scsi: lpfc: Fix double word in comments

Remove the repeated word "the" in comments.

[mkp: fixed additional typos in the changed lines]

Link: https://lore.kernel.org/r/20230217083046.4090-1-liubo03@inspur.com
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc_attr.c

@@ -2541,7 +2541,7 @@ lpfc_sriov_hw_max_virtfn_show(struct device *dev,
 
 /**
  * lpfc_enable_bbcr_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
  * @val: integer attribute value.
  *
  * Description:
@@ -2632,7 +2632,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
  * takes a default argument, a minimum and maximum argument.
  *
  * lpfc_##attr##_init: Initializes an attribute.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
  * @val: integer attribute value.
  *
  * Validates the min and max values then sets the adapter config field
@@ -2665,7 +2665,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
  * into a function with the name lpfc_hba_queue_depth_set
  *
  * lpfc_##attr##_set: Sets an attribute value.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
  * @val: integer attribute value.
  *
  * Description:
@@ -2794,7 +2794,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
  * lpfc_##attr##_init: validates the min and max values then sets the
  * adapter config field accordingly, or uses the default if out of range
  * and prints an error message.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
  * @val: integer attribute value.
  *
  * Returns:
@@ -2826,7 +2826,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
  * lpfc_##attr##_set: validates the min and max values then sets the
  * adapter config field if in the valid range. prints error message
  * and does not set the parameter if invalid.
- * @phba: pointer the the adapter structure.
+ * @phba: pointer to the adapter structure.
  * @val:	integer attribute value.
  *
  * Returns:

drivers/scsi/lpfc/lpfc_els.c

@@ -8886,7 +8886,7 @@ lpfc_els_rcv_rtv(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
  * @rrq: Pointer to the rrq struct.
  *
  * Build a ELS RRQ command and send it to the target. If the issue_iocb is
- * Successful the the completion handler will clear the RRQ.
+ * successful, the completion handler will clear the RRQ.
  *
  * Return codes
  *   0 - Successfully sent rrq els iocb.

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -2459,7 +2459,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
  * @phba: pointer to lpfc hba data structure.
  * @fcf_index: the index of the fcf record to update
  * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
- * flag so the the round robin slection for the particular priority level
+ * flag so the round robin selection for the particular priority level
  * will try a different fcf record that does not have this bit set.
  * If the fcf record is re-read for any reason this flag is cleared brfore
  * adding it to the priority list.

drivers/scsi/lpfc/lpfc_init.c

@@ -5501,7 +5501,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
 	bf_set(lpfc_mbx_read_top_link_spd, la,
 	       (bf_get(lpfc_acqe_link_speed, acqe_link)));
 
-	/* Fake the the following irrelvant fields */
+	/* Fake the following irrelevant fields */
 	bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
 	bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
 	bf_set(lpfc_mbx_read_top_il, la, 0);
@@ -12548,7 +12548,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
 			/* Mark CPU as IRQ not assigned by the kernel */
 			cpup->flag |= LPFC_CPU_MAP_UNASSIGN;
 
-			/* If so, find a new_cpup thats on the the SAME
+			/* If so, find a new_cpup that is on the SAME
 			 * phys_id as cpup. start_cpu will start where we
 			 * left off so all unassigned entries don't get assgined
 			 * the IRQ of the first entry.

drivers/scsi/lpfc/lpfc_mbox.c

@@ -2509,7 +2509,7 @@ lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * information via a READ_FCF mailbox command. This mailbox command also is used
  * to indicate where received unsolicited frames from this FCF will be sent. By
  * default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * to the RQ ID passed in the @phba. This can be overridden by the caller for
  * more complicated setups.
  **/
 void
@@ -2577,7 +2577,7 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * information via a READ_FCF mailbox command. This mailbox command also is used
  * to indicate where received unsolicited frames from this FCF will be sent. By
  * default this routine will set up the FCF to forward all unsolicited frames
- * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * to the RQ ID passed in the @phba. This can be overridden by the caller for
  * more complicated setups.
  **/
 void

drivers/scsi/lpfc/lpfc_nvmet.c

@@ -1469,7 +1469,7 @@ lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba)
 	if (!infop)
 		return;
 
-	/* Cycle the the entire CPU context list for every MRQ */
+	/* Cycle the entire CPU context list for every MRQ */
 	for (i = 0; i < phba->cfg_nvmet_mrq; i++) {
 		for_each_present_cpu(j) {
 			infop = lpfc_get_ctx_list(phba, j, i);

drivers/scsi/lpfc/lpfc_sli.c

@@ -20804,7 +20804,7 @@ lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status,
  * the offset after the write object mailbox has completed. @size is used to
  * determine the end of the object and whether the eof bit should be set.
  *
- * Return 0 is successful and offset will contain the the new offset to use
+ * Return 0 is successful and offset will contain the new offset to use
  * for the next write.
  * Return negative value for error cases.
  **/