mirror of
https://github.com/torvalds/linux.git
synced 2026-05-31 10:33:41 +02:00
arm64: dts: cix: Add sky1 base dts initial support
CIX SKY1 SoC is high performance Armv9 SoC designed by Cixtech, and Orion O6 is the motherboard launched by Radxa. See below for detail: https://docs.radxa.com/en/orion/o6/getting-started/introduction In this commit, it only adds limited components for running initramfs at Orion O6. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Enric Balletbo i Serra <eballetb@redhat.com> Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com> Signed-off-by: Peter Chen <peter.chen@cixtech.com> Signed-off-by: Guomin Chen <Guomin.Chen@cixtech.com> Signed-off-by: Gary Yang <gary.yang@cixtech.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Peter Chen
Arnd Bergmann
parent
2b752ae023
commit
80be23bb20
|
|
@ -13,6 +13,7 @@ subdir-y += bitmain
|
|||
subdir-y += blaize
|
||||
subdir-y += broadcom
|
||||
subdir-y += cavium
|
||||
subdir-y += cix
|
||||
subdir-y += exynos
|
||||
subdir-y += freescale
|
||||
subdir-y += hisilicon
|
||||
|
|
|
|||
2
arch/arm64/boot/dts/cix/Makefile
Normal file
2
arch/arm64/boot/dts/cix/Makefile
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
|
||||
39
arch/arm64/boot/dts/cix/sky1-orion-o6.dts
Normal file
39
arch/arm64/boot/dts/cix/sky1-orion-o6.dts
Normal file
|
|
@ -0,0 +1,39 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright 2025 Cix Technology Group Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sky1.dtsi"
|
||||
/ {
|
||||
model = "Radxa Orion O6";
|
||||
compatible = "radxa,orion-o6", "cix,sky1";
|
||||
|
||||
aliases {
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
linux,cma {
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
size = <0x0 0x28000000>;
|
||||
linux,cma-default;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
330
arch/arm64/boot/dts/cix/sky1.dtsi
Normal file
330
arch/arm64/boot/dts/cix/sky1.dtsi
Normal file
|
|
@ -0,0 +1,330 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright 2025 Cix Technology Group Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/cix,sky1.h>
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
compatible = "arm,cortex-a520";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x0>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <403>;
|
||||
};
|
||||
|
||||
cpu1: cpu@100 {
|
||||
compatible = "arm,cortex-a520";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x100>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <403>;
|
||||
};
|
||||
|
||||
cpu2: cpu@200 {
|
||||
compatible = "arm,cortex-a520";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x200>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <403>;
|
||||
};
|
||||
|
||||
cpu3: cpu@300 {
|
||||
compatible = "arm,cortex-a520";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x300>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <403>;
|
||||
};
|
||||
|
||||
cpu4: cpu@400 {
|
||||
compatible = "arm,cortex-a720";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x400>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
|
||||
cpu5: cpu@500 {
|
||||
compatible = "arm,cortex-a720";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x500>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
|
||||
cpu6: cpu@600 {
|
||||
compatible = "arm,cortex-a720";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x600>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
|
||||
cpu7: cpu@700 {
|
||||
compatible = "arm,cortex-a720";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x700>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
|
||||
cpu8: cpu@800 {
|
||||
compatible = "arm,cortex-a720";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x800>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
|
||||
cpu9: cpu@900 {
|
||||
compatible = "arm,cortex-a720";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0x900>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
|
||||
cpu10: cpu@a00 {
|
||||
compatible = "arm,cortex-a720";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0xa00>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
|
||||
cpu11: cpu@b00 {
|
||||
compatible = "arm,cortex-a720";
|
||||
enable-method = "psci";
|
||||
reg = <0x0 0xb00>;
|
||||
device_type = "cpu";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
};
|
||||
|
||||
cpu-map {
|
||||
cluster0 {
|
||||
core0 {
|
||||
cpu = <&cpu0>;
|
||||
};
|
||||
core1 {
|
||||
cpu = <&cpu1>;
|
||||
};
|
||||
core2 {
|
||||
cpu = <&cpu2>;
|
||||
};
|
||||
core3 {
|
||||
cpu = <&cpu3>;
|
||||
};
|
||||
core4 {
|
||||
cpu = <&cpu4>;
|
||||
};
|
||||
core5 {
|
||||
cpu = <&cpu5>;
|
||||
};
|
||||
core6 {
|
||||
cpu = <&cpu6>;
|
||||
};
|
||||
core7 {
|
||||
cpu = <&cpu7>;
|
||||
};
|
||||
core8 {
|
||||
cpu = <&cpu8>;
|
||||
};
|
||||
core9 {
|
||||
cpu = <&cpu9>;
|
||||
};
|
||||
