From 2f440c4f04ca28e3ddf4bb6f3d25f7613abe2873 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 16 Dec 2022 01:05:52 +0100 Subject: [PATCH 1/7] arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC The GPIO watchdog property name is 'always-running', not 'always-enabled'. Use the correct property name and reinstate it into the DT. Fixes: eff6b33c9ce9 ("arm64: dts: imx8mm: Remove watchdog always-enabled property from eDM SBC") Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts index 752f409a30b1..9889319d4f04 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts @@ -88,6 +88,7 @@ watchdog { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_watchdog_gpio>; compatible = "linux,wdt-gpio"; + always-running; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; hw_algo = "level"; /* Reset triggers in 2..3 seconds */ From fca053893e8d5be8173c92876c6329cbee78b880 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 2 Jan 2023 11:04:02 -0300 Subject: [PATCH 2/7] arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts' The following build warnings are seen when running: make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: cts-gpios: False schema does not allow [[33, 3, 1]] From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: rts-gpios: False schema does not allow [[33, 5, 1]] From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml ... The imx8m Venice Gateworks boards do not expose the UART RTS and CTS as native UART pins, so 'uart-has-rtscts' should not be used. Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination detected by serial.yaml. Fix the problem by removing the incorrect 'uart-has-rtscts' property. Fixes: 27c8f4ccc1b9 ("arm64: dts: imx8mm-venice-gw72xx-0x: add dt overlays for serial modes") Fixes: d9a9a7cf32c9 ("arm64: dts: imx8m{m,n}-venice-*: add missing uart-has-rtscts property to UARTs") Fixes: 870f645b396b ("arm64: dts: imx8mp-venice-gw74xx: add WiFi/BT module support") Signed-off-by: Fabio Estevam Acked-by: Tim Harvey Signed-off-by: Shawn Guo --- .../boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso | 1 - .../boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso | 1 - arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 3 --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 3 --- arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts | 1 - arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 1 - arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 1 - 8 files changed, 12 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso index 3ea73a6886ff..f6ad1a4b8b66 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso @@ -33,7 +33,6 @@ &uart2 { pinctrl-0 = <&pinctrl_uart2>; rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso index 2fa635e1c1a8..1f8ea20dfafc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso @@ -33,7 +33,6 @@ &uart2 { pinctrl-0 = <&pinctrl_uart2>; rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index 244ef8d6cc68..7761d5671cb1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -222,7 +222,6 @@ &uart3 { pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 6433c205f8dd..64b366e83fa1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -733,7 +733,6 @@ &uart1 { dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -749,7 +748,6 @@ &uart3 { pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -758,7 +756,6 @@ &uart4 { pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 32872b0b1aaf..e8bc1fccc47b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -664,7 +664,6 @@ &uart1 { pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; @@ -681,7 +680,6 @@ &uart3 { pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { @@ -699,7 +697,6 @@ &uart4 { dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index 8ce562246a08..acc2ba8e00a8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -581,7 +581,6 @@ &uart1 { dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index b9444e4a3d2d..7c12518dbc96 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -643,7 +643,6 @@ &uart3 { pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index ceeca4966fc5..8eb7d5ee38da 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -623,7 +623,6 @@ &uart3 { pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; - uart-has-rtscts; status = "okay"; bluetooth { From cfb47bf5a470bdd80e8ac2f7b2f3a34563ecd4ea Mon Sep 17 00:00:00 2001 From: Frank Li Date: Wed, 4 Jan 2023 16:07:40 -0500 Subject: [PATCH 3/7] arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode linux,keycode should be "linux,keycodes" according binding-doc Documentation/devicetree/bindings/input/fsl,scu-key.yaml Fixes: f537ee7f1e76 ("arm64: dts: freescale: add i.MX8DXL SoC support") Signed-off-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 0c64b9194621..214f21bd0cb4 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -164,7 +164,7 @@ rtc: rtc { sc_pwrkey: keys { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; - linux,keycode = ; + linux,keycodes = ; wakeup-source; }; From 47123900f3e4a7f769631d6ec15abf44086276f6 Mon Sep 17 00:00:00 2001 From: Pierluigi Passaro Date: Sun, 15 Jan 2023 22:35:03 +0100 Subject: [PATCH 4/7] arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According section     8.2.5.313 Select Input Register (IOMUXC_UART1_RXD_SELECT_INPUT) of      i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020 the required setting for this specific pin configuration is "1" Signed-off-by: Pierluigi Passaro Reviewed-by: Fabio Estevam Fixes: c1c9d41319c3 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm") Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h index 83c8f715cd90..b1f11098d248 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h @@ -602,7 +602,7 @@ #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24 0x234 0x49C 0x000 0x7 0x0 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 -#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x0 +#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x1 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25 0x238 0x4A0 0x000 0x7 0x0 From 52219e719f53c792cc10296178e7e38e9e1412aa Mon Sep 17 00:00:00 2001 From: Ahmad Fatoum Date: Mon, 16 Jan 2023 12:25:06 +0100 Subject: [PATCH 5/7] MAINTAINERS: match freescale ARM64 DT directory in i.MX entry The majority of device trees in arch/arm64/boot/dts/freescale/ are built around i.MX SoCs with the rest being for Layerscape. Yet, calling get_maintainers.pl -f on this directory will not match the MAINTAINERS entry, because the directory name doesn't contain the substring "imx". Add an explicit file match for the directory and exclude the Layerscape specific files. This ensures To/Cc is not only generated from git history, but takes e.g. the R: entries into account as well. Signed-off-by: Ahmad Fatoum Signed-off-by: Shawn Guo --- MAINTAINERS | 3 +++ 1 file changed, 3 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f61eb221415b..5dce1c45f4d1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2213,6 +2213,9 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git X: drivers/media/i2c/ +F: arch/arm64/boot/dts/freescale/ +X: arch/arm64/boot/dts/freescale/fsl-* +X: arch/arm64/boot/dts/freescale/qoriq-* N: imx N: mxs From 39c95d0c357d7ef76aea958c1bece6b24f9b2e7e Mon Sep 17 00:00:00 2001 From: Philippe Schenker Date: Mon, 16 Jan 2023 15:01:52 +0100 Subject: [PATCH 6/7] arm64: dts: imx8mm-verdin: Do not power down eth-phy Currently if suspending using either freeze or memory state, the fec driver tries to power down the phy which leads to crash of the kernel and non-responsible kernel with the following call trace: [ 24.839889 ] Call trace: [ 24.839892 ] phy_error+0x18/0x60 [ 24.839898 ] kszphy_handle_interrupt+0x6c/0x80 [ 24.839903 ] phy_interrupt+0x20/0x2c [ 24.839909 ] irq_thread_fn+0x30/0xa0 [ 24.839919 ] irq_thread+0x178/0x2c0 [ 24.839925 ] kthread+0x154/0x160 [ 24.839932 ] ret_from_fork+0x10/0x20 Since there is currently no functionality in the phy subsystem to power down phys let's just disable the feature of powering-down the ethernet phy. Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini") Signed-off-by: Philippe Schenker Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 0d454e0e2f7c..702d87621bb4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -98,6 +98,7 @@ reg_ethphy: regulator-ethphy { off-on-delay = <500000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_eth>; + regulator-always-on; regulator-boot-on; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; From 1febf88ef907b142fdde34f7c64ed3535d9339e4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 17 Jan 2023 08:25:10 -0300 Subject: [PATCH 7/7] ARM: dts: imx7d-smegw01: Fix USB host over-current polarity Currently, when resetting the USB modem via AT commands, the modem is no longer re-connected. This problem is caused by the incorrect description of the USB_OTG2_OC pad. It should have pull-up enabled, hysteresis enabled and the property 'over-current-active-low' should be passed. With this change, the USB modem can be successfully re-connected after a reset. Cc: stable@vger.kernel.org Fixes: 9ac0ae97e349 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board") Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-smegw01.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts index 546268b8d0b1..c0f00f5db11e 100644 --- a/arch/arm/boot/dts/imx7d-smegw01.dts +++ b/arch/arm/boot/dts/imx7d-smegw01.dts @@ -198,6 +198,7 @@ &usbotg1 { &usbotg2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg2>; + over-current-active-low; dr_mode = "host"; status = "okay"; }; @@ -374,7 +375,7 @@ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04 pinctrl_usbotg2: usbotg2grp { fsl,pins = < - MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04 + MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x5c >; };