Merge branch '20250103-qcom_ipq_cmnpll-v8-1-c89fb4d4849d@quicinc.com' into clk-for-6.14

Merge the IPQ CMN PLL clock binding through a topic branch to make it
available to DeviceTree source branches as well.

Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq9574-cmn-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CMN PLL Clock Controller on IPQ SoC
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Luo Jie <quic_luoj@quicinc.com>
+
+description:
+  The CMN (or common) PLL clock controller expects a reference
+  input clock. This reference clock is from the on-board Wi-Fi.
+  The CMN PLL supplies a number of fixed rate output clocks to
+  the devices providing networking functions and to GCC. These
+  networking hardware include PPE (packet process engine), PCS
+  and the externally connected switch or PHY devices. The CMN
+  PLL block also outputs fixed rate clocks to GCC. The PLL's
+  primary function is to enable fixed rate output clocks for
+  networking hardware functions used with the IPQ SoC.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq9574-cmn-pll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The reference clock. The supported clock rates include
+          25000000, 31250000, 40000000, 48000000, 50000000 and 96000000 HZ.
+      - description: The AHB clock
+      - description: The SYS clock
+    description:
+      The reference clock is the source clock of CMN PLL, which is from the
+      Wi-Fi. The AHB and SYS clocks must be enabled to access CMN PLL
+      clock registers.
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: sys
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
+    #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+
+    cmn_pll: clock-controller@9b000 {
+        compatible = "qcom,ipq9574-cmn-pll";
+        reg = <0x0009b000 0x800>;
+        clocks = <&cmn_pll_ref_clk>,
+                 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+                 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+        clock-names = "ref", "ahb", "sys";
+        #clock-cells = <1>;
+        assigned-clocks = <&cmn_pll CMN_PLL_CLK>;
+        assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+    };
+...

include/dt-bindings/clock/qcom,ipq-cmn-pll.h

@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_IPQ_CMN_PLL_H
+#define _DT_BINDINGS_CLK_QCOM_IPQ_CMN_PLL_H
+
+/* CMN PLL core clock. */
+#define CMN_PLL_CLK			0
+
+/* The output clocks from CMN PLL of IPQ9574. */
+#define XO_24MHZ_CLK			1
+#define SLEEP_32KHZ_CLK			2
+#define PCS_31P25MHZ_CLK		3
+#define NSS_1200MHZ_CLK			4
+#define PPE_353MHZ_CLK			5
+#define ETH0_50MHZ_CLK			6
+#define ETH1_50MHZ_CLK			7
+#define ETH2_50MHZ_CLK			8
+#define ETH_25MHZ_CLK			9
+#endif