From 8da0efc3da9312b65f5cbf06e57d284f69222b2e Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Mon, 3 Nov 2025 11:58:09 +0000 Subject: [PATCH 1/5] ASoC: doc: cs35l56: Update firmware filename description for B0 silicon Update the text for firmware file naming to show that the l?u? suffix is supported on CS35L56 B0 silicon and ampN was only used on early firmware. The previous version of this text only said that B0 silicon used the ampN suffix. Since kernel 6.16 the driver supports both the old ampN and new l?u? suffix for B0 silicon. New firmwares will use the l?u? suffix. Signed-off-by: Richard Fitzgerald Link: https://patch.msgid.link/20251103115809.33953-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown --- Documentation/sound/codecs/cs35l56.rst | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/Documentation/sound/codecs/cs35l56.rst b/Documentation/sound/codecs/cs35l56.rst index 57d1964453e1..d5363b08f515 100644 --- a/Documentation/sound/codecs/cs35l56.rst +++ b/Documentation/sound/codecs/cs35l56.rst @@ -105,10 +105,10 @@ In this example the SSID is 10280c63. The format of the firmware file names is: -SoundWire (except CS35L56 Rev B0): +SoundWire: cs35lxx-b0-dsp1-misc-SSID[-spkidX]-l?u? -SoundWire CS35L56 Rev B0: +SoundWire CS35L56 Rev B0 firmware released before kernel version 6.16: cs35lxx-b0-dsp1-misc-SSID[-spkidX]-ampN Non-SoundWire (HDA and I2S): @@ -127,9 +127,8 @@ Where: * spkidX is an optional part, used for laptops that have firmware configurations for different makes and models of internal speakers. -The CS35L56 Rev B0 continues to use the old filename scheme because a -large number of firmware files have already been published with these -names. +Early firmware for CS35L56 Rev B0 used the ALSA prefix (ampN) as the +filename qualifier. Support for the l?u? qualifier was added in kernel 6.16. Sound Open Firmware and ALSA topology files ------------------------------------------- From 249d96b492efb7a773296ab2c62179918301c146 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 4 Nov 2025 13:49:14 +0200 Subject: [PATCH 2/5] ASoC: da7213: Use component driver suspend/resume Since snd_soc_suspend() is invoked through snd_soc_pm_ops->suspend(), and snd_soc_pm_ops is associated with the soc_driver (defined in sound/soc/soc-core.c), and there is no parent-child relationship between the soc_driver and the DA7213 codec driver, the power management subsystem does not enforce a specific suspend/resume order between the DA7213 driver and the soc_driver. Because of this, the different codec component functionalities, called from snd_soc_resume() to reconfigure various functions, can race with the DA7213 struct dev_pm_ops::resume function, leading to misapplied configuration. This occasionally results in clipped sound. Fix this by dropping the struct dev_pm_ops::{suspend, resume} and use instead struct snd_soc_component_driver::{suspend, resume}. This ensures the proper configuration sequence is handled by the ASoC subsystem. Cc: stable@vger.kernel.org Fixes: 431e040065c8 ("ASoC: da7213: Add suspend to RAM support") Signed-off-by: Claudiu Beznea Link: https://patch.msgid.link/20251104114914.2060603-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Mark Brown --- sound/soc/codecs/da7213.c | 69 +++++++++++++++++++++++++-------------- sound/soc/codecs/da7213.h | 1 + 2 files changed, 45 insertions(+), 25 deletions(-) diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index ae89260ca215..3420011da444 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -2124,11 +2124,50 @@ static int da7213_probe(struct snd_soc_component *component) return 0; } +static int da7213_runtime_suspend(struct device *dev) +{ + struct da7213_priv *da7213 = dev_get_drvdata(dev); + + regcache_cache_only(da7213->regmap, true); + regcache_mark_dirty(da7213->regmap); + regulator_bulk_disable(DA7213_NUM_SUPPLIES, da7213->supplies); + + return 0; +} + +static int da7213_runtime_resume(struct device *dev) +{ + struct da7213_priv *da7213 = dev_get_drvdata(dev); + int ret; + + ret = regulator_bulk_enable(DA7213_NUM_SUPPLIES, da7213->supplies); + if (ret < 0) + return ret; + regcache_cache_only(da7213->regmap, false); + return regcache_sync(da7213->regmap); +} + +static int da7213_suspend(struct snd_soc_component *component) +{ + struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component); + + return da7213_runtime_suspend(da7213->dev); +} + +static int da7213_resume(struct snd_soc_component *component) +{ + struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component); + + return da7213_runtime_resume(da7213->dev); +} + static const struct snd_soc_component_driver soc_component_dev_da7213 = { .probe = da7213_probe, .set_bias_level = da7213_set_bias_level, .controls = da7213_snd_controls, .num_controls = ARRAY_SIZE(da7213_snd_controls), + .suspend = da7213_suspend, + .resume = da7213_resume, .dapm_widgets = da7213_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(da7213_dapm_widgets), .dapm_routes = da7213_audio_map, @@ -2175,6 +2214,8 @@ static int da7213_i2c_probe(struct i2c_client *i2c) if (!da7213->fin_min_rate) return -EINVAL; + da7213->dev = &i2c->dev; + i2c_set_clientdata(i2c, da7213); /* Get required supplies */ @@ -2224,31 +2265,9 @@ static void da7213_i2c_remove(struct i2c_client *i2c) pm_runtime_disable(&i2c->dev); } -static int da7213_runtime_suspend(struct device *dev) -{ - struct da7213_priv *da7213 = dev_get_drvdata(dev); - - regcache_cache_only(da7213->regmap, true); - regcache_mark_dirty(da7213->regmap); - regulator_bulk_disable(DA7213_NUM_SUPPLIES, da7213->supplies); - - return 0; -} - -static int da7213_runtime_resume(struct device *dev) -{ - struct da7213_priv *da7213 = dev_get_drvdata(dev); - int ret; - - ret = regulator_bulk_enable(DA7213_NUM_SUPPLIES, da7213->supplies); - if (ret < 0) - return ret; - regcache_cache_only(da7213->regmap, false); - return regcache_sync(da7213->regmap); -} - -static DEFINE_RUNTIME_DEV_PM_OPS(da7213_pm, da7213_runtime_suspend, - da7213_runtime_resume, NULL); +static const struct dev_pm_ops da7213_pm = { + RUNTIME_PM_OPS(da7213_runtime_suspend, da7213_runtime_resume, NULL) +}; static const struct i2c_device_id da7213_i2c_id[] = { { "da7213" }, diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h index b9ab791d6b88..29cbf0eb6124 100644 --- a/sound/soc/codecs/da7213.h +++ b/sound/soc/codecs/da7213.h @@ -595,6 +595,7 @@ enum da7213_supplies { /* Codec private data */ struct da7213_priv { struct regmap *regmap; + struct device *dev; struct mutex ctrl_lock; struct regulator_bulk_data supplies[DA7213_NUM_SUPPLIES]; struct clk *mclk; From 6b6eddc63ce871897d3a5bc4f8f593e698aef104 Mon Sep 17 00:00:00 2001 From: Haotian Zhang Date: Wed, 5 Nov 2025 14:22:46 +0800 Subject: [PATCH 3/5] ASoC: cs4271: Fix regulator leak on probe failure The probe function enables regulators at the beginning but fails to disable them in its error handling path. If any operation after enabling the regulators fails, the probe will exit with an error, leaving the regulators permanently enabled, which could lead to a resource leak. Add a proper error handling path to call regulator_bulk_disable() before returning an error. Fixes: 9a397f473657 ("ASoC: cs4271: add regulator consumer support") Signed-off-by: Haotian Zhang Reviewed-by: Charles Keepax Link: https://patch.msgid.link/20251105062246.1955-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown --- sound/soc/codecs/cs4271.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index 6a3cca3d26c7..ead447a5da7f 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -581,17 +581,17 @@ static int cs4271_component_probe(struct snd_soc_component *component) ret = regcache_sync(cs4271->regmap); if (ret < 0) - return ret; + goto err_disable_regulator; ret = regmap_update_bits(cs4271->regmap, CS4271_MODE2, CS4271_MODE2_PDN | CS4271_MODE2_CPEN, CS4271_MODE2_PDN | CS4271_MODE2_CPEN); if (ret < 0) - return ret; + goto err_disable_regulator; ret = regmap_update_bits(cs4271->regmap, CS4271_MODE2, CS4271_MODE2_PDN, 0); if (ret < 0) - return ret; + goto err_disable_regulator; /* Power-up sequence requires 85 uS */ udelay(85); @@ -601,6 +601,10 @@ static int cs4271_component_probe(struct snd_soc_component *component) CS4271_MODE2_MUTECAEQUB); return 0; + +err_disable_regulator: + regulator_bulk_disable(ARRAY_SIZE(cs4271->supplies), cs4271->supplies); + return ret; } static void cs4271_component_remove(struct snd_soc_component *component) From 1a58d865f423f4339edf59053e496089075fa950 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Wed, 29 Oct 2025 15:17:58 +0800 Subject: [PATCH 4/5] ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present() The bus_find_device_by_name() function returns a device pointer with an incremented reference count, but the original code was missing put_device() calls in some return paths, leading to reference count leaks. Fix this by ensuring put_device() is called before function exit after bus_find_device_by_name() succeeds This follows the same pattern used elsewhere in the kernel where bus_find_device_by_name() is properly paired with put_device(). Found via static analysis and code review. Fixes: 4f8ef33dd44a ("ASoC: soc_sdw_utils: skip the endpoint that doesn't present") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin Link: https://patch.msgid.link/20251029071804.8425-1-linmq006@gmail.com Signed-off-by: Mark Brown --- sound/soc/sdw_utils/soc_sdw_utils.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/sound/soc/sdw_utils/soc_sdw_utils.c b/sound/soc/sdw_utils/soc_sdw_utils.c index f7c8c16308de..3848c7df1916 100644 --- a/sound/soc/sdw_utils/soc_sdw_utils.c +++ b/sound/soc/sdw_utils/soc_sdw_utils.c @@ -1277,7 +1277,7 @@ static int is_sdca_endpoint_present(struct device *dev, struct sdw_slave *slave; struct device *sdw_dev; const char *sdw_codec_name; - int i; + int ret, i; dlc = kzalloc(sizeof(*dlc), GFP_KERNEL); if (!dlc) @@ -1307,13 +1307,16 @@ static int is_sdca_endpoint_present(struct device *dev, } slave = dev_to_sdw_dev(sdw_dev); - if (!slave) - return -EINVAL; + if (!slave) { + ret = -EINVAL; + goto put_device; + } /* Make sure BIOS provides SDCA properties */ if (!slave->sdca_data.interface_revision) { dev_warn(&slave->dev, "SDCA properties not found in the BIOS\n"); - return 1; + ret = 1; + goto put_device; } for (i = 0; i < slave->sdca_data.num_functions; i++) { @@ -1322,7 +1325,8 @@ static int is_sdca_endpoint_present(struct device *dev, if (dai_type == dai_info->dai_type) { dev_dbg(&slave->dev, "DAI type %d sdca function %s found\n", dai_type, slave->sdca_data.function[i].name); - return 1; + ret = 1; + goto put_device; } } @@ -1330,7 +1334,11 @@ static int is_sdca_endpoint_present(struct device *dev, "SDCA device function for DAI type %d not supported, skip endpoint\n", dai_info->dai_type); - return 0; + ret = 0; + +put_device: + put_device(sdw_dev); + return ret; } int asoc_sdw_parse_sdw_endpoints(struct snd_soc_card *card, From 84f5526e4dce0a44d050ceb1b1bf21d43016d91b Mon Sep 17 00:00:00 2001 From: Niranjan H Y Date: Thu, 30 Oct 2025 20:46:37 +0530 Subject: [PATCH 5/5] ASoC: tas2783A: Fix issues in firmware parsing During firmware download, if the size of the firmware is too small, it wrongly assumes the firmware download is successful. If there is size mismatch with chunk's header, invalid memory is accessed. Fix these issues by throwing error during these cases. Fixes: 4cc9bd8d7b32 (ASoc: tas2783A: Add soundwire based codec driver) Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202510291226.2R3fbYNh-lkp@intel.com/ Signed-off-by: Niranjan H Y Link: https://patch.msgid.link/20251030151637.566-1-niranjan.hy@ti.com Signed-off-by: Mark Brown --- sound/soc/codecs/tas2783-sdw.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tas2783-sdw.c b/sound/soc/codecs/tas2783-sdw.c index 1fb4227b711e..e273b80d033e 100644 --- a/sound/soc/codecs/tas2783-sdw.c +++ b/sound/soc/codecs/tas2783-sdw.c @@ -762,10 +762,17 @@ static void tas2783_fw_ready(const struct firmware *fmw, void *context) goto out; } - mutex_lock(&tas_dev->pde_lock); img_sz = fmw->size; buf = fmw->data; offset += FW_DL_OFFSET; + if (offset >= (img_sz - FW_FL_HDR)) { + dev_err(tas_dev->dev, + "firmware is too small"); + ret = -EINVAL; + goto out; + } + + mutex_lock(&tas_dev->pde_lock); while (offset < (img_sz - FW_FL_HDR)) { memset(&hdr, 0, sizeof(hdr)); offset += read_header(&buf[offset], &hdr); @@ -776,6 +783,14 @@ static void tas2783_fw_ready(const struct firmware *fmw, void *context) /* size also includes the header */ file_blk_size = hdr.length - FW_FL_HDR; + /* make sure that enough data is there */ + if (offset + file_blk_size > img_sz) { + ret = -EINVAL; + dev_err(tas_dev->dev, + "corrupt firmware file"); + break; + } + switch (hdr.file_id) { case 0: ret = sdw_nwrite_no_pm(tas_dev->sdw_peripheral, @@ -808,7 +823,8 @@ static void tas2783_fw_ready(const struct firmware *fmw, void *context) break; } mutex_unlock(&tas_dev->pde_lock); - tas2783_update_calibdata(tas_dev); + if (!ret) + tas2783_update_calibdata(tas_dev); out: if (!ret)