus-core.ko",
"drivers/media/platform/qcom/venus/venus-dec.ko",
"drivers/media/platform/qcom/venus/venus-enc.ko",
"drivers/mfd/qcom-spmi-pmic.ko",
"drivers/mfd/wcd934x.ko",
"drivers/misc/fastrpc.ko",
"drivers/mmc/host/cqhci.ko",
"drivers/mmc/host/sdhci-msm.ko",
"drivers/net/can/spi/mcp251xfd/mcp251xfd.ko",
"drivers/net/wireless/ath/ath.ko",
"drivers/net/wireless/ath/ath10k/ath10k_core.ko",
"drivers/net/wireless/ath/ath10k/ath10k_pci.ko",
"drivers/net/wireless/ath/ath10k/ath10k_snoc.ko",
"drivers/net/wireless/ath/ath11k/ath11k.ko",
"drivers/net/wireless/ath/ath11k/ath11k_ahb.ko",
"drivers/net/wireless/ath/ath11k/ath11k_pci.ko",
"drivers/nvmem/nvmem_qfprom.ko",
"drivers/phy/qualcomm/phy-qcom-qmp.ko",
"drivers/phy/qualcomm/phy-qcom-qusb2.ko",
"drivers/phy/qualcomm/phy-qcom-snps-femto-v2.ko",
"drivers/phy/qualcomm/phy-qcom-usb-hs.ko",
"drivers/pinctrl/qcom/pinctrl-lpass-lpi.ko",
"drivers/pinctrl/qcom/pinctrl-msm.ko",
"drivers/pinctrl/qcom/pinctrl-sdm845.ko",
"drivers/pinctrl/qcom/pinctrl-sm8250.ko",
"drivers/pinctrl/qcom/pinctrl-spmi-gpio.ko",
"drivers/pinctrl/qcom/pinctrl-spmi-mpp.ko",
"drivers/power/reset/qcom-pon.ko",
"drivers/power/reset/reboot-mode.ko",
"drivers/power/reset/syscon-reboot-mode.ko",
"drivers/regulator/gpio-regulator.ko",
"drivers/regulator/qcom-rpmh-regulator.ko",
"drivers/regulator/qcom_spmi-regulator.ko",
"drivers/regulator/qcom_usb_vbus-regulator.ko",
"drivers/remoteproc/qcom_common.ko",
"drivers/remoteproc/qcom_pil_info.ko",
"drivers/remoteproc/qcom_q6v5.ko",
"drivers/remoteproc/qcom_q6v5_adsp.ko",
"drivers/remoteproc/qcom_q6v5_mss.ko",
"drivers/remoteproc/qcom_q6v5_pas.ko",
"drivers/remoteproc/qcom_q6v5_wcss.ko",
"drivers/remoteproc/qcom_sysmon.ko",
"drivers/reset/reset-qcom-aoss.ko",
"drivers/reset/reset-qcom-pdc.ko",
"drivers/rpmsg/qcom_glink.ko",
"drivers/rpmsg/qcom_glink_rpm.ko",
"drivers/rpmsg/qcom_glink_smem.ko",
"drivers/rpmsg/qcom_smd.ko",
"drivers/rpmsg/rpmsg_ns.ko",
"drivers/rtc/rtc-pm8xxx.ko",
"drivers/scsi/ufs/ufs_qcom.ko",
"drivers/slimbus/slim-qcom-ngd-ctrl.ko",
"drivers/slimbus/slimbus.ko",
"drivers/soc/qcom/apr.ko",
"drivers/soc/qcom/cmd-db.ko",
"drivers/soc/qcom/cpr.ko",
"drivers/soc/qcom/llcc-qcom.ko",
"drivers/soc/qcom/mdt_loader.ko",
"drivers/soc/qcom/pdr_interface.ko",
"drivers/soc/qcom/qcom_aoss.ko",
"drivers/soc/qcom/qcom_rpmh.ko",
"drivers/soc/qcom/qmi_helpers.ko",
"drivers/soc/qcom/rmtfs_mem.ko",
"drivers/soc/qcom/rpmhpd.ko",
"drivers/soc/qcom/smem.ko",
"drivers/soc/qcom/smp2p.ko",
"drivers/soc/qcom/smsm.ko",
"drivers/soc/qcom/socinfo.ko",
"drivers/soc/qcom/spm.ko",
"drivers/soundwire/soundwire-bus.ko",
"drivers/soundwire/soundwire-qcom.ko",
"drivers/spi/spi-geni-qcom.ko",
"drivers/spi/spi-pl022.ko",
"drivers/spi/spi-qcom-qspi.ko",
"drivers/spi/spi-qup.ko",
"drivers/spmi/spmi-pmic-arb.ko",
"drivers/thermal/qcom/lmh.ko",
"drivers/thermal/qcom/qcom-spmi-adc-tm5.ko",
"drivers/thermal/qcom/qcom-spmi-temp-alarm.ko",
"drivers/thermal/qcom/qcom_tsens.ko",
"drivers/tty/serial/msm_serial.ko",
"drivers/usb/common/ulpi.ko",
"drivers/usb/host/ohci-hcd.ko",
"drivers/usb/host/ohci-pci.ko",
"drivers/usb/host/ohci-platform.ko",
"drivers/usb/typec/qcom-pmic-typec.ko",
"drivers/watchdog/pm8916_wdt.ko",
"drivers/watchdog/qcom-wdt.ko",
"net/qrtr/qrtr.ko",
"net/qrtr/qrtr-mhi.ko",
"net/qrtr/qrtr-smd.ko",
"net/qrtr/qrtr-tun.ko",
"sound/soc/codecs/snd-soc-dmic.ko",
"sound/soc/codecs/snd-soc-hdmi-codec.ko",
"sound/soc/codecs/snd-soc-lpass-macro-common.ko",
"sound/soc/codecs/snd-soc-lpass-va-macro.ko",
"sound/soc/codecs/snd-soc-lpass-wsa-macro.ko",
"sound/soc/codecs/snd-soc-max98927.ko",
"sound/soc/codecs/snd-soc-rl6231.ko",
"sound/soc/codecs/snd-soc-rt5663.ko",
"sound/soc/codecs/snd-soc-wcd-mbhc.ko",
"sound/soc/codecs/snd-soc-wcd9335.ko",
"sound/soc/codecs/snd-soc-wcd934x.ko",
"sound/soc/codecs/snd-soc-wsa881x.ko",
"sound/soc/qcom/qdsp6/q6adm.ko",
"sound/soc/qcom/qdsp6/q6afe.ko",
"sound/soc/qcom/qdsp6/q6afe-clocks.ko",
"sound/soc/qcom/qdsp6/q6afe-dai.ko",
"sound/soc/qcom/qdsp6/q6apm-dai.ko",
"sound/soc/qcom/qdsp6/q6apm-lpass-dais.ko",
"sound/soc/qcom/qdsp6/q6asm.ko",
"sound/soc/qcom/qdsp6/q6asm-dai.ko",
"sound/soc/qcom/qdsp6/q6core.ko",
"sound/soc/qcom/qdsp6/q6prm.ko",
"sound/soc/qcom/qdsp6/q6prm-clocks.ko",
"sound/soc/qcom/qdsp6/q6routing.ko",
"sound/soc/qcom/qdsp6/snd-q6apm.ko",
"sound/soc/qcom/qdsp6/snd-q6dsp-common.ko",
"sound/soc/qcom/snd-soc-qcom-common.ko",
"sound/soc/qcom/snd-soc-sdm845.ko",
"sound/soc/qcom/snd-soc-sm8250.ko",
],
)

5
Documentation/ABI/testing/sysfs-fs-erofs
View File

@ -9,8 +9,9 @@ Description: Shows all enabled kernel features.
What: /sys/fs/erofs/<disk>/sync_decompress
Date: November 2021
Contact: "Huang Jianan" <huangjianan@oppo.com>
Description: Control strategy of sync decompression
Description: Control strategy of sync decompression:
- 0 (default, auto): enable for readpage, and enable for
readahead on atomic contexts only,
readahead on atomic contexts only.
- 1 (force on): enable for readpage and readahead.
- 2 (force off): disable for all situations.

