From c264294624e956a967a9e2e5fa41e3273340b089 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 2 Nov 2025 11:07:56 +0100 Subject: [PATCH 1/3] net: dsa: b53: fix enabling ip multicast In the New Control register bit 1 is either reserved, or has a different function: Out of Range Error Discard When enabled, the ingress port discards any frames if the Length field is between 1500 and 1536 (excluding 1500 and 1536) and with good CRC. The actual bit for enabling IP multicast is bit 0, which was only explicitly enabled for BCM5325 so far. For older switch chips, this bit defaults to 0, so we want to enable it as well, while newer switch chips default to 1, and their documentation says "It is illegal to set this bit to zero." So drop the wrong B53_IPMC_FWD_EN define, enable the IP multicast bit also for other switch chips. While at it, rename it to (B53_)IP_MC as that is how it is called in Broadcom code. Fixes: 63cc54a6f073 ("net: dsa: b53: Fix egress flooding settings") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251102100758.28352-2-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/b53/b53_common.c | 4 ++-- drivers/net/dsa/b53/b53_regs.h | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index bb2c6dfa7835..58c31049c0e7 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -371,11 +371,11 @@ static void b53_set_forwarding(struct b53_device *dev, int enable) * frames should be flooded or not. */ b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); - mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN; + mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IP_MC; b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); } else { b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); - mgmt |= B53_IP_MCAST_25; + mgmt |= B53_IP_MC; b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); } } diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h index 309fe0e46dad..8ce1ce72e938 100644 --- a/drivers/net/dsa/b53/b53_regs.h +++ b/drivers/net/dsa/b53/b53_regs.h @@ -111,8 +111,7 @@ /* IP Multicast control (8 bit) */ #define B53_IP_MULTICAST_CTRL 0x21 -#define B53_IP_MCAST_25 BIT(0) -#define B53_IPMC_FWD_EN BIT(1) +#define B53_IP_MC BIT(0) #define B53_UC_FWD_EN BIT(6) #define B53_MC_FWD_EN BIT(7) From 0be04b5fa62a82a9929ca261f6c9f64a3d0a28da Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 2 Nov 2025 11:07:57 +0100 Subject: [PATCH 2/3] net: dsa: b53: stop reading ARL entries if search is done The switch clears the ARL_SRCH_STDN bit when the search is done, i.e. it finished traversing the ARL table. This means that there will be no valid result, so we should not attempt to read and process any further entries. We only ever check the validity of the entries for 4 ARL bin chips, and only after having passed the first entry to the b53_fdb_copy(). This means that we always pass an invalid entry at the end to the b53_fdb_copy(). b53_fdb_copy() does check the validity though before passing on the entry, so it never gets passed on. On < 4 ARL bin chips, we will even continue reading invalid entries until we reach the result limit. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251102100758.28352-3-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/b53/b53_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 58c31049c0e7..b467500699c7 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -2037,7 +2037,7 @@ static int b53_arl_search_wait(struct b53_device *dev) do { b53_read8(dev, B53_ARLIO_PAGE, offset, ®); if (!(reg & ARL_SRCH_STDN)) - return 0; + return -ENOENT; if (reg & ARL_SRCH_VLID) return 0; From e57723fe536f040cc2635ec1545dd0a7919a321e Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Sun, 2 Nov 2025 11:07:58 +0100 Subject: [PATCH 3/3] net: dsa: b53: properly bound ARL searches for < 4 ARL bin chips When iterating over the ARL table we stop at max ARL entries / 2, but this is only valid if the chip actually returns 2 results at once. For chips with only one result register we will stop before reaching the end of the table if it is more than half full. Fix this by only dividing the maximum results by two if we have a chip with more than one result register (i.e. those with 4 ARL bins). Fixes: cd169d799bee ("net: dsa: b53: Bound check ARL searches") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251102100758.28352-4-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/b53/b53_common.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index b467500699c7..eb767edc4c13 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -2087,13 +2087,16 @@ static int b53_fdb_copy(int port, const struct b53_arl_entry *ent, int b53_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb, void *data) { + unsigned int count = 0, results_per_hit = 1; struct b53_device *priv = ds->priv; struct b53_arl_entry results[2]; - unsigned int count = 0; u8 offset; int ret; u8 reg; + if (priv->num_arl_bins > 2) + results_per_hit = 2; + mutex_lock(&priv->arl_mutex); if (is5325(priv) || is5365(priv)) @@ -2115,7 +2118,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port, if (ret) break; - if (priv->num_arl_bins > 2) { + if (results_per_hit == 2) { b53_arl_search_rd(priv, 1, &results[1]); ret = b53_fdb_copy(port, &results[1], cb, data); if (ret) @@ -2125,7 +2128,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port, break; } - } while (count++ < b53_max_arl_entries(priv) / 2); + } while (count++ < b53_max_arl_entries(priv) / results_per_hit); mutex_unlock(&priv->arl_mutex);