github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-06-01 19:13:47 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

arm64: dts: ti: k3-am68-sk-base-board: Add bootph-all property to enable Ethernet boot

Browse Source 
Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to required nodes to enable Ethernet boot
on SK-AM68.

Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://lore.kernel.org/r/20250709105326.232608-2-c-vankar@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This commit is contained in:
Chintan Vankar 2025-07-09 16:23:23 +05:30 committed by Vignesh Raghavendra
parent 1544bca2f1
commit 7cc984fb30
1 changed files with 12 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
View File

@ -344,6 +344,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
>;
bootph-all;
};
mcu_mdio_pins_default: mcu-mdio-default-pins {
@ -351,6 +352,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins {
J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
>;
bootph-all;
};
mcu_mcan0_pins_default: mcu-mcan0-default-pins {
@ -412,6 +414,14 @@ J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */
};
};
&cpsw_mac_syscon {
bootph-all;
};
&phy_gmii_sel {
bootph-all;
};
&main_gpio0 {
status = "okay";
pinctrl-names = "default";
@ -626,6 +636,7 @@ &mcu_cpsw {
&davinci_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
bootph-all;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
@ -635,6 +646,7 @@ phy0: ethernet-phy@0 {
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
bootph-all;
};
&mcu_mcan0 {