From 81d874e7c84e16427cbe9f2bb03e0dc2684e44cf Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 18 Jan 2023 11:01:35 +0100 Subject: [PATCH 1/6] net: mdio: Move mdiobus_scan() within file No functional change, just place it earlier in preparation for some refactoring. While at it, correct the comment format and one typo. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Jesse Brandeburg Signed-off-by: Paolo Abeni --- drivers/net/phy/mdio_bus.c | 101 ++++++++++++++++++------------------- 1 file changed, 50 insertions(+), 51 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 902e1c88ef58..61c33c6098a1 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -506,6 +506,56 @@ static int mdiobus_create_device(struct mii_bus *bus, return ret; } +/** + * mdiobus_scan - scan a bus for MDIO devices. + * @bus: mii_bus to scan + * @addr: address on bus to scan + * + * This function scans the MDIO bus, looking for devices which can be + * identified using a vendor/product ID in registers 2 and 3. Not all + * MDIO devices have such registers, but PHY devices typically + * do. Hence this function assumes anything found is a PHY, or can be + * treated as a PHY. Other MDIO devices, such as switches, will + * probably not be found during the scan. + */ +struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) +{ + struct phy_device *phydev = ERR_PTR(-ENODEV); + int err; + + switch (bus->probe_capabilities) { + case MDIOBUS_NO_CAP: + case MDIOBUS_C22: + phydev = get_phy_device(bus, addr, false); + break; + case MDIOBUS_C45: + phydev = get_phy_device(bus, addr, true); + break; + case MDIOBUS_C22_C45: + phydev = get_phy_device(bus, addr, false); + if (IS_ERR(phydev)) + phydev = get_phy_device(bus, addr, true); + break; + } + + if (IS_ERR(phydev)) + return phydev; + + /* For DT, see if the auto-probed phy has a corresponding child + * in the bus node, and set the of_node pointer in this case. + */ + of_mdiobus_link_mdiodev(bus, &phydev->mdio); + + err = phy_device_register(phydev); + if (err) { + phy_device_free(phydev); + return ERR_PTR(-ENODEV); + } + + return phydev; +} +EXPORT_SYMBOL(mdiobus_scan); + /** * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus * @bus: target mii_bus @@ -679,57 +729,6 @@ void mdiobus_free(struct mii_bus *bus) } EXPORT_SYMBOL(mdiobus_free); -/** - * mdiobus_scan - scan a bus for MDIO devices. - * @bus: mii_bus to scan - * @addr: address on bus to scan - * - * This function scans the MDIO bus, looking for devices which can be - * identified using a vendor/product ID in registers 2 and 3. Not all - * MDIO devices have such registers, but PHY devices typically - * do. Hence this function assumes anything found is a PHY, or can be - * treated as a PHY. Other MDIO devices, such as switches, will - * probably not be found during the scan. - */ -struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) -{ - struct phy_device *phydev = ERR_PTR(-ENODEV); - int err; - - switch (bus->probe_capabilities) { - case MDIOBUS_NO_CAP: - case MDIOBUS_C22: - phydev = get_phy_device(bus, addr, false); - break; - case MDIOBUS_C45: - phydev = get_phy_device(bus, addr, true); - break; - case MDIOBUS_C22_C45: - phydev = get_phy_device(bus, addr, false); - if (IS_ERR(phydev)) - phydev = get_phy_device(bus, addr, true); - break; - } - - if (IS_ERR(phydev)) - return phydev; - - /* - * For DT, see if the auto-probed phy has a correspoding child - * in the bus node, and set the of_node pointer in this case. - */ - of_mdiobus_link_mdiodev(bus, &phydev->mdio); - - err = phy_device_register(phydev); - if (err) { - phy_device_free(phydev); - return ERR_PTR(-ENODEV); - } - - return phydev; -} -EXPORT_SYMBOL(mdiobus_scan); - static void mdiobus_stats_acct(struct mdio_bus_stats *stats, bool op, int ret) { preempt_disable(); From d41e127757f37d0d47ccda4af2fe74c32533f798 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 18 Jan 2023 11:01:36 +0100 Subject: [PATCH 2/6] net: mdio: Rework scanning of bus ready for quirks Some C22 PHYs do bad things when there are C45 transactions on the bus. In order to handle this, the bus needs to be scanned first for C22 at all addresses, and then C45 scanned for all addresses. The Marvell pxa168 driver scans a specific address on the bus to find its PHY. This is a C22 only device, so update it to use the c22 helper. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Jesse Brandeburg Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/pxa168_eth.c | 2 +- drivers/net/phy/mdio_bus.c | 125 +++++++++++++++------- include/linux/phy.h | 2 +- 3 files changed, 88 insertions(+), 41 deletions(-) diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index cf456d62677f..87fff539d39d 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -965,7 +965,7 @@ static int pxa168_init_phy(struct net_device *dev) if (dev->phydev) return 0; - phy = mdiobus_scan(pep->smi_bus, pep->phy_addr); + phy = mdiobus_scan_c22(pep->smi_bus, pep->phy_addr); if (IS_ERR(phy)) return PTR_ERR(phy); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 61c33c6098a1..667247f661c5 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -506,38 +506,12 @@ static int mdiobus_create_device(struct mii_bus *bus, return ret; } -/** - * mdiobus_scan - scan a bus for MDIO devices. - * @bus: mii_bus to scan - * @addr: address on bus to scan - * - * This function scans the MDIO bus, looking for devices which can be - * identified using a vendor/product ID in registers 2 and 3. Not all - * MDIO devices have such registers, but PHY devices typically - * do. Hence this function assumes anything found is a PHY, or can be - * treated as a PHY. Other MDIO devices, such as switches, will - * probably not be found during the scan. - */ -struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) +static struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr, bool c45) { struct phy_device *phydev = ERR_PTR(-ENODEV); int err; - switch (bus->probe_capabilities) { - case MDIOBUS_NO_CAP: - case MDIOBUS_C22: - phydev = get_phy_device(bus, addr, false); - break; - case MDIOBUS_C45: - phydev = get_phy_device(bus, addr, true); - break; - case MDIOBUS_C22_C45: - phydev = get_phy_device(bus, addr, false); - if (IS_ERR(phydev)) - phydev = get_phy_device(bus, addr, true); - break; - } - + phydev = get_phy_device(bus, addr, c45); if (IS_ERR(phydev)) return phydev; @@ -554,7 +528,77 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr) return phydev; } -EXPORT_SYMBOL(mdiobus_scan); + +/** + * mdiobus_scan_c22 - scan one address on a bus for C22 MDIO devices. + * @bus: mii_bus to scan + * @addr: address on bus to scan + * + * This function scans one address on the MDIO bus, looking for + * devices which can be identified using a vendor/product ID in + * registers 2 and 3. Not all MDIO devices have such registers, but + * PHY devices typically do. Hence this function assumes anything + * found is a PHY, or can be treated as a PHY. Other MDIO devices, + * such as switches, will probably not be found during the scan. + */ +struct phy_device *mdiobus_scan_c22(struct mii_bus *bus, int addr) +{ + return mdiobus_scan(bus, addr, false); +} +EXPORT_SYMBOL(mdiobus_scan_c22); + +/** + * mdiobus_scan_c45 - scan one address on a bus for C45 MDIO devices. + * @bus: mii_bus to scan + * @addr: address on bus to scan + * + * This function scans one address on the MDIO bus, looking for + * devices which can be identified using a vendor/product ID in + * registers 2 and 3. Not all MDIO devices have such registers, but + * PHY devices typically do. Hence this function assumes anything + * found is a PHY, or can be treated as a PHY. Other MDIO devices, + * such as switches, will probably not be found during the scan. + */ +static struct phy_device *mdiobus_scan_c45(struct mii_bus *bus, int addr) +{ + return mdiobus_scan(bus, addr, true); +} + +static int mdiobus_scan_bus_c22(struct mii_bus *bus) +{ + int i; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if ((bus->phy_mask & BIT(i)) == 0) { + struct phy_device *phydev; + + phydev = mdiobus_scan_c22(bus, i); + if (IS_ERR(phydev) && (PTR_ERR(phydev) != -ENODEV)) + return PTR_ERR(phydev); + } + } + return 0; +} + +static int mdiobus_scan_bus_c45(struct mii_bus *bus) +{ + int i; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if ((bus->phy_mask & BIT(i)) == 0) { + struct phy_device *phydev; + + /* Don't scan C45 if we already have a C22 device */ + if (bus->mdio_map[i]) + continue; + + phydev = mdiobus_scan_c45(bus, i); + if (IS_ERR(phydev) && (PTR_ERR(phydev) != -ENODEV)) + return PTR_ERR(phydev); + } + } + return 0; +} /** * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus @@ -639,16 +683,19 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) goto error_reset_gpiod; } - for (i = 0; i < PHY_MAX_ADDR; i++) { - if ((bus->phy_mask & BIT(i)) == 0) { - struct phy_device *phydev; + if (bus->probe_capabilities == MDIOBUS_NO_CAP || + bus->probe_capabilities == MDIOBUS_C22 || + bus->probe_capabilities == MDIOBUS_C22_C45) { + err = mdiobus_scan_bus_c22(bus); + if (err) + goto error; + } - phydev = mdiobus_scan(bus, i); - if (IS_ERR(phydev) && (PTR_ERR(phydev) != -ENODEV)) { - err = PTR_ERR(phydev); - goto error; - } - } + if (bus->probe_capabilities == MDIOBUS_C45 || + bus->probe_capabilities == MDIOBUS_C22_C45) { + err = mdiobus_scan_bus_c45(bus); + if (err) + goto error; } mdiobus_setup_mdiodev_from_board_info(bus, mdiobus_create_device); @@ -658,7 +705,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) return 0; error: - while (--i >= 0) { + for (i = 0; i < PHY_MAX_ADDR; i++) { mdiodev = bus->mdio_map[i]; if (!mdiodev) continue; diff --git a/include/linux/phy.h b/include/linux/phy.h index b3cf1e08e880..fceaac0fb319 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -464,7 +464,7 @@ static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) } struct mii_bus *mdio_find_bus(const char *mdio_name); -struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); +struct phy_device *mdiobus_scan_c22(struct mii_bus *bus, int addr); #define PHY_INTERRUPT_DISABLED false #define PHY_INTERRUPT_ENABLED true From 3486593374858b41ae6ef7720cb28ff39ad822f3 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 18 Jan 2023 11:01:37 +0100 Subject: [PATCH 3/6] net: mdio: Add workaround for Micrel PHYs which are not C45 compatible After scanning the bus for C22 devices, check if any Micrel PHYs have been found. They are known to do bad things if there are C45 transactions on the bus. Prevent the scanning of the bus using C45 if such a PHY has been detected. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Signed-off-by: Paolo Abeni --- drivers/net/phy/mdio_bus.c | 37 ++++++++++++++++++++++++++++++++++--- include/linux/micrel_phy.h | 2 ++ 2 files changed, 36 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 667247f661c5..a664eeb1868d 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -600,6 +601,32 @@ static int mdiobus_scan_bus_c45(struct mii_bus *bus) return 0; } +/* There are some C22 PHYs which do bad things when where is a C45 + * transaction on the bus, like accepting a read themselves, and + * stomping over the true devices reply, to performing a write to + * themselves which was intended for another device. Now that C22 + * devices have been found, see if any of them are bad for C45, and if we + * should skip the C45 scan. + */ +static bool mdiobus_prevent_c45_scan(struct mii_bus *bus) +{ + int i; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + struct phy_device *phydev; + u32 oui; + + phydev = mdiobus_get_phy(bus, i); + if (!phydev) + continue; + oui = phydev->phy_id >> 10; + + if (oui == MICREL_OUI) + return true; + } + return false; +} + /** * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus * @bus: target mii_bus @@ -617,8 +644,9 @@ static int mdiobus_scan_bus_c45(struct mii_bus *bus) int __mdiobus_register(struct mii_bus *bus, struct module *owner) { struct mdio_device *mdiodev; - int i, err; struct gpio_desc *gpiod; + bool prevent_c45_scan; + int i, err; if (!bus || !bus->name) return -EINVAL; @@ -691,8 +719,11 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) goto error; } - if (bus->probe_capabilities == MDIOBUS_C45 || - bus->probe_capabilities == MDIOBUS_C22_C45) { + prevent_c45_scan = mdiobus_prevent_c45_scan(bus); + + if (!prevent_c45_scan && + (bus->probe_capabilities == MDIOBUS_C45 || + bus->probe_capabilities == MDIOBUS_C22_C45)) { err = mdiobus_scan_bus_c45(bus); if (err) goto error; diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 1f7c33b2f5a3..771e050883db 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -8,6 +8,8 @@ #ifndef _MICREL_PHY_H #define _MICREL_PHY_H +#define MICREL_OUI 0x0885 + #define MICREL_PHY_ID_MASK 0x00fffff0 #define PHY_ID_KSZ8873MLL 0x000e7237 From 1a136ca2e089d91df8eec0a796a324171373ffd8 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 18 Jan 2023 11:01:38 +0100 Subject: [PATCH 4/6] net: mdio: scan bus based on bus capabilities for C22 and C45 Now that all MDIO bus drivers which set probe_capabilities to MDIOBUS_C22_C45 have been converted to use the name API for C45 transactions, perform the scanning of the bus based on which methods the bus provides. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Jesse Brandeburg Signed-off-by: Paolo Abeni --- drivers/net/phy/mdio_bus.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index a664eeb1868d..5b2f48c09a6a 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -711,9 +711,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) goto error_reset_gpiod; } - if (bus->probe_capabilities == MDIOBUS_NO_CAP || - bus->probe_capabilities == MDIOBUS_C22 || - bus->probe_capabilities == MDIOBUS_C22_C45) { + if (bus->read) { err = mdiobus_scan_bus_c22(bus); if (err) goto error; @@ -721,9 +719,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) prevent_c45_scan = mdiobus_prevent_c45_scan(bus); - if (!prevent_c45_scan && - (bus->probe_capabilities == MDIOBUS_C45 || - bus->probe_capabilities == MDIOBUS_C22_C45)) { + if (!prevent_c45_scan && bus->read_c45) { err = mdiobus_scan_bus_c45(bus); if (err) goto error; From fbfe97597c777cca6a91804f3f6ce046acb98860 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 18 Jan 2023 11:01:39 +0100 Subject: [PATCH 5/6] net: phy: Decide on C45 capabilities based on presence of method Some PHYs provide invalid IDs in C22 space. If C45 is supported on the bus an attempt can be made to get the IDs from the C45 space. Decide on this based on the presence of the C45 read method in the bus structure. This will allow the unreliable probe_capabilities to be removed. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Jesse Brandeburg Signed-off-by: Paolo Abeni --- drivers/net/phy/phy_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 0d371a0a49f2..9ba8f973f26f 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -946,7 +946,7 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) * probe with C45 to see if we're able to get a valid PHY ID in the C45 * space, if successful, create the C45 PHY device. */ - if (!is_c45 && phy_id == 0 && bus->probe_capabilities >= MDIOBUS_C45) { + if (!is_c45 && phy_id == 0 && bus->read_c45) { r = get_phy_c45_ids(bus, addr, &c45_ids); if (!r) return phy_device_create(bus, addr, phy_id, From da099a7fb13db67678ecfa03f8ac5df8134c991b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 18 Jan 2023 11:01:40 +0100 Subject: [PATCH 6/6] net: phy: Remove probe_capabilities Deciding if to probe of PHYs using C45 is now determine by if the bus provides the C45 read method. This makes probe_capabilities redundant so remove it. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Reviewed-by: Jesse Brandeburg Acked-by: Andrew Jeffery Signed-off-by: Paolo Abeni --- drivers/net/ethernet/adi/adin1110.c | 1 - drivers/net/ethernet/freescale/xgmac_mdio.c | 1 - drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 - drivers/net/ethernet/microchip/lan743x_main.c | 2 -- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 3 --- drivers/net/mdio/mdio-aspeed.c | 1 - include/linux/phy.h | 8 -------- 7 files changed, 17 deletions(-) diff --git a/drivers/net/ethernet/adi/adin1110.c b/drivers/net/ethernet/adi/adin1110.c index 0805f249fff2..25f55756681d 100644 --- a/drivers/net/ethernet/adi/adin1110.c +++ b/drivers/net/ethernet/adi/adin1110.c @@ -523,7 +523,6 @@ static int adin1110_register_mdiobus(struct adin1110_priv *priv, mii_bus->priv = priv; mii_bus->parent = dev; mii_bus->phy_mask = ~((u32)GENMASK(2, 0)); - mii_bus->probe_capabilities = MDIOBUS_C22; snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); ret = devm_mdiobus_register(dev, mii_bus); diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c index 8b5a4cd8ff08..a13b4ba4d6e1 100644 --- a/drivers/net/ethernet/freescale/xgmac_mdio.c +++ b/drivers/net/ethernet/freescale/xgmac_mdio.c @@ -397,7 +397,6 @@ static int xgmac_mdio_probe(struct platform_device *pdev) bus->read_c45 = xgmac_mdio_read_c45; bus->write_c45 = xgmac_mdio_write_c45; bus->parent = &pdev->dev; - bus->probe_capabilities = MDIOBUS_C22_C45; snprintf(bus->id, MII_BUS_ID_SIZE, "%pa", &res->start); priv = bus->priv; diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 75bbb1e7766c..801deac58bf7 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -814,7 +814,6 @@ static int mtk_mdio_init(struct mtk_eth *eth) eth->mii_bus->write = mtk_mdio_write_c22; eth->mii_bus->read_c45 = mtk_mdio_read_c45; eth->mii_bus->write_c45 = mtk_mdio_write_c45; - eth->mii_bus->probe_capabilities = MDIOBUS_C22_C45; eth->mii_bus->priv = eth; eth->mii_bus->parent = eth->dev; diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index b5add1c5fa06..7e0871b631e4 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -3302,7 +3302,6 @@ static int lan743x_mdiobus_init(struct lan743x_adapter *adapter) lan743x_csr_write(adapter, SGMII_CTL, sgmii_ctl); netif_dbg(adapter, drv, adapter->netdev, "SGMII operation\n"); - adapter->mdiobus->probe_capabilities = MDIOBUS_C22_C45; adapter->mdiobus->read = lan743x_mdiobus_read_c22; adapter->mdiobus->write = lan743x_mdiobus_write_c22; adapter->mdiobus->read_c45 = lan743x_mdiobus_read_c45; @@ -3318,7 +3317,6 @@ static int lan743x_mdiobus_init(struct lan743x_adapter *adapter) netif_dbg(adapter, drv, adapter->netdev, "RGMII operation\n"); // Only C22 support when RGMII I/F - adapter->mdiobus->probe_capabilities = MDIOBUS_C22; adapter->mdiobus->read = lan743x_mdiobus_read_c22; adapter->mdiobus->write = lan743x_mdiobus_write_c22; adapter->mdiobus->name = "lan743x-mdiobus"; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index d2cb22f49ce5..21aaa2730ac8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -553,9 +553,6 @@ int stmmac_mdio_register(struct net_device *ndev) new_bus->name = "stmmac"; - if (priv->plat->has_gmac4) - new_bus->probe_capabilities = MDIOBUS_C22_C45; - if (priv->plat->has_xgmac) { new_bus->read = &stmmac_xgmac2_mdio_read_c22; new_bus->write = &stmmac_xgmac2_mdio_write_c22; diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-aspeed.c index 2f4bbda5e56c..c727103c8b05 100644 --- a/drivers/net/mdio/mdio-aspeed.c +++ b/drivers/net/mdio/mdio-aspeed.c @@ -164,7 +164,6 @@ static int aspeed_mdio_probe(struct platform_device *pdev) bus->write = aspeed_mdio_write_c22; bus->read_c45 = aspeed_mdio_read_c45; bus->write_c45 = aspeed_mdio_write_c45; - bus->probe_capabilities = MDIOBUS_C22_C45; rc = of_mdiobus_register(bus, pdev->dev.of_node); if (rc) { diff --git a/include/linux/phy.h b/include/linux/phy.h index fceaac0fb319..fbeba4fee8d4 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -419,14 +419,6 @@ struct mii_bus { /** @reset_gpiod: Reset GPIO descriptor pointer */ struct gpio_desc *reset_gpiod; - /** @probe_capabilities: bus capabilities, used for probing */ - enum { - MDIOBUS_NO_CAP = 0, - MDIOBUS_C22, - MDIOBUS_C45, - MDIOBUS_C22_C45, - } probe_capabilities; - /** @shared_lock: protect access to the shared element */ struct mutex shared_lock;