diff --git a/drivers/power/sequencing/pwrseq-qcom-wcn.c b/drivers/power/sequencing/pwrseq-qcom-wcn.c
index d41793e1fcd9..34146d6372f3 100644
--- a/drivers/power/sequencing/pwrseq-qcom-wcn.c
+++ b/drivers/power/sequencing/pwrseq-qcom-wcn.c
@@ -496,15 +496,8 @@ static int pwrseq_qcom_wcn_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(ctx->bt_gpio),
 				     "Failed to get the Bluetooth enable GPIO\n");
 
-	/*
-	 * FIXME: This should actually be GPIOD_OUT_LOW, but doing so would
-	 * cause the WLAN power to be toggled, resulting in PCIe link down.
-	 * Since the PCIe controller driver is not handling link down currently,
-	 * the device becomes unusable. So we need to keep this workaround until
-	 * the link down handling is implemented in the controller driver.
-	 */
 	ctx->wlan_gpio = devm_gpiod_get_optional(dev, "wlan-enable",
-						 GPIOD_ASIS);
+						 GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->wlan_gpio))
 		return dev_err_probe(dev, PTR_ERR(ctx->wlan_gpio),
 				     "Failed to get the WLAN enable GPIO\n");
@@ -515,13 +508,6 @@ static int pwrseq_qcom_wcn_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(ctx->xo_clk_gpio),
 				     "Failed to get the XO_CLK GPIO\n");
 
-	/*
-	 * Set direction to output but keep the current value in order to not
-	 * disable the WLAN module accidentally if it's already powered on.
-	 */
-	gpiod_direction_output(ctx->wlan_gpio,
-			       gpiod_get_value_cansleep(ctx->wlan_gpio));
-
 	ctx->clk = devm_clk_get_optional(dev, NULL);
 	if (IS_ERR(ctx->clk))
 		return dev_err_probe(dev, PTR_ERR(ctx->clk),