iio: proximity: vcnl3020: fix ISR bitmask check in IRQ handler

The threaded IRQ handler contained multiple issues in handling interrupt
events and clearing status flags:

1. ISR bit check: The handler incorrectly checked the Interrupt Status
   Register (VCNL_ISR) against VCNL_ICR_THRES_EN (BIT(1)), which is a
   bitmask meant for the Control Register (VCNL_PS_ICR). In VCNL_ISR,
   BIT(1) corresponds only to low-threshold interrupts. A high-threshold
   interrupt (VCNL_INT_TH_HI, BIT(0)) on its own was completely ignored and
   returned IRQ_NONE.

2. Event direction & channel index: The handler unconditionally pushed a
   RISING event code on channel index 1. The driver only registers a single
   proximity channel (index 0), and low-threshold interrupts should be
   reported with IIO_EV_DIR_FALLING.

3. ISR clearing: The write-back to acknowledge the interrupt only preserved
   BIT(1) instead of masking against both valid status bits.

Fix this by checking both VCNL_INT_TH_HI and VCNL_INT_TH_LOW bits in
VCNL_ISR, pushing separate IIO events with the correct direction and
channel index (0), and properly clearing handled status bits.

Fixes: 3363fbbe19 ("iio: proximity: vcnl3020: add periodic mode")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
This commit is contained in:
Salah Triki 2026-08-24 05:29:07 +01:00 committed by Jonathan Cameron
parent e24328974a
commit 7d38af8f20

View File

@ -584,16 +584,26 @@ static irqreturn_t vcnl3020_handle_irq_thread(int irq, void *p)
return IRQ_HANDLED;
}
if (!(isr & VCNL_ICR_THRES_EN))
if (!(isr & (VCNL_INT_TH_HI | VCNL_INT_TH_LOW)))
return IRQ_NONE;
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_RISING),
iio_get_time_ns(indio_dev));
if (isr & VCNL_INT_TH_HI) {
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_RISING),
iio_get_time_ns(indio_dev));
}
rc = regmap_write(data->regmap, VCNL_ISR, isr & VCNL_ICR_THRES_EN);
if (isr & VCNL_INT_TH_LOW) {
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_FALLING),
iio_get_time_ns(indio_dev));
}
rc = regmap_write(data->regmap, VCNL_ISR, isr & (VCNL_INT_TH_HI | VCNL_INT_TH_LOW));
if (rc)
dev_err(data->dev, "Error (%d) writing in reg (0x%x)\n",
rc, VCNL_ISR);