From 0482a4e6de19bcfc3729dcc13b7b6dde03375bdb Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sun, 3 Jan 2021 04:00:04 -0600 Subject: [PATCH 1/9] clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset While no information about the H6 RSB controller is included in the datasheet or manual, the vendor BSP and power management blob both reference the RSB clock parent and register address. These values were verified by experimentation. Since this clock/reset are added late, the specifier is added at the end to maintain the existing DT binding. The code is kept in register order. Signed-off-by: Samuel Holland Acked-by: Maxime Ripard Signed-off-by: Chen-Yu Tsai --- drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 5 +++++ drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h | 2 +- include/dt-bindings/clock/sun50i-h6-r-ccu.h | 2 ++ include/dt-bindings/reset/sun50i-h6-r-ccu.h | 1 + 4 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c index 50f8d1bc7046..56e351b513f3 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c @@ -91,6 +91,8 @@ static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2", 0x18c, BIT(0), 0); static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2", 0x19c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb2_rsb_clk, "r-apb2-rsb", "r-apb2", + 0x1bc, BIT(0), 0); static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1", 0x1cc, BIT(0), 0); static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1", @@ -130,6 +132,7 @@ static struct ccu_common *sun50i_h6_r_ccu_clks[] = { &r_apb1_pwm_clk.common, &r_apb2_uart_clk.common, &r_apb2_i2c_clk.common, + &r_apb2_rsb_clk.common, &r_apb1_ir_clk.common, &r_apb1_w1_clk.common, &ir_clk.common, @@ -147,6 +150,7 @@ static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { [CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw, [CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw, [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, + [CLK_R_APB2_RSB] = &r_apb2_rsb_clk.common.hw, [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, [CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw, [CLK_IR] = &ir_clk.common.hw, @@ -161,6 +165,7 @@ static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { [RST_R_APB1_PWM] = { 0x13c, BIT(16) }, [RST_R_APB2_UART] = { 0x18c, BIT(16) }, [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, + [RST_R_APB2_RSB] = { 0x1bc, BIT(16) }, [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, [RST_R_APB1_W1] = { 0x1ec, BIT(16) }, }; diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h index 782117dc0b28..7e290b840803 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h @@ -14,6 +14,6 @@ #define CLK_R_APB2 3 -#define CLK_NUMBER (CLK_W1 + 1) +#define CLK_NUMBER (CLK_R_APB2_RSB + 1) #endif /* _CCU_SUN50I_H6_R_H */ diff --git a/include/dt-bindings/clock/sun50i-h6-r-ccu.h b/include/dt-bindings/clock/sun50i-h6-r-ccu.h index 76136132a13e..890368d252c4 100644 --- a/include/dt-bindings/clock/sun50i-h6-r-ccu.h +++ b/include/dt-bindings/clock/sun50i-h6-r-ccu.h @@ -21,4 +21,6 @@ #define CLK_IR 11 #define CLK_W1 12 +#define CLK_R_APB2_RSB 13 + #endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */ diff --git a/include/dt-bindings/reset/sun50i-h6-r-ccu.h b/include/dt-bindings/reset/sun50i-h6-r-ccu.h index 01c84dba49a4..7950e799c76d 100644 --- a/include/dt-bindings/reset/sun50i-h6-r-ccu.h +++ b/include/dt-bindings/reset/sun50i-h6-r-ccu.h @@ -13,5 +13,6 @@ #define RST_R_APB2_I2C 4 #define RST_R_APB1_IR 5 #define RST_R_APB1_W1 6 +#define RST_R_APB2_RSB 7 #endif /* _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_ */ From 756650820abd4770c4200763505b634a3c04e05e Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Wed, 6 Jan 2021 14:32:46 +0000 Subject: [PATCH 2/9] clk: sunxi-ng: h6: Fix CEC clock The CEC clock on the H6 SoC is a bit special, since it uses a fixed pre-dividier for one source clock (the PLL), but conveys the other clock (32K OSC) directly. We are using a fixed predivider array for that, but fail to use the right flag to actually activate that. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Reported-by: Jernej Skrabec Signed-off-by: Andre Przywara Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210106143246.11255-1-andre.przywara@arm.com --- drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c index f2497d0a4683..a26dbbdff80d 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c @@ -682,7 +682,7 @@ static struct ccu_mux hdmi_cec_clk = { .common = { .reg = 0xb10, - .features = CCU_FEATURE_VARIABLE_PREDIV, + .features = CCU_FEATURE_FIXED_PREDIV, .hw.init = CLK_HW_INIT_PARENTS("hdmi-cec", hdmi_cec_parents, &ccu_mux_ops, From 58fdf74d43f49da11073232d7408097b43c79a76 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 20 Jan 2021 09:30:34 +0000 Subject: [PATCH 3/9] clk: sunxi: clk-sunxi: Demote a bunch of non-conformant kernel-doc headers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following W=1 kernel build warning(s): drivers/clk/sunxi/clk-sunxi.c:34: warning: Function parameter or member 'req' not described in 'sun4i_get_pll1_factors' drivers/clk/sunxi/clk-sunxi.c:81: warning: Function parameter or member 'req' not described in 'sun6i_a31_get_pll1_factors' drivers/clk/sunxi/clk-sunxi.c:158: warning: Function parameter or member 'req' not described in 'sun8i_a23_get_pll1_factors' drivers/clk/sunxi/clk-sunxi.c:202: warning: Function parameter or member 'req' not described in 'sun4i_get_pll5_factors' drivers/clk/sunxi/clk-sunxi.c:229: warning: Function parameter or member 'req' not described in 'sun6i_a31_get_pll6_factors' drivers/clk/sunxi/clk-sunxi.c:250: warning: Function parameter or member 'req' not described in 'sun5i_a13_get_ahb_factors' drivers/clk/sunxi/clk-sunxi.c:289: warning: Function parameter or member 'req' not described in 'sun6i_get_ahb1_factors' drivers/clk/sunxi/clk-sunxi.c:328: warning: Function parameter or member 'req' not described in 'sun6i_ahb1_recalc' drivers/clk/sunxi/clk-sunxi.c:346: warning: Function parameter or member 'req' not described in 'sun4i_get_apb1_factors' drivers/clk/sunxi/clk-sunxi.c:385: warning: Function parameter or member 'req' not described in 'sun7i_a20_get_out_factors' drivers/clk/sunxi/clk-sunxi.c:415: warning: cannot understand function prototype: 'const struct clk_factors_config sun4i_pll1_config = ' drivers/clk/sunxi/clk-sunxi.c:724: warning: cannot understand function prototype: 'struct div_data ' drivers/clk/sunxi/clk-sunxi.c:945: warning: Function parameter or member 'node' not described in 'sunxi_divs_clk_setup' drivers/clk/sunxi/clk-sunxi.c:945: warning: Function parameter or member 'data' not described in 'sunxi_divs_clk_setup' Cc: "Emilio López" Cc: Michael Turquette Cc: Stephen Boyd Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Jernej Skrabec Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210120093040.1719407-15-lee.jones@linaro.org --- drivers/clk/sunxi/clk-sunxi.