4
Documentation/arm64/memory-tagging-extension.rst
View File

@ -228,10 +228,10 @@ Core dump support
-----------------
The allocation tags for user memory mapped with ``PROT_MTE`` are dumped
in the core file as additional ``PT_ARM_MEMTAG_MTE`` segments. The
in the core file as additional ``PT_AARCH64_MEMTAG_MTE`` segments. The
program header for such segment is defined as:
:``p_type``: ``PT_ARM_MEMTAG_MTE``
:``p_type``: ``PT_AARCH64_MEMTAG_MTE``
:``p_flags``: 0
:``p_offset``: segment file offset
:``p_vaddr``: segment virtual address, same as the corresponding

2
Documentation/filesystems/ext4/attributes.rst
View File

@ -76,7 +76,7 @@ The beginning of an extended attribute block is in
- Checksum of the extended attribute block.
* - 0x14
- \_\_u32
- h\_reserved[2]
- h\_reserved[3]
- Zero.
The checksum is calculated against the FS UUID, the 64-bit block number

70
Documentation/filesystems/f2fs.rst
View File

@ -235,12 +235,6 @@ offgrpjquota Turn off group journalled quota.
offprjjquota Turn off project journalled quota.
quota Enable plain user disk quota accounting.
noquota Disable all plain disk quota option.
whint_mode=%s Control which write hints are passed down to block
layer. This supports "off", "user-based", and
"fs-based". In "off" mode (default), f2fs does not pass
down hints. In "user-based" mode, f2fs tries to pass
down hints given by users. And in "fs-based" mode, f2fs
passes down hints with its policy.
alloc_mode=%s Adjust block allocation policy, which supports "reuse"
and "default".
fsync_mode=%s Control the policy of fsync. Currently supports "posix",
@ -751,70 +745,6 @@ In order to identify whether the data in the victim segment are valid or not,
F2FS manages a bitmap. Each bit represents the validity of a block, and the
bitmap is composed of a bit stream covering whole blocks in main area.
Write-hint Policy
-----------------
1) whint_mode=off. F2FS only passes down WRITE_LIFE_NOT_SET.
2) whint_mode=user-based. F2FS tries to pass down hints given by
users.
===================== ======================== ===================
User F2FS Block
===================== ======================== ===================
N/A META WRITE_LIFE_NOT_SET
N/A HOT_NODE "
N/A WARM_NODE "
N/A COLD_NODE "
ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME
extension list " "
-- buffered io
WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT
WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE " "
WRITE_LIFE_MEDIUM " "
WRITE_LIFE_LONG " "
-- direct io
WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT
WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE " WRITE_LIFE_NONE
WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM
WRITE_LIFE_LONG " WRITE_LIFE_LONG
===================== ======================== ===================
3) whint_mode=fs-based. F2FS passes down hints with its policy.
===================== ======================== ===================
User F2FS Block
===================== ======================== ===================
N/A META WRITE_LIFE_MEDIUM;
N/A HOT_NODE WRITE_LIFE_NOT_SET
N/A WARM_NODE "
N/A COLD_NODE WRITE_LIFE_NONE
ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME
extension list " "
-- buffered io
WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT
WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_LONG
WRITE_LIFE_NONE " "
WRITE_LIFE_MEDIUM " "
WRITE_LIFE_LONG " "
-- direct io
WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME
WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT
WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE " WRITE_LIFE_NONE
WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM
WRITE_LIFE_LONG " WRITE_LIFE_LONG
===================== ======================== ===================
Fallocate(2) Policy
-------------------

7
Documentation/networking/ip-sysctl.rst
View File

@ -267,6 +267,13 @@ ipfrag_max_dist - INTEGER
from different IP datagrams, which could result in data corruption.
Default: 64
bc_forwarding - INTEGER
bc_forwarding enables the feature described in rfc1812#section-5.3.5.2
and rfc2644. It allows the router to forward directed broadcast.
To enable this feature, the 'all' entry and the input interface entry
should be set to 1.
Default: 0
INET peer storage
=================

42
Documentation/security/siphash.rst
View File

@ -121,26 +121,36 @@ even scarier, uses an easily brute-forcable 64-bit key (with a 32-bit output)
instead of SipHash's 128-bit key. However, this may appeal to some
high-performance `jhash` users.
Danger!
HalfSipHash support is provided through the "hsiphash" family of functions.
Do not ever use HalfSipHash except for as a hashtable key function, and only
then when you can be absolutely certain that the outputs will never be
transmitted out of the kernel. This is only remotely useful over `jhash` as a
means of mitigating hashtable flooding denial of service attacks.
.. warning::
Do not ever use the hsiphash functions except for as a hashtable key
function, and only then when you can be absolutely certain that the outputs
will never be transmitted out of the kernel. This is only remotely useful
over `jhash` as a means of mitigating hashtable flooding denial of service
attacks.
Generating a HalfSipHash key
============================
On 64-bit kernels, the hsiphash functions actually implement SipHash-1-3, a
reduced-round variant of SipHash, instead of HalfSipHash-1-3. This is because in
64-bit code, SipHash-1-3 is no slower than HalfSipHash-1-3, and can be faster.
Note, this does *not* mean that in 64-bit kernels the hsiphash functions are the
same as the siphash ones, or that they are secure; the hsiphash functions still
use a less secure reduced-round algorithm and truncate their outputs to 32
bits.
Generating a hsiphash key
=========================
Keys should always be generated from a cryptographically secure source of
random numbers, either using get_random_bytes or get_random_once:
random numbers, either using get_random_bytes or get_random_once::
hsiphash_key_t key;
get_random_bytes(&key, sizeof(key));
hsiphash_key_t key;
get_random_bytes(&key, sizeof(key));
If you're not deriving your key from here, you're doing it wrong.
Using the HalfSipHash functions
===============================
Using the hsiphash functions
============================
There are two variants of the function, one that takes a list of integers, and
one that takes a buffer::
@ -183,7 +193,7 @@ You may then iterate like usual over the returned hash bucket.
Performance
===========
HalfSipHash is roughly 3 times slower than JenkinsHash. For many replacements,
this will not be a problem, as the hashtable lookup isn't the bottleneck. And
in general, this is probably a good sacrifice to make for the security and DoS
resistance of HalfSipHash.
hsiphash() is roughly 3 times slower than jhash(). For many replacements, this
will not be a problem, as the hashtable lookup isn't the bottleneck. And in
general, this is probably a good sacrifice to make for the security and DoS
resistance of hsiphash().

24
Documentation/virt/kvm/api.rst
View File

@ -5986,16 +5986,16 @@ should put the acknowledged interrupt vector into the 'epr' field.
#define KVM_SYSTEM_EVENT_RESET 2
#define KVM_SYSTEM_EVENT_CRASH 3
__u32 type;
__u64 flags;
__u32 ndata;
__u64 data[16];
} system_event;
If exit_reason is KVM_EXIT_SYSTEM_EVENT then the vcpu has triggered
a system-level event using some architecture specific mechanism (hypercall
or some special instruction). In case of ARM64, this is triggered using
HVC instruction based PSCI call from the vcpu. The 'type' field describes
the system-level event type. The 'flags' field describes architecture
specific flags for the system-level event.
HVC instruction based PSCI call from the vcpu.
The 'type' field describes the system-level event type.
Valid values for 'type' are:
- KVM_SYSTEM_EVENT_SHUTDOWN -- the guest has requested a shutdown of the
@ -6010,10 +6010,20 @@ Valid values for 'type' are:
to ignore the request, or to gather VM memory core dump and/or
reset/shutdown of the VM.
Valid flags are:
If KVM_CAP_SYSTEM_EVENT_DATA is present, the 'data' field can contain
architecture specific information for the system-level event. Only
the first `ndata` items (possibly zero) of the data array are valid.
- KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 (arm64 only) -- the guest issued
a SYSTEM_RESET2 call according to v1.1 of the PSCI specification.
- for arm64, data[0] is set to KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 if
the guest issued a SYSTEM_RESET2 call according to v1.1 of the PSCI
specification.
- for RISC-V, data[0] is set to the value of the second argument of the
``sbi_system_reset`` call.
Previous versions of Linux defined a `flags` member in this struct. The
field is now aliased to `data[0]`. Userspace can assume that it is only
written if ndata is greater than 0.
::

5
Documentation/vm/page_owner.rst
View File

@ -110,7 +110,7 @@ Usage
If you want to sort by the page nums of buf, use the ``-m`` parameter.
The detailed parameters are:
fundamental function:
fundamental function::
Sort:
-a Sort by memory allocation time.
@ -122,7 +122,7 @@ Usage
-s Sort by stack trace.
-t Sort by times (default).
additional function:
additional function::
Cull:
--cull <rules>
@ -153,6 +153,7 @@ Usage
STANDARD FORMAT SPECIFIERS
==========================
::
KEY LONG DESCRIPTION
p pid process ID

