From 447794e44744aff3c0f11942b83b878b8bb6f72b Mon Sep 17 00:00:00 2001
From: Gonzalo Silvalde Blanco <gonzalo.silvalde@gmail.com>
Date: Fri, 4 Oct 2024 17:24:29 +0200
Subject: [PATCH 1/5] fbdev: sstfb: Make CONFIG_FB_DEVICE optional

The sstfb driver currently depends on CONFIG_FB_DEVICE to create sysfs
entries and access info->dev. This patch wraps the relevant code blocks
with #ifdef CONFIG_FB_DEVICE, allowing the driver to be built and used
even if CONFIG_FB_DEVICE is not selected.

The sysfs setting only controls the VGA pass-through state and is not
required for the display to work correctly.
(See: http://vogonswiki.com/index.php/VGA_passthrough_cable
for more information.)

Added some fixes from Thomas Zimmermann.

Signed-off-by: Gonzalo Silvalde Blanco <gonzalo.silvalde@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
---
 drivers/video/fbdev/Kconfig | 1 -
 drivers/video/fbdev/sstfb.c | 9 +++++++--
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index ea36c6956bf3..44a8fdbab6df 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1236,7 +1236,6 @@ config FB_3DFX_I2C
 config FB_VOODOO1
 	tristate "3Dfx Voodoo Graphics (sst1) support"
 	depends on FB && PCI
-	depends on FB_DEVICE
 	select FB_IOMEM_HELPERS
 	help
 	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
diff --git a/drivers/video/fbdev/sstfb.c b/drivers/video/fbdev/sstfb.c
index f8ae54ca0cc3..2ea947f57efb 100644
--- a/drivers/video/fbdev/sstfb.c
+++ b/drivers/video/fbdev/sstfb.c
@@ -716,6 +716,7 @@ static void sstfb_setvgapass( struct fb_info *info, int enable )
 	pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
 }
 
+#ifdef CONFIG_FB_DEVICE
 static ssize_t store_vgapass(struct device *device, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
@@ -739,7 +740,8 @@ static ssize_t show_vgapass(struct device *device, struct device_attribute *attr
 
 static struct device_attribute device_attrs[] = {
 	__ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass)
-	};
+};
+#endif
 
 static int sstfb_ioctl(struct fb_info *info, unsigned int cmd,
 			unsigned long arg)
@@ -1436,9 +1438,10 @@ static int sstfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	sstfb_clear_screen(info);
 
+#ifdef CONFIG_FB_DEVICE
 	if (device_create_file(info->dev, &device_attrs[0]))
 		printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
-
+#endif
 
 	fb_info(info, "%s frame buffer device at 0x%p\n",
 		fix->id, info->screen_base);
@@ -1468,7 +1471,9 @@ static void sstfb_remove(struct pci_dev *pdev)
 	info = pci_get_drvdata(pdev);
 	par = info->par;
 
+#ifdef CONFIG_FB_DEVICE
 	device_remove_file(info->dev, &device_attrs[0]);
+#endif
 	sst_shutdown(info);
 	iounmap(info->screen_base);
 	iounmap(par->mmio_vbase);

From 57e755d333d1465c1cbf31d28245d429e1015beb Mon Sep 17 00:00:00 2001
From: SurajSonawane2415 <surajsonawane0215@gmail.com>
Date: Sun, 6 Oct 2024 12:45:14 +0530
Subject: [PATCH 2/5] fbdev: nvidiafb: fix inconsistent indentation warning

Fix the indentation to ensure consistent code style and improve
readability, and to fix this warning:
drivers/video/fbdev/nvidia/nv_hw.c:1512 NVLoadStateExt() warn:
inconsistent indenting

Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
---
 drivers/video/fbdev/nvidia/nv_hw.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/video/fbdev/nvidia/nv_hw.c b/drivers/video/fbdev/nvidia/nv_hw.c
index 9b0a324bb1b4..75afaa07e7eb 100644
--- a/drivers/video/fbdev/nvidia/nv_hw.c
+++ b/drivers/video/fbdev/nvidia/nv_hw.c
@@ -1509,10 +1509,10 @@ void NVLoadStateExt(struct nvidia_par *par, RIVA_HW_STATE * state)
 	NV_WR32(par->PFIFO, 0x0495 * 4, 0x00000001);
 	NV_WR32(par->PFIFO, 0x0140 * 4, 0x00000001);
 
-    if (!state) {
-	    par->CurrentState = NULL;
-	    return;
-    }
+	if (!state) {
+		par->CurrentState = NULL;
+		return;
+	}
 
 	if (par->Architecture >= NV_ARCH_10) {
 		if (par->twoHeads) {

From 161e95b899a624b877c13a83e4cc720aa56514b4 Mon Sep 17 00:00:00 2001
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sun, 13 Oct 2024 13:48:01 +0200
Subject: [PATCH 3/5] fbdev: Constify struct sbus_mmap_map

'struct sbus_mmap_map' are not modified in these drivers.

Constifying this structure moves some data to a read-only section, so
increases overall security.

Update sbusfb_mmap_helper() accordingly.

On a x86_64, with allmodconfig, as an example:
Before:
======
   text	   data	    bss	    dec	    hex	filename
   2452	    536	     16	   3004	    bbc	drivers/video/fbdev/bw2.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
   2500	    483	     16	   2999	    bb7	drivers/video/fbdev/bw2.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
---
 drivers/video/fbdev/bw2.c     | 2 +-
 drivers/video/fbdev/cg14.c    | 2 +-
 drivers/video/fbdev/cg3.c     | 2 +-
 drivers/video/fbdev/cg6.c     | 2 +-
 drivers/video/fbdev/ffb.c     | 2 +-
 drivers/video/fbdev/leo.c     | 2 +-
 drivers/video/fbdev/p9100.c   | 2 +-
 drivers/video/fbdev/sbuslib.c | 2 +-
 drivers/video/fbdev/sbuslib.h | 2 +-
 drivers/video/fbdev/tcx.c     | 2 +-
 10 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/video/fbdev/bw2.c b/drivers/video/fbdev/bw2.c
index 4a64940e0c00..e757462af0a6 100644
--- a/drivers/video/fbdev/bw2.c
+++ b/drivers/video/fbdev/bw2.c
@@ -147,7 +147,7 @@ bw2_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
-static struct sbus_mmap_map bw2_mmap_map[] = {
+static const struct sbus_mmap_map bw2_mmap_map[] = {
 	{
 		.size = SBUS_MMAP_FBSIZE(1)
 	},
diff --git a/drivers/video/fbdev/cg14.c b/drivers/video/fbdev/cg14.c
index 430e1a7b352b..5389f8f07346 100644
--- a/drivers/video/fbdev/cg14.c
+++ b/drivers/video/fbdev/cg14.c
@@ -360,7 +360,7 @@ static void cg14_init_fix(struct fb_info *info, int linebytes,
 	info->fix.accel = FB_ACCEL_SUN_CG14;
 }
 
-static struct sbus_mmap_map __cg14_mmap_map[CG14_MMAP_ENTRIES] = {
+static const struct sbus_mmap_map __cg14_mmap_map[CG14_MMAP_ENTRIES] = {
 	{
 		.voff	= CG14_REGS,
 		.poff	= 0x80000000,
diff --git a/drivers/video/fbdev/cg3.c b/drivers/video/fbdev/cg3.c
index e4c53c6632ba..a58a483014e6 100644
--- a/drivers/video/fbdev/cg3.c
+++ b/drivers/video/fbdev/cg3.c
@@ -209,7 +209,7 @@ static int cg3_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
-static struct sbus_mmap_map cg3_mmap_map[] = {
+static const struct sbus_mmap_map cg3_mmap_map[] = {
 	{
 		.voff	= CG3_MMAP_OFFSET,
 		.poff	= CG3_RAM_OFFSET,
diff --git a/drivers/video/fbdev/cg6.c b/drivers/video/fbdev/cg6.c
index 0b60df51e7bc..56d74468040a 100644
--- a/drivers/video/fbdev/cg6.c
+++ b/drivers/video/fbdev/cg6.c
@@ -545,7 +545,7 @@ static int cg6_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
-static struct sbus_mmap_map cg6_mmap_map[] = {
+static const struct sbus_mmap_map cg6_mmap_map[] = {
 	{
 		.voff	= CG6_FBC,
 		.poff	= CG6_FBC_OFFSET,
diff --git a/drivers/video/fbdev/ffb.c b/drivers/video/fbdev/ffb.c
index 0b7e7b38c05a..34b6abff9493 100644
--- a/drivers/video/fbdev/ffb.c
+++ b/drivers/video/fbdev/ffb.c
@@ -710,7 +710,7 @@ static int ffb_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
-static struct sbus_mmap_map ffb_mmap_map[] = {
+static const struct sbus_mmap_map ffb_mmap_map[] = {
 	{
 		.voff	= FFB_SFB8R_VOFF,
 		.poff	= FFB_SFB8R_POFF,
diff --git a/drivers/video/fbdev/leo.c b/drivers/video/fbdev/leo.c
index 271e2e8c6a84..b9fb059df2c7 100644
--- a/drivers/video/fbdev/leo.c
+++ b/drivers/video/fbdev/leo.c
@@ -338,7 +338,7 @@ static int leo_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
-static struct sbus_mmap_map leo_mmap_map[] = {
+static const struct sbus_mmap_map leo_mmap_map[] = {
 	{
 		.voff	= LEO_SS0_MAP,
 		.poff	= LEO_OFF_SS0,
diff --git a/drivers/video/fbdev/p9100.c b/drivers/video/fbdev/p9100.c
index 124468f0e9ef..0bc0f78fe4b9 100644
--- a/drivers/video/fbdev/p9100.c
+++ b/drivers/video/fbdev/p9100.c
@@ -206,7 +206,7 @@ p9100_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
-static struct sbus_mmap_map p9100_mmap_map[] = {
+static const struct sbus_mmap_map p9100_mmap_map[] = {
 	{ CG3_MMAP_OFFSET,	0,		SBUS_MMAP_FBSIZE(1) },
 	{ 0,			0,		0		    }
 };
diff --git a/drivers/video/fbdev/sbuslib.c b/drivers/video/fbdev/sbuslib.c
index 634e3d159452..4c79654bda30 100644
--- a/drivers/video/fbdev/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
@@ -38,7 +38,7 @@ static unsigned long sbusfb_mmapsize(long size, unsigned long fbsize)
 	return fbsize * (-size);
 }
 
