mirror of
https://github.com/torvalds/linux.git
synced 2026-06-05 04:56:13 +02:00
arm64: dts: qcom: sm8750-qrd: Add sound (speakers, headset codec, dmics)
Add device nodes for most of the sound support - WSA884x smart speakers, WCD9395 audio codec (headset) and sound card - which allows sound playback via speakers and recording via AMIC microphones. Changes bring necessary foundation for headset playback/recording via USB, but that part is not yet ready. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250526-sm8750-audio-part-2-v3-3-74429c686bb1@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Krzysztof Kozlowski
Bjorn Andersson
parent
bd227f88fa
commit
6f018e1881
|
|
@ -28,6 +28,37 @@ aliases {
|
|||
serial0 = &uart7;
|
||||
};
|
||||
|
||||
wcd939x: audio-codec {
|
||||
compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
|
||||
|
||||
pinctrl-0 = <&wcd_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
qcom,micbias1-microvolt = <1800000>;
|
||||
qcom,micbias2-microvolt = <1800000>;
|
||||
qcom,micbias3-microvolt = <1800000>;
|
||||
qcom,micbias4-microvolt = <1800000>;
|
||||
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
|
||||
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
|
||||
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
|
||||
qcom,rx-device = <&wcd_rx>;
|
||||
qcom,tx-device = <&wcd_tx>;
|
||||
|
||||
reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vdd-buck-supply = <&vreg_l15b_1p8>;
|
||||
vdd-rxtx-supply = <&vreg_l15b_1p8>;
|
||||
vdd-io-supply = <&vreg_l15b_1p8>;
|
||||
vdd-mic-bias-supply = <&vreg_bob1>;
|
||||
/*
|
||||
* Mismatch with schematics - downstream DTS has L15B at 1.8 V,
|
||||
* schematics L2I at 1.2 V
|
||||
*/
|
||||
vdd-px-supply = <&vreg_l15b_1p8>;
|
||||
|
||||
#sound-dai-cells = <1>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
|
@ -80,6 +111,88 @@ key-volume-up {
|
|||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
|
||||
model = "SM8750-QRD";
|
||||
audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
|
||||
"SpkrRight IN", "WSA_SPK2 OUT",
|
||||
"IN1_HPHL", "HPHL_OUT",
|
||||
"IN2_HPHR", "HPHR_OUT",
|
||||
"AMIC1", "MIC BIAS1",
|
||||
"AMIC2", "MIC BIAS2",
|
||||
"AMIC3", "MIC BIAS3",
|
||||
"AMIC4", "MIC BIAS3",
|
||||
"AMIC5", "MIC BIAS4",
|
||||
"TX SWR_INPUT0", "ADC1_OUTPUT",
|
||||
"TX SWR_INPUT1", "ADC2_OUTPUT",
|
||||
"TX SWR_INPUT2", "ADC3_OUTPUT",
|
||||
"TX SWR_INPUT3", "ADC4_OUTPUT";
|
||||
|
||||
wcd-playback-dai-link {
|
||||
link-name = "WCD Playback";
|
||||
|
||||
codec {
|
||||
sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
|
||||
};
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
|
||||
};
|
||||
|
||||
platform {
|
||||
sound-dai = <&q6apm>;
|
||||
};
|
||||
};
|
||||
|
||||
wcd-capture-dai-link {
|
||||
link-name = "WCD Capture";
|
||||
|
||||
codec {
|
||||
sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
|
||||
};
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
|
||||
};
|
||||
|
||||
platform {
|
||||
sound-dai = <&q6apm>;
|
||||
};
|
||||
};
|
||||
|
||||
wsa-dai-link {
|
||||
link-name = "WSA Playback";
|
||||
|
||||
codec {
|
||||
sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
|
||||
};
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
|
||||
};
|
||||
|
||||
platform {
|
||||
sound-dai = <&q6apm>;
|
||||
};
|
||||
};
|
||||
|
||||
va-dai-link {
|
||||
link-name = "VA Capture";
|
||||
|
||||
codec {
|
||||
sound-dai = <&lpass_vamacro 0>;
|
||||
};
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
|
||||
};
|
||||
|
||||
platform {
|
||||
sound-dai = <&q6apm>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
|
|
@ -803,9 +916,121 @@ &remoteproc_mpss {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&swr0 {
|
||||
status = "okay";
|
||||
|
||||
/* WSA8845, Speaker North */
|
||||
north_spkr: speaker@0,0 {
|
||||
compatible = "sdw20217020400";
|
||||
reg = <0 0>;
|
||||
pinctrl-0 = <&spkr_0_sd_n_active>;
|
||||
pinctrl-names = "default";
|
||||
powerdown-gpios = <&tlmm 76 GPIO_ACTIVE_LOW>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SpkrLeft";
|
||||
vdd-1p8-supply = <&vreg_l15b_1p8>;
|
||||
vdd-io-supply = <&vreg_l2i_1p2>;
|
||||
|
||||
/*
|
||||
* WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L)
|
||||
* WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP)
|
||||
* WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST)
|
||||
* WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
|
||||
* WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
|
||||
* WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
|
||||
*/
|
||||
qcom,port-mapping = <1 2 3 7 10 13>;
|
||||
};
|
||||
|
||||
/* WSA8845, Speaker South */
|
||||
south_spkr: speaker@0,1 {
|
||||
compatible = "sdw20217020400";
|
||||
reg = <0 1>;
|
||||
pinctrl-0 = <&spkr_1_sd_n_active>;
|
||||
pinctrl-names = "default";
|
||||
powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
|
||||
#sound-dai-cells = <0>;
|
||||
sound-name-prefix = "SpkrRight";
|
||||
vdd-1p8-supply = <&vreg_l15b_1p8>;
|
||||
vdd-io-supply = <&vreg_l2i_1p2>;
|
||||
|
||||
/*
|
||||
* WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R)
|
||||
* WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP)
|
||||
* WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST)
|
||||
* WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
|
||||
* WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
|
||||
* WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
|
||||
*/
|
||||
qcom,port-mapping = <4 5 6 7 11 13>;
|
||||
};
|
||||
};
|
||||
|
||||
&swr1 {
|
||||
status = "okay";
|
||||
|
||||
/* WCD9395 RX */
|
||||
wcd_rx: codec@0,4 {
|
||||
compatible = "sdw20217010e00";
|
||||
reg = <0 4>;
|
||||
|
||||
/*
|
||||
* WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
|
||||
* WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
|
||||
* WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
|
||||
* WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
|
||||
* WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
|
||||
* WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
|
||||
*/
|
||||
qcom,rx-port-mapping = <1 2 3 4 5 9>;
|
||||
};
|
||||
};
|
||||
|
||||
&swr2 {
|
||||
status = "okay";
|
||||
|
||||
/* WCD9395 TX */
|
||||
wcd_tx: codec@0,3 {
|
||||
compatible = "sdw20217010e00";
|
||||
reg = <0 3>;
|
||||
|
||||
/*
|
||||
* WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
|
||||
* WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
|
||||
* WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
|
||||
* WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
|
||||
*/
|
||||
qcom,tx-port-mapping = <2 2 3 4>;
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
/* reserved for secure world */
|
||||
gpio-reserved-ranges = <36 4>, <74 1>;
|
||||
|
||||
spkr_0_sd_n_active: spkr-0-sd-n-active-state {
|
||||
pins = "gpio76";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
|
||||
pins = "gpio77";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
wcd_default: wcd-reset-n-active-state {
|
||||
pins = "gpio101";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user