128
MAINTAINERS
View File

@ -2637,13 +2637,14 @@ F: sound/soc/rockchip/
N: rockchip
ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
R: Alim Akhtar <alim.akhtar@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
B: mailto:linux-samsung-soc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
F: Documentation/arm/samsung/
F: Documentation/devicetree/bindings/arm/samsung/
@ -3743,7 +3744,7 @@ F: include/linux/platform_data/b53.h
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
M: Nicolas Saenz Julienne <nsaenz@kernel.org>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@ -3758,7 +3759,7 @@ BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
S: Maintained
T: git git://github.com/broadcom/mach-bcm
F: arch/arm/mach-bcm/
@ -3778,7 +3779,7 @@ F: arch/mips/include/asm/mach-bcm47xx/*
BROADCOM BCM4908 ETHERNET DRIVER
M: Rafał Miłecki <rafal@milecki.pl>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
@ -3787,7 +3788,7 @@ F: drivers/net/ethernet/broadcom/unimac.h
BROADCOM BCM4908 PINMUX DRIVER
M: Rafał Miłecki <rafal@milecki.pl>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-gpio@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
@ -3797,7 +3798,7 @@ BROADCOM BCM5301X ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/bcm470*
@ -3808,7 +3809,7 @@ F: arch/arm/mach-bcm/bcm_5301x.c
BROADCOM BCM53573 ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
M: Rafał Miłecki <rafal@milecki.pl>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/bcm47189*
@ -3816,7 +3817,7 @@ F: arch/arm/boot/dts/bcm53573*
BROADCOM BCM63XX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://github.com/broadcom/stblinux.git
@ -3830,7 +3831,7 @@ F: drivers/usb/gadget/udc/bcm63xx_udc.*
BROADCOM BCM7XXX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://github.com/broadcom/stblinux.git
@ -3848,21 +3849,21 @@ N: bcm7120
BROADCOM BDC DRIVER
M: Al Cooper <alcooperx@gmail.com>
L: linux-usb@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
S: Maintained
F: Documentation/devicetree/bindings/usb/brcm,bdc.yaml
F: drivers/usb/gadget/udc/bdc/
BROADCOM BMIPS CPUFREQ DRIVER
M: Markus Mayer <mmayer@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-pm@vger.kernel.org
S: Maintained
F: drivers/cpufreq/bmips-cpufreq.c
BROADCOM BMIPS MIPS ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-mips@vger.kernel.org
S: Maintained
T: git git://github.com/broadcom/stblinux.git
@ -3913,7 +3914,9 @@ BROADCOM BNXT_EN 50 GIGABIT ETHERNET DRIVER
M: Michael Chan <michael.chan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/firmware/broadcom/tee_bnxt_fw.c
F: drivers/net/ethernet/broadcom/bnxt/
F: include/linux/firmware/broadcom/tee_bnxt_fw.h
BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
M: Arend van Spriel <aspriel@gmail.com>
@ -3928,53 +3931,53 @@ F: drivers/net/wireless/broadcom/brcm80211/
BROADCOM BRCMSTB GPIO DRIVER
M: Doug Berger <opendmb@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
S: Supported
F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
F: drivers/gpio/gpio-brcmstb.c
BROADCOM BRCMSTB I2C DRIVER
M: Kamal Dasu <kdasu.kdev@gmail.com>
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-i2c@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
S: Supported
F: Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
F: drivers/i2c/busses/i2c-brcmstb.c
BROADCOM BRCMSTB UART DRIVER
M: Al Cooper <alcooperx@gmail.com>
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-serial@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
F: drivers/tty/serial/8250/8250_bcm7271.c
BROADCOM BRCMSTB USB EHCI DRIVER
M: Al Cooper <alcooperx@gmail.com>
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-usb@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
F: drivers/usb/host/ehci-brcm.*
BROADCOM BRCMSTB USB PIN MAP DRIVER
M: Al Cooper <alcooperx@gmail.com>
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-usb@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
F: drivers/usb/misc/brcmstb-usb-pinmap.c
BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
M: Al Cooper <alcooperx@gmail.com>
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-kernel@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/phy/broadcom/phy-brcm-usb*
BROADCOM ETHERNET PHY DRIVERS
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
@ -3985,7 +3988,7 @@ F: include/linux/brcmphy.h
BROADCOM GENET ETHERNET DRIVER
M: Doug Berger <opendmb@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@ -3999,7 +4002,7 @@ F: include/linux/platform_data/mdio-bcm-unimac.h
BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://github.com/broadcom/stblinux.git
@ -4027,7 +4030,7 @@ N: stingray
BROADCOM IPROC GBIT ETHERNET DRIVER
M: Rafał Miłecki <rafal@milecki.pl>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/net/brcm,amac.yaml
@ -4036,7 +4039,7 @@ F: drivers/net/ethernet/broadcom/unimac.h
BROADCOM KONA GPIO DRIVER
M: Ray Jui <rjui@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
S: Supported
F: Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt
F: drivers/gpio/gpio-bcm-kona.c
@ -4069,7 +4072,7 @@ F: drivers/firmware/broadcom/*
BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
M: Rafał Miłecki <rafal@milecki.pl>
M: Florian Fainelli <f.fainelli@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-pm@vger.kernel.org
S: Maintained
T: git git://github.com/broadcom/stblinux.git
@ -4085,7 +4088,7 @@ F: include/linux/bcma/
BROADCOM SPI DRIVER
M: Kamal Dasu <kdasu.kdev@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
S: Maintained
F: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
F: drivers/spi/spi-bcm-qspi.*
@ -4094,7 +4097,7 @@ F: drivers/spi/spi-iproc-qspi.c
BROADCOM STB AVS CPUFREQ DRIVER
M: Markus Mayer <mmayer@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-pm@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@ -4102,7 +4105,7 @@ F: drivers/cpufreq/brcmstb*
BROADCOM STB AVS TMON DRIVER
M: Markus Mayer <mmayer@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-pm@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
@ -4110,7 +4113,7 @@ F: drivers/thermal/broadcom/brcmstb*
BROADCOM STB DPFE DRIVER
M: Markus Mayer <mmayer@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
@ -4119,8 +4122,8 @@ F: drivers/memory/brcmstb_dpfe.c
BROADCOM STB NAND FLASH DRIVER
M: Brian Norris <computersforpeace@gmail.com>
M: Kamal Dasu <kdasu.kdev@gmail.com>
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-mtd@lists.infradead.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mtd/nand/raw/brcmnand/
F: include/linux/platform_data/brcmnand.h
@ -4129,7 +4132,7 @@ BROADCOM STB PCIE DRIVER
M: Jim Quinlan <jim2101024@gmail.com>
M: Nicolas Saenz Julienne <nsaenz@kernel.org>
M: Florian Fainelli <f.fainelli@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@ -4137,7 +4140,7 @@ F: drivers/pci/controller/pcie-brcmstb.c
BROADCOM SYSTEMPORT ETHERNET DRIVER
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/broadcom/bcmsysport.*
@ -4154,7 +4157,7 @@ F: drivers/net/ethernet/broadcom/tg3.*
BROADCOM VK DRIVER
M: Scott Branden <scott.branden@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
S: Supported
F: drivers/misc/bcm-vk/
F: include/uapi/linux/misc/bcm_vk.h
@ -9337,14 +9340,12 @@ F: drivers/pci/hotplug/rpaphp*
IBM Power SRIOV Virtual NIC Device Driver
M: Dany Madden <drt@linux.ibm.com>
M: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
R: Thomas Falcon <tlfalcon@linux.ibm.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/ibm/ibmvnic.*
IBM Power Virtual Accelerator Switchboard
M: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
L: linuxppc-dev@lists.ozlabs.org
S: Supported
F: arch/powerpc/include/asm/vas.h
@ -10246,8 +10247,6 @@ F: drivers/net/ethernet/sgi/ioc3-eth.c
IOMAP FILESYSTEM LIBRARY
M: Christoph Hellwig <hch@infradead.org>
M: Darrick J. Wong <djwong@kernel.org>
M: linux-xfs@vger.kernel.org
M: linux-fsdevel@vger.kernel.org
L: linux-xfs@vger.kernel.org
L: linux-fsdevel@vger.kernel.org
S: Supported
@ -10378,6 +10377,7 @@ F: include/linux/isapnp.h
ISCSI
M: Lee Duncan <lduncan@suse.com>
M: Chris Leech <cleech@redhat.com>
M: Mike Christie <michael.christie@oracle.com>
L: open-iscsi@googlegroups.com
L: linux-scsi@vger.kernel.org
S: Maintained
@ -10555,6 +10555,7 @@ M: Andrey Ryabinin <ryabinin.a.a@gmail.com>
R: Alexander Potapenko <glider@google.com>
R: Andrey Konovalov <andreyknvl@gmail.com>
R: Dmitry Vyukov <dvyukov@google.com>
R: Vincenzo Frascino <vincenzo.frascino@arm.com>
L: kasan-dev@googlegroups.com
S: Maintained
F: Documentation/dev-tools/kasan.rst
@ -11914,7 +11915,7 @@ F: drivers/iio/proximity/mb1232.c
MAXIM MAX17040 FAMILY FUEL GAUGE DRIVERS
R: Iskren Chernev <iskren.chernev@gmail.com>
R: Krzysztof Kozlowski <krzk@kernel.org>
R: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
R: Marek Szyprowski <m.szyprowski@samsung.com>
R: Matheus Castello <matheus@castello.eng.br>
L: linux-pm@vger.kernel.org
@ -11924,7 +11925,7 @@ F: drivers/power/supply/max17040_battery.c
MAXIM MAX17042 FAMILY FUEL GAUGE DRIVERS
R: Hans de Goede <hdegoede@redhat.com>
R: Krzysztof Kozlowski <krzk@kernel.org>
R: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
R: Marek Szyprowski <m.szyprowski@samsung.com>
R: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
R: Purism Kernel Team <kernel@puri.sm>
@ -11976,10 +11977,11 @@ F: Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
F: drivers/power/supply/max77976_charger.c
MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
F: Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
F: drivers/power/supply/max14577_charger.c
@ -11987,10 +11989,11 @@ F: drivers/power/supply/max77693_charger.c
MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
M: Chanwoo Choi <cw00.choi@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/*/maxim,max14577.yaml
F: Documentation/devicetree/bindings/*/maxim,max77686.yaml
F: Documentation/devicetree/bindings/*/maxim,max77693.yaml
@ -12681,9 +12684,10 @@ F: mm/memblock.c
F: tools/testing/memblock/
MEMORY CONTROLLER DRIVERS
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
L: linux-kernel@vger.kernel.org
S: Maintained
B: mailto:krzysztof.kozlowski@linaro.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl.git
F: Documentation/devicetree/bindings/memory-controllers/
F: drivers/memory/
@ -13632,6 +13636,7 @@ F: net/core/drop_monitor.c
NETWORKING DRIVERS
M: "David S. Miller" <davem@davemloft.net>
M: Eric Dumazet <edumazet@google.com>
M: Jakub Kicinski <kuba@kernel.org>
M: Paolo Abeni <pabeni@redhat.com>
L: netdev@vger.kernel.org
@ -13679,6 +13684,7 @@ F: tools/testing/selftests/drivers/net/dsa/
NETWORKING [GENERAL]
M: "David S. Miller" <davem@davemloft.net>
M: Eric Dumazet <edumazet@google.com>
M: Jakub Kicinski <kuba@kernel.org>
M: Paolo Abeni <pabeni@redhat.com>
L: netdev@vger.kernel.org
@ -13825,10 +13831,11 @@ F: include/uapi/linux/nexthop.h
F: net/ipv4/nexthop.c
NFC SUBSYSTEM
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
L: linux-nfc@lists.01.org (subscribers-only)
L: netdev@vger.kernel.org
S: Maintained
B: mailto:linux-nfc@lists.01.org
F: Documentation/devicetree/bindings/net/nfc/
F: drivers/nfc/
F: include/linux/platform_data/nfcmrvl.h
@ -14142,7 +14149,7 @@ F: Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
F: drivers/regulator/pf8x00-regulator.c
NXP PTN5150A CC LOGIC AND EXTCON DRIVER
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@ -14695,7 +14702,7 @@ F: scripts/dtc/
OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
M: Rob Herring <robh+dt@kernel.org>
M: Krzysztof Kozlowski <krzk+dt@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
L: devicetree@vger.kernel.org
S: Maintained
C: irc://irc.libera.chat/devicetree
@ -15607,7 +15614,7 @@ F: drivers/pinctrl/renesas/
PIN CONTROLLER - SAMSUNG
M: Tomasz Figa <tomasz.figa@gmail.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
R: Alim Akhtar <alim.akhtar@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -15615,6 +15622,7 @@ L: linux-samsung-soc@vger.kernel.org
S: Maintained
C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
B: mailto:linux-samsung-soc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
F: Documentation/devicetree/bindings/pinctrl/samsung,pinctrl*yaml
F: drivers/pinctrl/samsung/
@ -17282,7 +17290,7 @@ W: http://www.ibm.com/developerworks/linux/linux390/
F: drivers/s390/scsi/zfcp_*
S3C ADC BATTERY DRIVER
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
L: linux-samsung-soc@vger.kernel.org
S: Odd Fixes
F: drivers/power/supply/s3c_adc_battery.c
@ -17327,15 +17335,16 @@ F: Documentation/admin-guide/LSM/SafeSetID.rst
F: security/safesetid/
SAMSUNG AUDIO (ASoC) DRIVERS
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/sound/samsung*
F: sound/soc/samsung/
SAMSUNG EXYNOS PSEUDO RANDOM NUMBER GENERATOR (RNG) DRIVER
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
L: linux-crypto@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Maintained
@ -17370,11 +17379,12 @@ S: Maintained
F: drivers/platform/x86/samsung-laptop.c
SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml
@ -17396,7 +17406,7 @@ F: drivers/media/platform/samsung/s3c-camif/
F: include/media/drv-intf/s3c_camif.h
SAMSUNG S3FWRN5 NFC DRIVER
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Krzysztof Opasiak <k.opasiak@samsung.com>
L: linux-nfc@lists.01.org (subscribers-only)
S: Maintained
@ -17418,7 +17428,7 @@ S: Supported
F: drivers/media/i2c/s5k5baf.c
SAMSUNG S5P Security SubSystem (SSS) DRIVER
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Vladimir Zapolskiy <vz@mleia.com>
L: linux-crypto@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
@ -17453,7 +17463,7 @@ F: include/linux/clk/samsung.h
F: include/linux/platform_data/clk-s3c2410.h
SAMSUNG SPI DRIVERS
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Andi Shyti <andi@etezian.org>
L: linux-spi@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
@ -17471,7 +17481,7 @@ F: drivers/net/ethernet/samsung/sxgbe/
SAMSUNG THERMAL DRIVER
M: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
L: linux-pm@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Maintained
@ -17655,8 +17665,8 @@ K: \bTIF_SECCOMP\b
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) Broadcom BRCMSTB DRIVER
M: Al Cooper <alcooperx@gmail.com>
R: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
L: linux-mmc@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mmc/host/sdhci-brcmstb*
@ -21440,6 +21450,15 @@ F: arch/x86/include/asm/uv/
F: arch/x86/kernel/apic/x2apic_uv_x.c
F: arch/x86/platform/uv/
X86 STACK UNWINDING
M: Josh Poimboeuf <jpoimboe@redhat.com>
M: Peter Zijlstra <peterz@infradead.org>
S: Supported
F: arch/x86/include/asm/unwind*.h
F: arch/x86/kernel/dumpstack.c
F: arch/x86/kernel/stacktrace.c
F: arch/x86/kernel/unwind_*.c
X86 VDSO
M: Andy Lutomirski <luto@kernel.org>
L: linux-kernel@vger.kernel.org
@ -21602,7 +21621,6 @@ F: drivers/xen/*swiotlb*
XFS FILESYSTEM
C: irc://irc.oftc.net/xfs
M: Darrick J. Wong <djwong@kernel.org>
M: linux-xfs@vger.kernel.org
L: linux-xfs@vger.kernel.org
S: Supported
W: http://xfs.org/

