diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 21a1a63506f0..c3ebb3af8b52 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -106,10 +106,13 @@ properties:
       by software.
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
     description:
-      External clock connected to the PHY. If not specified it is assumed
-      that the PHY uses a fixed crystal or an internal oscillator.
+      External clock connected to the PHY or RX and TX clocks that the PHY
+      requires to enable explicitly. If not specified it is assumed
+      that the PHY uses a fixed crystal or an internal oscillator or that the
+      RX/TX clocks are hardware enabled by default.
 
   enet-phy-lane-swap:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
index 7ae5110e7aa2..53f648c4135f 100644
--- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -28,6 +28,16 @@ allOf:
         reg:
           const: 7  # This PHY is always at MDIO address 7 in the IPQ5018 SoC
 
+        clocks:
+          items:
+            - description: RX clock
+            - description: TX clock
+
+        clock-names:
+          items:
+            - const: rx
+            - const: tx
+
         resets:
           items:
             - description:
@@ -42,6 +52,11 @@ allOf:
             of this PHY are directly connected to an RJ45 connector.
           type: boolean
 
+      required:
+        - clocks
+        - clock-names
+        - resets
+
 properties:
   compatible:
     enum:
@@ -162,6 +177,7 @@ examples:
         };
     };
   - |
+    #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
     #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
 
     mdio {
@@ -172,6 +188,9 @@ examples:
             compatible = "ethernet-phy-id004d.d0c0";
             reg = <7>;
 
+            clocks = <&gcc GCC_GEPHY_RX_CLK>,
+                     <&gcc GCC_GEPHY_TX_CLK>;
+            clock-names = "rx", "tx";
             resets = <&gcc GCC_GEPHY_MISC_ARES>;
         };
     };
diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c
index 63726cf98cd4..ba4dc07752b6 100644
--- a/drivers/net/phy/qcom/at803x.c
+++ b/drivers/net/phy/qcom/at803x.c
@@ -19,6 +19,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
 #include <linux/phylink.h>
+#include <linux/clk.h>
 #include <linux/reset.h>
 #include <linux/phy_port.h>
 #include <dt-bindings/net/qca-ar803x.h>
@@ -1074,6 +1075,7 @@ static void ipq5018_link_change_notify(struct phy_device *phydev)
 static int ipq5018_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
+	struct clk *rx_clk, *tx_clk;
 	struct ipq5018_priv *priv;
 	int ret;
 
@@ -1084,6 +1086,16 @@ static int ipq5018_probe(struct phy_device *phydev)
 	priv->set_short_cable_dac = of_property_read_bool(dev->of_node,
 							  "qcom,dac-preset-short-cable");
 
+	rx_clk = devm_clk_get_enabled(dev, "rx");
+	if (IS_ERR(rx_clk))
+		return dev_err_probe(dev, PTR_ERR(rx_clk),
+				     "failed to get and enable RX clock\n");
+
+	tx_clk = devm_clk_get_enabled(dev, "tx");
+	if (IS_ERR(tx_clk))
+		return dev_err_probe(dev, PTR_ERR(tx_clk),
+				     "failed to get and enable TX clock\n");
+
 	priv->rst = devm_reset_control_array_get_exclusive(dev);
 	if (IS_ERR(priv->rst))
 		return dev_err_probe(dev, PTR_ERR(priv->rst),