mirror of
https://github.com/torvalds/linux.git
synced 2026-05-31 10:33:41 +02:00
drm/bridge: parade-ps8640: Use regmap APIs
Replace the direct i2c access (i2c_smbus_* functions) with regmap APIs, which will simplify the future update on ps8640 driver. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> [dianders: whitespace fixes reported by dim apply-branch] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210921110556.v6.1.I2351df94f18d5d8debc22d4d100f36fac560409a@changeid
This commit is contained in:
parent
dfbc6cb60b
commit
692d8db0a5
|
|
@ -9,6 +9,7 @@
|
|||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_graph.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
|
||||
#include <drm/drm_bridge.h>
|
||||
|
|
@ -31,6 +32,11 @@
|
|||
|
||||
#define NUM_MIPI_LANES 4
|
||||
|
||||
#define COMMON_PS8640_REGMAP_CONFIG \
|
||||
.reg_bits = 8, \
|
||||
.val_bits = 8, \
|
||||
.cache_type = REGCACHE_NONE
|
||||
|
||||
/*
|
||||
* PS8640 uses multiple addresses:
|
||||
* page[0]: for DP control
|
||||
|
|
@ -64,12 +70,48 @@ struct ps8640 {
|
|||
struct drm_bridge *panel_bridge;
|
||||
struct mipi_dsi_device *dsi;
|
||||
struct i2c_client *page[MAX_DEVS];
|
||||
struct regmap *regmap[MAX_DEVS];
|
||||
struct regulator_bulk_data supplies[2];
|
||||
struct gpio_desc *gpio_reset;
|
||||
struct gpio_desc *gpio_powerdown;
|
||||
bool powered;
|
||||
};
|
||||
|
||||
static const struct regmap_config ps8640_regmap_config[] = {
|
||||
[PAGE0_DP_CNTL] = {
|
||||
COMMON_PS8640_REGMAP_CONFIG,
|
||||
.max_register = 0xbf,
|
||||
},
|
||||
[PAGE1_VDO_BDG] = {
|
||||
COMMON_PS8640_REGMAP_CONFIG,
|
||||
.max_register = 0xff,
|
||||
},
|
||||
[PAGE2_TOP_CNTL] = {
|
||||
COMMON_PS8640_REGMAP_CONFIG,
|
||||
.max_register = 0xff,
|
||||
},
|
||||
[PAGE3_DSI_CNTL1] = {
|
||||
COMMON_PS8640_REGMAP_CONFIG,
|
||||
.max_register = 0xff,
|
||||
},
|
||||
[PAGE4_MIPI_PHY] = {
|
||||
COMMON_PS8640_REGMAP_CONFIG,
|
||||
.max_register = 0xff,
|
||||
},
|
||||
[PAGE5_VPLL] = {
|
||||
COMMON_PS8640_REGMAP_CONFIG,
|
||||
.max_register = 0x7f,
|
||||
},
|
||||
[PAGE6_DSI_CNTL2] = {
|
||||
COMMON_PS8640_REGMAP_CONFIG,
|
||||
.max_register = 0xff,
|
||||
},
|
||||
[PAGE7_SPI_CNTL] = {
|
||||
COMMON_PS8640_REGMAP_CONFIG,
|
||||
.max_register = 0xff,
|
||||
},
|
||||
};
|
||||
|
||||
static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e)
|
||||
{
|
||||
return container_of(e, struct ps8640, bridge);
|
||||
|
|
@ -78,13 +120,13 @@ static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e)
|
|||
static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge,
|
||||
const enum ps8640_vdo_control ctrl)
|
||||
{
|
||||
struct i2c_client *client = ps_bridge->page[PAGE3_DSI_CNTL1];
|
||||
struct regmap *map = ps_bridge->regmap[PAGE3_DSI_CNTL1];
|
||||
u8 vdo_ctrl_buf[] = { VDO_CTL_ADD, ctrl };
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_write_i2c_block_data(client, PAGE3_SET_ADD,
|
||||
sizeof(vdo_ctrl_buf),
|
||||
vdo_ctrl_buf);
|
||||
ret = regmap_bulk_write(map, PAGE3_SET_ADD,
|
||||
vdo_ctrl_buf, sizeof(vdo_ctrl_buf));
|
||||
|
||||
if (ret < 0) {
|
||||
DRM_ERROR("failed to %sable VDO: %d\n",
|
||||
ctrl == ENABLE ? "en" : "dis", ret);
|
||||
|
|
@ -96,8 +138,7 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge,