2
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 18
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc5
NAME = Superb Owl
# *DOCUMENTATION*

2
android/ACK_SHA
View File

@ -1 +1 @@
9466228563061204189fd00d43a35c4b617c9b55
bbe44ba33044b0c43cc45ef9f7fff4c9a0beee37

26729
android/abi_gki_aarch64.xml
View File

File diff suppressed because it is too large Load Diff

2
android/abi_gki_aarch64_qcom
View File

@ -345,6 +345,7 @@
__devm_regmap_init_mmio_clk
devm_regulator_bulk_get
devm_regulator_get
devm_regulator_get_exclusive
devm_regulator_get_optional
devm_regulator_register
devm_regulator_register_notifier
@ -524,6 +525,7 @@
flush_delayed_work
flush_work
flush_workqueue
fortify_panic
fput
free_io_pgtable_ops
free_irq

6
arch/Kconfig
View File

@ -854,10 +854,8 @@ config HAVE_ARCH_HUGE_VMAP
#
# Archs that select this would be capable of PMD-sized vmaps (i.e.,
# arch_vmap_pmd_supported() returns true), and they must make no assumptions
# that vmalloc memory is mapped with PAGE_SIZE ptes. The VM_NO_HUGE_VMAP flag
# can be used to prohibit arch-specific allocations from using hugepages to
# help with this (e.g., modules may require it).
# arch_vmap_pmd_supported() returns true). The VM_ALLOW_HUGE_VMAP flag
# must be used to enable allocations to use hugepages.
#
config HAVE_ARCH_HUGE_VMALLOC
depends on HAVE_ARCH_HUGE_VMAP

2
arch/arc/boot/dts/hsdk.dts
View File

@ -275,7 +275,7 @@ spi0: spi@20000 {
cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
<&creg_gpio 1 GPIO_ACTIVE_LOW>;
spi-flash@0 {
flash@0 {
compatible = "sst26wf016b", "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;

32
arch/arc/include/asm/atomic-llsc.h
View File

@ -5,7 +5,7 @@
#define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
#define ATOMIC_OP(op, c_op, asm_op) \
#define ATOMIC_OP(op, asm_op) \
static inline void arch_atomic_##op(int i, atomic_t *v) \
{ \
unsigned int val; \
@ -21,7 +21,7 @@ static inline void arch_atomic_##op(int i, atomic_t *v) \
: "cc"); \
} \
#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
#define ATOMIC_OP_RETURN(op, asm_op) \
static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v) \
{ \
unsigned int val; \
@ -42,7 +42,7 @@ static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v) \
#define arch_atomic_add_return_relaxed arch_atomic_add_return_relaxed
#define arch_atomic_sub_return_relaxed arch_atomic_sub_return_relaxed
#define ATOMIC_FETCH_OP(op, c_op, asm_op) \
#define ATOMIC_FETCH_OP(op, asm_op) \
static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v) \
{ \
unsigned int val, orig; \
@ -69,23 +69,23 @@ static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v) \
#define arch_atomic_fetch_or_relaxed arch_atomic_fetch_or_relaxed
#define arch_atomic_fetch_xor_relaxed arch_atomic_fetch_xor_relaxed
#define ATOMIC_OPS(op, c_op, asm_op) \
ATOMIC_OP(op, c_op, asm_op) \
ATOMIC_OP_RETURN(op, c_op, asm_op) \
ATOMIC_FETCH_OP(op, c_op, asm_op)
#define ATOMIC_OPS(op, asm_op) \
ATOMIC_OP(op, asm_op) \
ATOMIC_OP_RETURN(op, asm_op) \
ATOMIC_FETCH_OP(op, asm_op)
ATOMIC_OPS(add, +=, add)
ATOMIC_OPS(sub, -=, sub)
ATOMIC_OPS(add, add)
ATOMIC_OPS(sub, sub)
#undef ATOMIC_OPS
#define ATOMIC_OPS(op, c_op, asm_op) \
ATOMIC_OP(op, c_op, asm_op) \
ATOMIC_FETCH_OP(op, c_op, asm_op)
#define ATOMIC_OPS(op, asm_op) \
ATOMIC_OP(op, asm_op) \
ATOMIC_FETCH_OP(op, asm_op)
ATOMIC_OPS(and, &=, and)
ATOMIC_OPS(andnot, &= ~, bic)
ATOMIC_OPS(or, |=, or)
ATOMIC_OPS(xor, ^=, xor)
ATOMIC_OPS(and, and)
ATOMIC_OPS(andnot, bic)
ATOMIC_OPS(or, or)
ATOMIC_OPS(xor, xor)
#define arch_atomic_andnot arch_atomic_andnot

