From 882de800bf583dd15969836088789edbf035a944 Mon Sep 17 00:00:00 2001 From: Lucas Tanure Date: Sun, 23 Aug 2026 12:53:34 +0100 Subject: [PATCH] arm64: dts: amlogic: t7: use the real UART pclk uart_a listed the 24MHz crystal for all three of its clocks because the T7 clock controller driver did not exist when these boards were added. That leaves the real UART bus clock without a user, so the kernel turns it off when it disables unused clocks at the end of boot, and the board hangs. Update the board DTS files to point uart_a's pclk to CLKID_SYS_UART_A instead of the dummy crystal clock. Fixes: 4fef056588f5 ("arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree") Fixes: 6f048cc7a635 ("arm64: dts: add board AN400") Signed-off-by: Lucas Tanure Assisted-by: Claude:claude-fable-5 Reviewed-by: Neil Armstrong Link: https://patch.msgid.link/20260823115335.102219-2-tanure@linux.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts | 2 +- arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts index cab2ee9ea0d3..ca7536f772ff 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts @@ -33,7 +33,7 @@ xtal: xtal-clk { }; &uart_a { - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_A>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts index c41525a34b72..75d81ad6830d 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts @@ -266,6 +266,6 @@ &sd_emmc_c { &uart_a { status = "okay"; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_A>, <&xtal>; clock-names = "xtal", "pclk", "baud"; };