-int sbusfb_mmap_helper(struct sbus_mmap_map *map,
+int sbusfb_mmap_helper(const struct sbus_mmap_map *map,
 		       unsigned long physbase,
 		       unsigned long fbsize,
 		       unsigned long iospace,
diff --git a/drivers/video/fbdev/sbuslib.h b/drivers/video/fbdev/sbuslib.h
index 6466b4cbcd7b..e9af2dc93f94 100644
--- a/drivers/video/fbdev/sbuslib.h
+++ b/drivers/video/fbdev/sbuslib.h
@@ -19,7 +19,7 @@ struct sbus_mmap_map {
 
 extern void sbusfb_fill_var(struct fb_var_screeninfo *var,
 			    struct device_node *dp, int bpp);
-extern int sbusfb_mmap_helper(struct sbus_mmap_map *map,
+extern int sbusfb_mmap_helper(const struct sbus_mmap_map *map,
 			      unsigned long physbase, unsigned long fbsize,
 			      unsigned long iospace,
 			      struct vm_area_struct *vma);
diff --git a/drivers/video/fbdev/tcx.c b/drivers/video/fbdev/tcx.c
index 6eb8bb2e3501..f9a0085ad72b 100644
--- a/drivers/video/fbdev/tcx.c
+++ b/drivers/video/fbdev/tcx.c
@@ -236,7 +236,7 @@ tcx_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
-static struct sbus_mmap_map __tcx_mmap_map[TCX_MMAP_ENTRIES] = {
+static const struct sbus_mmap_map __tcx_mmap_map[TCX_MMAP_ENTRIES] = {
 	{
 		.voff	= TCX_RAM8BIT,
 		.size	= SBUS_MMAP_FBSIZE(1)

From bb94f56b9cfa4a946a43492b2a13ecb5b9b571bc Mon Sep 17 00:00:00 2001
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Date: Tue, 15 Oct 2024 08:53:29 +0200
Subject: [PATCH 4/5] fbdev: da8xx: remove the driver

This driver is no longer used on any platform. It has been replaced by
tilcdc on the two DaVinci boards we still support and can be removed.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
---
 drivers/video/fbdev/Kconfig    |   13 -
 drivers/video/fbdev/Makefile   |    1 -
 drivers/video/fbdev/da8xx-fb.c | 1665 --------------------------------
 include/video/da8xx-fb.h       |   94 --
 4 files changed, 1773 deletions(-)
 delete mode 100644 drivers/video/fbdev/da8xx-fb.c
 delete mode 100644 include/video/da8xx-fb.h

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 44a8fdbab6df..77b50579bd09 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1659,19 +1659,6 @@ config FB_SH7760
 	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
 	  panels <= 320 pixel horizontal resolution.
 
-config FB_DA8XX
-	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
-	depends on FB && HAVE_CLK && HAS_IOMEM
-	depends on ARCH_DAVINCI_DA8XX || SOC_AM33XX || COMPILE_TEST
-	select FB_CFB_REV_PIXELS_IN_BYTE
-	select FB_IOMEM_HELPERS
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This is the frame buffer device driver for the TI LCD controller
-	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
-	  If unsure, say N.
-
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 3eecd51267fa..b3d12f977c06 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -121,7 +121,6 @@ obj-$(CONFIG_FB_VESA)             += vesafb.o
 obj-$(CONFIG_FB_EFI)              += efifb.o
 obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
-obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
 obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
 
diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
deleted file mode 100644
index fad1e13c6332..000000000000
--- a/drivers/video/fbdev/da8xx-fb.c
+++ /dev/null
@@ -1,1665 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2008-2009 MontaVista Software Inc.
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * Based on the LCD driver for TI Avalanche processors written by
- * Ajay Singh and Shalom Hai.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/fb.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/uaccess.h>
-#include <linux/pm_runtime.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/console.h>
-#include <linux/regulator/consumer.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/lcm.h>
-#include <video/da8xx-fb.h>
-#include <asm/div64.h>
-
-#define DRIVER_NAME "da8xx_lcdc"
-
-#define LCD_VERSION_1	1
-#define LCD_VERSION_2	2
-
-/* LCD Status Register */
-#define LCD_END_OF_FRAME1		BIT(9)
-#define LCD_END_OF_FRAME0		BIT(8)
-#define LCD_PL_LOAD_DONE		BIT(6)
-#define LCD_FIFO_UNDERFLOW		BIT(5)
-#define LCD_SYNC_LOST			BIT(2)
-#define LCD_FRAME_DONE			BIT(0)
-
-/* LCD DMA Control Register */
-#define LCD_DMA_BURST_SIZE(x)		((x) << 4)
-#define LCD_DMA_BURST_1			0x0
-#define LCD_DMA_BURST_2			0x1
-#define LCD_DMA_BURST_4			0x2
-#define LCD_DMA_BURST_8			0x3
-#define LCD_DMA_BURST_16		0x4
-#define LCD_V1_END_OF_FRAME_INT_ENA	BIT(2)
-#define LCD_V2_END_OF_FRAME0_INT_ENA	BIT(8)
-#define LCD_V2_END_OF_FRAME1_INT_ENA	BIT(9)
-#define LCD_DUAL_FRAME_BUFFER_ENABLE	BIT(0)
-
-/* LCD Control Register */
-#define LCD_CLK_DIVISOR(x)		((x) << 8)
-#define LCD_RASTER_MODE			0x01
-
-/* LCD Raster Control Register */
-#define LCD_PALETTE_LOAD_MODE(x)	((x) << 20)
-#define PALETTE_AND_DATA		0x00
-#define PALETTE_ONLY			0x01
-#define DATA_ONLY			0x02
-
-#define LCD_MONO_8BIT_MODE		BIT(9)
-#define LCD_RASTER_ORDER		BIT(8)
-#define LCD_TFT_MODE			BIT(7)
-#define LCD_V1_UNDERFLOW_INT_ENA	BIT(6)
-#define LCD_V2_UNDERFLOW_INT_ENA	BIT(5)
-#define LCD_V1_PL_INT_ENA		BIT(4)
-#define LCD_V2_PL_INT_ENA		BIT(6)
-#define LCD_MONOCHROME_MODE		BIT(1)
-#define LCD_RASTER_ENABLE		BIT(0)
-#define LCD_TFT_ALT_ENABLE		BIT(23)
-#define LCD_STN_565_ENABLE		BIT(24)
-#define LCD_V2_DMA_CLK_EN		BIT(2)
-#define LCD_V2_LIDD_CLK_EN		BIT(1)
-#define LCD_V2_CORE_CLK_EN		BIT(0)
-#define LCD_V2_LPP_B10			26
-#define LCD_V2_TFT_24BPP_MODE		BIT(25)
-#define LCD_V2_TFT_24BPP_UNPACK		BIT(26)
-
-/* LCD Raster Timing 2 Register */
-#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x)	((x) << 16)
-#define LCD_AC_BIAS_FREQUENCY(x)		((x) << 8)
-#define LCD_SYNC_CTRL				BIT(25)
-#define LCD_SYNC_EDGE				BIT(24)
-#define LCD_INVERT_PIXEL_CLOCK			BIT(22)
-#define LCD_INVERT_LINE_CLOCK			BIT(21)
-#define LCD_INVERT_FRAME_CLOCK			BIT(20)
-
-/* LCD Block */
-#define  LCD_PID_REG				0x0
-#define  LCD_CTRL_REG				0x4
-#define  LCD_STAT_REG				0x8
-#define  LCD_RASTER_CTRL_REG			0x28
-#define  LCD_RASTER_TIMING_0_REG		0x2C
-#define  LCD_RASTER_TIMING_1_REG		0x30
-#define  LCD_RASTER_TIMING_2_REG		0x34
-#define  LCD_DMA_CTRL_REG			0x40
-#define  LCD_DMA_FRM_BUF_BASE_ADDR_0_REG	0x44
-#define  LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG	0x48
-#define  LCD_DMA_FRM_BUF_BASE_ADDR_1_REG	0x4C
-#define  LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG	0x50
-
-/* Interrupt Registers available only in Version 2 */
-#define  LCD_RAW_STAT_REG			0x58
-#define  LCD_MASKED_STAT_REG			0x5c
-#define  LCD_INT_ENABLE_SET_REG			0x60
-#define  LCD_INT_ENABLE_CLR_REG			0x64
-#define  LCD_END_OF_INT_IND_REG			0x68
-
-/* Clock registers available only on Version 2 */
-#define  LCD_CLK_ENABLE_REG			0x6c
-#define  LCD_CLK_RESET_REG			0x70
-#define  LCD_CLK_MAIN_RESET			BIT(3)
-
-#define LCD_NUM_BUFFERS	2
-
-#define PALETTE_SIZE	256
-
-#define	CLK_MIN_DIV	2
-#define	CLK_MAX_DIV	255
-
-static void __iomem *da8xx_fb_reg_base;
-static unsigned int lcd_revision;
-static irq_handler_t lcdc_irq_handler;
-static wait_queue_head_t frame_done_wq;
-static int frame_done_flag;
-
-static unsigned int lcdc_read(unsigned int addr)
-{
-	return (unsigned int)__raw_readl(da8xx_fb_reg_base + (addr));
-}
-
-static void lcdc_write(unsigned int val, unsigned int addr)
-{
-	__raw_writel(val, da8xx_fb_reg_base + (addr));
-}
-
-struct da8xx_fb_par {
-	struct device		*dev;
-	dma_addr_t		p_palette_base;
-	unsigned char *v_palette_base;
-	dma_addr_t		vram_phys;
-	unsigned long		vram_size;
-	void			*vram_virt;
-	unsigned int		dma_start;
-	unsigned int		dma_end;
-	struct clk *lcdc_clk;
-	int irq;
-	unsigned int palette_sz;
-	int blank;
-	wait_queue_head_t	vsync_wait;
-	int			vsync_flag;
-	int			vsync_timeout;
-	spinlock_t		lock_for_chan_update;
-
-	/*
-	 * LCDC has 2 ping pong DMA channels, channel 0
-	 * and channel 1.
-	 */
-	unsigned int		which_dma_channel_done;
-#ifdef CONFIG_CPU_FREQ
-	struct notifier_block	freq_transition;
-#endif
-	unsigned int		lcdc_clk_rate;
-	struct regulator	*lcd_supply;
-	u32 pseudo_palette[16];
-	struct fb_videomode	mode;
-	struct lcd_ctrl_config	cfg;
-};
-
-static struct fb_var_screeninfo da8xx_fb_var;
-
-static struct fb_fix_screeninfo da8xx_fb_fix = {
-	.id = "DA8xx FB Drv",
-	.type = FB_TYPE_PACKED_PIXELS,
-	.type_aux = 0,
-	.visual = FB_VISUAL_PSEUDOCOLOR,
-	.xpanstep = 0,
-	.ypanstep = 1,
-	.ywrapstep = 0,
-	.accel = FB_ACCEL_NONE
-};
-
-static struct fb_videomode known_lcd_panels[] = {
-	/* Sharp LCD035Q3DG01 */
-	[0] = {
-		.name           = "Sharp_LCD035Q3DG01",
-		.xres           = 320,
-		.yres           = 240,
-		.pixclock       = KHZ2PICOS(4607),
-		.left_margin    = 6,
-		.right_margin   = 8,
-		.upper_margin   = 2,
-		.lower_margin   = 2,
-		.hsync_len      = 0,
-		.vsync_len      = 0,
-		.sync           = FB_SYNC_CLK_INVERT,
-	},
-	/* Sharp LK043T1DG01 */
-	[1] = {
-		.name           = "Sharp_LK043T1DG01",
-		.xres           = 480,
-		.yres           = 272,
-		.pixclock       = KHZ2PICOS(7833),
-		.left_margin    = 2,
-		.right_margin   = 2,
-		.upper_margin   = 2,
-		.lower_margin   = 2,
-		.hsync_len      = 41,
-		.vsync_len      = 10,
-		.sync           = 0,
-		.flag           = 0,
-	},
-	[2] = {
-		/* Hitachi SP10Q010 */
-		.name           = "SP10Q010",
-		.xres           = 320,
-		.yres           = 240,
-		.pixclock       = KHZ2PICOS(7833),
-		.left_margin    = 10,
-		.right_margin   = 10,
-		.upper_margin   = 10,
-		.lower_margin   = 10,
-		.hsync_len      = 10,
-		.vsync_len      = 10,
-		.sync           = 0,
-		.flag           = 0,
-	},
-	[3] = {
-		/* Densitron 84-0023-001T */
-		.name           = "Densitron_84-0023-001T",
-		.xres           = 320,
-		.yres           = 240,
-		.pixclock       = KHZ2PICOS(6400),
-		.left_margin    = 0,
-		.right_margin   = 0,
-		.upper_margin   = 0,
-		.lower_margin   = 0,
-		.hsync_len      = 30,
-		.vsync_len      = 3,
-		.sync           = 0,
-	},
-};
-
-static bool da8xx_fb_is_raster_enabled(void)
-{
-	return !!(lcdc_read(LCD_RASTER_CTRL_REG) & LCD_RASTER_ENABLE);
-}
-
-/* Enable the Raster Engine of the LCD Controller */
-static void lcd_enable_raster(void)
-{
-	u32 reg;
-
-	/* Put LCDC in reset for several cycles */
-	if (lcd_revision == LCD_VERSION_2)
-		/* Write 1 to reset LCDC */
-		lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
-	mdelay(1);
-
-	/* Bring LCDC out of reset */
-	if (lcd_revision == LCD_VERSION_2)
-		lcdc_write(0, LCD_CLK_RESET_REG);
-	mdelay(1);
-
-	/* Above reset sequence doesnot reset register context */
-	reg = lcdc_read(LCD_RASTER_CTRL_REG);
-	if (!(reg & LCD_RASTER_ENABLE))
-		lcdc_write(reg | LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
-}
-
-/* Disable the Raster Engine of the LCD Controller */
-static void lcd_disable_raster(enum da8xx_frame_complete wait_for_frame_done)
-{
-	u32 reg;
-	int ret;
-
-	reg = lcdc_read(LCD_RASTER_CTRL_REG);
-	if (reg & LCD_RASTER_ENABLE)
-		lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
-	else
-		/* return if already disabled */
-		return;
-
-	if ((wait_for_frame_done == DA8XX_FRAME_WAIT) &&
-			(lcd_revision == LCD_VERSION_2)) {
-		frame_done_flag = 0;
-		ret = wait_event_interruptible_timeout(frame_done_wq,
-				frame_done_flag != 0,
-				msecs_to_jiffies(50));
-		if (ret == 0)
-			pr_err("LCD Controller timed out\n");
-	}
-}
-
-static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
-{
-	u32 start;
-	u32 end;
-	u32 reg_ras;
-	u32 reg_dma;
-	u32 reg_int;
-
-	/* init reg to clear PLM (loading mode) fields */
-	reg_ras = lcdc_read(LCD_RASTER_CTRL_REG);
-	reg_ras &= ~(3 << 20);
-
-	reg_dma  = lcdc_read(LCD_DMA_CTRL_REG);
-
-	if (load_mode == LOAD_DATA) {
-		start    = par->dma_start;
-		end      = par->dma_end;
-
-		reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
-		if (lcd_revision == LCD_VERSION_1) {
-			reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA;
-		} else {
-			reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
-				LCD_V2_END_OF_FRAME0_INT_ENA |
-				LCD_V2_END_OF_FRAME1_INT_ENA |
-				LCD_FRAME_DONE | LCD_SYNC_LOST;
-			lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
-		}
-		reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
-
-		lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-		lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
-		lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
-		lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
-	} else if (load_mode == LOAD_PALETTE) {
-		start    = par->p_palette_base;
-		end      = start + par->palette_sz - 1;
-
-		reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
-
-		if (lcd_revision == LCD_VERSION_1) {
-			reg_ras |= LCD_V1_PL_INT_ENA;
-		} else {
-			reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
-				LCD_V2_PL_INT_ENA;
-			lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
-		}
-
-		lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-		lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
-	}
-
-	lcdc_write(reg_dma, LCD_DMA_CTRL_REG);
-	lcdc_write(reg_ras, LCD_RASTER_CTRL_REG);
-
-	/*
-	 * The Raster enable bit must be set after all other control fields are
-	 * set.
-	 */
-	lcd_enable_raster();
-}
-
-/* Configure the Burst Size and fifo threhold of DMA */
-static int lcd_cfg_dma(int burst_size, int fifo_th)
-{
-	u32 reg;
-
-	reg = lcdc_read(LCD_DMA_CTRL_REG) & 0x00000001;
-	switch (burst_size) {
-	case 1:
-		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1);
-		break;
-	case 2:
-		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2);
-		break;
-	case 4:
-		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4);
-		break;
-	case 8:
-		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
-		break;
-	case 16:
-	default:
-		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
-		break;
-	}
-
-	reg |= (fifo_th << 8);
-
-	lcdc_write(reg, LCD_DMA_CTRL_REG);
-
-	return 0;
-}
-
-static void lcd_cfg_ac_bias(int period, int transitions_per_int)
-{
-	u32 reg;
-
-	/* Set the AC Bias Period and Number of Transisitons per Interrupt */
-	reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & 0xFFF00000;
-	reg |= LCD_AC_BIAS_FREQUENCY(period) |
-		LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);
-	lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
-}
-
-static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width,
-		int front_porch)
-{
-	u32 reg;
-
-	reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0x3ff;
-	reg |= (((back_porch-1) & 0xff) << 24)
-	    | (((front_porch-1) & 0xff) << 16)
-	    | (((pulse_width-1) & 0x3f) << 10);
-	lcdc_write(reg, LCD_RASTER_TIMING_0_REG);
-
-	/*
-	 * LCDC Version 2 adds some extra bits that increase the allowable
-	 * size of the horizontal timing registers.
-	 * remember that the registers use 0 to represent 1 so all values
-	 * that get set into register need to be decremented by 1
-	 */
-	if (lcd_revision == LCD_VERSION_2) {
-		/* Mask off the bits we want to change */
-		reg = lcdc_read(LCD_RASTER_TIMING_2_REG) & ~0x780000ff;
-		reg |= ((front_porch-1) & 0x300) >> 8;
-		reg |= ((back_porch-1) & 0x300) >> 4;
-		reg |= ((pulse_width-1) & 0x3c0) << 21;
-		lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
-	}
-}
-
-static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
-		int front_porch)
-{
-	u32 reg;
-
-	reg = lcdc_read(LCD_RASTER_TIMING_1_REG) & 0x3ff;
-	reg |= ((back_porch & 0xff) << 24)
-	    | ((front_porch & 0xff) << 16)
-	    | (((pulse_width-1) & 0x3f) << 10);
-	lcdc_write(reg, LCD_RASTER_TIMING_1_REG);
-}
-
-static int lcd_cfg_display(const struct lcd_ctrl_config *cfg,
-		struct fb_videomode *panel)
-{
-	u32 reg;
-	u32 reg_int;
-
-	reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(LCD_TFT_MODE |
-						LCD_MONO_8BIT_MODE |
-						LCD_MONOCHROME_MODE);
-
-	switch (cfg->panel_shade) {
-	case MONOCHROME:
-		reg |= LCD_MONOCHROME_MODE;
-		if (cfg->mono_8bit_mode)
-			reg |= LCD_MONO_8BIT_MODE;
-		break;
-	case COLOR_ACTIVE:
-		reg |= LCD_TFT_MODE;
-		if (cfg->tft_alt_mode)
-			reg |= LCD_TFT_ALT_ENABLE;
-		break;
-
-	case COLOR_PASSIVE:
-		/* AC bias applicable only for Pasive panels */
-		lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
-		if (cfg->bpp == 12 && cfg->stn_565_mode)
-			reg |= LCD_STN_565_ENABLE;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	/* enable additional interrupts here */
-	if (lcd_revision == LCD_VERSION_1) {
-		reg |= LCD_V1_UNDERFLOW_INT_ENA;
-	} else {
-		reg_int = lcdc_read(LCD_INT_ENABLE_SET_REG) |
-			LCD_V2_UNDERFLOW_INT_ENA;
-		lcdc_write(reg_int, LCD_INT_ENABLE_SET_REG);
-	}
-
-	lcdc_write(reg, LCD_RASTER_CTRL_REG);
-
-	reg = lcdc_read(LCD_RASTER_TIMING_2_REG);
-
-	reg |= LCD_SYNC_CTRL;
-
-	if (cfg->sync_edge)
-		reg |= LCD_SYNC_EDGE;
-	else
-		reg &= ~LCD_SYNC_EDGE;
-
-	if ((panel->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
-		reg |= LCD_INVERT_LINE_CLOCK;
-	else
-		reg &= ~LCD_INVERT_LINE_CLOCK;
-
-	if ((panel->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
-		reg |= LCD_INVERT_FRAME_CLOCK;
-	else
-		reg &= ~LCD_INVERT_FRAME_CLOCK;
-
-	lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
-
-	return 0;
-}
-
-static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
-		u32 bpp, u32 raster_order)
-{
-	u32 reg;
-
-	if (bpp > 16 && lcd_revision == LCD_VERSION_1)
-		return -EINVAL;
-
-	/* Set the Panel Width */
-	/* Pixels per line = (PPL + 1)*16 */
-	if (lcd_revision == LCD_VERSION_1) {
-		/*
-		 * 0x3F in bits 4..9 gives max horizontal resolution = 1024
-		 * pixels.
-		 */
-		width &= 0x3f0;
-	} else {
-		/*
-		 * 0x7F in bits 4..10 gives max horizontal resolution = 2048
-		 * pixels.
-		 */
-		width &= 0x7f0;
-	}
-
-	reg = lcdc_read(LCD_RASTER_TIMING_0_REG);
-	reg &= 0xfffffc00;
-	if (lcd_revision == LCD_VERSION_1) {
-		reg |= ((width >> 4) - 1) << 4;
-	} else {
-		width = (width >> 4) - 1;
-		reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3);
-	}
-	lcdc_write(reg, LCD_RASTER_TIMING_0_REG);
-
-	/* Set the Panel Height */
-	/* Set bits 9:0 of Lines Per Pixel */
-	reg = lcdc_read(LCD_RASTER_TIMING_1_REG);
-	reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
-	lcdc_write(reg, LCD_RASTER_TIMING_1_REG);
-
-	/* Set bit 10 of Lines Per Pixel */
-	if (lcd_revision == LCD_VERSION_2) {
-		reg = lcdc_read(LCD_RASTER_TIMING_2_REG);
-		reg |= ((height - 1) & 0x400) << 16;
-		lcdc_write(reg, LCD_RASTER_TIMING_2_REG);
-	}
-
-	/* Set the Raster Order of the Frame Buffer */
-	reg = lcdc_read(LCD_RASTER_CTRL_REG) & ~(1 << 8);
-	if (raster_order)
-		reg |= LCD_RASTER_ORDER;
-
-	par->palette_sz = 16 * 2;
-
-	switch (bpp) {
-	case 1:
-	case 2:
-	case 4:
-	case 16:
-		break;
-	case 24:
-		reg |= LCD_V2_TFT_24BPP_MODE;
-		break;
-	case 32:
-		reg |= LCD_V2_TFT_24BPP_MODE;
-		reg |= LCD_V2_TFT_24BPP_UNPACK;
-		break;
-	case 8:
-		par->palette_sz = 256 * 2;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	lcdc_write(reg, LCD_RASTER_CTRL_REG);
-
-	return 0;
-}
-
-#define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16)
-static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
-			      unsigned blue, unsigned transp,
-			      struct fb_info *info)