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index e1aa1fbac48a..5fe7049ea693 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -23,7 +23,7 @@ static DEFINE_SPINLOCK(clk_lock); /* Maximum number of parents our clocks have */ #define SUNXI_MAX_PARENTS 5 -/** +/* * sun4i_get_pll1_factors() - calculates n, k, m, p factors for PLL1 * PLL1 rate is calculated as follows * rate = (parent_rate * n * (k + 1) >> p) / (m + 1); @@ -71,7 +71,7 @@ static void sun4i_get_pll1_factors(struct factors_request *req) req->n = div / 4; } -/** +/* * sun6i_a31_get_pll1_factors() - calculates n, k and m factors for PLL1 * PLL1 rate is calculated as follows * rate = parent_rate * (n + 1) * (k + 1) / (m + 1); @@ -147,7 +147,7 @@ static void sun6i_a31_get_pll1_factors(struct factors_request *req) } } -/** +/* * sun8i_a23_get_pll1_factors() - calculates n, k, m, p factors for PLL1 * PLL1 rate is calculated as follows * rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1); @@ -191,7 +191,7 @@ static void sun8i_a23_get_pll1_factors(struct factors_request *req) req->n = div / 4 - 1; } -/** +/* * sun4i_get_pll5_factors() - calculates n, k factors for PLL5 * PLL5 rate is calculated as follows * rate = parent_rate * n * (k + 1) @@ -218,7 +218,7 @@ static void sun4i_get_pll5_factors(struct factors_request *req) req->n = DIV_ROUND_UP(div, (req->k + 1)); } -/** +/* * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6x2 * PLL6x2 rate is calculated as follows * rate = parent_rate * (n + 1) * (k + 1) @@ -240,7 +240,7 @@ static void sun6i_a31_get_pll6_factors(struct factors_request *req) req->n = DIV_ROUND_UP(div, (req->k + 1)) - 1; } -/** +/* * sun5i_a13_get_ahb_factors() - calculates m, p factors for AHB * AHB rate is calculated as follows * rate = parent_rate >> p @@ -276,7 +276,7 @@ static void sun5i_a13_get_ahb_factors(struct factors_request *req) #define SUN6I_AHB1_PARENT_PLL6 3 -/** +/* * sun6i_a31_get_ahb_factors() - calculates m, p factors for AHB * AHB rate is calculated as follows * rate = parent_rate >> p @@ -320,7 +320,7 @@ static void sun6i_get_ahb1_factors(struct factors_request *req) req->m = calcm - 1; } -/** +/* * sun6i_ahb1_recalc() - calculates AHB clock rate from m, p factors and * parent index */ @@ -336,7 +336,7 @@ static void sun6i_ahb1_recalc(struct factors_request *req) req->rate >>= req->p; } -/** +/* * sun4i_get_apb1_factors() - calculates m, p factors for APB1 * APB1 rate is calculated as follows * rate = (parent_rate >> p) / (m + 1); @@ -375,7 +375,7 @@ static void sun4i_get_apb1_factors(struct factors_request *req) -/** +/* * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B * CLK_OUT rate is calculated as follows * rate = (parent_rate >> p) / (m + 1); @@ -408,7 +408,7 @@ static void sun7i_a20_get_out_factors(struct factors_request *req) req->p = calcp; } -/** +/* * sunxi_factors_clk_setup() - Setup function for factor clocks */ @@ -625,7 +625,7 @@ CLK_OF_DECLARE(sun7i_out, "allwinner,sun7i-a20-out-clk", sun7i_out_clk_setup); -/** +/* * sunxi_mux_clk_setup() - Setup function for muxes */ @@ -717,7 +717,7 @@ CLK_OF_DECLARE(sun8i_ahb2, "allwinner,sun8i-h3-ahb2-clk", sun8i_ahb2_clk_setup); -/** +/* * sunxi_divider_clk_setup() - Setup function for simple divider clocks */ @@ -853,7 +853,7 @@ CLK_OF_DECLARE(sun8i_axi, "allwinner,sun8i-a23-axi-clk", -/** +/* * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks */ @@ -863,7 +863,7 @@ struct gates_data { DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE); }; -/** +/* * sunxi_divs_clk_setup() helper data */ @@ -929,7 +929,7 @@ static const struct divs_data sun6i_a31_pll6_divs_data __initconst = { } }; -/** +/* * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks * * These clocks look something like this From 29f476d443d6eb37568894ec0bea87d6080fc82f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 20 Jan 2021 09:30:37 +0000 Subject: [PATCH 4/9] clk: sunxi: clk-a10-ve: Demote obvious kernel-doc abuse MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following W=1 kernel build warning(s): drivers/clk/sunxi/clk-a10-ve.c:27: warning: cannot understand function prototype: 'struct ve_reset_data ' Cc: "Emilio López" Cc: Michael Turquette Cc: Stephen Boyd Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Jernej Skrabec Cc: Philipp Zabel Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210120093040.1719407-18-lee.jones@linaro.org --- drivers/clk/sunxi/clk-a10-ve.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi/clk-a10-ve.c b/drivers/clk/sunxi/clk-a10-ve.c index cb5daa4b37db..65810937a13a 100644 --- a/drivers/clk/sunxi/clk-a10-ve.c +++ b/drivers/clk/sunxi/clk-a10-ve.c @@ -20,7 +20,7 @@ static DEFINE_SPINLOCK(ve_lock); #define SUN4I_VE_DIVIDER_WIDTH 3 #define SUN4I_VE_RESET 0 -/** +/* * sunxi_ve_reset... - reset bit in ve clk registers handling */ From eec9d9b7b09a9f14654341899195fb687c18eff7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 20 Jan 2021 09:30:38 +0000 Subject: [PATCH 5/9] clk: sunxi: clk-mod0: Demote non-conformant kernel-doc header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following W=1 kernel build warning(s): drivers/clk/sunxi/clk-mod0.c:24: warning: Function parameter or member 'req' not described in 'sun4i_a10_get_mod0_factors' Cc: "Emilio López" Cc: Michael Turquette Cc: Stephen Boyd Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Jernej Skrabec Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210120093040.1719407-19-lee.jones@linaro.org --- drivers/clk/sunxi/clk-mod0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c index 0cca91e075a5..f9d715ec9908 100644 --- a/drivers/clk/sunxi/clk-mod0.c +++ b/drivers/clk/sunxi/clk-mod0.c @@ -14,7 +14,7 @@ #include "clk-factors.h" -/** +/* * sun4i_a10_get_mod0_factors() - calculates m, n factors for MOD0-style clocks * MOD0 rate is calculated as follows * rate = (parent_rate >> p) / (m + 1); From 04ef679591c76571a9e7d5ca48316cc86fa0ef12 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Mon, 18 Jan 2021 00:09:12 +0000 Subject: [PATCH 6/9] clk: sunxi-ng: h6: Fix clock divider range on some clocks While comparing clocks between the H6 and H616, some of the M factor ranges were found to be wrong: the manual says they are only covering two bits [1:0], but our code had "5" in the number-of-bits field. By writing 0xff into that register in U-Boot and via FEL, it could be confirmed that bits [4:2] are indeed masked off, so the manual is right. Change to number of bits in the affected clock's description. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210118000912.28116-1-andre.przywara@arm.com --- drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c index a26dbbdff80d..bff446b78290 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c @@ -237,7 +237,7 @@ static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k", static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2", psi_ahb1_ahb2_parents, 0x510, - 0, 5, /* M */ + 0, 2, /* M */ 8, 2, /* P */ 24, 2, /* mux */ 0); @@ -246,19 +246,19 @@ static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k", "psi-ahb1-ahb2", "pll-periph0" }; static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c, - 0, 5, /* M */ + 0, 2, /* M */ 8, 2, /* P */ 24, 2, /* mux */ 0); static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520, - 0, 5, /* M */ + 0, 2, /* M */ 8, 2, /* P */ 24, 2, /* mux */ 0); static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524, - 0, 5, /* M */ + 0, 2, /* M */ 8, 2, /* P */ 24, 2, /* mux */ 0); From f8d0e2bae6315343faadba647fc2e8ac995b8ecf Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Wed, 27 Jan 2021 17:24:41 +0000 Subject: [PATCH 7/9] dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner H616 Signed-off-by: Andre Przywara Acked-by: Rob Herring Acked-by: Maxime Ripard Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210127172500.13356-2-andre.przywara@arm.com --- .../devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml index 3b45344ed758..a27025cd3909 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -41,6 +41,8 @@ properties: - allwinner,sun50i-h5-ccu - allwinner,sun50i-h6-ccu - allwinner,sun50i-h6-r-ccu + - allwinner,sun50i-h616-ccu + - allwinner,sun50i-h616-r-ccu - allwinner,suniv-f1c100s-ccu - nextthing,gr8-ccu @@ -82,6 +84,7 @@ if: - allwinner,sun50i-a64-r-ccu - allwinner,sun50i-a100-r-ccu - allwinner,sun50i-h6-r-ccu + - allwinner,sun50i-h616-r-ccu then: properties: @@ -100,6 +103,7 @@ else: enum: - allwinner,sun50i-a100-ccu - allwinner,sun50i-h6-ccu + - allwinner,sun50i-h616-ccu then: properties: From 394a36dd9dec7fd48b75dab23432632a30f241ea Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Wed, 27 Jan 2021 17:24:42 +0000 Subject: [PATCH 8/9] clk: sunxi-ng: Add support for the Allwinner H616 R-CCU The clocks itself are identical to the H6 R-CCU, it's just that the H616 has not all of them implemented (or connected). Signed-off-by: Andre Przywara Acked-by: Maxime Ripard Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210127172500.13356-3-andre.przywara@arm.com --- drivers/clk/sunxi-ng/Kconfig | 2 +- drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 48 ++++++++++++++++++++++++++ 2 files changed, 49 insertions(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index ce5f5847d5d3..feeb8d2074ee 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -33,7 +33,7 @@ config SUN50I_H6_CCU depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST config SUN50I_H6_R_CCU - bool "Support for the Allwinner H6 PRCM CCU" + bool "Support for the Allwinner H6 and H616 PRCM CCU" default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c index 56e351b513f3..f8909a7ed553 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c @@ -139,6 +139,16 @@ static struct ccu_common *sun50i_h6_r_ccu_clks[] = { &w1_clk.common, }; +static struct ccu_common *sun50i_h616_r_ccu_clks[] = { + &r_apb1_clk.common, + &r_apb2_clk.common, + &r_apb1_twd_clk.common, + &r_apb2_i2c_clk.common, + &r_apb2_rsb_clk.common, + &r_apb1_ir_clk.common, + &ir_clk.common, +}; + static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { .hws = { [CLK_AR100] = &ar100_clk.common.hw, @@ -159,6 +169,20 @@ static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { .num = CLK_NUMBER, }; +static struct clk_hw_onecell_data sun50i_h616_r_hw_clks = { + .hws = { + [CLK_R_AHB] = &r_ahb_clk.hw, + [CLK_R_APB1] = &r_apb1_clk.common.hw, + [CLK_R_APB2] = &r_apb2_clk.common.hw, + [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, + [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, + [CLK_R_APB2_RSB] = &r_apb2_rsb_clk.common.hw, + [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, + [CLK_IR] = &ir_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { [RST_R_APB1_TIMER] = { 0x11c, BIT(16) }, [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, @@ -170,6 +194,13 @@ static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { [RST_R_APB1_W1] = { 0x1ec, BIT(16) }, }; +static struct ccu_reset_map sun50i_h616_r_ccu_resets[] = { + [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, + [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, + [RST_R_APB2_RSB] = { 0x1bc, BIT(16) }, + [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, +}; + static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = { .ccu_clks = sun50i_h6_r_ccu_clks, .num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks), @@ -180,6 +211,16 @@ static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = { .num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets), }; +static const struct sunxi_ccu_desc sun50i_h616_r_ccu_desc = { + .ccu_clks = sun50i_h616_r_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_h616_r_ccu_clks), + + .hw_clks = &sun50i_h616_r_hw_clks, + + .resets = sun50i_h616_r_ccu_resets, + .num_resets = ARRAY_SIZE(sun50i_h616_r_ccu_resets), +}; + static void __init sunxi_r_ccu_init(struct device_node *node, const struct sunxi_ccu_desc *desc) { @@ -200,3 +241,10 @@ static void __init sun50i_h6_r_ccu_setup(struct device_node *node) } CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu", sun50i_h6_r_ccu_setup); + +static void __init sun50i_h616_r_ccu_setup(struct device_node *node) +{ + sunxi_r_ccu_init(node, &sun50i_h616_r_ccu_desc); +} +CLK_OF_DECLARE(sun50i_h616_r_ccu, "allwinner,sun50i-h616-r-ccu", + sun50i_h616_r_ccu_setup); From 88dde5e23da1a16fe9a417171e6c941736b8d3a6 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Wed, 27 Jan 2021 17:24:43 +0000 Subject: [PATCH 9/9] clk: sunxi-ng: Add support for the Allwinner H616 CCU While the clocks are fairly similar to the H6, many differ in tiny details, so a separate clock driver seems indicated. Derived from the H6 clock driver, and adjusted according to the manual. Signed-off-by: Andre Przywara Acked-by: Maxime Ripard Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210127172500.13356-4-andre.przywara@arm.com --- drivers/clk/sunxi-ng/Kconfig | 5 + drivers/clk/sunxi-ng/Makefile | 1 + drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 1150 +++++++++++++++++++ drivers/clk/sunxi-ng/ccu-sun50i-h616.h | 56 + include/dt-bindings/clock/sun50i-h616-ccu.h | 115 ++ include/dt-bindings/reset/sun50i-h616-ccu.h | 70 ++ 6 files changed, 1397 insertions(+) create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.h create mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index feeb8d2074ee..cd46d8853876 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -32,6 +32,11 @@ config SUN50I_H6_CCU default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST +config SUN50I_H616_CCU + bool "Support for the Allwinner H616 CCU" + default ARM64 && ARCH_SUNXI + depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST + config SUN50I_H6_R_CCU bool "Support for the Allwinner H6 and H616 PRCM CCU" default ARM64 && ARCH_SUNXI diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 3eb5cff40eac..96c324306d97 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o obj-$(CONFIG_SUN50I_A100_CCU) += ccu-sun50i-a100.o obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-sun50i-a100-r.o obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o +obj-$(CONFIG_SUN50I_H616_CCU) += ccu-sun50i-h616.o obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c new file mode 100644 index 000000000000..225307305880 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c @@ -0,0 +1,1150 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Arm Ltd. + * Based on the H6 CCU driver, which is: + * Copyright (c) 2017 Icenowy Zheng + */ + +#include +#include +#include +#include + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_mult.h" +#include "ccu_nk.h" +#include "ccu_nkm.h" +#include "ccu_nkmp.h" +#include "ccu_nm.h" + +#include "ccu-sun50i-h616.h" + +/* + * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However + * P should only be used for output frequencies lower than 288 MHz. + * + * For now we can just model it as a multiplier clock, and force P to /1. + * + * The M factor is present in the register's description, but not in the + * frequency formula, and it's documented as "M is only used for backdoor + * testing", so it's not modelled and then force to 0. + */ +#define SUN50I_H616_PLL_CPUX_REG 0x000 +static struct ccu_mult pll_cpux_clk = { + .enable = BIT(31), + .lock = BIT(28), + .