github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-06-05 21:15:53 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

arm64: dts: qcom: Add pm7550ba PMIC dtsi

Browse Source 
Add dtsi for pm7550ba PMIC found in Qualcomm platforms.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1691415534-31820-5-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Rohit Agarwal 2023-08-07 19:08:49 +05:30 committed by Bjorn Andersson
parent e99a7a0c85
commit 5f78e80ca7
1 changed files with 70 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

70
arch/arm64/boot/dts/qcom/pm7550ba.dtsi Normal file
View File

@ -0,0 +1,70 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
/ {
thermal-zones {
pm7550ba-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm7550ba_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
trip2 {
temperature = <145000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
};
&spmi_bus {
pm7550ba: pmic@7 {
compatible = "qcom,pm7550ba", "qcom,spmi-pmic";
reg = <7 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm7550ba_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm7550ba_gpios: gpio@8800 {
compatible = "qcom,pm7550ba-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm7550ba_gpios 0 0 8>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm7550ba_eusb2_repeater: phy@fd00 {
compatible = "qcom,pm7550ba-eusb2-repeater", "qcom,pm8550b-eusb2-repeater";
reg = <0xfd00>;
#phy-cells = <0>;
};
};
};