diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index dd9cf518bfed..50a54abc7618 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -182,6 +182,14 @@ r9a07g044c2-hummingboard-iiot-rs485-a-dtbs := r9a07g044c2-hummingboard-iiot.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-rs485-a.dtb
 r9a07g044c2-hummingboard-iiot-rs485-b-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-b.dtbo
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-rs485-b.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-ripple.dtb
+r9a07g044c2-hummingboard-ripple-emmc-dtbs := r9a07g044c2-hummingboard-ripple.dtb rzg2l-sr-som-emmc.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-ripple-emmc.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += rzg2lc-hummingboard-pulse-leds.dtbo
+r9a07g044c2-hummingboard-ripple-leds-dtbs := r9a07g044c2-hummingboard-ripple.dtb rzg2lc-hummingboard-pulse-leds.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-ripple-leds.dtb
+r9a07g044c2-hummingboard-ripple-microsd-dtbs := r9a07g044c2-hummingboard-ripple.dtb rzg2l-hummingboard-iiot-microsd.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-ripple-microsd.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo
 r9a07g044c2-smarc-cru-csi-ov5645-dtbs := r9a07g044c2-smarc.dtb r9a07g044c2-smarc-cru-csi-ov5645.dtbo
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-hummingboard-ripple.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-hummingboard-ripple.dts
new file mode 100644
index 000000000000..ef8e2f62b682
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-hummingboard-ripple.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "r9a07g044c2.dtsi"
+#include "rzg2lc-sr-som.dtsi"
+#include "rzg2l-hummingboard-pulse-common.dtsi"
+#include "rzg2l-hummingboard-pulse-micro-hdmi.dtsi"
+
+/ {
+	compatible = "solidrun,rzg2lc-hummingboard-ripple", "solidrun,rzg2lc-sr-som",
+		     "renesas,r9a07g044c2", "renesas,r9a07g044";
+	model = "SolidRun RZ/G2LC HummingBoard Ripple";
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_LOW>;
+			label = "D30";
+		};
+	};
+
+	vbus1: regulator-vbus-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus1";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		gpios = <&pinctrl RZG2L_GPIO(5, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpt {
+	/* mikrobus header pwm pin is pwm channel 6 */
+	pinctrl-0 = <&mikro_pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi {
+	interrupts-extended = <&pinctrl RZG2L_GPIO(42, 2) IRQ_TYPE_EDGE_FALLING>;
+	pd-gpios = <&pinctrl RZG2L_GPIO(40, 2) GPIO_ACTIVE_LOW>;
+};
+
+&hub_2_0 {
+	reset-gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl {
+	mpcie_rst_hog: mpcie-reset-hog {
+		gpios = <RZG2L_GPIO(19, 1) GPIO_ACTIVE_LOW>;
+		gpio-hog;
+		line-name = "mpcie-reset";
+		output-low;
+	};
+
+	mikro_pwm_pins: pinctrl-mikro-pwm-grp {
+		pinmux = <RZG2L_PORT_PINMUX(41, 0, 4)>; /* GTIOC3A */
+	};
+
+	mikro_uart_pins: pinctrl-mikro-uart-grp {
+		pinmux = <RZG2L_PORT_PINMUX(40, 1, 1)>, /* SCIF1_RXD */
+			 <RZG2L_PORT_PINMUX(40, 0, 1)>; /* SCIF1_TXD */
+	};
+
+	usb0_vbus_pins: usb0-vbus {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>; /* USB0_VBUSEN */
+	};
+};
+
+&usb2_phy1 {
+	vbus-supply = <&vbus1>;
+};
+
+&vmmc {
+	gpios = <&pinctrl RZG2L_GPIO(18, 1) GPIO_ACTIVE_LOW>;
+};
+
+&vmpcie {
+	/*
+	 * G2LC SoM v1.2 moved this IO from J7-28 (CON4-12)
+	 * to J7-18 (this regulator).
+	 * There are no known users of CON4-12 and thus no need
+	 * to differentiate here between SoM v1.1 and v1.2.
+	 */
+	gpios = <&pinctrl RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-hummingboard-pulse-leds.dtso b/arch/arm64/boot/dts/renesas/rzg2lc-hummingboard-pulse-leds.dtso
new file mode 100644
index 000000000000..a2572718fa87
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-hummingboard-pulse-leds.dtso
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Overlay for SolidRun RZ/G2LC HummingBoard Pulse
+ * enabling LEDs D31-34 in exchange for on-SoM Bluetooth.
+ *
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&leds {
+	led-1 {
+		label = "D31";
+		color = <LED_COLOR_ID_GREEN>;
+		gpios = <&pinctrl RZG2L_GPIO(5, 2) GPIO_ACTIVE_LOW>;
+		default-state = "on";
+	};
+
+	led-2 {
+		label = "D32";
+		color = <LED_COLOR_ID_GREEN>;
+		gpios = <&pinctrl RZG2L_GPIO(5, 1) GPIO_ACTIVE_LOW>;
+		default-state = "on";
+	};
+
+	led-3 {
+		label = "D33";
+		color = <LED_COLOR_ID_GREEN>;
+		gpios = <&pinctrl RZG2L_GPIO(42, 0) GPIO_ACTIVE_LOW>;
+		default-state = "on";
+	};
+
+	led-4 {
+		label = "D34";
+		color = <LED_COLOR_ID_GREEN>;
+		gpios = <&pinctrl RZG2L_GPIO(42, 1) GPIO_ACTIVE_LOW>;
+		default-state = "on";
+	};
+};
+
+&scif2 {
+	status = "disabled";
+};