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .common = { + .reg = 0x000, + .hw.init = CLK_HW_INIT("pll-cpux", "osc24M", + &ccu_mult_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */ +#define SUN50I_H616_PLL_DDR0_REG 0x010 +static struct ccu_nkmp pll_ddr0_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x010, + .hw.init = CLK_HW_INIT("pll-ddr0", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_DDR1_REG 0x018 +static struct ccu_nkmp pll_ddr1_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x018, + .hw.init = CLK_HW_INIT("pll-ddr1", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_PERIPH0_REG 0x020 +static struct ccu_nkmp pll_periph0_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .fixed_post_div = 2, + .common = { + .reg = 0x020, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-periph0", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_PERIPH1_REG 0x028 +static struct ccu_nkmp pll_periph1_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .fixed_post_div = 2, + .common = { + .reg = 0x028, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-periph1", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_GPU_REG 0x030 +static struct ccu_nkmp pll_gpu_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x030, + .hw.init = CLK_HW_INIT("pll-gpu", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* + * For Video PLLs, the output divider is described as "used for testing" + * in the user manual. So it's not modelled and forced to 0. + */ +#define SUN50I_H616_PLL_VIDEO0_REG 0x040 +static struct ccu_nm pll_video0_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .min_rate = 288000000, + .max_rate = 2400000000UL, + .common = { + .reg = 0x040, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video0", "osc24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_VIDEO1_REG 0x048 +static struct ccu_nm pll_video1_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .min_rate = 288000000, + .max_rate = 2400000000UL, + .common = { + .reg = 0x048, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video1", "osc24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_VIDEO2_REG 0x050 +static struct ccu_nm pll_video2_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .min_rate = 288000000, + .max_rate = 2400000000UL, + .common = { + .reg = 0x050, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video2", "osc24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_VE_REG 0x058 +static struct ccu_nkmp pll_ve_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x058, + .hw.init = CLK_HW_INIT("pll-ve", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_H616_PLL_DE_REG 0x060 +static struct ccu_nkmp pll_de_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x060, + .hw.init = CLK_HW_INIT("pll-de", "osc24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* + * TODO: Determine SDM settings for the audio PLL. The manual suggests + * PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2, pattern=0xe000c49b + * for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3, OUTPUT_DIV=2, + * pattern=0xe001288c for 22.5792 MHz. + * This clashes with our fixed PLL_POST_DIV_P. + */ +#define SUN50I_H616_PLL_AUDIO_REG 0x078 +static struct ccu_nm pll_audio_hs_clk = { + .enable = BIT(31), + .lock = BIT(28), + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .common = { + .reg = 0x078, + .hw.init = CLK_HW_INIT("pll-audio-hs", "osc24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +static const char * const cpux_parents[] = { "osc24M", "osc32k", + "iosc", "pll-cpux", "pll-periph0" }; +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents, + 0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL); +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0); +static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0); + +static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k", + "iosc", "pll-periph0" }; +static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2", + psi_ahb1_ahb2_parents, + 0x510, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + 0); + +static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k", + "psi-ahb1-ahb2", + "pll-periph0" }; +static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + 0); + +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + 0); + +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + 0); + +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", + "pll-ddr0", "pll-ddr1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540, + 0, 3, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + CLK_IS_CRITICAL); + +static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" }; +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600, + 0, 4, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2", + 0x60c, BIT(0), 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", + de_parents, + 0x620, + 0, 4, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2", + 0x62c, BIT(0), 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d", de_parents, 0x630, + 0, 4, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2", + 0x63c, BIT(0), 0); + +static const char * const gpu0_parents[] = { "pll-gpu", "gpu1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(gpu0_clk, "gpu0", gpu0_parents, 0x670, + 0, 2, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); +static SUNXI_CCU_M_WITH_GATE(gpu1_clk, "gpu1", "pll-periph0-2x", 0x674, + 0, 2, /* M */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2", + 0x67c, BIT(0), 0); + +static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 1, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2", + 0x68c, BIT(0), 0); + +static const char * const ve_parents[] = { "pll-ve" }; +static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690, + 0, 3, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2", + 0x69c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2", + 0x70c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2", + 0x73c, BIT(0), 0); + +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0); + +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2", + 0x78c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2", + 0x79c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0); + +static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" }; +static struct ccu_div dram_clk = { + .div = _SUNXI_CCU_DIV(0, 2), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0x800, + .hw.init = CLK_HW_INIT_PARENTS("dram", + dram_parents, + &ccu_div_ops, + CLK_IS_CRITICAL), + }, +}; + +static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus", + 0x804, BIT(0), 0); +static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus", + 0x804, BIT(1), 0); +static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus", + 0x804, BIT(2), 0); +static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus", + 0x804, BIT(3), 0); +static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus", + 0x804, BIT(5), 0); +static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus", + 0x804, BIT(10), 0); + +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2", + 0x80c, BIT(0), CLK_IS_CRITICAL); + +static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0", + "pll-periph1", "pll-periph0-2x", + "pll-periph1-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 3, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 3, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0); + +static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x", + "pll-periph1-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + 0); + +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0); + +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0); +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0); +static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2", 0x90c, BIT(5), 0); + +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0); +static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2", 0x91c, BIT(4), 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 3, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 3, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0); + +static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970, + BIT(31) | BIT(30), 0); + +static SUNXI_CCU_GATE(bus_emac0_clk, "bus-emac0", "ahb3", 0x97c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_emac1_clk, "bus-emac1", "ahb3", 0x97c, BIT(1), 0); + +static const char * const ts_parents[] = { "osc24M", "pll-periph0" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0, + 0, 4, /* M */ + 8, 2, /* N */ + 24, 1, /* mux */ + BIT(31),/* gate */ + 0); + +static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0); + +static const char * const audio_parents[] = { "pll-audio-1x", "pll-audio-2x", + "pll-audio-4x", "pll-audio-hs" }; +static struct ccu_div spdif_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa20, + .hw.init = CLK_HW_INIT_PARENTS("spdif", + audio_parents, + &ccu_div_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0); + +static struct ccu_div dmic_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa40, + .hw.init = CLK_HW_INIT_PARENTS("dmic", + audio_parents, + &ccu_div_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_1x_clk, "audio-codec-1x", + audio_parents, 0xa50, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x", + audio_parents, 0xa54, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c, + BIT(0), 0); + +static struct ccu_div audio_hub_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa60, + .hw.init = CLK_HW_INIT_PARENTS("audio-hub", + audio_parents, + &ccu_div_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0); + +/* + * There are OHCI 12M clock source selection bits for the four USB 2.0 ports. + * We will force them to 0 (12M divided from 48M). + */ +#define SUN50I_H616_USB0_CLK_REG 0xa70 +#define SUN50I_H616_USB1_CLK_REG 0xa74 +#define SUN50I_H616_USB2_CLK_REG 0xa78 +#define SUN50I_H616_USB3_CLK_REG 0xa7c + +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0); + +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0); + +static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc12M", 0xa78, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M", 0xa78, BIT(29), 0); + +static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc24M", 0xa7c, BIT(29), 0); + +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb3", 0xa8c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0); +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0); +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0); +static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb3", 0xa8c, BIT(6), 0); +static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0); +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0); + +static SUNXI_CCU_GATE(bus_keyadc_clk, "bus-keyadc", "apb1", 0xa9c, BIT(0), 0); + +static const char * const hdmi_parents[] = { "pll-video0", "pll-video0-4x", + "pll-video2", "pll-video2-4x" }; +static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04, BIT(31), 0); + +static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" }; +static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = { + { .index = 1, .div = 36621 }, +}; + +#define SUN50I_H616_HDMI_CEC_CLK_REG 0xb10 +static struct ccu_mux hdmi_cec_clk = { + .enable = BIT(31) | BIT(30), + + .mux = { + .shift = 24, + .width = 2, + + .fixed_predivs = hdmi_cec_predivs, + .n_predivs = ARRAY_SIZE(hdmi_cec_predivs), + }, + + .common = { + .reg = 0xb10, + .features = CCU_FEATURE_FIXED_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("hdmi-cec", + hdmi_cec_parents, + &ccu_mux_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3", + 0xb5c, BIT(0), 0); + +static const char * const tcon_tv_parents[] = { "pll-video0", + "pll-video0-4x", + "pll-video1", + "pll-video1-4x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0", + tcon_tv_parents, 0xb80, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); +static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv1_clk, "tcon-tv1", + tcon_tv_parents, 0xb84, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3", + 0xb9c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_tcon_tv1_clk, "bus-tcon-tv1", "ahb3", + 0xb9c, BIT(1), 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(tve0_clk, "tve0", + tcon_tv_parents, 0xbb0, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb3", + 0xbbc, BIT(0), 0); +static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb3", + 0xbbc, BIT(1), 0); + +static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0); + +/* Fixed factor clocks */ +static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0); + +static const struct clk_hw *clk_parent_pll_audio[] = { + &pll_audio_hs_clk.common.hw +}; + +/* + * The divider of pll-audio is fixed to 24 for now, so 24576000 and 22579200 + * rates can be set exactly in conjunction with sigma-delta modulation. + */ +static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x", + clk_parent_pll_audio, + 96, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x", + clk_parent_pll_audio, + 48, 1, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x", + clk_parent_pll_audio, + 24, 1, CLK_SET_RATE_PARENT); + +static const struct clk_hw *pll_periph0_parents[] = { + &pll_periph0_clk.common.hw +}; + +static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x", + pll_periph0_parents, + 1, 2, 0); + +static const struct clk_hw *pll_periph1_parents[] = { + &pll_periph1_clk.common.hw +}; + +static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x", + pll_periph1_parents, + 