3
arch/arc/include/asm/pgtable-levels.h
View File

@ -98,9 +98,6 @@
/*
* 1st level paging: pgd
*/
#define pgd_index(addr) ((addr) >> PGDIR_SHIFT)
#define pgd_offset(mm, addr) (((mm)->pgd) + pgd_index(addr))
#define pgd_offset_k(addr) pgd_offset(&init_mm, addr)
#define pgd_ERROR(e) \
pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))

3
arch/arc/kernel/disasm.c
View File

@ -366,7 +366,7 @@ void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
case op_SP: /* LD_S|LDB_S b,[sp,u7], ST_S|STB_S b,[sp,u7] */
/* note: we are ignoring possibility of:
* ADD_S, SUB_S, PUSH_S, POP_S as these should not
* cause unaliged exception anyway */
* cause unaligned exception anyway */
state->write = BITS(state->words[0], 6, 6);
state->zz = BITS(state->words[0], 5, 5);
if (state->zz)
@ -503,7 +503,6 @@ int __kprobes disasm_next_pc(unsigned long pc, struct pt_regs *regs,
{
struct disasm_state instr;
memset(&instr, 0, sizeof(struct disasm_state));
disasm_instr(pc, &instr, 0, regs, cregs);
*next_pc = pc + instr.instr_len;

1
arch/arc/kernel/entry.S
View File

@ -196,6 +196,7 @@ tracesys_exit:
st r0, [sp, PT_r0] ; sys call return value in pt_regs
;POST Sys Call Ptrace Hook
mov r0, sp ; pt_regs needed
bl @syscall_trace_exit
b ret_from_exception ; NOT ret_from_system_call at is saves r0 which
; we'd done before calling post hook above

2
arch/arc/kernel/signal.c
View File

@ -319,7 +319,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
regs->ret = (unsigned long)ksig->ka.sa.sa_handler;
/*
* handler returns using sigreturn stub provided already by userpsace
* handler returns using sigreturn stub provided already by userspace
* If not, nuke the process right away
*/
if(!(ksig->ka.sa.sa_flags & SA_RESTORER))

4
arch/arc/kernel/smp.c
View File

@ -35,7 +35,7 @@ EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
struct plat_smp_ops __weak plat_smp_ops;
/* XXX: per cpu ? Only needed once in early seconday boot */
/* XXX: per cpu ? Only needed once in early secondary boot */
struct task_struct *secondary_idle_tsk;
/* Called from start_kernel */
@ -274,7 +274,7 @@ static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
* and read back old value
*/
do {
new = old = READ_ONCE(*ipi_data_ptr);
new = old = *ipi_data_ptr;
new |= 1U << msg;
} while (cmpxchg(ipi_data_ptr, old, new) != old);

2
arch/arc/kernel/unaligned.c
View File

@ -237,7 +237,7 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
if (state.fault)
goto fault;
/* clear any remanants of delay slot */
/* clear any remnants of delay slot */
if (delay_mode(regs)) {
regs->ret = regs->bta & ~1U;
regs->status32 &= ~STATUS_DE_MASK;

2
arch/arc/mm/cache.c
View File

@ -401,7 +401,7 @@ static inline void __before_dc_op(const int op)
{
if (op == OP_FLUSH_N_INV) {
/* Dcache provides 2 cmd: FLUSH or INV
* INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
* INV in turn has sub-modes: DISCARD or FLUSH-BEFORE
* flush-n-inv is achieved by INV cmd but with IM=1
* So toggle INV sub-mode depending on op request and default
*/

2
arch/arm/boot/dts/am33xx-l4.dtsi
View File

@ -263,6 +263,8 @@ tscadc: tscadc@0 {
compatible = "ti,am3359-tscadc";
reg = <0x0 0x1000>;
interrupts = <16>;
clocks = <&adc_tsc_fck>;
clock-names = "fck";
status = "disabled";
dmas = <&edma 53 0>, <&edma 57 0>;
dma-names = "fifo0", "fifo1";

45
arch/arm/boot/dts/am3517-evm.dts
View File

@ -161,6 +161,8 @@ pwm11: dmtimer-pwm@11 {
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
#phy-cells = <0>;
@ -168,7 +170,9 @@ hsusb1_phy: hsusb1_phy {
};
&davinci_emac {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ethernet_pins>;
status = "okay";
};
&davinci_mdio {
@ -193,6 +197,8 @@ dpi_out: endpoint {
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
/* User DIP swithes [1:8] / User LEDS [1:2] */
tca6416: gpio@21 {
@ -205,6 +211,8 @@ tca6416: gpio@21 {
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
@ -223,6 +231,8 @@ &mmc3 {
};
&usbhshost {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_pins>;
port1-mode = "ehci-phy";
};
@ -231,8 +241,35 @@ &usbhsehci {
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
ethernet_pins: pinmux_ethernet_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
@ -300,8 +337,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_pins>;
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <

9
arch/arm/boot/dts/am3517-som.dtsi
View File

@ -69,6 +69,8 @@ nand@0,0 {
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
s35390a: s35390a@30 {
@ -179,6 +181,13 @@ bluetooth {
&omap3_pmx_core {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */

2
arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
View File

@ -44,7 +44,7 @@ &spi0 {
status = "okay";
/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
spi-flash@0 {
flash@0 {
compatible = "mxicy,mx25u4035", "jedec,spi-nor";
spi-max-frequency = <33000000>;
reg = <0>;

2
arch/arm/boot/dts/at91-q5xr5.dts
View File

@ -125,7 +125,7 @@ &spi0 {
cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;

2
arch/arm/boot/dts/at91-sam9_l9260.dts
View File

@ -101,7 +101,7 @@ pinctrl_board_mmc0: mmc0-board {
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt = <1>;
nand-on-flash-bbt;
status = "okay";
};

2
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
View File

@ -214,7 +214,7 @@ &qspi1 {
pinctrl-0 = <&pinctrl_qspi1_default>;
status = "disabled";
qspi1_flash: spi_flash@0 {
qspi1_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";

2
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
View File

@ -191,7 +191,7 @@ &pwm0 {
&qspi1 {
status = "okay";
qspi1_flash: spi_flash@0 {
qspi1_flash: flash@0 {
status = "okay";
};
};

2
arch/arm/boot/dts/at91-sama5d2_xplained.dts
View File

@ -137,7 +137,7 @@ spi0: spi@f8000000 {
pinctrl-0 = <&pinctrl_spi0_default>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
reg = <0>;
spi-max-frequency = <50000000>;

8
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View File

@ -57,8 +57,8 @@ slot@0 {
};
spi0: spi@f0004000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi0_cs>;
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
};
@ -171,8 +171,8 @@ slot@0 {
};
spi1: spi@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioC 25 0>;
status = "okay";
};

2
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
View File

@ -49,7 +49,7 @@ spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

6
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View File

@ -81,8 +81,8 @@ usart4: serial@fc010000 {
};
spi1: spi@fc018000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioB 21 0>;
status = "okay";
};
@ -140,7 +140,7 @@ pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
pinctrl_spi0_cs: spi0_cs_default {
pinctrl_spi1_cs: spi1_cs_default {
atmel,pins =
<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};

2
arch/arm/boot/dts/at91-sama5d4ek.dts
View File

@ -65,7 +65,7 @@ ssc0: ssc@f8008000 {
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

4
arch/arm/boot/dts/at91-sama7g5ek.dts
View File

@ -495,7 +495,7 @@ pinctrl_flx0_default: flx0_default {
pinctrl_flx3_default: flx3_default {
pinmux = <PIN_PD16__FLEXCOM3_IO0>,
<PIN_PD17__FLEXCOM3_IO1>;
bias-disable;
bias-pull-up;
};
pinctrl_flx4_default: flx4_default {
@ -655,7 +655,7 @@ pinctrl_qspi: qspi {
<PIN_PB21__QSPI0_INT>;
bias-disable;
slew-rate = <0>;
atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>;
atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
};
pinctrl_sdmmc0_default: sdmmc0_default {

2
arch/arm/boot/dts/at91-vinco.dts
View File

@ -59,7 +59,7 @@ slot@0 {
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "n25q32b", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;

4
arch/arm/boot/dts/at91rm9200ek.dts
View File

@ -73,7 +73,7 @@ &pinctrl_uart1_dcd
spi0: spi@fffe0000 {
status = "okay";
cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <15000000>;
reg = <0>;
@ -94,7 +94,7 @@ usb0: ohci@300000 {
status = "okay";
};
nor_flash@10000000 {
flash@10000000 {
compatible = "cfi-flash";
reg = <0x10000000 0x800000>;
linux,mtd-name = "physmap-flash.0";

2
arch/arm/boot/dts/at91sam9260ek.dts
View File

@ -92,7 +92,7 @@ macb0: ethernet@fffc4000 {
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
mtd_dataflash@1 {
flash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;

2
arch/arm/boot/dts/at91sam9261ek.dts
View File

@ -145,7 +145,7 @@ spi0: spi@fffc8000 {
cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
status = "okay";
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
reg = <0>;
spi-max-frequency = <15000000>;

