mirror of
https://github.com/torvalds/linux.git
synced 2026-06-01 02:53:36 +02:00
ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID
because of which when card is inserted, usb otg is enumerated
and the card is never detected.
[ 64.492645] cfg80211: failed to load regulatory.db
[ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2
[ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 76.412763] usb usb2: Product: EHCI Host Controller
[ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd
[ 76.424623] usb usb2: SerialNumber: ci_hdrc.0
[ 76.431755] hub 2-0:1.0: USB hub found
[ 76.435862] hub 2-0:1.0: 1 port detected
The TRM mentions GPIO_1 pad should be muxed/assigned for card detect
and ENET_RX_ER pad for USB_OTG_ID for proper operation.
This patch fixes pin muxing as per TRM and is tested on a
i.Core 1.5 MX6 DL SOM.
[ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable
[ 22.459992] mmc0: new high speed SDHC card at address 0001
[ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 22.478856] mmcblk0: p1 p2
Fixes: 6df11287f7 ("ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
parent
d36f260718
commit
4a601da92c
|
|
@ -397,7 +397,7 @@ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
|
|||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||||
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
|
||||
>;
|
||||
};
|
||||
|
||||
|
|
@ -409,6 +409,7 @@ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
|
|||
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
|
||||
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
|
||||
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
|
||||
MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user