1, 2, 0); + +static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x", + &pll_video0_clk.common.hw, + 1, 4, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x", + &pll_video1_clk.common.hw, + 1, 4, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HW(pll_video2_4x_clk, "pll-video2-4x", + &pll_video2_clk.common.hw, + 1, 4, CLK_SET_RATE_PARENT); + +static struct ccu_common *sun50i_h616_ccu_clks[] = { + &pll_cpux_clk.common, + &pll_ddr0_clk.common, + &pll_ddr1_clk.common, + &pll_periph0_clk.common, + &pll_periph1_clk.common, + &pll_gpu_clk.common, + &pll_video0_clk.common, + &pll_video1_clk.common, + &pll_video2_clk.common, + &pll_ve_clk.common, + &pll_de_clk.common, + &pll_audio_hs_clk.common, + &cpux_clk.common, + &axi_clk.common, + &cpux_apb_clk.common, + &psi_ahb1_ahb2_clk.common, + &ahb3_clk.common, + &apb1_clk.common, + &apb2_clk.common, + &mbus_clk.common, + &de_clk.common, + &bus_de_clk.common, + &deinterlace_clk.common, + &bus_deinterlace_clk.common, + &g2d_clk.common, + &bus_g2d_clk.common, + &gpu0_clk.common, + &bus_gpu_clk.common, + &gpu1_clk.common, + &ce_clk.common, + &bus_ce_clk.common, + &ve_clk.common, + &bus_ve_clk.common, + &bus_dma_clk.common, + &bus_hstimer_clk.common, + &avs_clk.common, + &bus_dbg_clk.common, + &bus_psi_clk.common, + &bus_pwm_clk.common, + &bus_iommu_clk.common, + &dram_clk.common, + &mbus_dma_clk.common, + &mbus_ve_clk.common, + &mbus_ce_clk.common, + &mbus_ts_clk.common, + &mbus_nand_clk.common, + &mbus_g2d_clk.common, + &bus_dram_clk.common, + &nand0_clk.common, + &nand1_clk.common, + &bus_nand_clk.common, + &mmc0_clk.common, + &mmc1_clk.common, + &mmc2_clk.common, + &bus_mmc0_clk.common, + &bus_mmc1_clk.common, + &bus_mmc2_clk.common, + &bus_uart0_clk.common, + &bus_uart1_clk.common, + &bus_uart2_clk.common, + &bus_uart3_clk.common, + &bus_uart4_clk.common, + &bus_uart5_clk.common, + &bus_i2c0_clk.common, + &bus_i2c1_clk.common, + &bus_i2c2_clk.common, + &bus_i2c3_clk.common, + &bus_i2c4_clk.common, + &spi0_clk.common, + &spi1_clk.common, + &bus_spi0_clk.common, + &bus_spi1_clk.common, + &emac_25m_clk.common, + &bus_emac0_clk.common, + &bus_emac1_clk.common, + &ts_clk.common, + &bus_ts_clk.common, + &bus_ths_clk.common, + &spdif_clk.common, + &bus_spdif_clk.common, + &dmic_clk.common, + &bus_dmic_clk.common, + &audio_codec_1x_clk.common, + &audio_codec_4x_clk.common, + &bus_audio_codec_clk.common, + &audio_hub_clk.common, + &bus_audio_hub_clk.common, + &usb_ohci0_clk.common, + &usb_phy0_clk.common, + &usb_ohci1_clk.common, + &usb_phy1_clk.common, + &usb_ohci2_clk.common, + &usb_phy2_clk.common, + &usb_ohci3_clk.common, + &usb_phy3_clk.common, + &bus_ohci0_clk.common, + &bus_ohci1_clk.common, + &bus_ohci2_clk.common, + &bus_ohci3_clk.common, + &bus_ehci0_clk.common, + &bus_ehci1_clk.common, + &bus_ehci2_clk.common, + &bus_ehci3_clk.common, + &bus_otg_clk.common, + &bus_keyadc_clk.common, + &hdmi_clk.common, + &hdmi_slow_clk.common, + &hdmi_cec_clk.common, + &bus_hdmi_clk.common, + &bus_tcon_top_clk.common, + &tcon_tv0_clk.common, + &tcon_tv1_clk.common, + &bus_tcon_tv0_clk.common, + &bus_tcon_tv1_clk.common, + &tve0_clk.common, + &bus_tve_top_clk.common, + &bus_tve0_clk.common, + &hdcp_clk.common, + &bus_hdcp_clk.common, +}; + +static struct clk_hw_onecell_data sun50i_h616_hw_clks = { + .hws = { + [CLK_OSC12M] = &osc12M_clk.hw, + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw, + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw, + [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw, + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw, + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw, + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw, + [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw, + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw, + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw, + [CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw, + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw, + [CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw, + [CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw, + [CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw, + [CLK_PLL_VE] = &pll_ve_clk.common.hw, + [CLK_PLL_DE] = &pll_de_clk.common.hw, + [CLK_PLL_AUDIO_HS] = &pll_audio_hs_clk.common.hw, + [CLK_PLL_AUDIO_1X] = &pll_audio_1x_clk.hw, + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw, + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw, + [CLK_CPUX] = &cpux_clk.common.hw, + [CLK_AXI] = &axi_clk.common.hw, + [CLK_CPUX_APB] = &cpux_apb_clk.common.hw, + [CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw, + [CLK_AHB3] = &ahb3_clk.common.hw, + [CLK_APB1] = &apb1_clk.common.hw, + [CLK_APB2] = &apb2_clk.common.hw, + [CLK_MBUS] = &mbus_clk.common.hw, + [CLK_DE] = &de_clk.common.hw, + [CLK_BUS_DE] = &bus_de_clk.common.hw, + [CLK_DEINTERLACE] = &deinterlace_clk.common.hw, + [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw, + [CLK_G2D] = &g2d_clk.common.hw, + [CLK_BUS_G2D] = &bus_g2d_clk.common.hw, + [CLK_GPU0] = &gpu0_clk.common.hw, + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw, + [CLK_GPU1] = &gpu1_clk.common.hw, + [CLK_CE] = &ce_clk.common.hw, + [CLK_BUS_CE] = &bus_ce_clk.common.hw, + [CLK_VE] = &ve_clk.common.hw, + [CLK_BUS_VE] = &bus_ve_clk.common.hw, + [CLK_BUS_DMA] = &bus_dma_clk.common.hw, + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw, + [CLK_AVS] = &avs_clk.common.hw, + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw, + [CLK_BUS_PSI] = &bus_psi_clk.common.hw, + [CLK_BUS_PWM] = &bus_pwm_clk.common.hw, + [CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw, + [CLK_DRAM] = &dram_clk.common.hw, + [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw, + [CLK_MBUS_VE] = &mbus_ve_clk.common.hw, + [CLK_MBUS_CE] = &mbus_ce_clk.common.hw, + [CLK_MBUS_TS] = &mbus_ts_clk.common.hw, + [CLK_MBUS_NAND] = &mbus_nand_clk.common.hw, + [CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw, + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw, + [CLK_NAND0] = &nand0_clk.common.hw, + [CLK_NAND1] = &nand1_clk.common.hw, + [CLK_BUS_NAND] = &bus_nand_clk.common.hw, + [CLK_MMC0] = &mmc0_clk.common.hw, + [CLK_MMC1] = &mmc1_clk.common.hw, + [CLK_MMC2] = &mmc2_clk.common.hw, + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw, + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw, + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw, + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw, + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw, + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw, + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw, + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw, + [CLK_BUS_UART5] = &bus_uart5_clk.common.hw, + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw, + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw, + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw, + [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw, + [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw, + [CLK_SPI0] = &spi0_clk.common.hw, + [CLK_SPI1] = &spi1