From 622a2dbdc0192f946b05da175277c70f6a612ef2 Mon Sep 17 00:00:00 2001 From: Zaixiang Xu Date: Mon, 13 Jul 2026 15:45:59 +0800 Subject: [PATCH] hwmon: (sht3x) Document support for GXCAS GXHT30 The GXCAS GXHT30 is a humidity and temperature sensor that is a drop-in replacement for and fully software compatible with the Sensirion SHT30. It is handled by the "sensirion,sht30" fallback compatible without any driver changes; manual instantiation works with the existing sht3x device name. Document the chip as supported. Signed-off-by: Zaixiang Xu Link: https://lore.kernel.org/r/20260713074559.12196-5-zaixiang.xu.dev@gmail.com Signed-off-by: Guenter Roeck --- Documentation/hwmon/sht3x.rst | 17 ++++++++++++++--- drivers/hwmon/Kconfig | 5 +++-- 2 files changed, 17 insertions(+), 5 deletions(-) diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst index ea1642920295..4f67671eb0cd 100644 --- a/Documentation/hwmon/sht3x.rst +++ b/Documentation/hwmon/sht3x.rst @@ -31,6 +31,14 @@ Supported chips: Datasheet: https://sensirion.com/media/documents/4B40CEF3/640B2346/Sensirion_Humidity_Sensors_SHT85_Datasheet.pdf + * GXCAS GXHT30 + + Prefix: 'sht3x' + + Addresses scanned: none + + Datasheet: https://www.galaxy-cas.com/uploads/files/202509/GXHT30_datasheet_V3.9_20250919170350.pdf + Author: - David Frey @@ -40,9 +48,12 @@ Description ----------- This driver implements support for the Sensirion SHT3x-DIS, STS3x-DIS and SHT85 -series of humidity and temperature sensors. Temperature is measured in degrees -celsius, relative humidity is expressed as a percentage. In the sysfs interface, -all values are scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. +series of humidity and temperature sensors, as well as the compatible GXCAS +GXHT30. The GXHT30 is a drop-in replacement for the SHT30: instantiate it from +devicetree with the "gxcas,gxht30", "sensirion,sht30" compatibles, or manually +using the sht3x device name. Temperature is measured in degrees celsius, +relative humidity is expressed as a percentage. In the sysfs interface, all +values are scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. The device communicates with the I2C protocol. SHT3x sensors can have the I2C addresses 0x44 or 0x45 (0x4a or 0x4b for sts3x), depending on the wiring. SHT85 diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 08c29685126a..64fc00ade5ca 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -2023,8 +2023,9 @@ config SENSORS_SHT3x depends on I2C select CRC8 help - If you say yes here you get support for the Sensiron SHT30, SHT31 and - SHT85 humidity and temperature sensors. + If you say yes here you get support for the Sensiron SHT30, SHT31, + SHT85 and the compatible GXCAS GXHT30 humidity and temperature + sensors. This driver can also be built as a module. If so, the module will be called sht3x.