net: phy: fixed_phy: remove link gpio support

The only user of fixed_phy gpio functionality was here:
arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
Support for the switch on this board was migrated to phylink
(DSA - mv88e6xxx) years ago, so the functionality is unused now.
Therefore remove it.

Note: There is a very small risk that there's out-of-tree users
who use link gpio with a switch chip not handled by DSA.
However we care about in-tree device trees only.

Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/75295a9a-e162-432c-ba9f-5d3125078788@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Heiner Kallweit 2025-09-04 08:08:18 +02:00 committed by Jakub Kicinski
parent 16c610162d
commit 43a42b8516

View File

@ -17,7 +17,6 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/gpio/consumer.h>
#include <linux/idr.h>
#include <linux/netdevice.h>
#include <linux/linkmode.h>
@ -36,7 +35,6 @@ struct fixed_phy {
bool no_carrier;
int (*link_update)(struct net_device *, struct fixed_phy_status *);
struct list_head node;
struct gpio_desc *link_gpiod;
};
static struct fixed_mdio_bus platform_fmb = {
@ -62,12 +60,6 @@ int fixed_phy_change_carrier(struct net_device *dev, bool new_carrier)
}
EXPORT_SYMBOL_GPL(fixed_phy_change_carrier);
static void fixed_phy_update(struct fixed_phy *fp)
{
if (!fp->no_carrier && fp->link_gpiod)
fp->status.link = !!gpiod_get_value_cansleep(fp->link_gpiod);
}
static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
{
struct fixed_mdio_bus *fmb = bus->priv;
@ -82,9 +74,6 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
fp->link_update(fp->phydev->attached_dev,
&fp->status);
/* Check the GPIO for change in status */
fixed_phy_update(fp);
return swphy_read_reg(reg_num, &fp->status);
}
}
@ -125,9 +114,8 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
}
EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
static int fixed_phy_add_gpiod(unsigned int irq, int phy_addr,
const struct fixed_phy_status *status,
struct gpio_desc *gpiod)
static int __fixed_phy_add(unsigned int irq, int phy_addr,
const struct fixed_phy_status *status)
{
int ret;
struct fixed_mdio_bus *fmb = &platform_fmb;
@ -146,9 +134,6 @@ static int fixed_phy_add_gpiod(unsigned int irq, int phy_addr,
fp->addr = phy_addr;
fp->status = *status;
fp->link_gpiod = gpiod;
fixed_phy_update(fp);
list_add_tail(&fp->node, &fmb->phys);
@ -157,7 +142,7 @@ static int fixed_phy_add_gpiod(unsigned int irq, int phy_addr,
void fixed_phy_add(const struct fixed_phy_status *status)
{
fixed_phy_add_gpiod(PHY_POLL, 0, status, NULL);
__fixed_phy_add(PHY_POLL, 0, status);
}
EXPORT_SYMBOL_GPL(fixed_phy_add);
@ -171,8 +156,6 @@ static void fixed_phy_del(int phy_addr)
list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
if (fp->addr == phy_addr) {
list_del(&fp->node);
if (fp->link_gpiod)
gpiod_put(fp->link_gpiod);
kfree(fp);
ida_free(&phy_fixed_ida, phy_addr);
return;
@ -180,48 +163,10 @@ static void fixed_phy_del(int phy_addr)
}
}
#ifdef CONFIG_OF_GPIO
static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
{
struct device_node *fixed_link_node;
struct gpio_desc *gpiod;
if (!np)
return NULL;
fixed_link_node = of_get_child_by_name(np, "fixed-link");
if (!fixed_link_node)
return NULL;
/*
* As the fixed link is just a device tree node without any
* Linux device associated with it, we simply have obtain
* the GPIO descriptor from the device tree like this.
*/
gpiod = fwnode_gpiod_get_index(of_fwnode_handle(fixed_link_node),
"link", 0, GPIOD_IN, "mdio");
if (IS_ERR(gpiod) && PTR_ERR(gpiod) != -EPROBE_DEFER) {
if (PTR_ERR(gpiod) != -ENOENT)
pr_err("error getting GPIO for fixed link %pOF, proceed without\n",
fixed_link_node);
gpiod = NULL;
}
of_node_put(fixed_link_node);
return gpiod;
}
#else
static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
{
return NULL;
}
#endif
struct phy_device *fixed_phy_register(const struct fixed_phy_status *status,
struct device_node *np)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct gpio_desc *gpiod;
struct phy_device *phy;
int phy_addr;
int ret;
@ -229,17 +174,12 @@ struct phy_device *fixed_phy_register(const struct fixed_phy_status *status,
if (!fmb->mii_bus || fmb->mii_bus->state != MDIOBUS_REGISTERED)
return ERR_PTR(-EPROBE_DEFER);
/* Check if we have a GPIO associated with this fixed phy */
gpiod = fixed_phy_get_gpiod(np);
if (IS_ERR(gpiod))
return ERR_CAST(gpiod);
/* Get the next available PHY address, up to PHY_MAX_ADDR */
phy_addr = ida_alloc_max(&phy_fixed_ida, PHY_MAX_ADDR - 1, GFP_KERNEL);
if (phy_addr < 0)
return ERR_PTR(phy_addr);
ret = fixed_phy_add_gpiod(PHY_POLL, phy_addr, status, gpiod);
ret = __fixed_phy_add(PHY_POLL, phy_addr, status);
if (ret < 0) {
ida_free(&phy_fixed_ida, phy_addr);
return ERR_PTR(ret);