-{
-	struct da8xx_fb_par *par = info->par;
-	unsigned short *palette = (unsigned short *) par->v_palette_base;
-	u_short pal;
-	int update_hw = 0;
-
-	if (regno > 255)
-		return 1;
-
-	if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
-		return 1;
-
-	if (info->var.bits_per_pixel > 16 && lcd_revision == LCD_VERSION_1)
-		return -EINVAL;
-
-	switch (info->fix.visual) {
-	case FB_VISUAL_TRUECOLOR:
-		red = CNVT_TOHW(red, info->var.red.length);
-		green = CNVT_TOHW(green, info->var.green.length);
-		blue = CNVT_TOHW(blue, info->var.blue.length);
-		break;
-	case FB_VISUAL_PSEUDOCOLOR:
-		switch (info->var.bits_per_pixel) {
-		case 4:
-			if (regno > 15)
-				return -EINVAL;
-
-			if (info->var.grayscale) {
-				pal = regno;
-			} else {
-				red >>= 4;
-				green >>= 8;
-				blue >>= 12;
-
-				pal = red & 0x0f00;
-				pal |= green & 0x00f0;
-				pal |= blue & 0x000f;
-			}
-			if (regno == 0)
-				pal |= 0x2000;
-			palette[regno] = pal;
-			break;
-
-		case 8:
-			red >>= 4;
-			green >>= 8;
-			blue >>= 12;
-
-			pal = (red & 0x0f00);
-			pal |= (green & 0x00f0);
-			pal |= (blue & 0x000f);
-
-			if (palette[regno] != pal) {
-				update_hw = 1;
-				palette[regno] = pal;
-			}
-			break;
-		}
-		break;
-	}
-
-	/* Truecolor has hardware independent palette */
-	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
-		u32 v;
-
-		if (regno > 15)
-			return -EINVAL;
-
-		v = (red << info->var.red.offset) |
-			(green << info->var.green.offset) |
-			(blue << info->var.blue.offset);
-
-		((u32 *) (info->pseudo_palette))[regno] = v;
-		if (palette[0] != 0x4000) {
-			update_hw = 1;
-			palette[0] = 0x4000;
-		}
-	}
-
-	/* Update the palette in the h/w as needed. */
-	if (update_hw)
-		lcd_blit(LOAD_PALETTE, par);
-
-	return 0;
-}
-#undef CNVT_TOHW
-
-static void da8xx_fb_lcd_reset(void)
-{
-	/* DMA has to be disabled */
-	lcdc_write(0, LCD_DMA_CTRL_REG);
-	lcdc_write(0, LCD_RASTER_CTRL_REG);
-
-	if (lcd_revision == LCD_VERSION_2) {
-		lcdc_write(0, LCD_INT_ENABLE_SET_REG);
-		/* Write 1 to reset */
-		lcdc_write(LCD_CLK_MAIN_RESET, LCD_CLK_RESET_REG);
-		lcdc_write(0, LCD_CLK_RESET_REG);
-	}
-}
-
-static int da8xx_fb_config_clk_divider(struct da8xx_fb_par *par,
-					      unsigned lcdc_clk_div,
-					      unsigned lcdc_clk_rate)
-{
-	int ret;
-
-	if (par->lcdc_clk_rate != lcdc_clk_rate) {
-		ret = clk_set_rate(par->lcdc_clk, lcdc_clk_rate);
-		if (ret) {
-			dev_err(par->dev,
-				"unable to set clock rate at %u\n",
-				lcdc_clk_rate);
-			return ret;
-		}
-		par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
-	}
-
-	/* Configure the LCD clock divisor. */
-	lcdc_write(LCD_CLK_DIVISOR(lcdc_clk_div) |
-			(LCD_RASTER_MODE & 0x1), LCD_CTRL_REG);
-
-	if (lcd_revision == LCD_VERSION_2)
-		lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
-				LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG);
-
-	return 0;
-}
-
-static unsigned int da8xx_fb_calc_clk_divider(struct da8xx_fb_par *par,
-					      unsigned pixclock,
-					      unsigned *lcdc_clk_rate)
-{
-	unsigned lcdc_clk_div;
-
-	pixclock = PICOS2KHZ(pixclock) * 1000;
-
-	*lcdc_clk_rate = par->lcdc_clk_rate;
-
-	if (pixclock < (*lcdc_clk_rate / CLK_MAX_DIV)) {
-		*lcdc_clk_rate = clk_round_rate(par->lcdc_clk,
-						pixclock * CLK_MAX_DIV);
-		lcdc_clk_div = CLK_MAX_DIV;
-	} else if (pixclock > (*lcdc_clk_rate / CLK_MIN_DIV)) {
-		*lcdc_clk_rate = clk_round_rate(par->lcdc_clk,
-						pixclock * CLK_MIN_DIV);
-		lcdc_clk_div = CLK_MIN_DIV;
-	} else {
-		lcdc_clk_div = *lcdc_clk_rate / pixclock;
-	}
-
-	return lcdc_clk_div;
-}
-
-static int da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par,
-					    struct fb_videomode *mode)
-{
-	unsigned lcdc_clk_rate;
-	unsigned lcdc_clk_div = da8xx_fb_calc_clk_divider(par, mode->pixclock,
-							  &lcdc_clk_rate);
-
-	return da8xx_fb_config_clk_divider(par, lcdc_clk_div, lcdc_clk_rate);
-}
-
-static unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par,
-					  unsigned pixclock)
-{
-	unsigned lcdc_clk_div, lcdc_clk_rate;
-
-	lcdc_clk_div = da8xx_fb_calc_clk_divider(par, pixclock, &lcdc_clk_rate);
-	return KHZ2PICOS(lcdc_clk_rate / (1000 * lcdc_clk_div));
-}
-
-static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
-		struct fb_videomode *panel)
-{
-	u32 bpp;
-	int ret = 0;
-
-	ret = da8xx_fb_calc_config_clk_divider(par, panel);
-	if (ret) {
-		dev_err(par->dev, "unable to configure clock\n");
-		return ret;
-	}
-
-	if (panel->sync & FB_SYNC_CLK_INVERT)
-		lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) |
-			LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG);
-	else
-		lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) &
-			~LCD_INVERT_PIXEL_CLOCK), LCD_RASTER_TIMING_2_REG);
-
-	/* Configure the DMA burst size and fifo threshold. */
-	ret = lcd_cfg_dma(cfg->dma_burst_sz, cfg->fifo_th);
-	if (ret < 0)
-		return ret;
-
-	/* Configure the vertical and horizontal sync properties. */
-	lcd_cfg_vertical_sync(panel->upper_margin, panel->vsync_len,
-			panel->lower_margin);
-	lcd_cfg_horizontal_sync(panel->left_margin, panel->hsync_len,
-			panel->right_margin);
-
-	/* Configure for disply */
-	ret = lcd_cfg_display(cfg, panel);
-	if (ret < 0)
-		return ret;
-
-	bpp = cfg->bpp;
-
-	if (bpp == 12)
-		bpp = 16;
-	ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->xres,
-				(unsigned int)panel->yres, bpp,
-				cfg->raster_order);
-	if (ret < 0)
-		return ret;
-
-	/* Configure FDD */
-	lcdc_write((lcdc_read(LCD_RASTER_CTRL_REG) & 0xfff00fff) |
-		       (cfg->fdd << 12), LCD_RASTER_CTRL_REG);
-
-	return 0;
-}
-
-/* IRQ handler for version 2 of LCDC */
-static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
-{
-	struct da8xx_fb_par *par = arg;
-	u32 stat = lcdc_read(LCD_MASKED_STAT_REG);
-
-	if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
-		lcd_disable_raster(DA8XX_FRAME_NOWAIT);
-		lcdc_write(stat, LCD_MASKED_STAT_REG);
-		lcd_enable_raster();
-	} else if (stat & LCD_PL_LOAD_DONE) {
-		/*
-		 * Must disable raster before changing state of any control bit.
-		 * And also must be disabled before clearing the PL loading
-		 * interrupt via the following write to the status register. If
-		 * this is done after then one gets multiple PL done interrupts.
-		 */
-		lcd_disable_raster(DA8XX_FRAME_NOWAIT);
-
-		lcdc_write(stat, LCD_MASKED_STAT_REG);
-
-		/* Disable PL completion interrupt */
-		lcdc_write(LCD_V2_PL_INT_ENA, LCD_INT_ENABLE_CLR_REG);
-
-		/* Setup and start data loading mode */
-		lcd_blit(LOAD_DATA, par);
-	} else {
-		lcdc_write(stat, LCD_MASKED_STAT_REG);
-
-		if (stat & LCD_END_OF_FRAME0) {
-			par->which_dma_channel_done = 0;
-			lcdc_write(par->dma_start,
-				   LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-			lcdc_write(par->dma_end,
-				   LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
-			par->vsync_flag = 1;
-			wake_up_interruptible(&par->vsync_wait);
-		}
-
-		if (stat & LCD_END_OF_FRAME1) {
-			par->which_dma_channel_done = 1;
-			lcdc_write(par->dma_start,
-				   LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
-			lcdc_write(par->dma_end,
-				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
-			par->vsync_flag = 1;
-			wake_up_interruptible(&par->vsync_wait);
-		}
-
-		/* Set only when controller is disabled and at the end of
-		 * active frame
-		 */
-		if (stat & BIT(0)) {
-			frame_done_flag = 1;
-			wake_up_interruptible(&frame_done_wq);
-		}
-	}
-
-	lcdc_write(0, LCD_END_OF_INT_IND_REG);
-	return IRQ_HANDLED;
-}
-
-/* IRQ handler for version 1 LCDC */
-static irqreturn_t lcdc_irq_handler_rev01(int irq, void *arg)
-{
-	struct da8xx_fb_par *par = arg;
-	u32 stat = lcdc_read(LCD_STAT_REG);
-	u32 reg_ras;
-
-	if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
-		lcd_disable_raster(DA8XX_FRAME_NOWAIT);
-		lcdc_write(stat, LCD_STAT_REG);
-		lcd_enable_raster();
-	} else if (stat & LCD_PL_LOAD_DONE) {
-		/*
-		 * Must disable raster before changing state of any control bit.
