From 4fb873c9648e383206e0a91cef9b03aa54066aca Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Mon, 5 Nov 2018 16:36:07 +0100
Subject: [PATCH 01/17] drm/imx: ignore plane updates on disabled crtcs

This patch fixes backtraces like the following when sending SIGKILL to a
process with a currently pending plane update:

    [drm:ipu_plane_atomic_check] CRTC should be enabled
    [drm:drm_framebuffer_remove] *ERROR* failed to commit
    ------------[ cut here ]------------
    WARNING: CPU: 3 PID: 63 at drivers/gpu/drm/drm_framebuffer.c:926 drm_framebuffer_remove+0x47c/0x498
    atomic remove_fb failed with -22

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/drm/imx/ipuv3-plane.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c
index c390924de93d..21e964f6ab5c 100644
--- a/drivers/gpu/drm/imx/ipuv3-plane.c
+++ b/drivers/gpu/drm/imx/ipuv3-plane.c
@@ -370,9 +370,9 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
 	if (ret)
 		return ret;
 
-	/* CRTC should be enabled */
+	/* nothing to check when disabling or disabled */
 	if (!crtc_state->enable)
-		return -EINVAL;
+		return 0;
 
 	switch (plane->type) {
 	case DRM_PLANE_TYPE_PRIMARY:

From 2c0408dd0d8906b26fe8023889af7adf5e68b2c2 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Thu, 20 Dec 2018 11:06:38 +0300
Subject: [PATCH 02/17] gpu: ipu-v3: Fix i.MX51 CSI control registers offset

The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.

Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/ipu-v3/ipu-common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 474b00e19697..5b7cdbfe062f 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -898,8 +898,8 @@ static struct ipu_devtype ipu_type_imx51 = {
 	.cpmem_ofs = 0x1f000000,
 	.srm_ofs = 0x1f040000,
 	.tpm_ofs = 0x1f060000,
-	.csi0_ofs = 0x1f030000,
-	.csi1_ofs = 0x1f038000,
+	.csi0_ofs = 0x1e030000,
+	.csi1_ofs = 0x1e038000,
 	.ic_ofs = 0x1e020000,
 	.disp0_ofs = 0x1e040000,
 	.disp1_ofs = 0x1e048000,

From aa3312012f103f91f123600bbf768b11c8f431bc Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Sun, 13 Jan 2019 09:47:42 +0100
Subject: [PATCH 03/17] drm/imx: imx-ldb: add missing of_node_puts

The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.

Move the initialization channel->child = child; down to just
before the call to imx_ldb_register so that intervening failures
don't need to clear it.  Add a label at the end of the function to
do all the of_node_puts.

The semantic patch that finds part of this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
*  return ...;
)
   ...
 }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/drm/imx/imx-ldb.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c
index 2c5bbe317353..e31e263cf86b 100644
--- a/drivers/gpu/drm/imx/imx-ldb.c
+++ b/drivers/gpu/drm/imx/imx-ldb.c
@@ -643,8 +643,10 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 		int bus_format;
 
 		ret = of_property_read_u32(child, "reg", &i);
-		if (ret || i < 0 || i > 1)
-			return -EINVAL;
+		if (ret || i < 0 || i > 1) {
+			ret = -EINVAL;
+			goto free_child;
+		}
 
 		if (!of_device_is_available(child))
 			continue;
@@ -657,7 +659,6 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 		channel = &imx_ldb->channel[i];
 		channel->ldb = imx_ldb;
 		channel->chno = i;
-		channel->child = child;
 
 		/*
 		 * The output port is port@4 with an external 4-port mux or
@@ -667,13 +668,13 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 						  imx_ldb->lvds_mux ? 4 : 2, 0,
 						  &channel->panel, &channel->bridge);
 		if (ret && ret != -ENODEV)
-			return ret;
+			goto free_child;
 
