diff --git a/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml b/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml new file mode 100644 index 000000000000..8203ec5e5bb3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/ti/ti,am625-oldi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments AM625 OLDI Transmitter + +maintainers: + - Tomi Valkeinen + - Aradhya Bhatia + +description: + The AM625 TI Keystone OpenLDI transmitter (OLDI TX) supports serialized RGB + pixel data transmission between host and flat panel display over LVDS (Low + Voltage Differential Sampling) interface. The OLDI TX consists of 7-to-1 data + serializers, and 4-data and 1-clock LVDS outputs. It supports the LVDS output + formats "jeida-18", "jeida-24" and "vesa-18", and can accept 24-bit RGB or + padded and un-padded 18-bit RGB bus formats as input. + +properties: + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: serial clock input for the OLDI transmitters + + clock-names: + const: serial + + ti,companion-oldi: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to companion OLDI transmitter. This property is required for both + the OLDI TXes if they are expected to work either in dual-lvds mode or in + clone mode. This property should point to the other OLDI TX's phandle. + + ti,secondary-oldi: + type: boolean + description: + Boolean property to mark the OLDI transmitter as the secondary one, when the + OLDI hardware is expected to run as a companion HW, in cases of dual-lvds + mode or clone mode. The primary OLDI hardware is responsible for all the + hardware configuration. + + ti,oldi-io-ctrl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to syscon device node mapping OLDI IO_CTRL registers found in the + control MMR region. These registers are required to toggle the I/O lane + power, and control its electrical characteristics. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel RGB input port + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: LVDS output port + + required: + - port@0 + - port@1 + +required: + - reg + - clocks + - clock-names + - ti,oldi-io-ctrl + - ports + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index 9cebe237bd4e..361e9cae6896 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -100,6 +100,24 @@ properties: For AM62A7 DSS, the port is tied off inside the SoC. For AM62L DSS, the DSS DPI output port node from video port 1 or DSI Tx controller node connected to video port 1. + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: + For AM625 DSS, VP Connection to OLDI0. + For AM65X DSS, OLDI output from the SoC. + + endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint + description: + For AM625 DSS, VP Connection to OLDI1. + + anyOf: + - required: + - endpoint + - required: + - endpoint@0 + - endpoint@1 port@1: $ref: /schemas/graph.yaml#/properties/port @@ -121,6 +139,25 @@ properties: Input memory (from main memory to dispc) bandwidth limit in bytes per second + oldi-transmitters: + description: + Child node under the DSS, to describe all the OLDI transmitters connected + to the DSS videoports. + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + '^oldi@[0-1]$': + $ref: ti,am625-oldi.yaml# + description: OLDI transmitters connected to the DSS VPs + allOf: - if: properties: @@ -129,6 +166,7 @@ allOf: const: ti,am62a7-dss then: properties: + oldi-transmitters: false ports: properties: port@0: false @@ -143,6 +181,22 @@ allOf: properties: port@1: false + - if: + properties: + compatible: + contains: + enum: + - ti,am62l-dss + - ti,am65x-dss + then: + properties: + oldi-transmitters: false + ports: + properties: + port@0: + properties: + endpoint@1: false + required: - compatible - reg @@ -190,3 +244,106 @@ examples: }; }; }; + + - | + #include + #include + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + dss1: dss@30200000 { + compatible = "ti,am625-dss"; + reg = <0x00 0x30200000 0x00 0x1000>, /* common */ + <0x00 0x30202000 0x00 0x1000>, /* vidl1 */ + <0x00 0x30206000 0x00 0x1000>, /* vid */ + <0x00 0x30207000 0x00 0x1000>, /* ovr1 */ + <0x00 0x30208000 0x00 0x1000>, /* ovr2 */ + <0x00 0x3020a000 0x00 0x1000>, /* vp1 */ + <0x00 0x3020b000 0x00 0x1000>, /* vp2 */ + <0x00 0x30201000 0x00 0x1000>; /* common1 */ + reg-names = "common", "vidl1", "vid", + "ovr1", "ovr2", "vp1", "vp2", "common1"; + power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 186 6>, + <&vp1_clock>, + <&k3_clks 186 2>; + clock-names = "fck", "vp1", "vp2"; + interrupts = ; + oldi-transmitters { + #address-cells = <1>; + #size-cells = <0>; + oldi0: oldi@0 { + reg = <0>; + clocks = <&k3_clks 186 0>; + clock-names = "serial"; + ti,companion-oldi = <&oldi1>; + ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + oldi0_in: endpoint { + remote-endpoint = <&dpi0_out0>; + }; + }; + port@1 { + reg = <1>; + oldi0_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + }; + }; + oldi1: oldi@1 { + reg = <1>; + clocks = <&k3_clks 186 0>; + clock-names = "serial"; + ti,secondary-oldi; + ti,companion-oldi = <&oldi0>; + ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + oldi1_in: endpoint { + remote-endpoint = <&dpi0_out1>; + }; + }; + port@1 { + reg = <1>; + oldi1_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; + }; + }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dpi0_out0: endpoint@0 { + reg = <0>; + remote-endpoint = <&oldi0_in>; + }; + dpi0_out1: endpoint@1 { + reg = <1>; + remote-endpoint = <&oldi1_in>; + }; + }; + port@1 { + reg = <1>; + dpi1_out: endpoint { + remote-endpoint = <&hdmi_bridge>; + }; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 2abeec67acb1..ac6f0547cd32 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8230,6 +8230,7 @@ M: Tomi Valkeinen L: dri-devel@lists.freedesktop.org S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git +F: Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml F: Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml F: Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml F: Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml