arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook

Enable hdmi display output on Cool Pi GenBook.

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20241028123503.384866-4-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Andy Yan 2024-10-28 20:34:58 +08:00 committed by Heiko Stuebner
parent 8d6cb84235
commit 3fb369c1b4

View File

@ -7,6 +7,7 @@
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3588-coolpi-cm5.dtsi"
/ {
@ -35,6 +36,17 @@ charger: dc-charger {
gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi0_out_con>;
};
};
};
leds: leds {
compatible = "gpio-leds";
@ -136,6 +148,28 @@ vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
};
};
/* HDMI CEC is not used */
&hdmi0 {
pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>;
status = "okay";
};
&hdmi0_in {
hdmi0_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi0>;
};
};
&hdmi0_out {
hdmi0_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdptxphy_hdmi0 {
status = "okay";
};
&i2c4 {
status = "okay";
pinctrl-names = "default";
@ -347,3 +381,18 @@ &usb_host1_xhci {
dr_mode = "host";
status = "okay";
};
&vop {
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi0_in_vp0>;
};
};