From 68427905850302612bd68dcec7baf791ca6f8032 Mon Sep 17 00:00:00 2001 From: Stefano Radaelli Date: Wed, 1 Jul 2026 17:53:08 +0200 Subject: [PATCH] arm64: dts: imx95-var-dart: wm8904: Add INL1 as DMICDAT1 On the DART-MX95 platform, INL1/DMICDAT1 is used as the DMIC data line. Add the wlf,in1l-as-dmicdat1 property to reflect this configuration. This enables the internal MUX to switch between the ADC and DMIC as the capture input. Co-developed-by: Alexander Herfurtner Signed-off-by: Alexander Herfurtner Signed-off-by: Stefano Radaelli Signed-off-by: Frank Li --- arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi index f3b44a866917..b4c55bd33858 100644 --- a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi @@ -158,6 +158,8 @@ wm8904: audio-codec@1a { /bits/ 16 <0x04af 0x324b 0x0010 0x050e>; /* GPIO1 = DMIC_CLK, don't touch others */ wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; + /* DMIC is connected to IN1L */ + wlf,in1l-as-dmicdat1; }; };