core10 {
|
||||
cpu = <&cpu10>;
|
||||
};
|
||||
core11 {
|
||||
cpu = <&cpu11>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
firmware {
|
||||
ap_to_pm_scmi: scmi {
|
||||
compatible = "arm,scmi";
|
||||
mbox-names = "tx", "rx";
|
||||
mboxes = <&mbox_ap2pm 8>, <&mbox_pm2ap 8>;
|
||||
shmem = <&ap2pm_scmi_mem>, <&pm2ap_scmi_mem>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
scmi_clk: protocol@14 {
|
||||
reg = <0x14>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmu-a520 {
|
||||
compatible = "arm,cortex-a520-pmu";
|
||||
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
|
||||
};
|
||||
|
||||
pmu-a720 {
|
||||
compatible = "arm,cortex-a720-pmu";
|
||||
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
soc@0 {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0 0 0 0 0x20 0>;
|
||||
dma-ranges;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
uart0: serial@40b0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0 0x040b0000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&scmi_clk CLK_TREE_FCH_UART0_FUNC>, <&scmi_clk CLK_TREE_FCH_UART0_APB>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart1: serial@40c0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0 0x040c0000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&scmi_clk CLK_TREE_FCH_UART1_FUNC>, <&scmi_clk CLK_TREE_FCH_UART1_APB>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart2: serial@40d0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0 0x040d0000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&scmi_clk CLK_TREE_FCH_UART2_FUNC>, <&scmi_clk CLK_TREE_FCH_UART2_APB>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart3: serial@40e0000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x0 0x040e0000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&scmi_clk CLK_TREE_FCH_UART3_FUNC>, <&scmi_clk CLK_TREE_FCH_UART3_APB>;
|
||||
clock-names = "uartclk", "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mbox_ap2se: mailbox@5060000 {
|
||||
compatible = "cix,sky1-mbox";
|
||||
reg = <0x0 0x05060000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
#mbox-cells = <1>;
|
||||
cix,mbox-dir = "tx";
|
||||
};
|
||||
|
||||
mbox_se2ap: mailbox@5070000 {
|
||||
compatible = "cix,sky1-mbox";
|
||||
reg = <0x0 0x05070000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
#mbox-cells = <1>;
|
||||
cix,mbox-dir = "rx";
|
||||
};
|
||||
|
||||
ap2pm_scmi_mem: shmem@6590000 {
|
||||
compatible = "arm,scmi-shmem";
|
||||
reg = <0x0 0x06590000 0x0 0x80>;
|
||||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
mbox_ap2pm: mailbox@6590080 {
|
||||
compatible = "cix,sky1-mbox";
|
||||
reg = <0x0 0x06590080 0x0 0xff80>;
|
||||
interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
#mbox-cells = <1>;
|
||||
cix,mbox-dir = "tx";
|
||||
};
|
||||
|
||||
pm2ap_scmi_mem: shmem@65a0000 {
|
||||
compatible = "arm,scmi-shmem";
|
||||
reg = <0x0 0x065a0000 0x0 0x80>;
|
||||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
mbox_pm2ap: mailbox@65a0080 {
|
||||
compatible = "cix,sky1-mbox";
|
||||
reg = <0x0 0x065a0080 0x0 0xff80>;
|
||||
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
#mbox-cells = <1>;
|
||||
cix,mbox-dir = "rx";
|
||||
};
|
||||
|
||||
mbox_sfh2ap: mailbox@8090000 {
|
||||
compatible = "cix,sky1-mbox";
|
||||
reg = <0x0 0x08090000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
#mbox-cells = <1>;
|
||||
cix,mbox-dir = "rx";
|
||||
};
|
||||
|
||||
mbox_ap2sfh: mailbox@80a0000 {
|
||||
compatible = "cix,sky1-mbox";
|
||||
reg = <0x0 0x080a0000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
#mbox-cells = <1>;
|
||||
cix,mbox-dir = "tx";
|
||||
};
|
||||
|
||||
gic: interrupt-controller@e010000 {
|
||||
compatible = "arm,gic-v3";
|
||||
reg = <0x0 0x0e010000 0 0x10000>, /* GICD */
|
||||
<0x0 0x0e090000 0 0x300000>; /* GICR * 12 */
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
|
||||
#interrupt-cells = <4>;
|
||||
interrupt-controller;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
gic_its: msi-controller@e050000 {
|
||||
compatible = "arm,gic-v3-its";
|
||||
reg = <0x0 0x0e050000 0x0 0x30000>;
|
||||
msi-controller;
|
||||
#msi-cells = <1>;
|
||||
};
|
||||
|
||||
ppi-partitions {
|
||||
ppi_partition0: interrupt-partition-0 {
|
||||
affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
|
||||
};
|
||||
|
||||
ppi_partition1: interrupt-partition-1 {
|
||||
affinity = <&cpu4 &cpu5 &cpu6 &cpu7 &cpu8 &cpu9 &cpu10 &cpu11>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
|
||||
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
|
||||
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
|
||||
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
|
||||
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>,
|
||||
<GIC_PPI 12 IRQ_TYPE_LEVEL_LOW 0>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user