From 6db1aaf4d9735e04f6f310db6410d1dcf340a749 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Fri, 4 Oct 2019 00:21:30 +0200 Subject: [PATCH 01/22] arm64: dts: allwinner: a64: orangepi-win: Enable audio codec This patch enables internal audio codec on OrangePi Win board by enabling all relevant nodes and adding appropriate routing. Board has on-board microphone (MIC1) and 3.5 mm jack with stereo audio and microphone (MIC2). Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard --- .../dts/allwinner/sun50i-a64-orangepi-win.dts | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 04446e4716c4..f54a415f2e3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -114,6 +114,19 @@ wifi_pwrseq: wifi_pwrseq { }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -333,6 +346,22 @@ &simplefb_hdmi { vcc-hdmi-supply = <®_dldo1>; }; +&sound { + status = "okay"; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "MIC2", "Microphone Jack", + "Onboard Microphone", "MBIAS", + "MIC1", "Onboard Microphone"; +}; + &spi0 { status = "okay"; From cd380e0d00b2b21506f9319a626b6205e9d64aae Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Mon, 7 Oct 2019 22:31:51 +0200 Subject: [PATCH 02/22] arm64: dts: allwinner: h6: Add pin configs for uart1 Orange Pi 3 uses UART1 for bluetooth. Add pinconfigs so that we can use them. Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 4020a1aafa3e..0754f01fd731 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -299,6 +299,16 @@ uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; }; + + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; }; gic: interrupt-controller@3021000 { From 351170463471d2037aa034625d05f185e6d85f80 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Mon, 7 Oct 2019 22:31:52 +0200 Subject: [PATCH 03/22] arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth The board contains AP6256 WiFi/BT module that has its bluetooth part connected to SoC's UART1 port. Enable this port, and add node for the bluetooth device. Bluetooth part is named bcm4345c5. You'll need a BCM4345C5.hcd firmware file that can be found in the Xulongs's repository for H6: https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 The driver expects the firmware at the following path relative to the firmware directory: brcm/BCM4345C5.hcd Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard --- .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index eb379cd402ac..2557cc6c8d50 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -15,6 +15,7 @@ / { aliases { serial0 = &uart0; + serial1 = &uart1; }; chosen { @@ -269,6 +270,24 @@ &uart0 { status = "okay"; }; +/* There's the BT part of the AP6256 connected to that UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; + &usb2otg { /* * This board doesn't have a controllable VBUS even though it From 13de0f0a4919ac878d597e9702a2942a1a3b62e8 Mon Sep 17 00:00:00 2001 From: Alistair Francis Date: Sat, 12 Oct 2019 13:05:24 -0700 Subject: [PATCH 04/22] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 Follow what the sun50i-a64-pine64.dts does and expose all 5 serial connections. Signed-off-by: Alistair Francis Signed-off-by: Maxime Ripard --- .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index e6fb9683f213..0c484270edb2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -55,6 +55,10 @@ / { aliases { ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { @@ -204,6 +208,27 @@ &uart0 { status = "okay"; }; +/* On Pi-2 connector */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Euler connector */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Euler connector, RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + &usb_otg { dr_mode = "host"; status = "okay"; From 27b705fbf699841f67eaa39154a1d0a5580d3c2b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 16 Oct 2019 12:48:05 +0200 Subject: [PATCH 05/22] ARM: dts: sun9i: Add missing watchdog clocks The watchdog has a clock, but it wasn't always listed. Add it to the devicetree where it's missing. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index c34d505c7efe..6fb4297b3531 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -942,6 +942,7 @@ wdt: watchdog@6000ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = ; + clocks = <&osc24M>; }; pio: pinctrl@6000800 { @@ -1149,6 +1150,7 @@ r_wdt: watchdog@8001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = ; + clocks = <&osc24M>; }; prcm@8001400 { From a0365c09b582410f15fa2b669ebe1e8c5c3a721a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 16 Oct 2019 12:48:20 +0200 Subject: [PATCH 06/22] ARM: dts: sun5i: olinuxino micro: Fix AT24 node name The node name in a device tree is supposed to be the class of the device, not its model (even if it's a pretty generic one). This was reported by the DT validation tools. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 7033a123c9a3..d6bb82c295f0 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -130,7 +130,7 @@ axp152: pmic@30 { &i2c1 { status = "okay"; - at24@50 { + eeprom@50 { compatible = "atmel,24c16"; pagesize = <16>; reg = <0x50>; From 0c25bfa7fac517958b8dd2fffb8ba4fb042e946a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Myl=C3=A8ne=20Josserand?= Date: Tue, 29 Oct 2019 01:58:06 +0100 Subject: [PATCH 07/22] ARM: dts: sun8i: a83t: a711: Add touchscreen node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable a FocalTech EDT-FT5x06 Polytouch touchscreen. Signed-off-by: Ondrej Jirman Signed-off-by: Mylène Josserand Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 568b90ece342..19f520252dc5 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -164,6 +164,22 @@ &ehci1 { status = "okay"; }; +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */ + reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */ + vcc-supply = <®_ldo_io0>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + &i2c1 { clock-frequency = <400000>; status = "okay"; From 4acc24bca17f5f05692656d865d844985abad18a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= Date: Wed, 30 Oct 2019 16:07:41 +0100 Subject: [PATCH 08/22] arm64: dts: allwinner: Add ARM Mali GPU node for H6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the mali gpu node to the H6 device-tree. Signed-off-by: Clément Péron Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 0754f01fd731..9c4140d6de64 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -149,6 +149,20 @@ video-codec@1c0e000 { allwinner,sram = <&ve_sram 1>; }; + gpu: gpu@1800000 { + compatible = "allwinner,sun50i-h6-mali", + "arm,mali-t720"; + reg = <0x01800000 0x4000>; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; + clock-names = "core", "bus"; + resets = <&ccu RST_BUS_GPU>; + status = "disabled"; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; From 8abc4c4a154f658ac1f928eb5ccd9cb4706b2f3d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= Date: Wed, 30 Oct 2019 16:07:42 +0100 Subject: [PATCH 09/22] arm64: dts: allwinner: Add mali GPU supply for H6 boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Enable and add supply to the Mali GPU node on all the H6 boards. Regarding the datasheet the maximum time for supply to reach its voltage is 32ms. Signed-off-by: Clément Péron Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 6 ++++++ arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 6 ++++++ arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 6 ++++++ arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 6 ++++++ 4 files changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 1d05d570142f..e5ed1d4bfef8 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -89,6 +89,11 @@ &emac { status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -225,6 +230,7 @@ reg_dcdca: dcdca { }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 2557cc6c8d50..b99e9db35d50 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -103,6 +103,11 @@ &ehci3 { status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -238,6 +243,7 @@ reg_dcdca: dcdca { }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index ec9b6a578e3f..df4cbd7ef96c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -55,6 +55,11 @@ &ehci3 { status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -163,6 +168,7 @@ reg_dcdca: dcdca { }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 30102daf83cc..74899ede00fb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -85,6 +85,11 @@ &de { status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -221,6 +226,7 @@ reg_dcdca: dcdca { }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; From a24607032359297c4d7cc629e9c52bb5159730b1 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 23 Oct 2019 22:05:05 +0200 Subject: [PATCH 10/22] dt-bindings: crypto: Add DT bindings documentation for sun8i-ce Crypto Engine This patch adds documentation for Device-Tree bindings for the Crypto Engine cryptographic accelerator driver. Reviewed-by: Rob Herring Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- .../bindings/crypto/allwinner,sun8i-ce.yaml | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml new file mode 100644 index 000000000000..2c459b8c76ff --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/allwinner,sun8i-ce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Crypto Engine driver + +maintainers: + - Corentin Labbe + +properties: + compatible: + enum: + - allwinner,sun8i-h3-crypto + - allwinner,sun8i-r40-crypto + - allwinner,sun50i-a64-crypto + - allwinner,sun50i-h5-crypto + - allwinner,sun50i-h6-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus clock + - description: Module clock + - description: MBus clock + minItems: 2 + maxItems: 3 + + clock-names: + items: + - const: bus + - const: mod + - const: ram + minItems: 2 + maxItems: 3 + + resets: + maxItems: 1 + +if: + properties: + compatible: + items: + const: allwinner,sun50i-h6-crypto +then: + properties: + clocks: + minItems: 3 + clock-names: + minItems: 3 +else: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include + #include + #include + + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-h3-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + From 96d8dec97b77520ff44f7f710de585cc3a2b5230 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 23 Oct 2019 22:05:06 +0200 Subject: [PATCH 11/22] ARM: dts: sun8i: R40: add crypto engine node The Crypto Engine is a hardware cryptographic offloader that supports many algorithms. It could be found on most Allwinner SoCs. This patch enables the Crypto Engine on the Allwinner R40 SoC Device-tree. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-r40.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index bde068111b85..98f288244af9 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -266,6 +266,15 @@ usbphy: phy@1c13400 { #phy-cells = <1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-r40-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + ehci1: usb@1c19000 { compatible = "allwinner,sun8i-r40-ehci", "generic-ehci"; reg = <0x01c19000 0x100>; From e7ef094aea65523121036ccad66b4b34919429ab Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 23 Oct 2019 22:05:07 +0200 Subject: [PATCH 12/22] ARM: dts: sun8i: H3: Add Crypto Engine node The Crypto Engine is a hardware cryptographic accelerator that supports many algorithms. It could be found on most Allwinner SoCs. This patch enables the Crypto Engine on the Allwinner H3 SoC Device-tree. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index e37c30e811d3..78356db14fbb 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -153,6 +153,15 @@ video-codec@1c0e000 { allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-h3-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; From 0f5fc158851b63fd145b1b105376b8976eb4934d Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 23 Oct 2019 22:05:08 +0200 Subject: [PATCH 13/22] arm64: dts: allwinner: sun50i: Add Crypto Engine node on A64 The Crypto Engine is a hardware cryptographic accelerator that supports many algorithms. It could be found on most Allwinner SoCs. This patch enables the Crypto Engine on the Allwinner A64 SoC Device-tree. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 69128a6dfc46..5daa398f9246 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -487,6 +487,15 @@ sid: eeprom@1c14000 { reg = <0x1c14000 0x400>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-a64-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; From 8002c454d446fcbd4ae24c901546e836ba083141 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 23 Oct 2019 22:05:09 +0200 Subject: [PATCH 14/22] arm64: dts: allwinner: sun50i: Add crypto engine node on H5 The Crypto Engine is a hardware cryptographic accelerator that supports many algorithms. It could be found on most Allwinner SoCs. This patch enables the Crypto Engine on the Allwinner H5 SoC Device-tree. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index f002a496d7cb..e92c4de5bf3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -127,6 +127,15 @@ video-codec@1c0e000 { allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-h5-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1e80000 { compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; reg = <0x01e80000 0x30000>; From 709b86ff01f57224798f68474c7c2080d115acee Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Wed, 23 Oct 2019 22:05:10 +0200 Subject: [PATCH 15/22] arm64: dts: allwinner: sun50i: Add Crypto Engine node on H6 The Crypto Engine is a hardware cryptographic accelerator that supports many algorithms. This patch enables the Crypto Engine on the Allwinner H6 SoC Device-tree. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 9c4140d6de64..4abfed2e9ff6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -163,6 +163,15 @@ gpu: gpu@1800000 { status = "disabled"; }; + crypto: crypto@1904000 { + compatible = "allwinner,sun50i-h6-crypto"; + reg = <0x01904000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CE>; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; From c4cf3f5cdda8d0164eda86977ea4a0a34801f20c Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 25 Oct 2019 20:51:27 +0200 Subject: [PATCH 16/22] ARM: dts: sun8i: a83t: Add Security System node The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG/RSA algorithms. It could be found on Allwinner SoC A80 and A83T This patch adds it on the Allwinner A83T SoC Device-tree. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a83t.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 523be6611c50..52e467c6808c 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -583,6 +583,15 @@ sid: eeprom@1c14000 { reg = <0x1c14000 0x400>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-a83t-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a83t-musb", "allwinner,sun8i-a33-musb"; From edabfce623fb1aceb8f4a2e0c53f9256b979223d Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 25 Oct 2019 20:51:28 +0200 Subject: [PATCH 17/22] ARM: dts: sun9i: a80: Add Security System node The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG/RSA algorithms. It could be found on Allwinner SoC A80 and A83T This patch adds it on the Allwinner A80 SoC Device-tree. Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun9i-a80.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 6fb4297b3531..0a0906072e76 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -452,6 +452,15 @@ cpucfg@1700000 { reg = <0x01700000 0x100>; }; + crypto: crypto@1c02000 { + compatible = "allwinner,sun9i-a80-crypto"; + reg = <0x01c02000 0x1000>; + interrupts = ; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; From 6d1aa40e109b6a30ce0ffa2dc56afc6442104986 Mon Sep 17 00:00:00 2001 From: Karl Palsson Date: Thu, 31 Oct 2019 23:11:02 +0000 Subject: [PATCH 18/22] ARM: dts: sunxi: h3/h5: add missing uart2 rts/cts pins uart1 and uart3 had existing pin definitions for the rts/cts pairs. Add definitions for uart2 as well. Signed-off-by: Karl Palsson Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index eba190b3f9de..8df29cd05b83 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -472,6 +472,11 @@ uart2_pins: uart2-pins { function = "uart2"; }; + uart2_rts_cts_pins: uart2-rts-cts-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + uart3_pins: uart3-pins { pins = "PA13", "PA14"; function = "uart3"; From 5878524ee09d1d798cc4a870f517ff2ec450632c Mon Sep 17 00:00:00 2001 From: Georgii Staroselskii Date: Fri, 1 Nov 2019 12:43:33 +0300 Subject: [PATCH 19/22] arm64: dts: allwinner: bluetooth for Emlid Neutis N5 The Emlid Neutis N5 board has AP6212 BT+WiFi chip. This patch is in line with 8558c6e21ceb ("ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board") and other commits that add Bluetooth support for similar boards. Signed-off-by: Georgii Staroselskii Signed-off-by: Maxime Ripard --- .../dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index 82f4b44d525f..5bec574fa108 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -23,6 +23,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -56,5 +58,16 @@ &mmc2 { &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; }; From 3f04e059245ee92cd6b4b5b0013d58ae89edc4bd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= Date: Sat, 2 Nov 2019 13:04:27 +0100 Subject: [PATCH 20/22] arm64: allwinner: h6: Enable GPU node for Tanix TX6 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Unlike other H6 boards, Tanix TX6 doesn't have a PMIC so we can enable the GPU without providing a specific power supply. Signed-off-by: Clément Péron Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index 7e7cb10e3d96..bccfe1e65b6a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -53,6 +53,10 @@ &ehci3 { status = "okay"; }; +&gpu { + status = "okay"; +}; + &hdmi { status = "okay"; }; From 4701fc6e5dd997b5831f7f5df77aac68aa9b59ff Mon Sep 17 00:00:00 2001 From: Karl Palsson Date: Fri, 1 Nov 2019 20:55:35 +0000 Subject: [PATCH 21/22] ARM: dts: sun8i: add FriendlyARM NanoPi Duo2 This is an Allwinner H3 based board, with 512MB ram, a USB OTG port, microsd slot, an onboard AP6212A wifi/bluetooth module, and a CSI connector. Full details and schematic available from vendor: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo2 Signed-off-by: Karl Palsson Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts | 174 +++++++++++++++++++++ 2 files changed, 175 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b21b3a64641a..3f13b88d3064 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1105,6 +1105,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-beelink-x2.dtb \ sun8i-h3-libretech-all-h3-cc.dtb \ sun8i-h3-mapleboard-mp130.dtb \ + sun8i-h3-nanopi-duo2.dtb \ sun8i-h3-nanopi-m1.dtb \ sun8i-h3-nanopi-m1-plus.dtb \ sun8i-h3-nanopi-neo.dtb \ diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts new file mode 100644 index 000000000000..c73f59900975 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Karl Palsson + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "FriendlyARM NanoPi Duo2"; + compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "nanopi:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + + status { + label = "nanopi:green:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + + k1 { + label = "k1"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */ + }; + }; + + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <50>; /* 4ms */ + + enable-active-high; + enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; + + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vdd_sys: vdd-sys { + compatible = "regulator-fixed"; + regulator-name = "vdd-sys"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; + }; + +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pa_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */ + shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + }; +}; + +&usb_otg { + status = "okay"; + dr_mode = "otg"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; From d79ccef07b36cf9e0bf57b24a7c580d1e5f4fc39 Mon Sep 17 00:00:00 2001 From: Karl Palsson Date: Fri, 1 Nov 2019 20:55:36 +0000 Subject: [PATCH 22/22] dt-bindings: arm: sunxi: add FriendlyARM NanoPi Duo2 Adds bindings for the newly added NanoPi Duo2 board. Signed-off-by: Karl Palsson Signed-off-by: Maxime Ripard --- Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 972b1e9ee804..8a1e38a1d7ab 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -211,6 +211,11 @@ properties: - const: friendlyarm,nanopi-a64 - const: allwinner,sun50i-a64 + - description: FriendlyARM NanoPi Duo2 + items: + - const: friendlyarm,nanopi-duo2 + - const: allwinner,sun8i-h3 + - description: FriendlyARM NanoPi M1 items: - const: friendlyarm,nanopi-m1