diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index f4d109ef6798..dba641193144 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-ov5640.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-microtips-mf101hie-panel.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-tqma62xx-mba62xx.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-mezzanine-can.dtbo
@@ -255,6 +256,8 @@ k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
 k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
 	k3-am62x-sk-csi2-tevi-ov5640.dtbo
 k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am625-sk-microtips-mf101hie-panel-dtbs := k3-am625-sk.dtb \
+	k3-am625-sk-microtips-mf101hie-panel.dtbo
 k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \
 	k3-am625-verdin-wifi-dev.dtb \
 	k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
@@ -418,6 +421,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-ov5640.dtb \
 	k3-am625-sk-csi2-tevi-ov5640.dtb \
 	k3-am625-sk-hdmi-audio.dtb \
+	k3-am625-sk-microtips-mf101hie-panel.dtb \
 	k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb \
 	k3-am625-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch.dtb \
 	k3-am625-verdin-wifi-dev-mezzanine-can.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk-microtips-mf101hie-panel.dtso b/arch/arm64/boot/dts/ti/k3-am625-sk-microtips-mf101hie-panel.dtso
new file mode 100644
index 000000000000..ce7b31c5b9a6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk-microtips-mf101hie-panel.dtso
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/**
+ * Microtips integrated OLDI panel (MF-101HIEBCAF0) and touch DT overlay for AM625 - SK
+ *
+ * Copyright (C) 2026 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	display {
+		compatible = "microtips,mf-101hiebcaf0";
+		/*
+		* Note that the OLDI TX 0 transmits the odd set of pixels
+		* while the OLDI TX 1 transmits the even set. This is a
+		* fixed configuration in the IP integration and is not
+		* changeable. The properties, "dual-lvds-odd-pixels" and
+		* "dual-lvds-even-pixels" have been used to merely
+		* identify if a Dual Link configuration is required.
+		* Swapping them will cause an error in the dss oldi driver.
+		*/
+		power-supply = <&vcc_3v3_sys>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+				lcd_in0: endpoint {
+					remote-endpoint = <&oldi_0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+				lcd_in1: endpoint {
+					remote-endpoint = <&oldi_1_out>;
+				};
+			};
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&oldi0 {
+	status = "okay";
+	ti,companion-oldi = <&oldi1>;
+};
+
+&oldi1 {
+	status = "okay";
+	ti,secondary-oldi;
+	ti,companion-oldi = <&oldi0>;
+};
+
+&oldi0_port0 {
+	oldi_0_in: endpoint {
+		remote-endpoint = <&dpi0_out0>;
+	};
+};
+
+&oldi0_port1 {
+	oldi_0_out: endpoint {
+		remote-endpoint = <&lcd_in0>;
+	};
+};
+
+&oldi1_port0 {
+	oldi_1_in: endpoint {
+		remote-endpoint = <&dpi0_out1>;
+	};
+};
+
+&oldi1_port1 {
+	oldi_1_out: endpoint {
+		remote-endpoint = <&lcd_in1>;
+	};
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP1: Output to OLDI */
+	port@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dpi0_out0: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&oldi_0_in>;
+		};
+		dpi0_out1: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&oldi_1_in>;
+		};
+	};
+};
+
+&main_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&exp1>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+	};
+};