mirror of
https://github.com/torvalds/linux.git
synced 2026-05-22 06:01:53 +02:00
pinctrl: renesas: Fix save/restore on SoCs with pull-down only pins
If some bits in a pin Pull-Up control register (PUPR) control pin pull-down instead of pin pull-up, there are two pinmux_bias_reg entries: a first one with the puen field filled in, listing pins with pull-up functionality, and a second one with the pud field filled in, listing pins with pull-down functionality. On encountering the second entry, where puen is NULL, the for-loop terminates early, causing the remaining bias registers not to be saved/restored during PSCI system suspend. Fortunately this does not trigger on any supported system yet, as PSCI is only used on R-Car Gen3 and RZ/G2 systems, which all have separate pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD) registers. Avoid this ever becoming a problem by treating pinmux_bias_reg.puen and pinmux_bias_reg.pud the same. Note that a register controlling both pull-up and pull-down pins would be saved and restored twice, which is harmless. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/59d2fbddff685b6a7a82ff17d2b37633e30e8860.1633615652.git.geert+renesas@glider.be
This commit is contained in:
parent
ce34fb3cb4
commit
412da8c722
|
|
@ -675,8 +675,10 @@ static unsigned int sh_pfc_walk_regs(struct sh_pfc *pfc,
|
|||
do_reg(pfc, pfc->info->drive_regs[i].reg, n++);
|
||||
|
||||
if (pfc->info->bias_regs)
|
||||
for (i = 0; pfc->info->bias_regs[i].puen; i++) {
|
||||
do_reg(pfc, pfc->info->bias_regs[i].puen, n++);
|
||||
for (i = 0; pfc->info->bias_regs[i].puen ||
|
||||
pfc->info->bias_regs[i].pud; i++) {
|
||||
if (pfc->info->bias_regs[i].puen)
|
||||
do_reg(pfc, pfc->info->bias_regs[i].puen, n++);
|
||||
if (pfc->info->bias_regs[i].pud)
|
||||
do_reg(pfc, pfc->info->bias_regs[i].pud, n++);
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user