mirror of
https://github.com/torvalds/linux.git
synced 2026-06-07 14:04:54 +02:00
arm64: dts: rockchip: add dts file for RK3399Pro evb v10
Add support for RK3399Pro evb rev10. Change-Id: Iaf431064238ff689004218c176afd4fad7d63eb7 Signed-off-by: Zhou weixin <zwx@rock-chips.com>
This commit is contained in:
Zhou weixin
Tao Huang
parent
2425f29223
commit
4450fa71d4
|
|
@ -119,6 +119,10 @@ Rockchip platforms device tree bindings
|
|||
Required root node properties:
|
||||
- compatible = "rockchip,rock960", "rockchip,rk3399";
|
||||
|
||||
- Rockchip RK3399pro evb:
|
||||
Required root node properties:
|
||||
- compatible = "rockchip,rk3399pro-evb-v10", "rockchip,rk3399pro";
|
||||
|
||||
- Rockchip RK3326 f863 board:
|
||||
Required root node properties:
|
||||
- compatible = "rockchip,rk3326-863-lp3-v10", "rockchip,rk3326";
|
||||
|
|
|
|||
|
|
@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-tve1030g.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-tve1205g.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-videostrong-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-vr-android.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-evb-v10.dtb
|
||||
|
||||
always := $(dtb-y)
|
||||
subdir-y := $(dts-dirs)
|
||||
|
|
|
|||
910
arch/arm64/boot/dts/rockchip/rk3399pro-evb-v10.dts
Normal file
910
arch/arm64/boot/dts/rockchip/rk3399pro-evb-v10.dts
Normal file
|
|
@ -0,0 +1,910 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
// Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/display/drm_mipi_dsi.h>
|
||||
#include <dt-bindings/sensor-dev.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399pro.dtsi"
|
||||
#include "rk3399-android.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
#include "rk3399-vop-clk-set.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "rockchip,rk3399pro-evb-v10", "rockchip,rk3399pro";
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 2>;
|
||||
io-channel-names = "buttons";
|
||||
poll-interval = <100>;
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
esc-key {
|
||||
linux,code = <KEY_ESC>;
|
||||
label = "esc";
|
||||
press-threshold-microvolt = <1310000>;
|
||||
};
|
||||
|
||||
menu-key {
|
||||
linux,code = <KEY_MENU>;
|
||||
label = "menu";
|
||||
press-threshold-microvolt = <987000>;
|
||||
};
|
||||
|
||||
home-key {
|
||||
linux,code = <KEY_HOME>;
|
||||
label = "home";
|
||||
press-threshold-microvolt = <624000>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
label = "volume down";
|
||||
press-threshold-microvolt = <300000>;
|
||||
};
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
label = "volume up";
|
||||
press-threshold-microvolt = <17000>;
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
brightness-levels = <
|
||||
0 20 20 21 21 22 22 23
|
||||
23 24 24 25 25 26 26 27
|
||||
27 28 28 29 29 30 30 31
|
||||
31 32 32 33 33 34 34 35
|
||||
35 36 36 37 37 38 38 39
|
||||
40 41 42 43 44 45 46 47
|
||||
48 49 50 51 52 53 54 55
|
||||
56 57 58 59 60 61 62 63
|
||||
64 65 66 67 68 69 70 71
|
||||
72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87
|
||||
88 89 90 91 92 93 94 95
|
||||
96 97 98 99 100 101 102 103
|
||||
104 105 106 107 108 109 110 111
|
||||
112 113 114 115 116 117 118 119
|
||||
120 121 122 123 124 125 126 127
|
||||
128 129 130 131 132 133 134 135
|
||||
136 137 138 139 140 141 142 143
|
||||
144 145 146 147 148 149 150 151
|
||||
152 153 154 155 156 157 158 159
|
||||
160 161 162 163 164 165 166 167
|
||||
168 169 170 171 172 173 174 175
|
||||
176 177 178 179 180 181 182 183
|
||||
184 185 186 187 188 189 190 191
|
||||
192 193 194 195 196 197 198 199
|
||||
200 201 202 203 204 205 206 207
|
||||
208 209 210 211 212 213 214 215
|
||||
216 217 218 219 220 221 222 223
|
||||
224 225 226 227 228 229 230 231
|
||||
232 233 234 235 236 237 238 239
|
||||
240 241 242 243 244 245 246 247
|
||||
248 249 250 251 252 253 254 255
|
||||
>;
|
||||
default-brightness-level = <200>;
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
panel: panel {
|
||||
compatible = "simple-panel";
|
||||
backlight = <&backlight>;
|
||||
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
prepare-delay-ms = <20>;
|
||||
enable-delay-ms = <20>;
|
||||
reset-delay-ms = <20>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
|
||||
timing0: timing0 {
|
||||
clock-frequency = <200000000>;
|
||||
hactive = <1536>;
|
||||
vactive = <2048>;
|
||||
hfront-porch = <12>;
|
||||
hsync-len = <16>;
|
||||
hback-porch = <48>;
|
||||
vfront-porch = <8>;
|
||||
vsync-len = <4>;
|
||||
vback-porch = <8>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <0>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&edp_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "rockchip,rk809-codec";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Mic Jack",
|
||||
"Headphone", "Headphone Jack";
|
||||
simple-audio-card,routing =
|
||||
"Mic Jack", "MICBIAS1",
|
||||
"IN1P", "Mic Jack",
|
||||
"Headphone Jack", "HPOL",
|
||||
"Headphone Jack", "HPOR";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
rk_headset {
|
||||
compatible = "rockchip_headset";
|
||||
headset_gpio = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
io-channels = <&saradc 3>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vccsys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6255";
|
||||
sdio_vref = <1800>;
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
clocks = <&rk809 1>;
|
||||
clock-names = "ext_clock";
|
||||
uart_rts_gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart0_rts>;
|
||||
pinctrl-1 = <&uart0_gpios>;
|
||||
BT,reset_gpio = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&cdn_dp {
|
||||
status = "okay";
|
||||
extcon = <&fusb0>;
|
||||
phys = <&tcphy0_dp>;
|
||||
};
|
||||
|
||||
&dp_in_vopb {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&edp {
|
||||
status = "okay";
|
||||
force-hpd;
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
edp_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edp_in_vopl {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-supply = <&vcc_phy>;
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
mali-supply = <&vdd_gpu>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_dp_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in_vopb {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <180>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
vdd_cpu_b: syr837@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: syr828@41 {
|
||||
compatible = "silergy,syr828";
|
||||
status = "okay";
|
||||
reg = <0x41>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <735000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PD0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-name = "vdd_center";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-initial-mode = <0x1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_0v9: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vcca_0v9";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9_soc: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-name = "vcc0v9_soc";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
vdd1v5_dvp: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
|
||||
regulator-name = "vdd1v5_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
regulator-name = "vcc5v0";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_3v3: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-name = "vccio_3v3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
rk809_codec: codec {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
||||
clock-names = "mclk";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s_8ch_mclk>;
|
||||
hp-volume = <20>;
|
||||
spk-volume = <3>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <140>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
|
||||
mpu6500@68 {
|
||||
status = "okay";
|
||||
compatible = "invensense,mpu6500";
|
||||
reg = <0x68>;
|
||||
irq-gpio = <&gpio1 RK_PC6 IRQ_TYPE_EDGE_RISING>;
|
||||
mpu-int_config = <0x10>;
|
||||
mpu-level_shifter = <0>;
|
||||
mpu-orientation = <0 1 0 1 0 0 0 0 1>;
|
||||
orientation-x= <1>;
|
||||
orientation-y= <0>;
|
||||
orientation-z= <0>;
|
||||
mpu-debug = <1>;
|
||||
};
|
||||
|
||||
sensor@0d {
|
||||
status = "okay";
|
||||
compatible = "ak8963";
|
||||
reg = <0x0d>;
|
||||
type = <SENSOR_TYPE_COMPASS>;
|
||||
irq-gpio = <&gpio0 RK_PA5 IRQ_TYPE_EDGE_RISING>;
|
||||
irq_enable = <0>;
|
||||
poll_delay_ms = <30>;
|
||||
layout = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <345>;
|
||||
i2c-scl-falling-time-ns = <11>;
|
||||
|
||||
gsl3673: gsl3673@40 {
|
||||
compatible = "GSL,GSL3673";
|
||||
reg = <0x40>;
|
||||
screen_max_x = <1536>;
|
||||
screen_max_y = <2048>;
|
||||
irq_gpio_number = <&gpio1 RK_PC7 IRQ_TYPE_LEVEL_LOW>;
|
||||
rst_gpio_number = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <150>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <345>;
|
||||
i2c-scl-falling-time-ns = <11>;
|
||||
clock-frequency = <100000>;
|
||||
|
||||
fusb0: fusb30x@22 {
|
||||
compatible = "fairchild,fusb302";
|
||||
reg = <0x22>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb0_int>;
|
||||
vbus-5v-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
int-n-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
status = "okay";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
bt656-supply = <&vcca_1v8>;
|
||||
audio-supply = <&vcca_1v8>;
|
||||
sdmmc-supply = <&vccio_sd>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
&isp0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&isp1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&isp0_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&isp1_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmu1830-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rk_key {
|
||||
status = "okay";
|
||||
compatible = "rockchip,key";
|
||||
io-channels = <&saradc 1>;
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <114>;
|
||||
label = "volume up";
|
||||
rockchip,adc_value = <170>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <115>;
|
||||
label = "volume down";
|
||||
rockchip,adc_value = <1>;
|
||||
};
|
||||
|
||||
power-key {
|
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <116>;
|
||||
label = "power";
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
&rockchip_suspend {
|
||||
status = "okay";
|
||||
rockchip,sleep-debug-en = <1>;
|
||||
rockchip,sleep-mode-config = <
|
||||
(0
|
||||
| RKPM_SLP_ARMPD
|
||||
| RKPM_SLP_PERILPPD
|
||||
| RKPM_SLP_DDR_RET
|
||||
| RKPM_SLP_PLLPD
|
||||
| RKPM_SLP_CENTER_PD
|
||||
| RKPM_SLP_OSC_DIS
|
||||
| RKPM_SLP_AP_PWROFF
|
||||
)
|
||||
>;
|
||||
rockchip,wakeup-config = <RKPM_GPIO_WKUP_EN>;
|
||||
rockchip,pwm-regulator-config = <PWM2_REGULATOR_EN>;
|
||||
rockchip,power-ctrl =
|
||||
<&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
mali-supply = <&vdd_gpu>;
|
||||
};
|
||||
|
||||
&route_dsi {
|
||||
status = "okay";
|
||||
logo,mode = "center";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
extcon = <&fusb0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
extcon = <&fusb0>;
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
extcon = <&fusb0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
assigned-clocks = <&cru DCLK_VOP0_DIV>;
|
||||
assigned-clock-parents = <&cru PLL_CPLL>;
|
||||
};
|
||||
|
||||
&vopl {
|
||||
assigned-clocks = <&cru DCLK_VOP1_DIV>;
|
||||
assigned-clock-parents = <&cru PLL_VPLL>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
fusb30x {
|
||||
fusb0_int: fusb0-int {
|
||||
rockchip,pins =
|
||||
<1 RK_PA2 0 &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins =
|
||||
<3 RK_PD7 0 &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd_rst {
|
||||
lcd_rst_gpio: lcd-rst-gpio {
|
||||
rockchip,pins =
|
||||
<3 RK_PA4 0 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<1 RK_PD0 0 &pcfg_pull_up>;
|
||||
};
|
||||
vsel1_gpio: vsel1-gpio {
|
||||
rockchip,pins =
|
||||
<1 RK_PC1 0 &pcfg_pull_down>;
|
||||
};
|
||||
vsel2_gpio: vsel2-gpio {
|
||||
rockchip,pins =
|
||||
<1 RK_PB6 0 &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<2 RK_PD3 0 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
tp_irq {
|
||||
tp_irq_gpio: tp-irq-gpio {
|
||||
rockchip,pins =
|
||||
<3 RK_PB0 0 &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins =
|
||||
<4 RK_PD1 0 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart0_gpios: uart0-gpios {
|
||||
rockchip,pins =
|
||||
<2 RK_PC3 0 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user