From 4af7ad0e6d7aa4403dbb1dac7b9659b0421efcaa Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 13 May 2026 17:52:48 +0200 Subject: [PATCH] usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); which has two problems: USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte frame can drive the loop one byte past the destination if the WCOVE BMC receiver does not enforce the PD object-count limit in hardware. The existing FIXME flagged this as unverified. Independently, regmap_read() takes an unsigned int * and stores a full unsigned int at the destination. Passing the byte pointer msg + i means each iteration writes four bytes; the high three are zero (val_bits is 8) and are normally overwritten by the next iteration, but the final iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration already writes three zero bytes past msg, which sits on the IRQ thread's stack in wcove_typec_irq(). Clamp the loop to sizeof(struct pd_message) and read each register into a local before storing only its low byte, so the copy can never exceed the destination regardless of what RXINFO reports. Assisted-by: gkh_clanker_t1000 Cc: stable Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/2026051347-clustered-deflected-9543@gregkh Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/wcove.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c index 759c982bb16a..0e5a3e277c3e 100644 --- a/drivers/usb/typec/tcpm/wcove.c +++ b/drivers/usb/typec/tcpm/wcove.c @@ -444,9 +444,11 @@ static int wcove_start_toggling(struct tcpc_dev *tcpc, return regmap_write(wcove->regmap, USBC_CONTROL1, usbc_ctrl); } -static int wcove_read_rx_buffer(struct wcove_typec *wcove, void *msg) +static int wcove_read_rx_buffer(struct wcove_typec *wcove, + struct pd_message *msg) { - unsigned int info; + unsigned int info, val, len; + u8 *buf = (u8 *)msg; int ret; int i; @@ -454,12 +456,13 @@ static int wcove_read_rx_buffer(struct wcove_typec *wcove, void *msg) if (ret) return ret; - /* FIXME: Check that USBC_RXINFO_RXBYTES(info) matches the header */ + len = min(USBC_RXINFO_RXBYTES(info), sizeof(*msg)); - for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) { - ret = regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); + for (i = 0; i < len; i++) { + ret = regmap_read(wcove->regmap, USBC_RX_DATA + i, &val); if (ret) return ret; + buf[i] = val; } return regmap_write(wcove->regmap, USBC_RXSTATUS,