|
|||
|
||||
static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
|
||||
{
|
||||
struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL];
|
||||
unsigned long timeout;
|
||||
struct regmap *map = ps_bridge->regmap[PAGE2_TOP_CNTL];
|
||||
int ret, status;
|
||||
|
||||
if (ps_bridge->powered)
|
||||
|
|
@ -121,18 +162,12 @@ static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
|
|||
*/
|
||||
msleep(200);
|
||||
|
||||
timeout = jiffies + msecs_to_jiffies(200) + 1;
|
||||
ret = regmap_read_poll_timeout(map, PAGE2_GPIO_H, status,
|
||||
status & PS_GPIO9, 20 * 1000, 200 * 1000);
|
||||
|
||||
while (time_is_after_jiffies(timeout)) {
|
||||
status = i2c_smbus_read_byte_data(client, PAGE2_GPIO_H);
|
||||
if (status < 0) {
|
||||
DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", status);
|
||||
goto err_regulators_disable;
|
||||
}
|
||||
if ((status & PS_GPIO9) == PS_GPIO9)
|
||||
break;
|
||||
|
||||
msleep(20);
|
||||
if (ret < 0) {
|
||||
DRM_ERROR("failed read PAGE2_GPIO_H: %d\n", ret);
|
||||
goto err_regulators_disable;
|
||||
}
|
||||
|
||||
msleep(50);
|
||||
|
|
@ -144,22 +179,15 @@ static void ps8640_bridge_poweron(struct ps8640 *ps_bridge)
|
|||
* disabled by the manufacturer. Once disabled, all MCS commands are
|
||||
* ignored by the display interface.
|
||||
*/
|
||||
status = i2c_smbus_read_byte_data(client, PAGE2_MCS_EN);
|
||||
if (status < 0) {
|
||||
DRM_ERROR("failed read PAGE2_MCS_EN: %d\n", status);
|
||||
goto err_regulators_disable;
|
||||
}
|
||||
|
||||
ret = i2c_smbus_write_byte_data(client, PAGE2_MCS_EN,
|
||||
status & ~MCS_EN);
|
||||
ret = regmap_update_bits(map, PAGE2_MCS_EN, MCS_EN, 0);
|
||||
if (ret < 0) {
|
||||
DRM_ERROR("failed write PAGE2_MCS_EN: %d\n", ret);
|
||||
goto err_regulators_disable;
|
||||
}
|
||||
|
||||
/* Switch access edp panel's edid through i2c */
|
||||
ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS,
|
||||
I2C_BYPASS_EN);
|
||||
ret = regmap_write(map, PAGE2_I2C_BYPASS, I2C_BYPASS_EN);
|
||||
if (ret < 0) {
|
||||
DRM_ERROR("failed write PAGE2_I2C_BYPASS: %d\n", ret);
|
||||
goto err_regulators_disable;
|
||||
|
|
@ -362,15 +390,21 @@ static int ps8640_probe(struct i2c_client *client)
|
|||
|
||||
ps_bridge->page[PAGE0_DP_CNTL] = client;
|
||||
|
||||
ps_bridge->regmap[PAGE0_DP_CNTL] = devm_regmap_init_i2c(client, ps8640_regmap_config);
|
||||
if (IS_ERR(ps_bridge->regmap[PAGE0_DP_CNTL]))
|
||||
return PTR_ERR(ps_bridge->regmap[PAGE0_DP_CNTL]);
|
||||
|
||||
for (i = 1; i < ARRAY_SIZE(ps_bridge->page); i++) {
|
||||
ps_bridge->page[i] = devm_i2c_new_dummy_device(&client->dev,
|
||||
client->adapter,
|
||||
client->addr + i);
|
||||
if (IS_ERR(ps_bridge->page[i])) {
|
||||
dev_err(dev, "failed i2c dummy device, address %02x\n",
|
||||
client->addr + i);
|
||||
if (IS_ERR(ps_bridge->page[i]))
|
||||
return PTR_ERR(ps_bridge->page[i]);
|
||||
}
|
||||
|
||||
ps_bridge->regmap[i] = devm_regmap_init_i2c(ps_bridge->page[i],
|
||||
ps8640_regmap_config + i);
|
||||
if (IS_ERR(ps_bridge->regmap[i]))
|
||||
return PTR_ERR(ps_bridge->regmap[i]);
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, ps_bridge);
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user