_clk.common.hw, + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw, + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw, + [CLK_EMAC_25M] = &emac_25m_clk.common.hw, + [CLK_BUS_EMAC0] = &bus_emac0_clk.common.hw, + [CLK_BUS_EMAC1] = &bus_emac1_clk.common.hw, + [CLK_TS] = &ts_clk.common.hw, + [CLK_BUS_TS] = &bus_ts_clk.common.hw, + [CLK_BUS_THS] = &bus_ths_clk.common.hw, + [CLK_SPDIF] = &spdif_clk.common.hw, + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw, + [CLK_DMIC] = &dmic_clk.common.hw, + [CLK_BUS_DMIC] = &bus_dmic_clk.common.hw, + [CLK_AUDIO_CODEC_1X] = &audio_codec_1x_clk.common.hw, + [CLK_AUDIO_CODEC_4X] = &audio_codec_4x_clk.common.hw, + [CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw, + [CLK_AUDIO_HUB] = &audio_hub_clk.common.hw, + [CLK_BUS_AUDIO_HUB] = &bus_audio_hub_clk.common.hw, + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw, + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw, + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw, + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw, + [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw, + [CLK_USB_PHY2] = &usb_phy2_clk.common.hw, + [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw, + [CLK_USB_PHY3] = &usb_phy3_clk.common.hw, + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw, + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw, + [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw, + [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw, + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw, + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw, + [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw, + [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw, + [CLK_BUS_OTG] = &bus_otg_clk.common.hw, + [CLK_BUS_KEYADC] = &bus_keyadc_clk.common.hw, + [CLK_HDMI] = &hdmi_clk.common.hw, + [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw, + [CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw, + [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw, + [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw, + [CLK_TCON_TV0] = &tcon_tv0_clk.common.hw, + [CLK_TCON_TV1] = &tcon_tv1_clk.common.hw, + [CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw, + [CLK_BUS_TCON_TV1] = &bus_tcon_tv1_clk.common.hw, + [CLK_TVE0] = &tve0_clk.common.hw, + [CLK_BUS_TVE_TOP] = &bus_tve_top_clk.common.hw, + [CLK_BUS_TVE0] = &bus_tve0_clk.common.hw, + [CLK_HDCP] = &hdcp_clk.common.hw, + [CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sun50i_h616_ccu_resets[] = { + [RST_MBUS] = { 0x540, BIT(30) }, + + [RST_BUS_DE] = { 0x60c, BIT(16) }, + [RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) }, + [RST_BUS_GPU] = { 0x67c, BIT(16) }, + [RST_BUS_CE] = { 0x68c, BIT(16) }, + [RST_BUS_VE] = { 0x69c, BIT(16) }, + [RST_BUS_DMA] = { 0x70c, BIT(16) }, + [RST_BUS_HSTIMER] = { 0x73c, BIT(16) }, + [RST_BUS_DBG] = { 0x78c, BIT(16) }, + [RST_BUS_PSI] = { 0x79c, BIT(16) }, + [RST_BUS_PWM] = { 0x7ac, BIT(16) }, + [RST_BUS_IOMMU] = { 0x7bc, BIT(16) }, + [RST_BUS_DRAM] = { 0x80c, BIT(16) }, + [RST_BUS_NAND] = { 0x82c, BIT(16) }, + [RST_BUS_MMC0] = { 0x84c, BIT(16) }, + [RST_BUS_MMC1] = { 0x84c, BIT(17) }, + [RST_BUS_MMC2] = { 0x84c, BIT(18) }, + [RST_BUS_UART0] = { 0x90c, BIT(16) }, + [RST_BUS_UART1] = { 0x90c, BIT(17) }, + [RST_BUS_UART2] = { 0x90c, BIT(18) }, + [RST_BUS_UART3] = { 0x90c, BIT(19) }, + [RST_BUS_UART4] = { 0x90c, BIT(20) }, + [RST_BUS_UART5] = { 0x90c, BIT(21) }, + [RST_BUS_I2C0] = { 0x91c, BIT(16) }, + [RST_BUS_I2C1] = { 0x91c, BIT(17) }, + [RST_BUS_I2C2] = { 0x91c, BIT(18) }, + [RST_BUS_I2C3] = { 0x91c, BIT(19) }, + [RST_BUS_I2C4] = { 0x91c, BIT(20) }, + [RST_BUS_SPI0] = { 0x96c, BIT(16) }, + [RST_BUS_SPI1] = { 0x96c, BIT(17) }, + [RST_BUS_EMAC0] = { 0x97c, BIT(16) }, + [RST_BUS_EMAC1] = { 0x97c, BIT(17) }, + [RST_BUS_TS] = { 0x9bc, BIT(16) }, + [RST_BUS_THS] = { 0x9fc, BIT(16) }, + [RST_BUS_SPDIF] = { 0xa2c, BIT(16) }, + [RST_BUS_DMIC] = { 0xa4c, BIT(16) }, + [RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) }, + [RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) }, + + [RST_USB_PHY0] = { 0xa70, BIT(30) }, + [RST_USB_PHY1] = { 0xa74, BIT(30) }, + [RST_USB_PHY2] = { 0xa78, BIT(30) }, + [RST_USB_PHY3] = { 0xa7c, BIT(30) }, + [RST_BUS_OHCI0] = { 0xa8c, BIT(16) }, + [RST_BUS_OHCI1] = { 0xa8c, BIT(17) }, + [RST_BUS_OHCI2] = { 0xa8c, BIT(18) }, + [RST_BUS_OHCI3] = { 0xa8c, BIT(19) }, + [RST_BUS_EHCI0] = { 0xa8c, BIT(20) }, + [RST_BUS_EHCI1] = { 0xa8c, BIT(21) }, + [RST_BUS_EHCI2] = { 0xa8c, BIT(22) }, + [RST_BUS_EHCI3] = { 0xa8c, BIT(23) }, + [RST_BUS_OTG] = { 0xa8c, BIT(24) }, + [RST_BUS_KEYADC] = { 0xa9c, BIT(16) }, + + [RST_BUS_HDMI] = { 0xb1c, BIT(16) }, + [RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) }, + [RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) }, + [RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) }, + [RST_BUS_TCON_TV1] = { 0xb9c, BIT(17) }, + [RST_BUS_TVE_TOP] = { 0xbbc, BIT(16) }, + [RST_BUS_TVE0] = { 0xbbc, BIT(17) }, + [RST_BUS_HDCP] = { 0xc4c, BIT(16) }, +}; + +static const struct sunxi_ccu_desc sun50i_h616_ccu_desc = { + .ccu_clks = sun50i_h616_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_h616_ccu_clks), + + .hw_clks = &sun50i_h616_hw_clks, + + .resets = sun50i_h616_ccu_resets, + .num_resets = ARRAY_SIZE(sun50i_h616_ccu_resets), +}; + +static const u32 pll_regs[] = { + SUN50I_H616_PLL_CPUX_REG, + SUN50I_H616_PLL_DDR0_REG, + SUN50I_H616_PLL_DDR1_REG, + SUN50I_H616_PLL_PERIPH0_REG, + SUN50I_H616_PLL_PERIPH1_REG, + SUN50I_H616_PLL_GPU_REG, + SUN50I_H616_PLL_VIDEO0_REG, + SUN50I_H616_PLL_VIDEO1_REG, + SUN50I_H616_PLL_VIDEO2_REG, + SUN50I_H616_PLL_VE_REG, + SUN50I_H616_PLL_DE_REG, + SUN50I_H616_PLL_AUDIO_REG, +}; + +static const u32 pll_video_regs[] = { + SUN50I_H616_PLL_VIDEO0_REG, + SUN50I_H616_PLL_VIDEO1_REG, + SUN50I_H616_PLL_VIDEO2_REG, +}; + +static const u32 usb2_clk_regs[] = { + SUN50I_H616_USB0_CLK_REG, + SUN50I_H616_USB1_CLK_REG, + SUN50I_H616_USB2_CLK_REG, + SUN50I_H616_USB3_CLK_REG, +}; + +static void __init sun50i_h616_ccu_setup(struct device_node *node) +{ + void __iomem *reg; + u32 val; + int i; + + reg = of_io_request_and_map(node, 0, of_node_full_name(node)); + if (IS_ERR(reg)) { + pr_err("%pOF: Could not map clock registers\n", node); + return; + } + + /* Enable the lock bits and the output enable bits on all PLLs */ + for (i = 0; i < ARRAY_SIZE(pll_regs); i++) { + val = readl(reg + pll_regs[i]); + val |= BIT(29) | BIT(27); + writel(val, reg + pll_regs[i]); + } + + /* + * Force the output divider of video PLLs to 0. + * + * See the comment before pll-video0 definition for the reason. + */ + for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) { + val = readl(reg + pll_video_regs[i]); + val &= ~BIT(0); + writel(val, reg + pll_video_regs[i]); + } + + /* + * Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz) + * + * This clock mux is still mysterious, and the code just enforces + * it to have a valid clock parent. + */ + for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) { + val = readl(reg + usb2_clk_regs[i]); + val &= ~GENMASK(25, 24); + writel(val, reg + usb2_clk_regs[i]); + } + + /* + * Force the post-divider of pll-audio to 12 and the output divider + * of it to 2, so 24576000 and 22579200 rates can be set exactly. + */ + val = readl(reg + SUN50I_H616_PLL_AUDIO_REG); + val &= ~(GENMASK(21, 16) | BIT(0)); + writel(val | (11 << 16) | BIT(0), reg + SUN50I_H616_PLL_AUDIO_REG); + + /* + * First clock parent (osc32K) is unusable for CEC. But since there + * is no good way to force parent switch (both run with same frequency), + * just set second clock parent here. + */ + val = readl(reg + SUN50I_H616_HDMI_CEC_CLK_REG); + val |= BIT(24); + writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG); + + i = sunxi_ccu_probe(node, reg, &sun50i_h616_ccu_desc); + if (i) + pr_err("%pOF: probing clocks fails: %d\n", node, i); +} + +CLK_OF_DECLARE(sun50i_h616_ccu, "allwinner,sun50i-h616-ccu", + sun50i_h616_ccu_setup); diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.h b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h new file mode 100644 index 000000000000..dd671b413f22 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2020 Arm Ltd. + */ + +#ifndef _CCU_SUN50I_H616_H_ +#define _CCU_SUN50I_H616_H_ + +#include +#include + +#define CLK_OSC12M 0 +#define CLK_PLL_CPUX 1 +#define CLK_PLL_DDR0 2 +#define CLK_PLL_DDR1 3 + +/* PLL_PERIPH0 exported for PRCM */ + +#define CLK_PLL_PERIPH0_2X 5 +#define CLK_PLL_PERIPH1 6 +#define CLK_PLL_PERIPH1_2X 7 +#define CLK_PLL_GPU 8 +#define CLK_PLL_VIDEO0 9 +#define CLK_PLL_VIDEO0_4X 10 +#define CLK_PLL_VIDEO1 11 +#define CLK_PLL_VIDEO1_4X 12 +#define CLK_PLL_VIDEO2 13 +#define CLK_PLL_VIDEO2_4X 14 +#define CLK_PLL_VE 15 +#define CLK_PLL_DE 16 +#define CLK_PLL_AUDIO_HS 17 +#define CLK_PLL_AUDIO_1X 18 +#define CLK_PLL_AUDIO_2X 19 +#define CLK_PLL_AUDIO_4X 20 + +/* CPUX clock exported for DVFS */ + +#define CLK_AXI 22 +#define CLK_CPUX_APB 23 +#define CLK_PSI_AHB1_AHB2 24 +#define CLK_AHB3 25 + +/* APB1 clock exported for PIO */ + +#define CLK_APB2 27 +#define CLK_MBUS 28 + +/* All module clocks and bus gates are exported except DRAM */ + +#define CLK_DRAM 49 + +#define CLK_BUS_DRAM 56 + +#define CLK_NUMBER (CLK_BUS_HDCP + 1) + +#endif /* _CCU_SUN50I_H616_H_ */ diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h b/include/dt-bindings/clock/sun50i-h616-ccu.h new file mode 100644 index 000000000000..4fc08b0df2f3 --- /dev/null +++ b/include/dt-bindings/clock/sun50i-h616-ccu.h @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* + * Copyright (C) 2020 Arm Ltd. + */ + +#ifndef _DT_BINDINGS_CLK_SUN50I_H616_H_ +#define _DT_BINDINGS_CLK_SUN50I_H616_H_ + +#define CLK_PLL_PERIPH0 4 + +#define CLK_CPUX 21 + +#define CLK_APB1 26 + +#define CLK_DE 29 +#define CLK_BUS_DE 30 +#define CLK_DEINTERLACE 31 +#define CLK_BUS_DEINTERLACE 32 +#define CLK_G2D 33 +#define CLK_BUS_G2D 34 +#define CLK_GPU0 35 +#define CLK_BUS_GPU 36 +#define CLK_GPU1 37 +#define CLK_CE 38 +#define CLK_BUS_CE 39 +#define CLK_VE 40 +#define CLK_BUS_VE 41 +#define CLK_BUS_DMA 42 +#define CLK_BUS_HSTIMER 43 +#define CLK_AVS 44 +#define CLK_BUS_DBG 45 +#define CLK_BUS_PSI 46 +#define CLK_BUS_PWM 47 +#define CLK_BUS_IOMMU 48 + +#define CLK_MBUS_DMA 50 +#define CLK_MBUS_VE 51 +#define CLK_MBUS_CE 52 +#define CLK_MBUS_TS 53 +#define CLK_MBUS_NAND 54 +#define CLK_MBUS_G2D 55 + +#define CLK_NAND0 57 +#define CLK_NAND1 58 +#define CLK_BUS_NAND 59 +#define CLK_MMC0 60 +#define CLK_MMC1 61 +#define CLK_MMC2 62 +#define CLK_BUS_MMC0 63 +#define CLK_BUS_MMC1 64 +#define CLK_BUS_MMC2 65 +#define CLK_BUS_UART0 66 +#define CLK_BUS_UART1 67 +#define CLK_BUS_UART2 68 +#define CLK_BUS_UART3 69 +#define CLK_BUS_UART4 70 +#define CLK_BUS_UART5 71 +#define CLK_BUS_I2C0 72 +#define CLK_BUS_I2C1 73 +#define CLK_BUS_I2C2 74 +#define CLK_BUS_I2C3 75 +#define CLK_BUS_I2C4 76 +#define CLK_SPI0 77 +#define CLK_SPI1 78 +#define CLK_BUS_SPI0 79 +#define CLK_BUS_SPI1 80 +#define CLK_EMAC_25M 81 +#define CLK_BUS_EMAC0 82 +#define CLK_BUS_EMAC1 83 +#define CLK_TS 84 +#define CLK_BUS_TS 85 +#define CLK_BUS_THS 86 +#define CLK_SPDIF 87 +#define CLK_BUS_SPDIF 88 +#define CLK_DMIC 89 +#define CLK_BUS_DMIC 90 +#define CLK_AUDIO_CODEC_1X 91 +#define CLK_AUDIO_CODEC_4X 92 +#define CLK_BUS_AUDIO_CODEC 93 +#define CLK_AUDIO_HUB 94 +#define CLK_BUS_AUDIO_HUB 95 +#define CLK_USB_OHCI0 96 +#define CLK_USB_PHY0 97 +#define CLK_USB_OHCI1 98 +#define CLK_USB_PHY1 99 +#define CLK_USB_OHCI2 100 +#define CLK_USB_PHY2 101 +#define CLK_USB_OHCI3 102 +#define CLK_USB_PHY3 103 +#define CLK_BUS_OHCI0 104 +#define CLK_BUS_OHCI1 105 +#define CLK_BUS_OHCI2 106 +#define CLK_BUS_OHCI3 107 +#define CLK_BUS_EHCI0 108 +#define CLK_BUS_EHCI1 109 +#define CLK_BUS_EHCI2 110 +#define CLK_BUS_EHCI3 111 +#define CLK_BUS_OTG 112 +#define CLK_BUS_KEYADC 113 +#define CLK_HDMI 114 +#define CLK_HDMI_SLOW 115 +#define CLK_HDMI_CEC 116 +#define CLK_BUS_HDMI 117 +#define CLK_BUS_TCON_TOP 118 +#define CLK_TCON_TV0 119 +#define CLK_TCON_TV1 120 +#define CLK_BUS_TCON_TV0 121 +#define CLK_BUS_TCON_TV1 122 +#define CLK_TVE0 123 +#define CLK_BUS_TVE_TOP 124 +#define CLK_BUS_TVE0 125 +#define CLK_HDCP 126 +#define CLK_BUS_HDCP 127 + +#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */ diff --git a/include/dt-bindings/reset/sun50i-h616-ccu.h b/include/dt-bindings/reset/sun50i-h616-ccu.h new file mode 100644 index 000000000000..cb6285a8d128 --- /dev/null +++ b/include/dt-bindings/reset/sun50i-h616-ccu.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* + * Copyright (C) 2020 Arm Ltd. + */ + +#ifndef _DT_BINDINGS_RESET_SUN50I_H616_H_ +#define _DT_BINDINGS_RESET_SUN50I_H616_H_ + +#define RST_MBUS 0 +#define RST_BUS_DE 1 +#define RST_BUS_DEINTERLACE 2 +#define RST_BUS_GPU 3 +#define RST_BUS_CE 4 +#define RST_BUS_VE 5 +#define RST_BUS_DMA 6 +#define RST_BUS_HSTIMER 7 +#define RST_BUS_DBG 8 +#define RST_BUS_PSI 9 +#define RST_BUS_PWM 10 +#define RST_BUS_IOMMU 11 +#define RST_BUS_DRAM 12 +#define RST_BUS_NAND 13 +#define RST_BUS_MMC0 14 +#define RST_BUS_MMC1 15 +#define RST_BUS_MMC2 16 +#define RST_BUS_UART0 17 +#define RST_BUS_UART1 18 +#define RST_BUS_UART2 19 +#define RST_BUS_UART3 20 +#define RST_BUS_UART4 21 +#define RST_BUS_UART5 22 +#define RST_BUS_I2C0 23 +#define RST_BUS_I2C1 24 +#define RST_BUS_I2C2 25 +#define RST_BUS_I2C3 26 +#define RST_BUS_I2C4 27 +#define RST_BUS_SPI0 28 +#define RST_BUS_SPI1 29 +#define RST_BUS_EMAC0 30 +#define RST_BUS_EMAC1 31 +#define RST_BUS_TS 32 +#define RST_BUS_THS 33 +#define RST_BUS_SPDIF 34 +#define RST_BUS_DMIC 35 +#define RST_BUS_AUDIO_CODEC 36 +#define RST_BUS_AUDIO_HUB 37 +#define RST_USB_PHY0 38 +#define RST_USB_PHY1 39 +#define RST_USB_PHY2 40 +#define RST_USB_PHY3 41 +#define RST_BUS_OHCI0 42 +#define RST_BUS_OHCI1 43 +#define RST_BUS_OHCI2 44 +#define RST_BUS_OHCI3 45 +#define RST_BUS_EHCI0 46 +#define RST_BUS_EHCI1 47 +#define RST_BUS_EHCI2 48 +#define RST_BUS_EHCI3 49 +#define RST_BUS_OTG 50 +#define RST_BUS_HDMI 51 +#define RST_BUS_HDMI_SUB 52 +#define RST_BUS_TCON_TOP 53 +#define RST_BUS_TCON_TV0 54 +#define RST_BUS_TCON_TV1 55 +#define RST_BUS_TVE_TOP 56 +#define RST_BUS_TVE0 57 +#define RST_BUS_HDCP 58 +#define RST_BUS_KEYADC 59 + +#endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */