github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-09-24 06:24:02 +02:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

riscv: dts: spacemit: k1: Add Banana Pi BPI-CM6 IO board

Browse Source 
The Banana Pi BPI-CM6 IO board combines the BPI-CM6 compute module with
an IO carrier board. The core module integrates the SpacemiT K1 SoC,
PMIC, DDR, eMMC, the eth0 PHY, and wireless connectivity. The companion
IO carrier board extends it by providing the eth1 PHY and exposing
standard interfaces, including dual Gigabit Ethernet, MicroSD, two USB-A
ports, a USB Type-C port, two PCIe M.2 slots, and a serial console.

The board also has two I2C EEPROMs. One is on the core module, which
stores factory manufacturing data and is marked read-only. The other is
on the carrier board, which is shipped unprogrammed and left writable
for evaluation purposes.

Add initial support for UART console, eMMC, SD card, I2C, EEPROMs,
PCIe, USB, and dual Ethernet interfaces.

Link: https://docs.banana-pi.org/en/BPI-CM6/BananaPi_BPI-CM6
Reviewed-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Tested-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260712-bpi-cm6-v3-3-8d1e2045179d@pigmoral.tech
Signed-off-by: Yixun Lan <dlan@kernel.org>
This commit is contained in:
Junhui Liu 2026-07-12 12:00:03 +08:00 committed by Yixun Lan
parent 8270311d70
commit 46a8c01700
3 changed files with 395 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/riscv/boot/dts/spacemit/Makefile
View File

@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-cm6-io.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-f3.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb

177
arch/riscv/boot/dts/spacemit/k1-bananapi-cm6-io.dts Normal file
View File

@ -0,0 +1,177 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright (C) 2026 Junhui Liu <junhui.liu@pigmoral.tech>
*/
#include "k1-bananapi-cm6.dtsi"
#include <dt-bindings/leds/common.h>
/ {
model = "Banana Pi BPI-CM6 IO Board";
compatible = "bananapi,bpi-cm6-io", "bananapi,bpi-cm6", "spacemit,k1";
aliases {
ethernet0 = &eth0;
ethernet1 = &eth1;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led0 {
color = <LED_COLOR_ID_RED>;
gpios = <&gpio K1_GPIO(96) GPIO_ACTIVE_LOW>;
};
led1 {
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio K1_GPIO(97) GPIO_ACTIVE_LOW>;
};
};
pcie_vcc_3v3: regulator-pcie-vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "NGFF_KEYM_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
usb_vbus_5v: regulator-usb-vbus-5v {
compatible = "regulator-fixed";
regulator-name = "VBUS_A_B";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio K1_GPIO(124) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sd_vcc_3v3: regulator-sd-vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3VS_CARD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio K1_GPIO(127) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&combo_phy {
status = "okay";
};
&eth0 {
status = "okay";
};
&eth1 {
nvmem-cells = <&mac_address 1>;
nvmem-cell-names = "mac-address";
phy-handle = <&rgmii1>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac1_cfg>;
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <250>;
status = "okay";
mdio-bus {
#address-cells = <0x1>;
#size-cells = <0x0>;
reset-gpios = <&gpio K1_GPIO(46) GPIO_ACTIVE_LOW>;
reset-delay-us = <10000>;
reset-post-delay-us = <100000>;
rgmii1: phy@1 {
reg = <0x1>;
};
};
};
&i2c2 {
eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
vcc-supply = <&buck3_1v8>;
pagesize = <16>;
size = <1024>;
};
};
&pcie1_phy {
pinctrl-names = "default";
pinctrl-0 = <&pcie1_3_cfg>;
status = "okay";
};
&pcie1_port {
phys = <&pcie1_phy>;
vpcie3v3-supply = <&pcie_vcc_3v3>;
};
&pcie1 {
status = "okay";
};
&pcie2_phy {
pinctrl-names = "default";
pinctrl-0 = <&pcie2_4_cfg>;
status = "okay";
};
&pcie2_port {
phys = <&pcie2_phy>;
vpcie3v3-supply = <&pcie_vcc_3v3>;
};
&pcie2 {
status = "okay";
};
&qspi {
pinctrl-names = "default";
pinctrl-0 = <&qspi_cfg>;
status = "okay";
};
&sdhci0 {
pinctrl-names = "default", "uhs";
pinctrl-0 = <&mmc1_cfg>;
pinctrl-1 = <&mmc1_uhs_cfg>;
bus-width = <4>;
cd-gpios = <&gpio K1_GPIO(80) (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
no-mmc;
no-sdio;
disable-wp;
cap-sd-highspeed;
vmmc-supply = <&sd_vcc_3v3>;
vqmmc-supply = <&aldo1>;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_2_cfg>;
status = "okay";
};
&usbphy2 {
status = "okay";
};
&usb_dwc3 {
dr_mode = "host";
vbus-supply = <&usb_vbus_5v>;
status = "okay";
};

217
arch/riscv/boot/dts/spacemit/k1-bananapi-cm6.dtsi Normal file
View File

@ -0,0 +1,217 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright (C) 2026 Junhui Liu <junhui.liu@pigmoral.tech>
*/
#include "k1.dtsi"
#include "k1-pinctrl.dtsi"
/ {
model = "Banana Pi BPI-CM6 Module";
compatible = "bananapi,bpi-cm6", "spacemit,k1";
aliases {
i2c2 = &i2c2;
i2c8 = &i2c8;
};
reg_vcc_4v: regulator-vcc-4v {
compatible = "regulator-fixed";
regulator-name = "VCC4V0_SYS";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <4000000>;
regulator-boot-on;
regulator-always-on;
};
};
&emmc {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
no-sd;
no-sdio;
status = "okay";
};
&eth0 {
nvmem-cells = <&mac_address 0>;
nvmem-cell-names = "mac-address";
phy-handle = <&rgmii0>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_cfg>;
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
mdio-bus {
#address-cells = <0x1>;
#size-cells = <0x0>;
reset-gpios = <&gpio K1_GPIO(45) GPIO_ACTIVE_LOW>;
reset-delay-us = <10000>;
reset-post-delay-us = <100000>;
rgmii0: phy@1 {
reg = <0x1>;
};
};
};
&pdma {
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_0_cfg>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
vcc-supply = <&buck3_1v8>;
pagesize = <16>;
read-only;
size = <256>;
nvmem-layout {
compatible = "onie,tlv-layout";
mac_address: mac-address {
#nvmem-cell-cells = <1>;
};
num-macs {
};
serial-number {
};
};
};
};
&i2c8 {
pinctrl-names = "default";
pinctrl-0 = <&i2c8_cfg>;
status = "okay";
pmic@41 {
compatible = "spacemit,p1";
reg = <0x41>;
interrupts = <64>;
vin1-supply = <&reg_vcc_4v>;
vin2-supply = <&reg_vcc_4v>;
vin3-supply = <&reg_vcc_4v>;
vin4-supply = <&reg_vcc_4v>;
vin5-supply = <&reg_vcc_4v>;
vin6-supply = <&reg_vcc_4v>;
aldoin-supply = <&reg_vcc_4v>;
dldoin1-supply = <&buck5>;
dldoin2-supply = <&buck5>;
regulators {
buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck3_1v8: buck3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck5: buck5 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
buck6 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3450000>;
regulator-ramp-delay = <5000>;
regulator-always-on;
};
aldo1: aldo1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
};
aldo2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
aldo3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
aldo4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
dldo1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
};
dldo2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
dldo3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
dldo4 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
};
dldo5 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
dldo6 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
regulator-always-on;
};
dldo7 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <3400000>;
};
};
};
};