-		 * And also must be disabled before clearing the PL loading
-		 * interrupt via the following write to the status register. If
-		 * this is done after then one gets multiple PL done interrupts.
-		 */
-		lcd_disable_raster(DA8XX_FRAME_NOWAIT);
-
-		lcdc_write(stat, LCD_STAT_REG);
-
-		/* Disable PL completion inerrupt */
-		reg_ras  = lcdc_read(LCD_RASTER_CTRL_REG);
-		reg_ras &= ~LCD_V1_PL_INT_ENA;
-		lcdc_write(reg_ras, LCD_RASTER_CTRL_REG);
-
-		/* Setup and start data loading mode */
-		lcd_blit(LOAD_DATA, par);
-	} else {
-		lcdc_write(stat, LCD_STAT_REG);
-
-		if (stat & LCD_END_OF_FRAME0) {
-			par->which_dma_channel_done = 0;
-			lcdc_write(par->dma_start,
-				   LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-			lcdc_write(par->dma_end,
-				   LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
-			par->vsync_flag = 1;
-			wake_up_interruptible(&par->vsync_wait);
-		}
-
-		if (stat & LCD_END_OF_FRAME1) {
-			par->which_dma_channel_done = 1;
-			lcdc_write(par->dma_start,
-				   LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
-			lcdc_write(par->dma_end,
-				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
-			par->vsync_flag = 1;
-			wake_up_interruptible(&par->vsync_wait);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int fb_check_var(struct fb_var_screeninfo *var,
-			struct fb_info *info)
-{
-	int err = 0;
-	struct da8xx_fb_par *par = info->par;
-	int bpp = var->bits_per_pixel >> 3;
-	unsigned long line_size = var->xres_virtual * bpp;
-
-	if (var->bits_per_pixel > 16 && lcd_revision == LCD_VERSION_1)
-		return -EINVAL;
-
-	switch (var->bits_per_pixel) {
-	case 1:
-	case 8:
-		var->red.offset = 0;
-		var->red.length = 8;
-		var->green.offset = 0;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		var->nonstd = 0;
-		break;
-	case 4:
-		var->red.offset = 0;
-		var->red.length = 4;
-		var->green.offset = 0;
-		var->green.length = 4;
-		var->blue.offset = 0;
-		var->blue.length = 4;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		var->nonstd = FB_NONSTD_REV_PIX_IN_B;
-		break;
-	case 16:		/* RGB 565 */
-		var->red.offset = 11;
-		var->red.length = 5;
-		var->green.offset = 5;
-		var->green.length = 6;
-		var->blue.offset = 0;
-		var->blue.length = 5;
-		var->transp.offset = 0;
-		var->transp.length = 0;
-		var->nonstd = 0;
-		break;
-	case 24:
-		var->red.offset = 16;
-		var->red.length = 8;
-		var->green.offset = 8;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->nonstd = 0;
-		break;
-	case 32:
-		var->transp.offset = 24;
-		var->transp.length = 8;
-		var->red.offset = 16;
-		var->red.length = 8;
-		var->green.offset = 8;
-		var->green.length = 8;
-		var->blue.offset = 0;
-		var->blue.length = 8;
-		var->nonstd = 0;
-		break;
-	default:
-		err = -EINVAL;
-	}
-
-	var->red.msb_right = 0;
-	var->green.msb_right = 0;
-	var->blue.msb_right = 0;
-	var->transp.msb_right = 0;
-
-	if (line_size * var->yres_virtual > par->vram_size)
-		var->yres_virtual = par->vram_size / line_size;
-
-	if (var->yres > var->yres_virtual)
-		var->yres = var->yres_virtual;
-
-	if (var->xres > var->xres_virtual)
-		var->xres = var->xres_virtual;
-
-	if (var->xres + var->xoffset > var->xres_virtual)
-		var->xoffset = var->xres_virtual - var->xres;
-	if (var->yres + var->yoffset > var->yres_virtual)
-		var->yoffset = var->yres_virtual - var->yres;
-
-	var->pixclock = da8xx_fb_round_clk(par, var->pixclock);
-
-	return err;
-}
-
-#ifdef CONFIG_CPU_FREQ
-static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
-				     unsigned long val, void *data)
-{
-	struct da8xx_fb_par *par;
-
-	par = container_of(nb, struct da8xx_fb_par, freq_transition);
-	if (val == CPUFREQ_POSTCHANGE) {
-		if (par->lcdc_clk_rate != clk_get_rate(par->lcdc_clk)) {
-			par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
-			lcd_disable_raster(DA8XX_FRAME_WAIT);
-			da8xx_fb_calc_config_clk_divider(par, &par->mode);
-			if (par->blank == FB_BLANK_UNBLANK)
-				lcd_enable_raster();
-		}
-	}
-
-	return 0;
-}
-
-static int lcd_da8xx_cpufreq_register(struct da8xx_fb_par *par)
-{
-	par->freq_transition.notifier_call = lcd_da8xx_cpufreq_transition;
-
-	return cpufreq_register_notifier(&par->freq_transition,
-					 CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-static void lcd_da8xx_cpufreq_deregister(struct da8xx_fb_par *par)
-{
-	cpufreq_unregister_notifier(&par->freq_transition,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-}
-#endif
-
-static void fb_remove(struct platform_device *dev)
-{
-	struct fb_info *info = platform_get_drvdata(dev);
-	struct da8xx_fb_par *par = info->par;
-	int ret;
-
-#ifdef CONFIG_CPU_FREQ
-	lcd_da8xx_cpufreq_deregister(par);
-#endif
-	if (par->lcd_supply) {
-		ret = regulator_disable(par->lcd_supply);
-		if (ret)
-			dev_warn(&dev->dev, "Failed to disable regulator (%pe)\n",
-				 ERR_PTR(ret));
-	}
-
-	lcd_disable_raster(DA8XX_FRAME_WAIT);
-	lcdc_write(0, LCD_RASTER_CTRL_REG);
-
-	/* disable DMA  */
-	lcdc_write(0, LCD_DMA_CTRL_REG);
-
-	unregister_framebuffer(info);
-	fb_dealloc_cmap(&info->cmap);
-	pm_runtime_put_sync(&dev->dev);
-	pm_runtime_disable(&dev->dev);
-	framebuffer_release(info);
-}
-
-/*
- * Function to wait for vertical sync which for this LCD peripheral
- * translates into waiting for the current raster frame to complete.
- */
-static int fb_wait_for_vsync(struct fb_info *info)
-{
-	struct da8xx_fb_par *par = info->par;
-	int ret;
-
-	/*
-	 * Set flag to 0 and wait for isr to set to 1. It would seem there is a
-	 * race condition here where the ISR could have occurred just before or
-	 * just after this set. But since we are just coarsely waiting for
-	 * a frame to complete then that's OK. i.e. if the frame completed
-	 * just before this code executed then we have to wait another full
-	 * frame time but there is no way to avoid such a situation. On the
-	 * other hand if the frame completed just after then we don't need
-	 * to wait long at all. Either way we are guaranteed to return to the
-	 * user immediately after a frame completion which is all that is
-	 * required.
-	 */
-	par->vsync_flag = 0;
-	ret = wait_event_interruptible_timeout(par->vsync_wait,
-					       par->vsync_flag != 0,
-					       par->vsync_timeout);
-	if (ret < 0)
-		return ret;
-	if (ret == 0)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-static int fb_ioctl(struct fb_info *info, unsigned int cmd,
-			  unsigned long arg)
-{
-	struct lcd_sync_arg sync_arg;
-
-	switch (cmd) {
-	case FBIOGET_CONTRAST:
-	case FBIOPUT_CONTRAST:
-	case FBIGET_BRIGHTNESS:
-	case FBIPUT_BRIGHTNESS:
-	case FBIGET_COLOR:
-	case FBIPUT_COLOR:
-		return -ENOTTY;
-	case FBIPUT_HSYNC:
-		if (copy_from_user(&sync_arg, (char *)arg,
-				sizeof(struct lcd_sync_arg)))
-			return -EFAULT;
-		lcd_cfg_horizontal_sync(sync_arg.back_porch,
-					sync_arg.pulse_width,
-					sync_arg.front_porch);
-		break;
-	case FBIPUT_VSYNC:
-		if (copy_from_user(&sync_arg, (char *)arg,
-				sizeof(struct lcd_sync_arg)))
-			return -EFAULT;
-		lcd_cfg_vertical_sync(sync_arg.back_porch,
-					sync_arg.pulse_width,
-					sync_arg.front_porch);
-		break;
-	case FBIO_WAITFORVSYNC:
-		return fb_wait_for_vsync(info);
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int cfb_blank(int blank, struct fb_info *info)
-{
-	struct da8xx_fb_par *par = info->par;
-	int ret = 0;
-
-	if (par->blank == blank)
-		return 0;
-
-	par->blank = blank;
-	switch (blank) {
-	case FB_BLANK_UNBLANK:
-		lcd_enable_raster();
-
-		if (par->lcd_supply) {
-			ret = regulator_enable(par->lcd_supply);
-			if (ret)
-				return ret;
-		}
-		break;
-	case FB_BLANK_NORMAL:
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		if (par->lcd_supply) {
-			ret = regulator_disable(par->lcd_supply);
-			if (ret)
-				return ret;
-		}
-
-		lcd_disable_raster(DA8XX_FRAME_WAIT);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-/*
- * Set new x,y offsets in the virtual display for the visible area and switch
- * to the new mode.
- */
-static int da8xx_pan_display(struct fb_var_screeninfo *var,
