From 5ebc20921b7fff9feb44de465448e17a382c9965 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 20 Feb 2026 21:22:19 +0100 Subject: [PATCH] ASoC: tas2552: Allow audio enable GPIO to sleep The audio enable GPIO is not toggled in any critical section where it could not sleep, allow the audio enable GPIO to sleep. This allows the driver to operate the audio enable GPIO connected to I2C GPIO expander. Signed-off-by: Marek Vasut Link: https://patch.msgid.link/20260220202332.241035-1-marex@nabladev.com Signed-off-by: Mark Brown --- sound/soc/codecs/tas2552.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c index 43449d7c2584..80206c2e0946 100644 --- a/sound/soc/codecs/tas2552.c +++ b/sound/soc/codecs/tas2552.c @@ -487,7 +487,7 @@ static int tas2552_runtime_suspend(struct device *dev) regcache_cache_only(tas2552->regmap, true); regcache_mark_dirty(tas2552->regmap); - gpiod_set_value(tas2552->enable_gpio, 0); + gpiod_set_value_cansleep(tas2552->enable_gpio, 0); return 0; } @@ -496,7 +496,7 @@ static int tas2552_runtime_resume(struct device *dev) { struct tas2552_data *tas2552 = dev_get_drvdata(dev); - gpiod_set_value(tas2552->enable_gpio, 1); + gpiod_set_value_cansleep(tas2552->enable_gpio, 1); tas2552_sw_shutdown(tas2552, 0); @@ -583,7 +583,7 @@ static int tas2552_component_probe(struct snd_soc_component *component) return ret; } - gpiod_set_value(tas2552->enable_gpio, 1); + gpiod_set_value_cansleep(tas2552->enable_gpio, 1); ret = pm_runtime_resume_and_get(component->dev); if (ret < 0) { @@ -608,7 +608,7 @@ static int tas2552_component_probe(struct snd_soc_component *component) probe_fail: pm_runtime_put_noidle(component->dev); - gpiod_set_value(tas2552->enable_gpio, 0); + gpiod_set_value_cansleep(tas2552->enable_gpio, 0); regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies), tas2552->supplies); @@ -621,7 +621,7 @@ static void tas2552_component_remove(struct snd_soc_component *component) pm_runtime_put(component->dev); - gpiod_set_value(tas2552->enable_gpio, 0); + gpiod_set_value_cansleep(tas2552->enable_gpio, 0); }; #ifdef CONFIG_PM