github-mirror/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2026-11-07 06:17:02 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity Graph

net: phy: broadcom: enable jumbo frames on BCM54xx

Browse Source 
Jumbo packets need two bits that default to off, extended packet length in
the auxiliary control register and PCS transmit FIFO elasticity in the
extended control register. The latter raises the transmit limit from 4.5
KB to 9 KB at the cost of 16 ns of 1000BASE-T transmit latency, and the
two together take copper mode to 10 KB.

Without them such frames are lost on a 100M link while the same frames
pass at 1G. On a Raspberry Pi CM5, which uses a BCM54210PE, 9142 byte
frames at 100M are lost 20 out of 20 with the MAC counting every one
as transmitted. The same frames over the same path at 1G arrive intact.

Set both, which bcm_phy_enable_jumbo() already does for bcm7xxx. The
frames then arrive and the payloads check out byte for byte.

Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260914094703.1093504-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Nicolai Buchwitz 2026-09-14 11:47:02 +02:00 committed by Jakub Kicinski
parent 87b80c2f6b
commit 3c8abdbe34
1 changed files with 7 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/net/phy/broadcom.c
View File

@ -537,6 +537,13 @@ static int bcm54xx_config_init(struct phy_device *phydev)
bcm54xx_ptp_config_init(phydev);
/* Transmit is limited to 4.5 KB without it, see the BCM54210PE
* datasheet section 5.4.12.14.
*/
err = bcm_phy_enable_jumbo(phydev);
if (err < 0)
return err;
/* Acknowledge any left over interrupt and charge the device for
* wake-up.
*/