-			     struct fb_info *fbi)
-{
-	int ret = 0;
-	struct fb_var_screeninfo new_var;
-	struct da8xx_fb_par         *par = fbi->par;
-	struct fb_fix_screeninfo    *fix = &fbi->fix;
-	unsigned int end;
-	unsigned int start;
-	unsigned long irq_flags;
-
-	if (var->xoffset != fbi->var.xoffset ||
-			var->yoffset != fbi->var.yoffset) {
-		memcpy(&new_var, &fbi->var, sizeof(new_var));
-		new_var.xoffset = var->xoffset;
-		new_var.yoffset = var->yoffset;
-		if (fb_check_var(&new_var, fbi))
-			ret = -EINVAL;
-		else {
-			memcpy(&fbi->var, &new_var, sizeof(new_var));
-
-			start	= fix->smem_start +
-				new_var.yoffset * fix->line_length +
-				new_var.xoffset * fbi->var.bits_per_pixel / 8;
-			end	= start + fbi->var.yres * fix->line_length - 1;
-			par->dma_start	= start;
-			par->dma_end	= end;
-			spin_lock_irqsave(&par->lock_for_chan_update,
-					irq_flags);
-			if (par->which_dma_channel_done == 0) {
-				lcdc_write(par->dma_start,
-					   LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-				lcdc_write(par->dma_end,
-					   LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
-			} else if (par->which_dma_channel_done == 1) {
-				lcdc_write(par->dma_start,
-					   LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
-				lcdc_write(par->dma_end,
-					   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
-			}
-			spin_unlock_irqrestore(&par->lock_for_chan_update,
-					irq_flags);
-		}
-	}
-
-	return ret;
-}
-
-static int da8xxfb_set_par(struct fb_info *info)
-{
-	struct da8xx_fb_par *par = info->par;
-	int ret;
-	bool raster = da8xx_fb_is_raster_enabled();
-
-	if (raster)
-		lcd_disable_raster(DA8XX_FRAME_WAIT);
-
-	fb_var_to_videomode(&par->mode, &info->var);
-
-	par->cfg.bpp = info->var.bits_per_pixel;
-
-	info->fix.visual = (par->cfg.bpp <= 8) ?
-				FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-	info->fix.line_length = (par->mode.xres * par->cfg.bpp) / 8;
-
-	ret = lcd_init(par, &par->cfg, &par->mode);
-	if (ret < 0) {
-		dev_err(par->dev, "lcd init failed\n");
-		return ret;
-	}
-
-	par->dma_start = info->fix.smem_start +
-			 info->var.yoffset * info->fix.line_length +
-			 info->var.xoffset * info->var.bits_per_pixel / 8;
-	par->dma_end   = par->dma_start +
-			 info->var.yres * info->fix.line_length - 1;
-
-	lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-	lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
-	lcdc_write(par->dma_start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
-	lcdc_write(par->dma_end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
-
-	if (raster)
-		lcd_enable_raster();
-
-	return 0;
-}
-
-static const struct fb_ops da8xx_fb_ops = {
-	.owner = THIS_MODULE,
-	FB_DEFAULT_IOMEM_OPS,
-	.fb_check_var = fb_check_var,
-	.fb_set_par = da8xxfb_set_par,
-	.fb_setcolreg = fb_setcolreg,
-	.fb_pan_display = da8xx_pan_display,
-	.fb_ioctl = fb_ioctl,
-	.fb_blank = cfb_blank,
-};
-
-static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
-{
-	struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
-	struct fb_videomode *lcdc_info;
-	int i;
-
-	for (i = 0, lcdc_info = known_lcd_panels;
-		i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
-		if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
-			break;
-	}
-
-	if (i == ARRAY_SIZE(known_lcd_panels)) {
-		dev_err(&dev->dev, "no panel found\n");
-		return NULL;
-	}
-	dev_info(&dev->dev, "found %s panel\n", lcdc_info->name);
-
-	return lcdc_info;
-}
-
-static int fb_probe(struct platform_device *device)
-{
-	struct da8xx_lcdc_platform_data *fb_pdata =
-						dev_get_platdata(&device->dev);
-	struct lcd_ctrl_config *lcd_cfg;
-	struct fb_videomode *lcdc_info;
-	struct fb_info *da8xx_fb_info;
-	struct da8xx_fb_par *par;
-	struct clk *tmp_lcdc_clk;
-	int ret;
-	unsigned long ulcm;
-
-	if (fb_pdata == NULL) {
-		dev_err(&device->dev, "Can not get platform data\n");
-		return -ENOENT;
-	}
-
-	lcdc_info = da8xx_fb_get_videomode(device);
-	if (lcdc_info == NULL)
-		return -ENODEV;
-
-	da8xx_fb_reg_base = devm_platform_ioremap_resource(device, 0);
-	if (IS_ERR(da8xx_fb_reg_base))
-		return PTR_ERR(da8xx_fb_reg_base);
-
-	tmp_lcdc_clk = devm_clk_get(&device->dev, "fck");
-	if (IS_ERR(tmp_lcdc_clk))
-		return dev_err_probe(&device->dev, PTR_ERR(tmp_lcdc_clk),
-				     "Can not get device clock\n");
-
-	pm_runtime_enable(&device->dev);
-	pm_runtime_get_sync(&device->dev);
-
-	/* Determine LCD IP Version */
-	switch (lcdc_read(LCD_PID_REG)) {
-	case 0x4C100102:
-		lcd_revision = LCD_VERSION_1;
-		break;
-	case 0x4F200800:
-	case 0x4F201000:
-		lcd_revision = LCD_VERSION_2;
-		break;
-	default:
-		dev_warn(&device->dev, "Unknown PID Reg value 0x%x, "
-				"defaulting to LCD revision 1\n",
-				lcdc_read(LCD_PID_REG));
-		lcd_revision = LCD_VERSION_1;
-		break;
-	}
-
-	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
-
-	if (!lcd_cfg) {
-		ret = -EINVAL;
-		goto err_pm_runtime_disable;
-	}
-
-	da8xx_fb_info = framebuffer_alloc(sizeof(struct da8xx_fb_par),
-					&device->dev);
-	if (!da8xx_fb_info) {
-		ret = -ENOMEM;
-		goto err_pm_runtime_disable;
-	}
-
-	par = da8xx_fb_info->par;
-	par->dev = &device->dev;
-	par->lcdc_clk = tmp_lcdc_clk;
-	par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
-
-	par->lcd_supply = devm_regulator_get_optional(&device->dev, "lcd");
-	if (IS_ERR(par->lcd_supply)) {
-		if (PTR_ERR(par->lcd_supply) == -EPROBE_DEFER) {
-			ret = -EPROBE_DEFER;
-			goto err_release_fb;
-		}
-
-		par->lcd_supply = NULL;
-	} else {
-		ret = regulator_enable(par->lcd_supply);
-		if (ret)
-			goto err_release_fb;
-	}
-
-	fb_videomode_to_var(&da8xx_fb_var, lcdc_info);
-	par->cfg = *lcd_cfg;
-
-	da8xx_fb_lcd_reset();
-
-	/* allocate frame buffer */
-	par->vram_size = lcdc_info->xres * lcdc_info->yres * lcd_cfg->bpp;
-	ulcm = lcm((lcdc_info->xres * lcd_cfg->bpp)/8, PAGE_SIZE);
-	par->vram_size = roundup(par->vram_size/8, ulcm);
-	par->vram_size = par->vram_size * LCD_NUM_BUFFERS;
-
-	par->vram_virt = dmam_alloc_coherent(par->dev,
-					     par->vram_size,
-					     &par->vram_phys,
-					     GFP_KERNEL | GFP_DMA);
-	if (!par->vram_virt) {
-		dev_err(&device->dev,
-			"GLCD: kmalloc for frame buffer failed\n");
-		ret = -EINVAL;
-		goto err_disable_reg;
-	}
-
-	da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt;
-	da8xx_fb_fix.smem_start    = par->vram_phys;
-	da8xx_fb_fix.smem_len      = par->vram_size;
-	da8xx_fb_fix.line_length   = (lcdc_info->xres * lcd_cfg->bpp) / 8;
-
-	par->dma_start = par->vram_phys;
-	par->dma_end   = par->dma_start + lcdc_info->yres *
-		da8xx_fb_fix.line_length - 1;
-
-	/* allocate palette buffer */
-	par->v_palette_base = dmam_alloc_coherent(par->dev, PALETTE_SIZE,
-						  &par->p_palette_base,
-						  GFP_KERNEL | GFP_DMA);
-	if (!par->v_palette_base) {
-		dev_err(&device->dev,
-			"GLCD: kmalloc for palette buffer failed\n");
-		ret = -EINVAL;
-		goto err_release_fb;
-	}
-
-	par->irq = platform_get_irq(device, 0);
-	if (par->irq < 0) {
-		ret = -ENOENT;
-		goto err_release_fb;
-	}
-
-	da8xx_fb_var.grayscale =
-	    lcd_cfg->panel_shade == MONOCHROME ? 1 : 0;
-	da8xx_fb_var.bits_per_pixel = lcd_cfg->bpp;
-
-	/* Initialize fbinfo */
-	da8xx_fb_info->fix = da8xx_fb_fix;
-	da8xx_fb_info->var = da8xx_fb_var;
-	da8xx_fb_info->fbops = &da8xx_fb_ops;
-	da8xx_fb_info->pseudo_palette = par->pseudo_palette;
-	da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ?
-				FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
-
-	ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
-	if (ret)
-		goto err_disable_reg;
-	da8xx_fb_info->cmap.len = par->palette_sz;
-
-	/* initialize var_screeninfo */
-	da8xx_fb_var.activate = FB_ACTIVATE_FORCE;
-	fb_set_var(da8xx_fb_info, &da8xx_fb_var);
-
-	platform_set_drvdata(device, da8xx_fb_info);
-
-	/* initialize the vsync wait queue */
-	init_waitqueue_head(&par->vsync_wait);
-	par->vsync_timeout = HZ / 5;
-	par->which_dma_channel_done = -1;
-	spin_lock_init(&par->lock_for_chan_update);
-