 		/* panel ddc only if there is no bridge */
 		if (!channel->bridge) {
 			ret = imx_ldb_panel_ddc(dev, channel, child);
 			if (ret)
-				return ret;
+				goto free_child;
 		}
 
 		bus_format = of_get_bus_format(dev, child);
@@ -689,18 +690,26 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 		if (bus_format < 0) {
 			dev_err(dev, "could not determine data mapping: %d\n",
 				bus_format);
-			return bus_format;
+			ret = bus_format;
+			goto free_child;
 		}
 		channel->bus_format = bus_format;
+		channel->child = child;
 
 		ret = imx_ldb_register(drm, channel);
-		if (ret)
-			return ret;
+		if (ret) {
+			channel->child = NULL;
+			goto free_child;
+		}
 	}
 
 	dev_set_drvdata(dev, imx_ldb);
 
 	return 0;
+
+free_child:
+	of_node_put(child);
+	return ret;
 }
 
 static void imx_ldb_unbind(struct device *dev, struct device *master,

From bb867d219fda7fbaabea3314702474c4eac2b91d Mon Sep 17 00:00:00 2001
From: Steve Longerbeam <slongerbeam@gmail.com>
Date: Tue, 16 Oct 2018 17:31:40 -0700
Subject: [PATCH 04/17] gpu: ipu-v3: Fix CSI offsets for imx53

The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.

Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/ipu-v3/ipu-common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c
index 5b7cdbfe062f..0a7d4395d427 100644
--- a/drivers/gpu/ipu-v3/ipu-common.c
+++ b/drivers/gpu/ipu-v3/ipu-common.c
@@ -914,8 +914,8 @@ static struct ipu_devtype ipu_type_imx53 = {
 	.cpmem_ofs = 0x07000000,
 	.srm_ofs = 0x07040000,
 	.tpm_ofs = 0x07060000,
-	.csi0_ofs = 0x07030000,
-	.csi1_ofs = 0x07038000,
+	.csi0_ofs = 0x06030000,
+	.csi1_ofs = 0x06038000,
 	.ic_ofs = 0x06020000,
 	.disp0_ofs = 0x06040000,
 	.disp1_ofs = 0x06048000,

From eb0200a4357da100064971689d3a0e9e3cf57f33 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Tue, 18 Dec 2018 16:46:29 +0100
Subject: [PATCH 05/17] gpu: ipu-v3: pre: don't trigger update if buffer
 address doesn't change

On a NOP double buffer update where current buffer address is the same
as the next buffer address, the SDW_UPDATE bit clears too late. As we
are now using this bit to determine when it is safe to signal flip
completion to userspace this will delay completion of atomic commits
where one plane doesn't change the buffer by a whole frame period.

Fix this by remembering the last buffer address and just skip the
double buffer update if it would not change the buffer address.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: initialize last_bufaddr in ipu_pre_configure]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/gpu/ipu-v3/ipu-pre.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-pre.c
index 2f8db9d62551..4a28f3fbb0a2 100644
--- a/drivers/gpu/ipu-v3/ipu-pre.c
+++ b/drivers/gpu/ipu-v3/ipu-pre.c
@@ -106,6 +106,7 @@ struct ipu_pre {
 	void			*buffer_virt;
 	bool			in_use;
 	unsigned int		safe_window_end;
+	unsigned int		last_bufaddr;
 };
 
 static DEFINE_MUTEX(ipu_pre_list_mutex);
@@ -185,6 +186,7 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
 
 	writel(bufaddr, pre->regs + IPU_PRE_CUR_BUF);
 	writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
+	pre->last_bufaddr = bufaddr;
 
 	val = IPU_PRE_PREF_ENG_CTRL_INPUT_PIXEL_FORMAT(0) |
 	      IPU_PRE_PREF_ENG_CTRL_INPUT_ACTIVE_BPP(active_bpp) |
@@ -242,7 +244,11 @@ void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr)
 	unsigned short current_yblock;
 	u32 val;
 
+	if (bufaddr == pre->last_bufaddr)
+		return;
+
 	writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
+	pre->last_bufaddr = bufaddr;
 
 	do {
 		if (time_after(jiffies, timeout)) {

From 82abf33766712d8446ea137a3400165e31bd12c7 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Fri, 7 Dec 2018 11:16:53 -0800
Subject: [PATCH 06/17] drm/sched: Always trace the dependencies we wait on, to
 fix a race.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The entity->dependency can go away completely once we've called
drm_sched_entity_add_dependency_cb() (if the cb is called before we
get around to tracing).  The tracepoint is more useful if we trace
every dependency instead of just ones that get callbacks installed,
anyway, so just do that.

Fixes any easy-to-produce OOPS when tracing the scheduler on V3D with
"perf record -a -e gpu_scheduler:.\* glxgears" and DEBUG_SLAB enabled.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/scheduler/sched_entity.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/scheduler/sched_entity.c b/drivers/gpu/drm/scheduler/sched_entity.c
index 4463d3826ecb..e2942c9a11a7 100644
--- a/drivers/gpu/drm/scheduler/sched_entity.c
+++ b/drivers/gpu/drm/scheduler/sched_entity.c
@@ -440,13 +440,10 @@ struct drm_sched_job *drm_sched_entity_pop_job(struct drm_sched_entity *entity)
 
 	while ((entity->dependency =
 			sched->ops->dependency(sched_job, entity))) {
+		trace_drm_sched_job_wait_dep(sched_job, entity->dependency);
 
-		if (drm_sched_entity_add_dependency_cb(entity)) {
-
-			trace_drm_sched_job_wait_dep(sched_job,
-						     entity->dependency);
+		if (drm_sched_entity_add_dependency_cb(entity))
 			return NULL;
-		}
 	}
 
 	/* skip jobs from entity that marked guilty */

From 727962f030c23422a01e8b22d0f463815fb15ec4 Mon Sep 17 00:00:00 2001
From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Date: Thu, 24 Jan 2019 12:06:00 -0500
Subject: [PATCH 07/17] drm/amd/display: Expose connector VRR range via debugfs

[Why]
It's useful to know the min and max vrr range for IGT testing.

[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "vrr_range".

Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 .../amd/display/amdgpu_dm/amdgpu_dm_debugfs.c | 22 ++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
index 9a7ac58eb18e..ddd75a4d8ba5 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c
@@ -671,6 +671,25 @@ static ssize_t dp_phy_test_pattern_debugfs_write(struct file *f, const char __us
 	return bytes_from_user;
 }
 
+/*
+ * Returns the min and max vrr vfreq through the connector's debugfs file.
+ * Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
+ */
+static int vrr_range_show(struct seq_file *m, void *data)
+{
+	struct drm_connector *connector = m->private;
+	struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector);
+
+	if (connector->status != connector_status_connected)
+		return -ENODEV;
+
+	seq_printf(m, "Min: %u\n", (unsigned int)aconnector->min_vfreq);
+	seq_printf(m, "Max: %u\n", (unsigned int)aconnector->max_vfreq);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(vrr_range);
+
 static const struct file_operations dp_link_settings_debugfs_fops = {
 	.owner = THIS_MODULE,
 	.read = dp_link_settings_read,
@@ -697,7 +716,8 @@ static const struct {
 } dp_debugfs_entries[] = {
 		{"link_settings", &dp_link_settings_debugfs_fops},
 		{"phy_settings", &dp_phy_settings_debugfs_fop},
-		{"test_pattern", &dp_phy_test_pattern_fops}
+		{"test_pattern", &dp_phy_test_pattern_fops},
+		{"vrr_range", &vrr_range_fops}
 };
 
 int connector_debugfs_init(struct amdgpu_dm_connector *connector)

From 7fd56e0260a22c0cfaf9adb94a2427b76e239dd0 Mon Sep 17 00:00:00 2001
From: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Date: Wed, 6 Feb 2019 12:01:16 -0200
Subject: [PATCH 08/17] drm/vkms: Fix license inconsistent

Fixes license inconsistent related to the VKMS driver and remove the
redundant boilerplate comment.

Fixes: 854502fa0a38 ("drm/vkms: Add basic CRTC initialization")

Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206140116.7qvy2lpwbcd7wds6@smtp.gmail.com
---
 drivers/gpu/drm/vkms/vkms_crc.c    | 3 ++-
 drivers/gpu/drm/vkms/vkms_crtc.c   | 8 +-------
 drivers/gpu/drm/vkms/vkms_drv.c    | 7 +------
 drivers/gpu/drm/vkms/vkms_drv.h    | 2 ++
 drivers/gpu/drm/vkms/vkms_gem.c    | 8 +-------
 drivers/gpu/drm/vkms/vkms_output.c | 8 +-------
 drivers/gpu/drm/vkms/vkms_plane.c  | 8 +-------
 7 files changed, 9 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
index 9d9e8146db90..d7b409a3c0f8 100644
--- a/drivers/gpu/drm/vkms/vkms_crc.c
+++ b/drivers/gpu/drm/vkms/vkms_crc.c
@@ -1,4 +1,5 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
+
 #include "vkms_drv.h"
 #include <linux/crc32.h>
 #include <drm/drm_atomic.h>
diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
index 177bbcb38306..eb56ee893761 100644
--- a/drivers/gpu/drm/vkms/vkms_crtc.c
+++ b/drivers/gpu/drm/vkms/vkms_crtc.c
@@ -1,10 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 #include "vkms_drv.h"
 #include <drm/drm_atomic_helper.h>
diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
index 83087877565c..7dcbecb5fac2 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.c
+++ b/drivers/gpu/drm/vkms/vkms_drv.c
@@ -1,9 +1,4 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 /**
  * DOC: vkms (Virtual Kernel Modesetting)
diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
index e4469cd3d254..81f1cfbeb936 100644
--- a/drivers/gpu/drm/vkms/vkms_drv.h
+++ b/drivers/gpu/drm/vkms/vkms_drv.h
@@ -1,3 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
 #ifndef _VKMS_DRV_H_
 #define _VKMS_DRV_H_
 
diff --git a/drivers/gpu/drm/vkms/vkms_gem.c b/drivers/gpu/drm/vkms/vkms_gem.c
index 80311daed47a..138b0bb325cf 100644
--- a/drivers/gpu/drm/vkms/vkms_gem.c
+++ b/drivers/gpu/drm/vkms/vkms_gem.c
@@ -1,10 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 #include <linux/shmem_fs.h>
 
diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
index 271a0eb9042c..4173e4f48334 100644
--- a/drivers/gpu/drm/vkms/vkms_output.c
+++ b/drivers/gpu/drm/vkms/vkms_output.c
@@ -1,10 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 #include "vkms_drv.h"
 #include <drm/drm_crtc_helper.h>
diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
index 418817600ad1..0e67d2d42f0c 100644
--- a/drivers/gpu/drm/vkms/vkms_plane.c
+++ b/drivers/gpu/drm/vkms/vkms_plane.c
@@ -1,10 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
+// SPDX-License-Identifier: GPL-2.0+
 
 #include "vkms_drv.h"
 #include <drm/drm_plane_helper.h>

From 9659c1af451a92533d2d8dfcecd1a848a08a883b Mon Sep 17 00:00:00 2001
From: Clint Taylor <clinton.a.taylor@intel.com>
Date: Mon, 17 Dec 2018 14:13:47 -0800
Subject: [PATCH 09/17] drm/i915/icl: combo port vswing programming changes per
 BSPEC
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In August 2018 the BSPEC changed the ICL port programming sequence to
closely resemble earlier gen programming sequence. Restrict combo phy to
HBR max rate unless eDP panel is connected to port.

v2: remove debug code that Imre found
v3: simplify translation table if-else
v4: edp translation table now based on link rate and low_swing
v5: Misc review comments + r-b
BSpec: 21257
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit b265a2a6255f581258ccfdccbd2efca51a142fe2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  |   4 +
 drivers/gpu/drm/i915/intel_ddi.c | 238 +++++++++++--------------------
 drivers/gpu/drm/i915/intel_dp.c  |   4 +-
 3 files changed, 93 insertions(+), 153 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0a7d60509ca7..29acdb96160d 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1866,6 +1866,10 @@ enum i915_power_well_id {
 
 #define CNL_PORT_TX_DW7_GRP(port)	_MMIO(_CNL_PORT_TX_DW_GRP((port), 7))
 #define CNL_PORT_TX_DW7_LN0(port)	_MMIO(_CNL_PORT_TX_DW_LN0((port), 7))
+#define ICL_PORT_TX_DW7_AUX(port)	_MMIO(_ICL_PORT_TX_DW_AUX(7, port))
+#define ICL_PORT_TX_DW7_GRP(port)	_MMIO(_ICL_PORT_TX_DW_GRP(7, port))
+#define ICL_PORT_TX_DW7_LN0(port)	_MMIO(_ICL_PORT_TX_DW_LN(7, 0, port))
+#define ICL_PORT_TX_DW7_LN(port, ln)	_MMIO(_ICL_PORT_TX_DW_LN(7, ln, port))
 #define   N_SCALAR(x)			((x) << 24)
 #define   N_SCALAR_MASK			(0x7F << 24)
 
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 4079050f9d6c..7edce1b7b348 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -494,103 +494,58 @@ static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_1_05V[] = {
 	{ 0x2, 0x7F, 0x3F, 0x00, 0x00 },	/* 400   400      0.0   */
 };
 
-struct icl_combo_phy_ddi_buf_trans {
-	u32 dw2_swing_select;
-	u32 dw2_swing_scalar;
-	u32 dw4_scaling;
+/* icl_combo_phy_ddi_translations */
+static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hbr2[] = {
+						/* NT mV Trans mV db    */
+	{ 0xA, 0x35, 0x3F, 0x00, 0x00 },	/* 350   350      0.0   */
+	{ 0xA, 0x4F, 0x37, 0x00, 0x08 },	/* 350   500      3.1   */
+	{ 0xC, 0x71, 0x2F, 0x00, 0x10 },	/* 350   700      6.0   */
+	{ 0x6, 0x7F, 0x2B, 0x00, 0x14 },	/* 350   900      8.2   */
+	{ 0xA, 0x4C, 0x3F, 0x00, 0x00 },	/* 500   500      0.0   */
+	{ 0xC, 0x73, 0x34, 0x00, 0x0B },	/* 500   700      2.9   */
+	{ 0x6, 0x7F, 0x2F, 0x00, 0x10 },	/* 500   900      5.1   */
+	{ 0xC, 0x6C, 0x3C, 0x00, 0x03 },	/* 650   700      0.6   */
+	{ 0x6, 0x7F, 0x35, 0x00, 0x0A },	/* 600   900      3.5   */
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 900   900      0.0   */
 };
 
-/* Voltage Swing Programming for VccIO 0.85V for DP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_85V[] = {
-				/* Voltage mV  db    */
-	{ 0x2, 0x98, 0x0018 },	/* 400         0.0   */
-	{ 0x2, 0x98, 0x3015 },	/* 400         3.5   */
-	{ 0x2, 0x98, 0x6012 },	/* 400         6.0   */
-	{ 0x2, 0x98, 0x900F },	/* 400         9.5   */
-	{ 0xB, 0x70, 0x0018 },	/* 600         0.0   */
-	{ 0xB, 0x70, 0x3015 },	/* 600         3.5   */
-	{ 0xB, 0x70, 0x6012 },	/* 600         6.0   */
-	{ 0x5, 0x00, 0x0018 },	/* 800         0.0   */
-	{ 0x5, 0x00, 0x3015 },	/* 800         3.5   */
-	{ 0x6, 0x98, 0x0018 },	/* 1200        0.0   */
+static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_hbr2[] = {
+						/* NT mV Trans mV db    */
+	{ 0x0, 0x7F, 0x3F, 0x00, 0x00 },	/* 200   200      0.0   */
+	{ 0x8, 0x7F, 0x38, 0x00, 0x07 },	/* 200   250      1.9   */
+	{ 0x1, 0x7F, 0x33, 0x00, 0x0C },	/* 200   300      3.5   */
+	{ 0x9, 0x7F, 0x31, 0x00, 0x0E },	/* 200   350      4.9   */
+	{ 0x8, 0x7F, 0x3F, 0x00, 0x00 },	/* 250   250      0.0   */
+	{ 0x1, 0x7F, 0x38, 0x00, 0x07 },	/* 250   300      1.6   */
+	{ 0x9, 0x7F, 0x35, 0x00, 0x0A },	/* 250   350      2.9   */
+	{ 0x1, 0x7F, 0x3F, 0x00, 0x00 },	/* 300   300      0.0   */
+	{ 0x9, 0x7F, 0x38, 0x00, 0x07 },	/* 300   350      1.3   */
+	{ 0x9, 0x7F, 0x3F, 0x00, 0x00 },	/* 350   350      0.0   */
 };
 
-/* FIXME - After table is updated in Bspec */
-/* Voltage Swing Programming for VccIO 0.85V for eDP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_85V[] = {
-				/* Voltage mV  db    */
-	{ 0x0, 0x00, 0x00 },	/* 200         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 200         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         6.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 250         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 350         0.0   */
+static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_hbr3[] = {
+						/* NT mV Trans mV db    */
+	{ 0xA, 0x35, 0x3F, 0x00, 0x00 },	/* 350   350      0.0   */
+	{ 0xA, 0x4F, 0x37, 0x00, 0x08 },	/* 350   500      3.1   */
+	{ 0xC, 0x71, 0x2F, 0x00, 0x10 },	/* 350   700      6.0   */
+	{ 0x6, 0x7F, 0x2B, 0x00, 0x14 },	/* 350   900      8.2   */
+	{ 0xA, 0x4C, 0x3F, 0x00, 0x00 },	/* 500   500      0.0   */
+	{ 0xC, 0x73, 0x34, 0x00, 0x0B },	/* 500   700      2.9   */
+	{ 0x6, 0x7F, 0x2F, 0x00, 0x10 },	/* 500   900      5.1   */
+	{ 0xC, 0x6C, 0x3C, 0x00, 0x03 },	/* 650   700      0.6   */
+	{ 0x6, 0x7F, 0x35, 0x00, 0x0A },	/* 600   900      3.5   */
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 900   900      0.0   */
 };
 
-/* Voltage Swing Programming for VccIO 0.95V for DP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_95V[] = {
-				/* Voltage mV  db    */
-	{ 0x2, 0x98, 0x0018 },	/* 400         0.0   */
-	{ 0x2, 0x98, 0x3015 },	/* 400         3.5   */
-	{ 0x2, 0x98, 0x6012 },	/* 400         6.0   */
-	{ 0x2, 0x98, 0x900F },	/* 400         9.5   */
-	{ 0x4, 0x98, 0x0018 },	/* 600         0.0   */
-	{ 0x4, 0x98, 0x3015 },	/* 600         3.5   */
-	{ 0x4, 0x98, 0x6012 },	/* 600         6.0   */
-	{ 0x5, 0x76, 0x0018 },	/* 800         0.0   */
-	{ 0x5, 0x76, 0x3015 },	/* 800         3.5   */
-	{ 0x6, 0x98, 0x0018 },	/* 1200        0.0   */
-};
-
-/* FIXME - After table is updated in Bspec */
-/* Voltage Swing Programming for VccIO 0.95V for eDP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_95V[] = {
-				/* Voltage mV  db    */
-	{ 0x0, 0x00, 0x00 },	/* 200         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 200         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         6.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 250         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 350         0.0   */
-};
-
-/* Voltage Swing Programming for VccIO 1.05V for DP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_1_05V[] = {
-				/* Voltage mV  db    */
-	{ 0x2, 0x98, 0x0018 },	/* 400         0.0   */
-	{ 0x2, 0x98, 0x3015 },	/* 400         3.5   */
-	{ 0x2, 0x98, 0x6012 },	/* 400         6.0   */
-	{ 0x2, 0x98, 0x900F },	/* 400         9.5   */
-	{ 0x4, 0x98, 0x0018 },	/* 600         0.0   */
-	{ 0x4, 0x98, 0x3015 },	/* 600         3.5   */
-	{ 0x4, 0x98, 0x6012 },	/* 600         6.0   */
-	{ 0x5, 0x71, 0x0018 },	/* 800         0.0   */
-	{ 0x5, 0x71, 0x3015 },	/* 800         3.5   */
-	{ 0x6, 0x98, 0x0018 },	/* 1200        0.0   */
-};
-
-/* FIXME - After table is updated in Bspec */
-/* Voltage Swing Programming for VccIO 1.05V for eDP */
-static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_1_05V[] = {
-				/* Voltage mV  db    */
-	{ 0x0, 0x00, 0x00 },	/* 200         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 200         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 200         6.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 250         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 250         4.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         0.0   */
-	{ 0x0, 0x00, 0x00 },	/* 300         1.5   */
-	{ 0x0, 0x00, 0x00 },	/* 350         0.0   */
+static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_hdmi[] = {
+						/* NT mV Trans mV db    */
+	{ 0xA, 0x60, 0x3F, 0x00, 0x00 },	/* 450   450      0.0   */
+	{ 0xB, 0x73, 0x36, 0x00, 0x09 },	/* 450   650      3.2   */
+	{ 0x6, 0x7F, 0x31, 0x00, 0x0E },	/* 450   850      5.5   */
+	{ 0xB, 0x73, 0x3F, 0x00, 0x00 },	/* 650   650      0.0   ALS */
+	{ 0x6, 0x7F, 0x37, 0x00, 0x08 },	/* 650   850      2.3   */
+	{ 0x6, 0x7F, 0x3F, 0x00, 0x00 },	/* 850   850      0.0   */
+	{ 0x6, 0x7F, 0x35, 0x00, 0x0A },	/* 600   850      3.0   */
 };
 
 struct icl_mg_phy_ddi_buf_trans {
@@ -871,43 +826,23 @@ cnl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
 	}
 }
 
-static const struct icl_combo_phy_ddi_buf_trans *
+static const struct cnl_ddi_buf_trans *
 icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, enum port port,
-			int type, int *n_entries)
+			int type, int rate, int *n_entries)
 {
-	u32 voltage = I915_READ(ICL_PORT_COMP_DW3(port)) & VOLTAGE_INFO_MASK;
-
-	if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
-		switch (voltage) {
-		case VOLTAGE_INFO_0_85V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_85V);
-			return icl_combo_phy_ddi_translations_edp_0_85V;
-		case VOLTAGE_INFO_0_95V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_95V);
-			return icl_combo_phy_ddi_translations_edp_0_95V;
-		case VOLTAGE_INFO_1_05V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_1_05V);
-			return icl_combo_phy_ddi_translations_edp_1_05V;
-		default:
-			MISSING_CASE(voltage);
-			return NULL;
-		}
-	} else {
-		switch (voltage) {
-		case VOLTAGE_INFO_0_85V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_85V);
-			return icl_combo_phy_ddi_translations_dp_hdmi_0_85V;
-		case VOLTAGE_INFO_0_95V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_95V);
-			return icl_combo_phy_ddi_translations_dp_hdmi_0_95V;
-		case VOLTAGE_INFO_1_05V:
-			*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_1_05V);
-			return icl_combo_phy_ddi_translations_dp_hdmi_1_05V;
-		default:
-			MISSING_CASE(voltage);
-			return NULL;
-		}
+	if (type == INTEL_OUTPUT_HDMI) {
+		*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_hdmi);
+		return icl_combo_phy_ddi_translations_hdmi;
+	} else if (rate > 540000 && type == INTEL_OUTPUT_EDP) {
+		*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr3);
+		return icl_combo_phy_ddi_translations_edp_hbr3;
+	} else if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
+		*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr2);
+		return icl_combo_phy_ddi_translations_edp_hbr2;
 	}
+
+	*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hbr2);
+	return icl_combo_phy_ddi_translations_dp_hbr2;
 }
 
 static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port)
@@ -918,8 +853,8 @@ static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por
 
 	if (IS_ICELAKE(dev_priv)) {
 		if (intel_port_is_combophy(dev_priv, port))
-			icl_get_combo_buf_trans(dev_priv, port,
-						INTEL_OUTPUT_HDMI, &n_entries);
+			icl_get_combo_buf_trans(dev_priv, port, INTEL_OUTPUT_HDMI,
+						0, &n_entries);
 		else
 			n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
 		default_entry = n_entries - 1;
@@ -2275,13 +2210,14 @@ static void bxt_ddi_vswing_sequence(struct intel_encoder *encoder,
 u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	enum port port = encoder->port;
 	int n_entries;
 
 	if (IS_ICELAKE(dev_priv)) {
 		if (intel_port_is_combophy(dev_priv, port))
 			icl_get_combo_buf_trans(dev_priv, port, encoder->type,
-						&n_entries);
+						intel_dp->link_rate, &n_entries);
 		else
 			n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
 	} else if (IS_CANNONLAKE(dev_priv)) {
@@ -2462,14 +2398,15 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
 }
 
 static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
-					 u32 level, enum port port, int type)
+					u32 level, enum port port, int type,
+					int rate)
 {
-	const struct icl_combo_phy_ddi_buf_trans *ddi_translations = NULL;
+	const struct cnl_ddi_buf_trans *ddi_translations = NULL;
 	u32 n_entries, val;
 	int ln;
 
 	ddi_translations = icl_get_combo_buf_trans(dev_priv, port, type,
-						   &n_entries);
+						   rate, &n_entries);
 	if (!ddi_translations)
 		return;
 
@@ -2478,34 +2415,23 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 		level = n_entries - 1;
 	}
 
-	/* Set PORT_TX_DW5 Rterm Sel to 110b. */
+	/* Set PORT_TX_DW5 */
 	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
-	val &= ~RTERM_SELECT_MASK;
+	val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK |
+		  TAP2_DISABLE | TAP3_DISABLE);
+	val |= SCALING_MODE_SEL(0x2);
 	val |= RTERM_SELECT(0x6);
-	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
-
-	/* Program PORT_TX_DW5 */
-	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
-	/* Set DisableTap2 and DisableTap3 if MIPI DSI
-	 * Clear DisableTap2 and DisableTap3 for all other Ports
-	 */
-	if (type == INTEL_OUTPUT_DSI) {
-		val |= TAP2_DISABLE;
-		val |= TAP3_DISABLE;
-	} else {
-		val &= ~TAP2_DISABLE;
-		val &= ~TAP3_DISABLE;
-	}
+	val |= TAP3_DISABLE;
 	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
 
 	/* Program PORT_TX_DW2 */
 	val = I915_READ(ICL_PORT_TX_DW2_LN0(port));
 	val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
 		 RCOMP_SCALAR_MASK);
-	val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_select);
-	val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_select);
+	val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
+	val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
 	/* Program Rcomp scalar for every table entry */
-	val |= RCOMP_SCALAR(ddi_translations[level].dw2_swing_scalar);
+	val |= RCOMP_SCALAR(0x98);
 	I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val);
 
 	/* Program PORT_TX_DW4 */
@@ -2514,9 +2440,17 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 		val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
 		val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
 			 CURSOR_COEFF_MASK);
-		val |= ddi_translations[level].dw4_scaling;
+		val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
+		val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
+		val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
 		I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
 	}
+
+	/* Program PORT_TX_DW7 */
+	val = I915_READ(ICL_PORT_TX_DW7_LN0(port));
+	val &= ~N_SCALAR_MASK;
+	val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
+	I915_WRITE(ICL_PORT_TX_DW7_GRP(port), val);
 }
 
 static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
@@ -2581,7 +2515,7 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
 
 	/* 5. Program swing and de-emphasis */
-	icl_ddi_combo_vswing_program(dev_priv, level, port, type);
+	icl_ddi_combo_vswing_program(dev_priv, level, port, type, rate);
 
 	/* 6. Set training enable to trigger update */
 	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index fdd2cbc56fa3..22a74608c6e4 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -304,9 +304,11 @@ static int cnl_max_source_rate(struct intel_dp *intel_dp)
 static int icl_max_source_rate(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	enum port port = dig_port->base.port;
 
-	if (port == PORT_B)
+	if (intel_port_is_combophy(dev_priv, port) &&
+	    !intel_dp_is_edp(intel_dp))
 		return 540000;
 
 	return 810000;

<!DOCTYPE html>
<html lang="en-US" data-theme="gitea-auto">
<head>
	<meta name="viewport" content="width=device-width, initial-scale=1">
	<title>Internal Server Error - Gitea: Git with a cup of tea</title>
	<link rel="icon" href="/assets/img/favicon.svg" type="image/svg+xml">
	<link rel="alternate icon" href="/assets/img/favicon.png" type="image/png">
	<link rel="stylesheet" href="/assets/css/index.css?v=1.22.0">
<link rel="stylesheet" href="/assets/css/theme-gitea-auto.css?v=1.22.0">

</head>
<body>
	<div class="full height">
		<nav class="ui secondary menu">
			<div class="ui container tw-flex">
				<div class="item tw-flex-1">
					<a href="/" aria-label="Home">
						<img width="30" height="30" src="/assets/img/logo.svg" alt="Logo" aria-hidden="true">
					</a>
				</div>
				<div class="item">
					<button class="ui icon button disabled"><svg viewBox="0 0 16 16" class="svg octicon-three-bars" aria-hidden="true" width="16" height="16"><path d="M1 2.75A.75.75 0 0 1 1.75 2h12.5a.75.75 0 0 1 0 1.5H1.75A.75.75 0 0 1 1 2.75m0 5A.75.75 0 0 1 1.75 7h12.5a.75.75 0 0 1 0 1.5H1.75A.75.75 0 0 1 1 7.75M1.75 12h12.5a.75.75 0 0 1 0 1.5H1.75a.75.75 0 0 1 0-1.5"/></svg></button>
				</div>
			</div>
		</nav>
		<div class="divider tw-my-0"></div>
		<div role="main" class="page-content status-page-500">
			<div class="ui container" >
				<style> .ui.message.flash-message { text-align: left; } </style>
				




			</div>
			<p class="tw-mt-8 center"><img src="/assets/img/500.png" alt="Internal Server Error"></p>
			<div class="divider"></div>
			<div class="ui container tw-my-8">
				
				<div class="center tw-mt-8">
					<p>Gitea Version: 1.22.0</p>
					
				</div>
			</div>
		</div>
	</div>

	
	<script type="module">
		const embedded = document.querySelector('.page-content .page-content.status-page-500');
		if (embedded) {
			
			const embeddedParent = embedded.parentNode;
			let main = document.querySelector('.page-content');
			main = main ?? document.querySelector('body');
			main.prepend(document.createElement('hr'));
			main.prepend(embedded);
			embeddedParent.remove(); 
		}
	</script>
</body>
</html>