github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-05-28 00:53:34 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

arm64: dts: rockchip: add rs485 support on uart2 of rk3399-puma-haikou

Browse Source 
A hardware switch can set the rs485 transceiver into half or full duplex
mode.

Switching to the half-duplex mode requires the user to enable em485 on
uart5 using ioctl, DE/RE are both connected to GPIO2_C3 which is the
RTS signal for uart0. Implement GPIO2_C3 as rts-gpios with RTS_ON_SEND
option enabled (default) so that driver mode gets enabled while sending
(RTS high) and receiver mode gets enabled while not sending (RTS low).

In full-duplex mode (em485 is disabled), DE is connected to GPIO2_C3 and
RE is grounded (enabled). Since GPIO2_C3 is implemented as rts-gpios, the
driver mode gets enabled whenever we want to send something and RE is not
affected (always enabled) in this case by the state of RTS.

Signed-off-by: Farouk Bouabid <farouk.bouabid@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240208-dev-rx-enable-v6-1-39e68e17a339@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Farouk Bouabid 2024-02-08 16:39:55 +01:00 committed by Heiko Stuebner
parent 4b325c0d4f
commit 54448f711a
1 changed files with 2 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
View File

@ -273,11 +273,12 @@ &u2phy0_host {
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
pinctrl-0 = <&uart0_xfer>;
status = "okay";
};
&uart2 {
rts-gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
status = "okay";
};