-	/* Register the Frame Buffer  */
-	if (register_framebuffer(da8xx_fb_info) < 0) {
-		dev_err(&device->dev,
-			"GLCD: Frame Buffer Registration Failed!\n");
-		ret = -EINVAL;
-		goto err_dealloc_cmap;
-	}
-
-#ifdef CONFIG_CPU_FREQ
-	ret = lcd_da8xx_cpufreq_register(par);
-	if (ret) {
-		dev_err(&device->dev, "failed to register cpufreq\n");
-		goto err_cpu_freq;
-	}
-#endif
-
-	if (lcd_revision == LCD_VERSION_1)
-		lcdc_irq_handler = lcdc_irq_handler_rev01;
-	else {
-		init_waitqueue_head(&frame_done_wq);
-		lcdc_irq_handler = lcdc_irq_handler_rev02;
-	}
-
-	ret = devm_request_irq(&device->dev, par->irq, lcdc_irq_handler, 0,
-			       DRIVER_NAME, par);
-	if (ret)
-		goto irq_freq;
-	return 0;
-
-irq_freq:
-#ifdef CONFIG_CPU_FREQ
-	lcd_da8xx_cpufreq_deregister(par);
-err_cpu_freq:
-#endif
-	unregister_framebuffer(da8xx_fb_info);
-
-err_dealloc_cmap:
-	fb_dealloc_cmap(&da8xx_fb_info->cmap);
-
-err_disable_reg:
-	if (par->lcd_supply)
-		regulator_disable(par->lcd_supply);
-err_release_fb:
-	framebuffer_release(da8xx_fb_info);
-
-err_pm_runtime_disable:
-	pm_runtime_put_sync(&device->dev);
-	pm_runtime_disable(&device->dev);
-
-	return ret;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static struct lcdc_context {
-	u32 clk_enable;
-	u32 ctrl;
-	u32 dma_ctrl;
-	u32 raster_timing_0;
-	u32 raster_timing_1;
-	u32 raster_timing_2;
-	u32 int_enable_set;
-	u32 dma_frm_buf_base_addr_0;
-	u32 dma_frm_buf_ceiling_addr_0;
-	u32 dma_frm_buf_base_addr_1;
-	u32 dma_frm_buf_ceiling_addr_1;
-	u32 raster_ctrl;
-} reg_context;
-
-static void lcd_context_save(void)
-{
-	if (lcd_revision == LCD_VERSION_2) {
-		reg_context.clk_enable = lcdc_read(LCD_CLK_ENABLE_REG);
-		reg_context.int_enable_set = lcdc_read(LCD_INT_ENABLE_SET_REG);
-	}
-
-	reg_context.ctrl = lcdc_read(LCD_CTRL_REG);
-	reg_context.dma_ctrl = lcdc_read(LCD_DMA_CTRL_REG);
-	reg_context.raster_timing_0 = lcdc_read(LCD_RASTER_TIMING_0_REG);
-	reg_context.raster_timing_1 = lcdc_read(LCD_RASTER_TIMING_1_REG);
-	reg_context.raster_timing_2 = lcdc_read(LCD_RASTER_TIMING_2_REG);
-	reg_context.dma_frm_buf_base_addr_0 =
-		lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-	reg_context.dma_frm_buf_ceiling_addr_0 =
-		lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
-	reg_context.dma_frm_buf_base_addr_1 =
-		lcdc_read(LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
-	reg_context.dma_frm_buf_ceiling_addr_1 =
-		lcdc_read(LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
-	reg_context.raster_ctrl = lcdc_read(LCD_RASTER_CTRL_REG);
-	return;
-}
-
-static void lcd_context_restore(void)
-{
-	if (lcd_revision == LCD_VERSION_2) {
-		lcdc_write(reg_context.clk_enable, LCD_CLK_ENABLE_REG);
-		lcdc_write(reg_context.int_enable_set, LCD_INT_ENABLE_SET_REG);
-	}
-
-	lcdc_write(reg_context.ctrl, LCD_CTRL_REG);
-	lcdc_write(reg_context.dma_ctrl, LCD_DMA_CTRL_REG);
-	lcdc_write(reg_context.raster_timing_0, LCD_RASTER_TIMING_0_REG);
-	lcdc_write(reg_context.raster_timing_1, LCD_RASTER_TIMING_1_REG);
-	lcdc_write(reg_context.raster_timing_2, LCD_RASTER_TIMING_2_REG);
-	lcdc_write(reg_context.dma_frm_buf_base_addr_0,
-			LCD_DMA_FRM_BUF_BASE_ADDR_0_REG);
-	lcdc_write(reg_context.dma_frm_buf_ceiling_addr_0,
-			LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
-	lcdc_write(reg_context.dma_frm_buf_base_addr_1,
-			LCD_DMA_FRM_BUF_BASE_ADDR_1_REG);
-	lcdc_write(reg_context.dma_frm_buf_ceiling_addr_1,
-			LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
-	lcdc_write(reg_context.raster_ctrl, LCD_RASTER_CTRL_REG);
-	return;
-}
-
-static int fb_suspend(struct device *dev)
-{
-	struct fb_info *info = dev_get_drvdata(dev);
-	struct da8xx_fb_par *par = info->par;
-	int ret;
-
-	console_lock();
-	if (par->lcd_supply) {
-		ret = regulator_disable(par->lcd_supply);
-		if (ret)
-			return ret;
-	}
-
-	fb_set_suspend(info, 1);
-	lcd_disable_raster(DA8XX_FRAME_WAIT);
-	lcd_context_save();
-	pm_runtime_put_sync(dev);
-	console_unlock();
-
-	return 0;
-}
-static int fb_resume(struct device *dev)
-{
-	struct fb_info *info = dev_get_drvdata(dev);
-	struct da8xx_fb_par *par = info->par;
-	int ret;
-
-	console_lock();
-	pm_runtime_get_sync(dev);
-	lcd_context_restore();
-	if (par->blank == FB_BLANK_UNBLANK) {
-		lcd_enable_raster();
-
-		if (par->lcd_supply) {
-			ret = regulator_enable(par->lcd_supply);
-			if (ret)
-				return ret;
-		}
-	}
-
-	fb_set_suspend(info, 0);
-	console_unlock();
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume);
-
-static struct platform_driver da8xx_fb_driver = {
-	.probe = fb_probe,
-	.remove = fb_remove,
-	.driver = {
-		   .name = DRIVER_NAME,
-		   .pm	= &fb_pm_ops,
-		   },
-};
-module_platform_driver(da8xx_fb_driver);
-
-MODULE_DESCRIPTION("Framebuffer driver for TI da8xx/omap-l1xx");
-MODULE_AUTHOR("Texas Instruments");
-MODULE_LICENSE("GPL");
diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h
deleted file mode 100644
index 1d19ae62b844..000000000000
--- a/include/video/da8xx-fb.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Header file for TI DA8XX LCD controller platform data.
- *
- * Copyright (C) 2008-2009 MontaVista Software Inc.
- * Copyright (C) 2008-2009 Texas Instruments Inc
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef DA8XX_FB_H
-#define DA8XX_FB_H
-
-enum panel_shade {
-	MONOCHROME = 0,
-	COLOR_ACTIVE,
-	COLOR_PASSIVE,
-};
-
-enum raster_load_mode {
-	LOAD_DATA = 1,
-	LOAD_PALETTE,
-};
-
-enum da8xx_frame_complete {
-	DA8XX_FRAME_WAIT,
-	DA8XX_FRAME_NOWAIT,
-};
-
-struct da8xx_lcdc_platform_data {
-	const char manu_name[10];
-	void *controller_data;
-	const char type[25];
-};
-
-struct lcd_ctrl_config {
-	enum panel_shade panel_shade;
-
-	/* AC Bias Pin Frequency */
-	int ac_bias;
-
-	/* AC Bias Pin Transitions per Interrupt */
-	int ac_bias_intrpt;
-
-	/* DMA burst size */
-	int dma_burst_sz;
-
-	/* Bits per pixel */
-	int bpp;
-
-	/* FIFO DMA Request Delay */
-	int fdd;
-
-	/* TFT Alternative Signal Mapping (Only for active) */
-	unsigned char tft_alt_mode;
-
-	/* 12 Bit Per Pixel (5-6-5) Mode (Only for passive) */
-	unsigned char stn_565_mode;
-
-	/* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */
-	unsigned char mono_8bit_mode;
-
-	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
-	unsigned char sync_edge;
-
-	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
-	unsigned char raster_order;
-
-	/* DMA FIFO threshold */
-	int fifo_th;
-};
-
-struct lcd_sync_arg {
-	int back_porch;
-	int front_porch;
-	int pulse_width;
-};
-
-/* ioctls */
-#define FBIOGET_CONTRAST	_IOR('F', 1, int)
-#define FBIOPUT_CONTRAST	_IOW('F', 2, int)
-#define FBIGET_BRIGHTNESS	_IOR('F', 3, int)
-#define FBIPUT_BRIGHTNESS	_IOW('F', 3, int)
-#define FBIGET_COLOR		_IOR('F', 5, int)
-#define FBIPUT_COLOR		_IOW('F', 6, int)
-#define FBIPUT_HSYNC		_IOW('F', 9, int)
-#define FBIPUT_VSYNC		_IOW('F', 10, int)
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_CLK_INVERT 0x40000000
-
-#endif  /* ifndef DA8XX_FB_H */
-

From 51521d2e2c35959cc70a62ccddf694965e29c950 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 18 Oct 2024 15:12:49 +0000
Subject: [PATCH 5/5] fbdev: wm8505fb: select CONFIG_FB_IOMEM_FOPS

The fb_io_mmap() function is used in the file operations but
not enabled in all configurations unless FB_IOMEM_FOPS gets
selected:

ld.lld-20: error: undefined symbol: fb_io_mmap
   referenced by wm8505fb.c
   drivers/video/fbdev/wm8505fb.o:(wm8505fb_ops) in archive vmlinux.a

Fixes: 11754a504608 ("fbdev/wm8505fb: Initialize fb_ops to fbdev I/O-memory helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
---
 drivers/video/fbdev/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 77b50579bd09..de035071fedb 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1373,6 +1373,7 @@ config FB_VT8500
 config FB_WM8505
 	bool "Wondermedia WM8xxx-series frame buffer support"
 	depends on (FB = y) && HAS_IOMEM && (ARCH_VT8500 || COMPILE_TEST)
+	select FB_IOMEM_FOPS
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT