From d08c561325ba11c1ee42ab191c78f56d5d42af9f Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Thu, 27 Jun 2024 19:47:53 +0800 Subject: [PATCH 01/13] arm64: dts: amlogic: a5: add power domain controller node Add power domain controller node for Amlogic A5 SoC. Signed-off-by: Hongyu Chen Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240627-a5_secpower-v1-3-1f47dde1270c@amlogic.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi index 43f68a7da2f7..17a6316de891 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi @@ -4,6 +4,7 @@ */ #include "amlogic-a4-common.dtsi" +#include / { cpus { #address-cells = <2>; @@ -37,4 +38,13 @@ cpu3: cpu@300 { enable-method = "psci"; }; }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,a5-pwrc"; + #power-domain-cells = <1>; + }; + }; }; From 3ab9d54b5d8472c7a2eb28f3dd9610740fb8f0c1 Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Tue, 9 Jul 2024 17:32:03 +0800 Subject: [PATCH 02/13] arm64: dts: amlogic: enable some device nodes for S4 Enable more device nodes for AQ222 base S4, including SD, regulator and ethnernet node. Reviewed-by: Neil Armstrong Signed-off-by: Xianwei Zhao Link: https://lore.kernel.org/r/20240709-s4_node-v2-1-b9a218603c31@amlogic.com Signed-off-by: Neil Armstrong --- .../dts/amlogic/meson-s4-s805x2-aq222.dts | 145 ++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 128 ++++++++++++++++ 2 files changed, 273 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts index 983caddc409c..6730c44642d2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -34,6 +34,111 @@ secmon_reserved: secmon@5000000 { no-map; }; }; + + sdio_32k: sdio-32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&sdio_32k>; + clock-names = "ext_clock"; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + /* SY8120B1ABC DC/DC Regulator. */ + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <689000>; + regulator-max-microvolt = <1049000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ij 1 1500 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + /* Voltage Duty-Cycle */ + voltage-table = <1049000 0>, + <1039000 3>, + <1029000 6>, + <1019000 9>, + <1009000 12>, + <999000 14>, + <989000 17>, + <979000 20>, + <969000 23>, + <959000 26>, + <949000 29>, + <939000 31>, + <929000 34>, + <919000 37>, + <909000 40>, + <899000 43>, + <889000 45>, + <879000 48>, + <869000 51>, + <859000 54>, + <849000 56>, + <839000 59>, + <829000 62>, + <819000 65>, + <809000 68>, + <799000 70>, + <789000 73>, + <779000 76>, + <769000 79>, + <759000 81>, + <749000 84>, + <739000 87>, + <729000 89>, + <719000 92>, + <709000 95>, + <699000 98>, + <689000 100>; + }; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins1>; + pinctrl-names = "default"; +}; + +&pwm_ij { + status = "okay"; }; &uart_b { @@ -46,6 +151,40 @@ &ir { pinctrl-names = "default"; }; +&sdio { + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; + non-removable; + disable-wp; + no-sd; + no-mmc; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + &nand { status = "okay"; #address-cells = <1>; @@ -90,3 +229,9 @@ &spicc0 { pinctrl-0 = <&spicc0_pins_x>; cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; }; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index b686eacb9662..c11c947fa18c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include / { cpus { @@ -466,6 +467,93 @@ mux { }; }; + sdcard_pins: sdcard-pins { + mux { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_clk_c", + "sdcard_cmd_c"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_pins: sdcard-clk-gate-pins { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_pins: emmc-pins { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + emmc_ds_pins: emmc-ds-pins { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_clk_gate_pins: emmc-clk-gate-pins { + mux { + groups = "GPIOB_8"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_pins: sdio-pins { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + sdio_clk_gate_pins: sdio-clk-gate-pins { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + spicc0_pins_x: spicc0-pins_x { mux { groups = "spi_a_mosi_x", @@ -712,5 +800,45 @@ mdio0: mdio { compatible = "snps,dwmac-mdio"; }; }; + + sdio: mmc@fe088000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xfe088000 0x0 0x800>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SDEMMC_A>, + <&xtal>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + cap-sdio-irq; + keep-power-in-suspend; + status = "disabled"; + }; + + sd: mmc@fe08a000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xfe08a000 0x0 0x800>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SDEMMC_B>, + <&clkc_periphs CLKID_SD_EMMC_B>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + status = "disabled"; + }; + + emmc: mmc@fe08c000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xfe08c000 0x0 0x800>; + interrupts = ; + clocks = <&clkc_periphs CLKID_NAND>, + <&xtal>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_NAND_EMMC>; + no-sdio; + no-sd; + status = "disabled"; + }; }; }; From 48635ba6f7a15313675d71580ce1015e08e26d97 Mon Sep 17 00:00:00 2001 From: Huqiang Qin Date: Tue, 9 Jul 2024 16:48:26 +0800 Subject: [PATCH 03/13] arm64: dts: amlogic: add watchdog node for A4 SoCs Add watchdog device. Signed-off-by: Huqiang Qin Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240709-a4-a5_watchdog-v1-2-2ae852e05ec2@amlogic.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi index b6106ad4a072..496c3a2bcf25 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi @@ -52,6 +52,12 @@ apb: bus@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + watchdog@2100 { + compatible = "amlogic,a4-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + uart_b: serial@7a000 { compatible = "amlogic,a4-uart", "amlogic,meson-s4-uart"; From 4b26afe7d216183bcb2b1aa2c0096cafdf7a9ea2 Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Fri, 19 Jul 2024 16:08:11 +0800 Subject: [PATCH 04/13] arm64: dts: amlogic: s4: add ao secure node Add node for board info registers, which allows getting SoC family and board revision. For example, with MESON_GX_SOCINFO config enabled we can get the following information for board with Amlogic S4 SoC: soc soc0: Amlogic S4 (S805X2) Revision 37:a (2:1) Detecte Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240719-soc_info-v3-3-020a3b687c0c@amlogic.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index c11c947fa18c..957577d986c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -763,6 +763,14 @@ reset: reset-controller@2000 { #reset-cells = <1>; }; + sec_ao: ao-secure@10220 { + compatible = "amlogic,s4-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; + ir: ir@84040 { compatible = "amlogic,meson-s4-ir"; reg = <0x0 0x84040 0x0 0x30>; From 84ed73ee34d152032633e540f159c482ede4c10b Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Fri, 19 Jul 2024 16:08:12 +0800 Subject: [PATCH 05/13] arm64: dts: amlogic: c3: add ao secure node Add node for board info registers, which allows getting SoC family and board revision. For example, with MESON_GX_SOCINFO config enabled we can get the following information for board with Amlogic C3 SoC: soc soc0: Amlogic C3 (C308L) Revision 3d:a (1:1) Detected Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240719-soc_info-v3-4-020a3b687c0c@amlogic.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index f8fb060c49ae..c913dd409e64 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -129,6 +129,13 @@ uart_b: serial@7a000 { clock-names = "xtal", "pclk", "baud"; }; + sec_ao: ao-secure@10220 { + compatible = "amlogic,c3-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; From 4c23177c51884f5307e67875b1dc87d98543be7a Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Fri, 19 Jul 2024 16:08:13 +0800 Subject: [PATCH 06/13] arm64: dts: amlogic: t7: add ao secure node Add node for board info registers, which allows getting SoC family and board revision. For example, with MESON_GX_SOCINFO config enabled we can get the following information for board with Amlogic T7 SoC: soc soc0: Amlogic T7 (A311D2) Revision 36:c (1:1) Detected. Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240719-soc_info-v3-5-020a3b687c0c@amlogic.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi index c23efc6c7ac0..ec743cad57db 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi @@ -194,6 +194,14 @@ uart_a: serial@78000 { interrupts = ; status = "disabled"; }; + + sec_ao: ao-secure@10220 { + compatible = "amlogic,t7-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; From b2d7fd0ecb292e77a2d04cb6836c909cb6b6655b Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Fri, 19 Jul 2024 16:08:14 +0800 Subject: [PATCH 07/13] arm64: dts: amlogic: a4: add ao secure node Add node for board info registers, which allows getting SoC family and board revision. For example, with MESON_GX_SOCINFO config enabled we can get the following information for board with Amlogic A4 SoC: soc soc0: Amlogic A4 (A113L2) Revision 40:b (1:1) Detected. Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240719-soc_info-v3-6-020a3b687c0c@amlogic.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi index 496c3a2bcf25..54d7a2d56ef6 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi @@ -67,6 +67,14 @@ uart_b: serial@7a000 { clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + sec_ao: ao-secure@10220 { + compatible = "amlogic,a4-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; From 4ccba8cb2c5ca573d9bbf366e7d9d5e9761518c0 Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Fri, 30 Aug 2024 13:26:08 +0800 Subject: [PATCH 08/13] dt-bindings: clock: fix C3 PLL input parameter Add C3 PLL controller input clock parameters "fix". The clock named "fix" was initially implemented in PLL clock controller driver. However, some registers required secure zone access, so we moved it to the secure zone (BL31) and accessed it through SCMI. Since the PLL clock driver needs to use this clock, the "fix" clock is used as an input source. We updated the driver but forgot to modify the binding accordingly, so we are adding it here. It is an ABI break but on a new and immature platform. Noboby could really use that platform at this stage, so nothing is going to break on anyone really. Fixes: 0e6be855a96d ("dt-bindings: clock: add Amlogic C3 PLL clock controller") Reviewed-by: Krzysztof Kozlowski Signed-off-by: Xianwei Zhao Link: https://lore.kernel.org/r/20240830-c3_add_node-v4-1-b56c0511e9dc@amlogic.com Signed-off-by: Neil Armstrong --- .../devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml index 43de3c6fc1cf..700865cc9792 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml +++ b/Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml @@ -24,11 +24,13 @@ properties: items: - description: input top pll - description: input mclk pll + - description: input fix pll clock-names: items: - const: top - const: mclk + - const: fix "#clock-cells": const: 1 @@ -52,8 +54,9 @@ examples: compatible = "amlogic,c3-pll-clkc"; reg = <0x0 0x8000 0x0 0x1a4>; clocks = <&scmi_clk 2>, - <&scmi_clk 5>; - clock-names = "top", "mclk"; + <&scmi_clk 5>, + <&scmi_clk 12>; + clock-names = "top", "mclk", "fix"; #clock-cells = <1>; }; }; From 520b792e83171efc8ec0b004412b44dabc044de0 Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Fri, 30 Aug 2024 13:26:09 +0800 Subject: [PATCH 09/13] arm64: dts: amlogic: add some device nodes for C3 Add some device nodes for SoC C3, including periphs clock controller node, PLL clock controller node, SPICC node, regulator node, NAND controller node, sdcard node, Ethernet MAC and PHY node. The sdacrd depends on regulator and pinctrl(select), so some property fields are placed at the board level. The nand chip is placed on the board, So some property fields about SPIFC and NAND controller node are placed at the board level. THe Ethernet MAC support outchip PHY, so place this property field(select PHY) at the board level. Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240830-c3_add_node-v4-2-b56c0511e9dc@amlogic.com Signed-off-by: Neil Armstrong --- .../dts/amlogic/amlogic-c3-c302x-aw409.dts | 233 +++++++++ arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 488 +++++++++++++++++- 2 files changed, 720 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts index edce8850b338..b8d2037afc00 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts @@ -16,14 +16,247 @@ / { aliases { serial0 = &uart_b; + spi0 = &spifc; }; memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x10000000>; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 9 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@7f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x07f00000 0x0 0x900000>; + no-map; + }; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddq: regulator-vddq { + compatible = "regulator-fixed"; + regulator-name = "VDDQ"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + ddr4_2v5: regulator-ddr4-2v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR4_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD1V8_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_b: regulator-vddio-3v3-b { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + sdcard: regulator-sdcard { + compatible = "regulator-fixed"; + regulator-name = "SDCARD_POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; }; &uart_b { status = "okay"; }; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&spifc { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <83000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "system"; + reg = <0x600000 0xa00000>; + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x1000000 0x3000000>; + }; + + partition@4000000 { + label = "data"; + reg = <0x4000000 0x8000000>; + }; + }; + }; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default","clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdcard>; + vqmmc-supply = <&sdcard>; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index c913dd409e64..c0ce776ec463 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -7,6 +7,11 @@ #include #include #include +#include +#include +#include +#include +#include / { cpus { @@ -57,6 +62,34 @@ pwrc: power-controller { }; }; + sram { + compatible = "mmio-sram"; + reg = <0x0 0x07f50e00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x07f50e00 0x100>; + + scmi_shmem: sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x100>; + }; + }; + + firmware { + scmi: scmi { + compatible = "arm,scmi-smc"; + arm,smc-id = <0x820000C1>; + shmem = <&scmi_shmem>; + #address-cells = <1>; + #size-cells = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -82,6 +115,44 @@ apb4: bus@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,c3-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + #clock-cells = <1>; + clocks = <&xtal>, + <&scmi_clk CLKID_OSC>, + <&scmi_clk CLKID_FIXED_PLL_OSC>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_GP0_PLL>, + <&scmi_clk CLKID_GP1_PLL_OSC>, + <&clkc_pll CLKID_HIFI_PLL>, + <&scmi_clk CLKID_SYS_CLK>, + <&scmi_clk CLKID_AXI_CLK>, + <&scmi_clk CLKID_SYS_PLL_DIV16>, + <&scmi_clk CLKID_CPU_CLK_DIV16>; + clock-names = "xtal_24m", + "oscin", + "fix", + "fdiv2", + "fdiv2p5", + "fdiv3", + "fdiv4", + "fdiv5", + "fdiv7", + "gp0", + "gp1", + "hifi", + "sysclk", + "axiclk", + "sysplldiv16", + "cpudiv16"; + }; + reset: reset-controller@2000 { compatible = "amlogic,c3-reset"; reg = <0x0 0x2000 0x0 0x98>; @@ -108,6 +179,237 @@ gpio: bank@4000 { #gpio-cells = <2>; gpio-ranges = <&periphs_pinctrl 0 0 55>; }; + + i2c0_pins1: i2c0-pins1 { + mux { + groups = "i2c0_sda_e", + "i2c0_scl_e"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_pins2: i2c0-pins2 { + mux { + groups = "i2c0_sda_d", + "i2c0_scl_d"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins1: i2c1-pins1 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins2: i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins3: i2c1-pins3 { + mux { + groups = "i2c1_sda_a", + "i2c1_scl_a"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_pins4: i2c1-pins4 { + mux { + groups = "i2c1_sda_b", + "i2c1_scl_b"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_pins1: i2c2-pins1 { + mux { + groups = "i2c2_sda", + "i2c2_scl"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins1: i2c3-pins1 { + mux { + groups = "i2c3_sda_c", + "i2c3_scl_c"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins2: i2c3-pins2 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_pins3: i2c3-pins3 { + mux { + groups = "i2c3_sda_d", + "i2c3_scl_d"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + sdcard_pins: sdcard-pins { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_clk", + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_pins: sdcard-clk-cmd-pins { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_m_clk_gate_pins: sdio-m-clk-cmd-pins { + mux { + groups = "sdio_clk"; + function = "sdio"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_m_pins: sdio-m-all-pins { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + input-enable; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + }; + + spicc0_pins1: spicc0-pins1 { + mux { + groups = "spi_a_mosi_b", + "spi_a_miso_b", + "spi_a_clk_b"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins2: spicc0-pins2 { + mux { + groups = "spi_a_mosi_c", + "spi_a_miso_c", + "spi_a_clk_c"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins3: spicc0-pins3 { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc1_pins1: spicc1-pins1 { + mux { + groups = "spi_b_mosi_d", + "spi_b_miso_d", + "spi_b_clk_d"; + function = "spi_b"; + drive-strength-microamp = <3000>; + }; + }; + + spicc1_pins2: spicc1-pins2 { + mux { + groups = "spi_b_mosi_x", + "spi_b_miso_x", + "spi_b_clk_x"; + function = "spi_b"; + drive-strength-microamp = <3000>; + }; + }; + + spifc_pins: spifc-pins { + mux { + groups = "spif_mo", + "spif_mi", + "spif_clk", + "spif_cs", + "spif_hold", + "spif_wp", + "spif_clk_loop"; + function = "spif"; + drive-strength-microamp = <4000>; + }; + }; }; gpio_intc: interrupt-controller@4080 { @@ -119,13 +421,131 @@ gpio_intc: interrupt-controller@4080 { <10 11 12 13 14 15 16 17 18 19 20 21>; }; + clkc_pll: clock-controller@8000 { + compatible = "amlogic,c3-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1a4>; + #clock-cells = <1>; + clocks = <&scmi_clk CLKID_TOP_PLL_OSC>, + <&scmi_clk CLKID_MCLK_PLL_OSC>, + <&scmi_clk CLKID_FIXED_PLL_OSC>; + clock-names = "top", + "mclk", + "fix"; + }; + + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + clocks = <&clkc_periphs CLKID_SYS_ETH_PHY>, + <&xtal>, + <&clkc_pll CLKID_FCLK_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = ; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SPICC_0>, + <&clkc_periphs CLKID_SPICC_A>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spicc1: spi@52000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x52000 0x0 0x44>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SPICC_1>, + <&clkc_periphs CLKID_SPICC_B>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spifc: spi@56000 { + compatible = "amlogic,a1-spifc"; + reg = <0x0 0x56000 0x0 0x290>; + interrupts = ; + clocks = <&clkc_periphs CLKID_SPIFC>; + clock-names = "core"; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x24>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_A>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x24>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_B>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x24>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_C>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x24>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_SYS_I2C_M_D>; + status = "disabled"; + }; + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = ; status = "disabled"; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_SYS_UART_B>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; @@ -136,6 +556,72 @@ sec_ao: ao-secure@10220 { reg = <0x0 0x10220 0x0 0x140>; amlogic,has-chip-id; }; + + sdio: mmc@88000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x88000 0x0 0x800>; + interrupts = ; + power-domains = <&pwrc PWRC_C3_SDIOA_ID>; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_A>, + <&clkc_periphs CLKID_SD_EMMC_A>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core","clkin0", "clkin1"; + no-mmc; + no-sd; + resets = <&reset RESET_SD_EMMC_A>; + status = "disabled"; + }; + + sd: mmc@8a000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x8a000 0x0 0x800>; + interrupts = ; + power-domains = <&pwrc PWRC_C3_SDCARD_ID>; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_B>, + <&clkc_periphs CLKID_SD_EMMC_B>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + no-mmc; + no-sdio; + resets = <&reset RESET_SD_EMMC_B>; + status = "disabled"; + }; + + nand: nand-controller@8d000 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8d000 0x0 0x200>, + <0x0 0x8C000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = ; + clocks = <&clkc_periphs CLKID_SYS_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-g12a-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + interrupts = ; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_C3_ETH_ID>; + clocks = <&clkc_periphs CLKID_SYS_ETH_MAC>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_50M>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; }; From d4bd8f3023b68f72431e05ec6cbc793519b449cf Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Fri, 30 Aug 2024 13:26:10 +0800 Subject: [PATCH 10/13] arm64: dts: amlogic: add C3 AW419 board Add Amlogic C3 C308L AW419 board. The corresponding binding has been applied, therefore, this series does not need to add a binding corresponding to the AW419 board. Reviewed-by: Neil Armstrong Signed-off-by: Xianwei Zhao Link: https://lore.kernel.org/r/20240830-c3_add_node-v4-3-b56c0511e9dc@amlogic.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../dts/amlogic/amlogic-c3-c308l-aw419.dts | 262 ++++++++++++++++++ 2 files changed, 263 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 29417f04f886..2fbda8419c65 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts new file mode 100644 index 000000000000..4477a2659e27 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-c3.dtsi" + +/ { + model = "Amlogic C308l aw419 Development Board"; + compatible = "amlogic,aw419", "amlogic,c3"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + spi0 = &spifc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 9 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@7f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x07f00000 0x0 0x900000>; + no-map; + }; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddq: regulator-vddq { + compatible = "regulator-fixed"; + regulator-name = "VDDQ"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + ddr4_2v5: regulator-ddr4-2v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR4_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD1V8_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_b: regulator-vddio-3v3-b { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + sdcard: regulator-sdcard { + compatible = "regulator-fixed"; + regulator-name = "SDCARD_POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart_b { + status = "okay"; +}; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&spifc { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <83000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "system"; + reg = <0x600000 0xa00000>; + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x1000000 0x3000000>; + }; + + partition@4000000 { + label = "data"; + reg = <0x4000000 0x8000000>; + }; + }; + }; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default","clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdcard>; + vqmmc-supply = <&sdcard>; +}; From ca55a30d27cb37c07f58e5c3448f4d19edb1829c Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Mon, 2 Sep 2024 13:29:39 +0800 Subject: [PATCH 11/13] arm64: dts: amlogic: c3: fix dtbcheck warning Fix warning when use W=1 to build dtb, as following error: arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:65.7-76.4: Warning (unit_address_vs_reg): /sram: node has a reg or ranges property, but no unit name arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning (unit_address_vs_reg): /soc/bus@fe000000/pinctrl@4000: node has a unit name, but no reg or ranges property arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning (simple_bus_reg): /soc/bus@fe000000/pinctrl@4000: missing or empty reg/ranges property arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts:205.9-245.4: Warning (avoid_unnecessary_addr_size): /soc/bus@fe000000/spi@56000 /nand@0: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" property Fixes: d4bd8f3023b6 ("arm64: dts: amlogic: add C3 AW419 board") Fixes: 520b792e8317 ("arm64: dts: amlogic: add some device nodes for C3") Reported-by: kernel test robot Closes: https://lore.kernel.org/r/202409010005.A7tSzgEn-lkp@intel.com/ Signed-off-by: Xianwei Zhao Link: https://lore.kernel.org/r/20240902-fix_warning-v1-1-037029c584fc@amlogic.com Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts | 2 -- arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts | 2 -- arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 10 +++++----- 3 files changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts index b8d2037afc00..a6736ad2a648 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts @@ -208,8 +208,6 @@ nand@0 { spi-max-frequency = <83000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; - #address-cells = <1>; - #size-cells = <1>; status = "disabled"; partitions { diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts index 4477a2659e27..45f8631f9feb 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts @@ -208,8 +208,6 @@ nand@0 { spi-max-frequency = <83000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; - #address-cells = <1>; - #size-cells = <1>; status = "disabled"; partitions { diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index c0ce776ec463..d0cda759c25d 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -62,7 +62,7 @@ pwrc: power-controller { }; }; - sram { + sram@7f50e00 { compatible = "mmio-sram"; reg = <0x0 0x07f50e00 0x0 0x100>; #address-cells = <1>; @@ -169,11 +169,11 @@ periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,c3-periphs-pinctrl"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x02de>; - gpio: bank@4000 { - reg = <0x0 0x4000 0x0 0x004c>, - <0x0 0x4100 0x0 0x01de>; + gpio: bank@0 { + reg = <0x0 0x0 0x0 0x004c>, + <0x0 0x100 0x0 0x01de>; reg-names = "mux", "gpio"; gpio-controller; #gpio-cells = <2>; From 9b5d25117985e51faf61a808c4b3e15432d55f85 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 28 Aug 2024 15:53:56 +0200 Subject: [PATCH 12/13] arm64: dts: amlogic: add clock and clock-names to sound cards Add the missing clocks in the sound card nodes according to the AXG and GX sound card bindings changes. It solves the following errors: sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml# sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected) from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml# sound: 'anyOf' conditional failed, one must be fixed: 'clocks' is a required property '#clock-cells' is a required property from schema $id: http://devicetree.org/schemas/clock/clock.yaml# Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-3-58159abf0779@linaro.org Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++ .../boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts | 4 ++++ .../dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi | 6 ++++++ arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 4 ++++ .../arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 ++++ .../boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts | 4 ++++ .../arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts | 5 +++++ arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts | 4 ++++ arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts | 4 ++++ 50 files changed, 203 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 7ed526f45175..9611775b81ee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -268,6 +268,10 @@ sound { "Speaker1 Right", "SPK1 OUT_D", "Linein AINL", "Linein", "Linein AINR", "Linein"; + clocks = <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_HIFI_PLL>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts index af211d8f3952..a457b3f4397b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts @@ -176,6 +176,10 @@ sound { "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts index 15b9bc280706..c779a5da7d1e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts @@ -138,6 +138,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 61cb8135a392..ea51341f031b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -201,6 +201,10 @@ sound { "TODDR_B IN 1", "TDMIN_B OUT", "TODDR_C IN 1", "TDMIN_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 0e239939ade6..f70a46967e2b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -238,6 +238,10 @@ sound { "Lineout", "10U2 OUTL", "Lineout", "10U2 OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 05c7a1e3f1b7..32f98a192494 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -158,6 +158,10 @@ sound { "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts index 13d478f9c891..2d74456e685d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts @@ -70,6 +70,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts index 003efed529ba..0f48c32bec97 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts @@ -79,6 +79,10 @@ sound { "LINPUT1", "Mic Jack", "Mic Jack", "MICB"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 6a346cb86a53..d4e1990b5f26 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -194,6 +194,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi index 3a24c2411552..de35fa2d7a6d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi @@ -38,6 +38,12 @@ sound { "SPDIFOUT_A IN 0", "FRDDR_A OUT 3", "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts index bb73e10b5e74..369c5cf889b6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts @@ -48,6 +48,10 @@ sound { "TDMOUT_A IN 2", "FRDDR_C OUT 1", "TDM_A Playback", "TDMOUT_A OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index 6eeedd54ab91..654449afd3a4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -49,6 +49,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 0da386cabe1a..e20311386745 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -37,6 +37,10 @@ sound { "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts index eed2a23047ca..e21831dfceee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts @@ -234,6 +234,10 @@ sound { "Internal Speakers", "Speaker Amplifier OUTL", "Internal Speakers", "Speaker Amplifier OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 86eb81112232..3bca8023638d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -95,6 +95,10 @@ sound { "Lineout", "U19 OUTL", "Lineout", "U19 OUTR"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts index e26f3e3258e1..1b9097a30251 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts @@ -39,6 +39,10 @@ sound { "TODDR_B IN 6", "TDMIN_LB OUT", "TODDR_C IN 6", "TDMIN_LB OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts index 8445701100d0..39feba7f2d08 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts @@ -176,6 +176,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index 6396f190d703..4c1a75b926ee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -32,6 +32,10 @@ sound { "SPDIFOUT_A IN 1", "FRDDR_B OUT 3", "SPDIFOUT_A IN 2", "FRDDR_C OUT 3"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi index efd662a452e8..d38c3a224fbe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -194,6 +194,10 @@ sound { "AU2 INR", "ACODEC LORN", "7J4-14 LEFT", "AU2 OUTL", "7J4-11 RIGHT", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 08d6b69ba469..45ccddd1aaf0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -129,6 +129,10 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index f28452b9f00f..073b47ce8c3c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -45,6 +45,10 @@ button-reset { sound { compatible = "amlogic,gx-sound-card"; model = "KII-PRO"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 1fd2e56e6b08..cf2e2ef81680 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -135,6 +135,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "NANOPI-K2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index cca129ce2c58..7d7dde93fff3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -142,6 +142,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "NEXBOX-A95X"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c37cc6b036cd..959bd8d77a82 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -177,6 +177,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "ODROID-C2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 7f94716876d3..bfac00e76ba3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -68,6 +68,10 @@ button-menu { sound { compatible = "amlogic,gx-sound-card"; model = "P200"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index 6f81eed83bec..c10f66031ecd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -17,6 +17,10 @@ / { sound { compatible = "amlogic,gx-sound-card"; model = "P201"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 255e93a0b36d..3807a184810b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -108,6 +108,10 @@ sdio_pwrseq: sdio-pwrseq { sound { compatible = "amlogic,gx-sound-card"; model = "VEGA-S95"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index af9ea32a2876..ec281a9e9e77 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -16,6 +16,10 @@ / { sound { compatible = "amlogic,gx-sound-card"; model = "WETEK-HUB"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index 376760d86766..924414861b72 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -48,6 +48,10 @@ button { sound { compatible = "amlogic,gx-sound-card"; model = "WETEK-PLAY2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 90ef9c17d80b..c6132fb71dfc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -123,6 +123,10 @@ sound { "Speaker", "9J5-2 RIGHT"; audio-routing = "9J5-3 LEFT", "ACODEC LOLN", "9J5-2 RIGHT", "ACODEC LORN"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 08a4718219b1..c5e2306ad7a4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -128,6 +128,10 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index fea65f20523a..a80f0ea2773b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -67,6 +67,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "KHADAS-VIM"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 63b20860067c..6cbdfde00e12 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -160,6 +160,10 @@ vcc_1v8: regulator-vcc-1v8 { sound { compatible = "amlogic,gx-sound-card"; model = "LIBRETECH-CC-V2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 8b26c9661be1..401064b0428d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -142,6 +142,10 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 9b4ea6a49398..8b41e340f919 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -50,6 +50,10 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts index de996e930b82..a9c5881c9783 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts @@ -90,6 +90,11 @@ sound { "AU2 INR", "ACODEC LORN", "Lineout", "AU2 OUTL", "Lineout", "AU2 OUTR"; + + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 07e7c3bedea0..96a3dd2d8a99 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -150,6 +150,10 @@ wifi32k: wifi32k { sound { compatible = "amlogic,gx-sound-card"; model = "KHADAS-VIM2"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index ad2dd4ad0a31..773107cc47dd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -86,6 +86,10 @@ hdmi_connector_in: endpoint { sound { compatible = "amlogic,gx-sound-card"; model = "NEXBOX-A1"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index d05dde8da5c5..7356d3b628b1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -101,6 +101,10 @@ sdio_pwrseq: sdio-pwrseq { sound { compatible = "amlogic,gx-sound-card"; model = "RBOX-PRO"; + clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clocks = <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>, <&clkc CLKID_MPLL2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index e78cc9b577a0..7daa9b122d5c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -182,6 +182,10 @@ sound { "TODDR_B IN 0", "TDMIN_A OUT", "TODDR_C IN 0", "TDMIN_A OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi index 082b72703cdf..929e4720ae76 100644 --- a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi @@ -200,6 +200,10 @@ sound { <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&dioo2133>; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts index 9b2eb6e42651..3c43d3490e14 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts index 6e34fd80ed71..445c1671ede7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts index 586034316ec3..eeaff22edade 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index f045bf851638..697855fec476 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -57,6 +57,10 @@ sound { "Lineout", "ACODEC LOLP", "Lineout", "ACODEC LORP"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts index e6e9410d40cb..7b3a014d4cde 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index 951eb8e3f0c0..7b0e9817a615 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -174,6 +174,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 3581e14cbf18..2e3397e55da2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -239,6 +239,10 @@ sound { "TODDR_B IN 1", "TDMIN_B OUT", "TODDR_C IN 1", "TDMIN_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts index fc9b961133cd..e4a3a2a8ad06 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts index 9ea969255b4f..fff92e0d6dd5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts @@ -22,6 +22,10 @@ sound { "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT"; + clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; From e202307b75660aad42fafbb0d3df2c9dadf019ec Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 5 Sep 2024 09:02:10 +0200 Subject: [PATCH 13/13] arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatible Drop the undocumented amlogic,meson-gxlx-saradc compatible by dropping the compatible override, and fix the following DTBs check: /soc/bus@c1100000/adc@8680: failed to match any schema with compatible: ['amlogic,meson-gxlx-saradc', 'amlogic,meson-saradc'] Fixes: f6386b5afa81 ("arm64: dts: meson: add GXLX/S905L/p271 support") Link: https://lore.kernel.org/r/20240905-topic-amlogic-upstream-gxlx-drop-iio-compat-v2-1-7a690eb95bc2@linaro.org [narmstrong: fix commit message] Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts index 1221f4545130..942df754a0ed 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxlx-s905l-p271.dts @@ -38,10 +38,6 @@ mali: gpu@c0000 { }; }; -&saradc { - compatible = "amlogic,meson-gxlx-saradc", "amlogic,meson-saradc"; -}; - &usb { dr_mode = "host"; };