diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
index 411b58c1dddf..04738bf281eb 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -81,6 +81,11 @@ wl_on_reg: wl-on-reg {
 };
 
 &pinctrl {
+	bt_shutdown_default: bt-shutdown-default-state {
+		function = "gpio";
+		pins = "gpio29";
+	};
+
 	emmc_sd_default: emmc-sd-default-state {
 		pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
 		bias-pull-up;
@@ -110,6 +115,29 @@ dat-pins {
 		};
 	};
 
+	uarta_24_default: uarta-24-default-state {
+		rts-pins {
+			function = "uart0";
+			pins = "gpio24";
+			bias-disable;
+		};
+		cts-pins {
+			function = "uart0";
+			pins = "gpio25";
+			bias-pull-up;
+		};
+		txd-pins {
+			function = "uart0";
+			pins = "gpio26";
+			bias-disable;
+		};
+		rxd-pins {
+			function = "uart0";
+			pins = "gpio27";
+			bias-pull-up;
+		};
+	};
+
 	wl_on_default: wl-on-default-state {
 		function = "gpio";
 		pins = "gpio28";
@@ -188,6 +216,20 @@ power: power {
 	};
 };
 
+/* uarta communicates with the BT module */
+&uarta {
+	uart-has-rtscts;
+	pinctrl-0 = <&uarta_24_default &bt_shutdown_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &hvs {
 	clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
 	clock-names = "core", "disp";
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 6068cb75ef5a..e77a66adc22a 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -38,6 +38,13 @@ clk_emmc2: clk-emmc2 {
 			clock-frequency = <200000000>;
 			clock-output-names = "emmc2-clock";
 		};
+
+		clk_sw_baud: clk-sw-baud {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <96000000>;
+			clock-output-names = "sw-baud";
+		};
 	};
 
 	cpus: cpus {
@@ -260,6 +267,17 @@ gio: gpio@7d508500 {
 			brcm,gpio-bank-widths = <32 22>;
 		};
 
+		uarta: serial@7d50c000 {
+			compatible = "brcm,bcm7271-uart";
+			reg = <0x7d50c000 0x20>;
+			reg-names = "uart";
+			clocks = <&clk_sw_baud>;
+			clock-names = "sw_baud";
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart";
+			status = "disabled";
+		};
+
 		pinctrl_aon: pinctrl@7d510700 {
 			compatible = "brcm,bcm2712c0-aon-pinctrl";
 			reg = <0x7d510700 0x20>;