From 8be19e233744961db6069da9c9ab63eb085a0447 Mon Sep 17 00:00:00 2001 From: Jonathan Santos Date: Mon, 23 Feb 2026 08:59:26 -0300 Subject: [PATCH] iio: adc: ad7768-1: fix one-shot mode data acquisition According to the datasheet, one-shot mode requires a SYNC_IN pulse to trigger a new sample conversion. In the current implementation, No sync pulse was sent after switching to one-shot mode and reinit_completion() was called before mode switching, creating a race condition where spurious interrupts during mode change could trigger completion prematurely. Fix by sending a sync pulse after configuring one-shot mode and reinit_completion() to ensure it only waits for the actual conversion completion. Fixes: a5f8c7da3dbe ("iio: adc: Add AD7768-1 ADC basic support") Signed-off-by: Jonathan Santos Reviewed-by: David Lechner Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7768-1.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c index fcd8aea7152e..4cb63ab4768a 100644 --- a/drivers/iio/adc/ad7768-1.c +++ b/drivers/iio/adc/ad7768-1.c @@ -463,12 +463,17 @@ static int ad7768_scan_direct(struct iio_dev *indio_dev) struct ad7768_state *st = iio_priv(indio_dev); int readval, ret; - reinit_completion(&st->completion); - ret = ad7768_set_mode(st, AD7768_ONE_SHOT); if (ret < 0) return ret; + reinit_completion(&st->completion); + + /* One-shot mode requires a SYNC pulse to generate a new sample */ + ret = ad7768_send_sync_pulse(st); + if (ret) + return ret; + ret = wait_for_completion_timeout(&st->completion, msecs_to_jiffies(1000)); if (!ret)