From 7108a3708c3310df62c95bea11065bcd7804ec37 Mon Sep 17 00:00:00 2001
From: Abel Vesa <abel.vesa@oss.qualcomm.com>
Date: Fri, 24 Jul 2026 11:23:54 +0300
Subject: [PATCH] arm64: dts: qcom: eliza-evk: Add support for USB and SD card

Even though the EVK comes with 3 Type-C ports, the Eliza EVK only has
one USB controller and a single set of PHYs, which are connected to
the port marked as JUSB.

Also, the EVK comes with an SD card slot.

So describe the PMIC GLINK node, the connector graph, the PHYs and repeater
supplies and enable the USB controller.

Also enable the second SD host controller, describe the card detect GPIO
and the board specific supplies.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260724-dts-qcom-eliza-cqs-evk-enable-usb-sdcard-v3-1-eadf9da69226@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---
 arch/arm64/boot/dts/qcom/eliza-evk.dtsi | 92 +++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/eliza-evk.dtsi b/arch/arm64/boot/dts/qcom/eliza-evk.dtsi
index e47b24f8b827..2fc945658300 100644
--- a/arch/arm64/boot/dts/qcom/eliza-evk.dtsi
+++ b/arch/arm64/boot/dts/qcom/eliza-evk.dtsi
@@ -11,6 +11,70 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	pmic-glink {
+		compatible = "qcom,eliza-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l7b>;
+	vdd3-supply = <&vreg_l17b>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l13b>;
+	vqmmc-supply = <&vreg_l23b>;
+
+	cd-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&sdc2_default>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_sleep>, <&sd_cd>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&tlmm {
+	sd_cd: sd-cd-state {
+		pins = "gpio58";
+		function = "gpio";
+		bias-pull-up;
+	};
 };
 
 &uart13 {
@@ -18,3 +82,31 @@ &uart13 {
 
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g>;
+	vdda-pll-supply = <&vreg_l7k>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l7k>;
+	vdda12-supply = <&vreg_l4b>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};