2
arch/arm/boot/dts/at91sam9263ek.dts
View File

@ -95,7 +95,7 @@ pinctrl_board_mmc0: mmc0-board {
spi0: spi@fffa4000 {
status = "okay";
cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <0>;

45
arch/arm/boot/dts/at91sam9g20ek_common.dtsi
View File

@ -110,7 +110,7 @@ ssc0: ssc@fffbc000 {
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
mtd_dataflash@1 {
flash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
@ -214,11 +214,23 @@ i2c-gpio-0 {
24c512@50 {
compatible = "atmel,24c512";
reg = <0x50>;
vcc-supply = <&reg_3v3>;
};
wm8731: wm8731@1b {
compatible = "wm8731";
reg = <0x1b>;
/* PCK0 at 12MHz */
clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "mclk";
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
assigned-clock-rates = <12000000>;
HPVDD-supply = <&vcc_dac>;
AVDD-supply = <&vcc_dac>;
DCVDD-supply = <&reg_3v3>;
DBVDD-supply = <&reg_3v3>;
};
};
@ -254,4 +266,35 @@ sound {
atmel,ssc-controller = <&ssc0>;
atmel,audio-codec = <&wm8731>;
};
reg_5v: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_3v3: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "3V3";
vin-supply = <&reg_5v>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_1v: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "1V";
vin-supply = <&reg_5v>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vcc_dac: fixedregulator3 {
compatible = "regulator-fixed";
regulator-name = "VCC_DAC";
vin-supply = <&reg_3v3>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};

2
arch/arm/boot/dts/at91sam9m10g45ek.dts
View File

@ -167,7 +167,7 @@ pinctrl_pwm_leds: pwm-led {
spi0: spi@fffa4000{
status = "okay";
cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <13000000>;
reg = <0>;

2
arch/arm/boot/dts/at91sam9n12ek.dts
View File

@ -119,7 +119,7 @@ pinctrl_usb1_vbus_sense: usb1_vbus_sense {
spi0: spi@f0000000 {
status = "okay";
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

2
arch/arm/boot/dts/at91sam9rlek.dts
View File

@ -180,7 +180,7 @@ usb0: gadget@fffd4000 {
spi0: spi@fffcc000 {
status = "okay";
cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <15000000>;
reg = <0>;

2
arch/arm/boot/dts/at91sam9x5ek.dtsi
View File

@ -125,7 +125,7 @@ &spi0 {
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
status = "disabled"; /* conflicts with mmc1 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

2
arch/arm/boot/dts/da850-evm.dts
View File

@ -278,7 +278,7 @@ &spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
flash: m25p80@0 {
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";

2
arch/arm/boot/dts/dm8168-evm.dts
View File

@ -177,7 +177,7 @@ &mcspi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
m25p80@0 {
flash@0 {
compatible = "w25x32";
spi-max-frequency = <48000000>;
reg = <0>;

4
arch/arm/boot/dts/dra7-l4.dtsi
View File

@ -4188,11 +4188,11 @@ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
reg = <0x1d0010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
<SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
power-domains = <&prm_vpe>;
clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;

2
arch/arm/boot/dts/imx28-ts4600.dts
View File

@ -26,7 +26,7 @@ ssp0: spi@80010000 {
pinctrl-0 = <&mmc0_4bit_pins_a
&mmc0_sck_cfg
&en_sd_pwr>;
broken-cd = <1>;
broken-cd;
bus-width = <4>;
vmmc-supply = <&reg_vddio_sd0>;
status = "okay";

10
arch/arm/boot/dts/imx6qdl-apalis.dtsi
View File

@ -286,6 +286,8 @@ vgen6_reg: vgen6 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_module_3v3_audio>;
VDDIO-supply = <&reg_module_3v3>;
@ -517,8 +519,6 @@ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
/* SGTL5000 sys_mclk */
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
@ -811,6 +811,12 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
>;
};
pinctrl_sgtl5000: sgtl5000grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0

32
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
View File

@ -154,112 +154,112 @@ pmic@58 {
regulators {
bcore1 {
regulator-name = "bcore1";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bcore2 {
regulator-name = "bcore2";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bpro {
regulator-name = "bpro";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bperi {
regulator-name = "bperi";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bmem {
regulator-name = "bmem";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo2 {
regulator-name = "ldo2";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1800000>;
};
ldo3 {
regulator-name = "ldo3";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo4 {
regulator-name = "ldo4";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo5 {
regulator-name = "ldo5";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo6 {
regulator-name = "ldo6";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo7 {
regulator-name = "ldo7";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo8 {
regulator-name = "ldo8";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo9 {
regulator-name = "ldo9";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo10 {
regulator-name = "ldo10";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
ldo11 {
regulator-name = "ldo11";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <3300000>;
};
bio {
regulator-name = "bio";
regulator-always-on = <1>;
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

4
arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
View File

@ -72,8 +72,8 @@ stmpe_touchscreen {
st,settling = <2>;
st,fraction-z = <7>;
st,i-drive = <1>;
touchscreen-inverted-x = <1>;
touchscreen-inverted-y = <1>;
touchscreen-inverted-x;
touchscreen-inverted-y;
};
};
};

2
arch/arm/boot/dts/imx6ull-colibri.dtsi
View File

@ -37,7 +37,7 @@ reg_module_3v3_avdd: regulator-module-3v3-avdd {
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-gpio";
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_reg_sd>;
regulator-always-on;

15
arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
View File

@ -11,3 +11,18 @@ / {
model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};

15
arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
View File

@ -11,3 +11,18 @@ / {
model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};

15
arch/arm/boot/dts/logicpd-som-lv.dtsi
View File

@ -265,21 +265,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
};
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};
&uart2 {
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
pinctrl-names = "default";

4
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
View File

@ -118,8 +118,8 @@ usb@6,0 {
gpmc,device-width = <2>;
gpmc,wait-pin = <0>;
gpmc,burst-length = <4>;
gpmc,cycle2cycle-samecsen = <1>;
gpmc,cycle2cycle-diffcsen = <1>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <45>;
gpmc,cs-wr-off-ns = <45>;

2
arch/arm/boot/dts/omap3-gta04.dtsi
View File

@ -31,6 +31,8 @@ chosen {
aliases {
display0 = &lcd;
display1 = &tv0;
/delete-property/ mmc2;
/delete-property/ mmc3;
};
ldo_3v3: fixedregulator {

12
arch/arm/boot/dts/qcom-apq8064-pins.dtsi
View File

@ -76,7 +76,7 @@ mux {
pinconf {
pins = "gpio20", "gpio21";
drive-strength = <2>;
bias-disable = <0>;
bias-disable;
};
};
@ -116,7 +116,7 @@ mux {
pinconf {
pins = "gpio24", "gpio25";
drive-strength = <2>;
bias-disable = <0>;
bias-disable;
};
};
@ -141,7 +141,7 @@ mux {
pinconf {
pins = "gpio8", "gpio9";
drive-strength = <2>;
bias-disable = <0>;
bias-disable;
};
};
@ -166,7 +166,7 @@ mux {
pinconf {
pins = "gpio12", "gpio13";
drive-strength = <2>;
bias-disable = <0>;
bias-disable;
};
};
@ -229,7 +229,7 @@ mux {
pinconf {
pins = "gpio16", "gpio17";
drive-strength = <2>;
bias-disable = <0>;
bias-disable;
};
};
@ -282,7 +282,7 @@ mux {
pinconf {
pins = "gpio84", "gpio85";
drive-strength = <2>;
bias-disable = <0>;
bias-disable;
};
};

8
arch/arm/boot/dts/qcom-ipq8064.dtsi
View File

@ -972,7 +972,7 @@ gmac0: ethernet@37000000 {
snps,axi-config = <&stmmac_axi_setup>;
snps,pbl = <32>;
snps,aal = <1>;
snps,aal;
qcom,nss-common = <&nss_common>;
qcom,qsgmii-csr = <&qsgmii_csr>;
@ -996,7 +996,7 @@ gmac1: ethernet@37200000 {
snps,axi-config = <&stmmac_axi_setup>;
snps,pbl = <32>;
snps,aal = <1>;
snps,aal;
qcom,nss-common = <&nss_common>;
qcom,qsgmii-csr = <&qsgmii_csr>;
@ -1020,7 +1020,7 @@ gmac2: ethernet@37400000 {
snps,axi-config = <&stmmac_axi_setup>;
snps,pbl = <32>;
snps,aal = <1>;
snps,aal;
qcom,nss-common = <&nss_common>;
qcom,qsgmii-csr = <&qsgmii_csr>;
@ -1044,7 +1044,7 @@ gmac3: ethernet@37600000 {
snps,axi-config = <&stmmac_axi_setup>;
snps,pbl = <32>;
snps,aal = <1>;
snps,aal;
qcom,nss-common = <&nss_common>;
qcom,qsgmii-csr = <&qsgmii_csr>;

2
arch/arm/boot/dts/sama5d3xmb.dtsi
View File

@ -26,7 +26,7 @@ slot@0 {
spi0: spi@f0004000 {
dmas = <0>, <0>; /* Do not use DMA for spi0 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

2
arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
View File

@ -25,7 +25,7 @@ slot@0 {
spi0: spi@f0004000 {
dmas = <0>, <0>; /* Do not use DMA for spi0 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;

18
arch/arm/boot/dts/sama7g5.dtsi
View File

@ -601,9 +601,9 @@ i2c1: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
<&dma0 AT91_XDMAC_DT_PERID(8)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
<&dma0 AT91_XDMAC_DT_PERID(7)>;
dma-names = "tx", "rx";
status = "disabled";
};
};
@ -786,9 +786,9 @@ i2c8: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
<&dma0 AT91_XDMAC_DT_PERID(22)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
<&dma0 AT91_XDMAC_DT_PERID(21)>;
dma-names = "tx", "rx";
status = "disabled";
};
};
@ -810,9 +810,9 @@ i2c9: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
<&dma0 AT91_XDMAC_DT_PERID(24)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
<&dma0 AT91_XDMAC_DT_PERID(23)>;
dma-names = "tx", "rx";
status = "disabled";
};
};

2
arch/arm/boot/dts/spear1310-evb.dts
View File

@ -379,7 +379,7 @@ stmpe_touchscreen {
};
};
m25p80@1 {
flash@1 {
compatible = "st,m25p80";
reg = <1>;
spi-max-frequency = <12000000>;

2
arch/arm/boot/dts/spear1340-evb.dts
View File

@ -439,7 +439,7 @@ spi0: spi@e0100000 {
cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
<&gpiopinctrl 85 0>;
m25p80@0 {
flash@0 {
compatible = "m25p80";
reg = <0>;
spi-max-frequency = <12000000>;

2
arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
View File

@ -398,7 +398,7 @@ &qspi {
#size-cells = <0>;
status = "okay";
flash0: is25lp016d@0 {
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <133000000>;

4
arch/arm/boot/dts/stm32mp157c-ev1.dts
View File

@ -262,7 +262,7 @@ &qspi {
#size-cells = <0>;
status = "okay";
flash0: mx66l51235l@0 {
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
@ -271,7 +271,7 @@ flash0: mx66l51235l@0 {
#size-cells = <1>;
};
flash1: mx66l51235l@1 {
flash1: flash@1 {
compatible = "jedec,spi-nor";
reg = <1>;
spi-rx-bus-width = <4>;

2
arch/arm/boot/dts/usb_a9263.dts
View File

@ -60,7 +60,7 @@ usb1: gadget@fff78000 {
spi0: spi@fffa4000 {
cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
status = "okay";
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
reg = <0>;
spi-max-frequency = <15000000>;

5
arch/arm/configs/gemini_defconfig
View File

@ -49,11 +49,13 @@ CONFIG_ATA=y
CONFIG_PATA_FTIDE010=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=y
CONFIG_GEMINI_ETHERNET=y
CONFIG_MARVELL_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_MARVELL_PHY=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
@ -66,6 +68,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=y
CONFIG_SENSORS_DRIVETEMP=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_LM75=y
CONFIG_THERMAL=y

365
arch/arm/configs/imote2_defconfig
View File

@ -1,365 +0,0 @@
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_EXPERT=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_PXA=y
CONFIG_MACH_INTELMOTE2=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_APM_EMULATION=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_BRIDGE=m
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_IEEE802154=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_FW_LOADER=m
CONFIG_CONNECTOR=m
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PXA2XX=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_WLAN is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_PXA27x=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=8
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PXA=y
CONFIG_SPI=y
CONFIG_SPI_PXA2XX=y
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_PMIC_DA903X=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_DA903X=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
CONFIG_MEDIA_TUNER_CUSTOMISE=y
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not set
# CONFIG_MEDIA_TUNER_TDA9887 is not set
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_MC44S803 is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_PXA27x=y
# CONFIG_V4L_USB_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
CONFIG_FB_PXA=y
CONFIG_FB_PXA_OVERLAY=y
CONFIG_FB_PXA_PARAMETERS=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_PXA2XX_SOC=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
CONFIG_SDIO_UART=m
CONFIG_MMC_PXA=y
CONFIG_MMC_SPI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PXA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=m
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_ROMFS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFSD=m
CONFIG_NFSD_V3_ACL=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_PROVE_LOCKING=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC16=y

1
arch/arm/configs/multi_v7_defconfig
View File

@ -673,6 +673,7 @@ CONFIG_VIDEO_STI_DELTA=m
CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_JPU=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_VIDEO_TEGRA_VDE=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_ADV7180=m

3
arch/arm/configs/tegra_defconfig
View File

@ -286,7 +286,8 @@ CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
CONFIG_STAGING_MEDIA=y
CONFIG_TEGRA_VDE=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_TEGRA_VDE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=m

19
arch/arm/configs/u8500_defconfig
View File

@ -20,7 +20,6 @@ CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMA=y
CONFIG_NET=y
@ -41,6 +40,8 @@ CONFIG_MAC80211_LEDS=y
CONFIG_CAIF=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_GNSS=y
CONFIG_GNSS_SIRF_SERIAL=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_NETDEVICES=y
@ -83,6 +84,8 @@ CONFIG_SPI_GPIO=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_BATTERY_SAMSUNG_SDI=y
CONFIG_AB8500_BM=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_THERMAL=y
@ -98,10 +101,13 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_V4L2_FLASH_LED_CLASS=y
CONFIG_DRM=y
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
CONFIG_DRM_PANEL_NOVATEK_NT35560=y
CONFIG_DRM_PANEL_SAMSUNG_DB7430=y
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
CONFIG_DRM_PANEL_SONY_ACX424AKP=y
CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y
CONFIG_DRM_LIMA=y
CONFIG_DRM_MCDE=y
CONFIG_FB=y
@ -129,6 +135,7 @@ CONFIG_LEDS_LM3530=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_RT8515=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
@ -144,17 +151,22 @@ CONFIG_IIO_SW_TRIGGER=y
CONFIG_BMA180=y
CONFIG_BMC150_ACCEL=y
CONFIG_IIO_ST_ACCEL_3AXIS=y
# CONFIG_IIO_ST_ACCEL_SPI_3AXIS is not set
CONFIG_IIO_RESCALE=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
# CONFIG_IIO_ST_GYRO_SPI_3AXIS is not set
CONFIG_INV_MPU6050_I2C=y
CONFIG_BH1780=y
CONFIG_GP2AP002=y
CONFIG_TSL2772=y
CONFIG_AK8974=y
CONFIG_IIO_ST_MAGN_3AXIS=y
# CONFIG_IIO_ST_MAGN_SPI_3AXIS is not set
CONFIG_YAMAHA_YAS530=y
CONFIG_IIO_HRTIMER_TRIGGER=y
CONFIG_IIO_ST_PRESS=y
# CONFIG_IIO_ST_PRESS_SPI is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@ -173,10 +185,9 @@ CONFIG_CRYPTO_DEV_UX500_CRYP=y
CONFIG_CRYPTO_DEV_UX500_HASH=y
CONFIG_CRYPTO_DEV_UX500_DEBUG=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y

4
arch/arm/mach-davinci/board-da850-evm.c
View File

@ -1101,11 +1101,13 @@ static int __init da850_evm_config_emac(void)
int ret;
u32 val;
struct davinci_soc_info *soc_info = &davinci_soc_info;
u8 rmii_en = soc_info->emac_pdata->rmii_en;
u8 rmii_en;
if (!machine_is_davinci_da850_evm())
return 0;
rmii_en = soc_info->emac_pdata->rmii_en;
cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
val = __raw_readl(cfg_chip3_base);

6
arch/arm/mach-ep93xx/clock.c
View File

@ -148,8 +148,10 @@ static struct clk_hw *ep93xx_clk_register_gate(const char *name,
psc->lock = &clk_lock;
clk = clk_register(NULL, &psc->hw);
if (IS_ERR(clk))
if (IS_ERR(clk)) {
kfree(psc);
return ERR_CAST(clk);
}
return &psc->hw;
}
@ -207,7 +209,7 @@ static int ep93xx_mux_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
unsigned long rate = req->rate;
struct clk *best_parent = 0;
struct clk *best_parent = NULL;
unsigned long __parent_rate;
unsigned long best_rate = 0, actual_rate, mclk_rate;
unsigned long best_parent_rate;

1
arch/arm/mach-exynos/Kconfig
View File

@ -17,7 +17,6 @@ menuconfig ARCH_EXYNOS
select EXYNOS_PMU
select EXYNOS_SROM
select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
select GPIOLIB
select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
select HAVE_ARM_SCU if SMP
select PINCTRL

2
arch/arm/mach-iop32x/cp6.c
View File

@ -7,6 +7,8 @@
#include <asm/traps.h>
#include <asm/ptrace.h>
#include "iop3xx.h"
void iop_enable_cp6(void)
{
u32 temp;

2
arch/arm/mach-omap2/omap4-common.c
View File

@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
gic_dist_base_addr = of_iomap(np, 0);
of_node_put(np);
WARN_ON(!gic_dist_base_addr);
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
twd_base = of_iomap(np, 0);
of_node_put(np);
WARN_ON(!twd_base);
skip_errata_init:

28
arch/arm/mach-vexpress/spc.c
View File

@ -122,13 +122,13 @@ static inline bool cluster_is_a15(u32 cluster)
}
/**
* ve_spc_global_wakeup_irq()
* ve_spc_global_wakeup_irq() - sets/clears global wakeup IRQs
*
* @set: if true, global wake-up IRQs are set, if false they are cleared
*
* Function to set/clear global wakeup IRQs. Not protected by locking since
* it might be used in code paths where normal cacheable locks are not
* working. Locking must be provided by the caller to ensure atomicity.
*
* @set: if true, global wake-up IRQs are set, if false they are cleared
*/
void ve_spc_global_wakeup_irq(bool set)
{
@ -145,15 +145,15 @@ void ve_spc_global_wakeup_irq(bool set)
}
/**
* ve_spc_cpu_wakeup_irq()
*
* Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
* it might be used in code paths where normal cacheable locks are not
* working. Locking must be provided by the caller to ensure atomicity.
* ve_spc_cpu_wakeup_irq() - sets/clears per-CPU wake-up IRQs
*
* @cluster: mpidr[15:8] bitfield describing cluster affinity level
* @cpu: mpidr[7:0] bitfield describing cpu affinity level
* @set: if true, wake-up IRQs are set, if false they are cleared
*
* Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
* it might be used in code paths where normal cacheable locks are not
* working. Locking must be provided by the caller to ensure atomicity.
*/
void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set)
{
@ -200,14 +200,14 @@ void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr)
}
/**
* ve_spc_powerdown()
* ve_spc_powerdown() - enables/disables cluster powerdown
*
* @cluster: mpidr[15:8] bitfield describing cluster affinity level
* @enable: if true enables powerdown, if false disables it
*
* Function to enable/disable cluster powerdown. Not protected by locking
* since it might be used in code paths where normal cacheable locks are not
* working. Locking must be provided by the caller to ensure atomicity.
*
* @cluster: mpidr[15:8] bitfield describing cluster affinity level
* @enable: if true enables powerdown, if false disables it
*/
void ve_spc_powerdown(u32 cluster, bool enable)
{
@ -228,7 +228,7 @@ static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
}
/**
* ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
* ve_spc_cpu_in_wfi() - Checks if the specified CPU is in WFI or not
*
* @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
* @cluster: mpidr[15:8] bitfield describing cluster affinity level
@ -580,7 +580,7 @@ static int __init ve_spc_clk_init(void)
}
cluster = topology_physical_package_id(cpu_dev->id);
if (init_opp_table[cluster])
if (cluster < 0 || init_opp_table[cluster])
continue;
if (ve_init_opp_table(cpu_dev))

9
arch/arm/xen/enlighten.c
View File

@ -337,12 +337,15 @@ int __init arch_xen_unpopulated_init(struct resource **res)
if (!nr_reg) {
pr_err("No extended regions are found\n");
of_node_put(np);
return -EINVAL;
}
regs = kcalloc(nr_reg, sizeof(*regs), GFP_KERNEL);
if (!regs)
if (!regs) {
of_node_put(np);
return -ENOMEM;
}
/*
* Create resource from extended regions provided by the hypervisor to be
@ -403,8 +406,8 @@ int __init arch_xen_unpopulated_init(struct resource **res)
*res = &xen_resource;
err:
of_node_put(np);
kfree(regs);
return rc;
}
#endif
@ -424,8 +427,10 @@ static void __init xen_dt_guest_init(void)
if (of_address_to_resource(xen_node, GRANT_TABLE_INDEX, &res)) {
pr_err("Xen grant table region is not found\n");
of_node_put(xen_node);
return;
}
of_node_put(xen_node);
xen_grant_frames = res.start;
}

15
arch/arm64/Kconfig
View File

@ -175,8 +175,6 @@ config ARM64
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_CONTIGUOUS
select HAVE_DYNAMIC_FTRACE
select HAVE_DYNAMIC_FTRACE_WITH_REGS \
if $(cc-option,-fpatchable-function-entry=2)
select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
if DYNAMIC_FTRACE_WITH_REGS
select HAVE_EFFICIENT_UNALIGNED_ACCESS
@ -228,6 +226,17 @@ config ARM64
help
ARM 64-bit (AArch64) Linux support.
config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS
def_bool CC_IS_CLANG
# https://github.com/ClangBuiltLinux/linux/issues/1507
depends on AS_IS_GNU || (AS_IS_LLVM && (LD_IS_LLD || LD_VERSION >= 23600))
select HAVE_DYNAMIC_FTRACE_WITH_REGS
config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS
def_bool CC_IS_GCC
depends on $(cc-option,-fpatchable-function-entry=2)
select HAVE_DYNAMIC_FTRACE_WITH_REGS
config 64BIT
def_bool y
@ -678,7 +687,7 @@ config ARM64_ERRATUM_2051678
default y
help
This options adds the workaround for ARM Cortex-A510 erratum ARM64_ERRATUM_2051678.
Affected Coretex-A510 might not respect the ordering rules for
Affected Cortex-A510 might not respect the ordering rules for
hardware update of the page table's dirty bit. The workaround
is to not enable the feature on affected CPUs.

40
arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
View File

@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <761000>;
@ -71,26 +51,6 @@ cpub_opp_table_1: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;

40
arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
View File

@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
@ -76,26 +56,6 @@ cpub_opp_table_1: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <751000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <751000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <751000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <751000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <771000>;

8
arch/arm64/boot/dts/amlogic/meson-s4.dtsi
View File

@ -13,28 +13,28 @@ cpus {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x3>;
enable-method = "psci";
};

1
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
View File

@ -437,6 +437,7 @@ &gpio {
"",
"eMMC_RST#", /* BOOT_12 */
"eMMC_DS", /* BOOT_13 */
"", "",
/* GPIOC */
"SD_D0_B", /* GPIOC_0 */
"SD_D1_B", /* GPIOC_1 */

20
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
View File

@ -95,26 +95,6 @@ cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <730000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <730000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <730000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <666666666>;
opp-microvolt = <750000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <770000>;

8
arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
View File

@ -89,12 +89,12 @@ touchscreen@0 {
pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <125>;
touchscreen-size-x = /bits/ 16 <4008>;
touchscreen-size-x = <4008>;
ti,y-min = /bits/ 16 <282>;
touchscreen-size-y = /bits/ 16 <3864>;
touchscreen-size-y = <3864>;
ti,x-plate-ohms = /bits/ 16 <180>;
touchscreen-max-pressure = /bits/ 16 <255>;
touchscreen-average-samples = /bits/ 16 <10>;
touchscreen-max-pressure = <255>;
touchscreen-average-samples = <10>;
ti,debounce-tol = /bits/ 16 <3>;
ti,debounce-rep = /bits/ 16 <1>;
ti,settle-delay-usec = /bits/ 16 <150>;

4
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
View File

@ -146,12 +146,14 @@ &uart3 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
status = "okay";
};
@ -215,7 +217,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};

4
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
View File

@ -211,12 +211,14 @@ &uart4 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
@ -309,7 +311,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};

4
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
View File

@ -238,12 +238,14 @@ &uart4 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
@ -358,7 +360,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};

4
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
View File

@ -59,6 +59,10 @@ pmic@4b {
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clock-output-names = "clk-32k-out";
regulators {
buck1_reg: BUCK1 {
regulator-name = "buck1";

8
arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
View File

@ -70,12 +70,12 @@ touchscreen@0 {
pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
ti,x-min = /bits/ 16 <125>;
touchscreen-size-x = /bits/ 16 <4008>;
touchscreen-size-x = <4008>;
ti,y-min = /bits/ 16 <282>;
touchscreen-size-y = /bits/ 16 <3864>;
touchscreen-size-y = <3864>;
ti,x-plate-ohms = /bits/ 16 <180>;
touchscreen-max-pressure = /bits/ 16 <255>;
touchscreen-average-samples = /bits/ 16 <10>;
touchscreen-max-pressure = <255>;
touchscreen-average-samples = <10>;
ti,debounce-tol = /bits/ 16 <3>;
ti,debounce-rep = /bits/ 16 <1>;
ti,settle-delay-usec = /bits/ 16 <150>;

10
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View File

@ -293,7 +293,7 @@ spba2: spba-bus@30000000 {
ranges;
sai2: sai@30020000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
@ -307,7 +307,7 @@ sai2: sai@30020000 {
};
sai3: sai@30030000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30030000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
@ -321,7 +321,7 @@ sai3: sai@30030000 {
};
sai5: sai@30050000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
@ -337,7 +337,7 @@ sai5: sai@30050000 {
};
sai6: sai@30060000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
@ -394,7 +394,7 @@ spdif1: spdif@30090000 {
};
sai7: sai@300b0000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x300b0000 0x10000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI7_IPG>,

2
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
View File

@ -253,7 +253,7 @@ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <84000000>;
spi-tx-bus-width = <4>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};

2
arch/arm64/boot/dts/freescale/imx8qm.dtsi
View File

@ -196,7 +196,7 @@ pd: imx8qx-pd {
};
clk: clock-controller {
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
compatible = "fsl,imx8qm-clk", "fsl,scu-clk";
#clock-cells = <2>;
};

4
arch/arm64/boot/dts/qcom/msm8996.dtsi
View File

@ -1249,14 +1249,14 @@ blsp1_i2c3_default: blsp1-i2c2-default {
pins = "gpio47", "gpio48";
function = "blsp_i2c3";
drive-strength = <16>;
bias-disable = <0>;
bias-disable;
};
blsp1_i2c3_sleep: blsp1-i2c2-sleep {
pins = "gpio47", "gpio48";
function = "gpio";
drive-strength = <2>;
bias-disable = <0>;
bias-disable;
};
blsp2_uart3_4pins_default: blsp2-uart2-4pins {

2
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
View File

@ -33,7 +33,7 @@ trips {
};
&alc5682 {
realtek,dmic-clk-driving-high = "true";
realtek,dmic-clk-driving-high;
};
&cpu6_alert0 {

Some files were not shown because too many files have changed in this diff Show More