Merge branch 'clockevents/4.4' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core

clockevent updates from Daniel Lezcano:

 - Remove unneeded memset in em_sti, sh_cmt and h8300 because there are already
   zeroed by a kzalloc (Alexey Klimov)

 - Optimize code by replacing this_cpu_ptr by container_of on the exynos_mct (Alexey
   Klimov)

 - Get immune from a spurious interrupt when enabling the mtk_timer (Daniel Lezcano)

 - Use the dynamic irq affinity to optimize wakeup and useless IPI timer on the imx
   timer (Lucas Stach)

 - Add new timer for Tango SoCs (Marc Gonzalez)

 - Implement the timer delay for armada-370-xp (Russell King)

 - Use GPT as clock source (Yingjoe Chen)

drivers/clocksource/Kconfig

@@ -279,6 +279,10 @@ config CLKSRC_MIPS_GIC
 	depends on MIPS_GIC
 	select CLKSRC_OF
 
+config CLKSRC_TANGO_XTAL
+	bool
+	select CLKSRC_OF
+
 config CLKSRC_PXA
 	def_bool y if ARCH_PXA || ARCH_SA1100
 	select CLKSRC_OF if OF

drivers/clocksource/Makefile

@@ -56,6 +56,7 @@ obj-$(CONFIG_ARCH_KEYSTONE)		+= timer-keystone.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= timer-integrator-ap.o
 obj-$(CONFIG_CLKSRC_VERSATILE)		+= versatile.o
 obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
+obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= tango_xtal.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
 obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300)			+= h8300_timer8.o

drivers/clocksource/em_sti.c

@@ -228,7 +228,6 @@ static int em_sti_register_clocksource(struct em_sti_priv *p)
 {
 	struct clocksource *cs = &p->cs;
 
-	memset(cs, 0, sizeof(*cs));
 	cs->name = dev_name(&p->pdev->dev);
 	cs->rating = 200;
 	cs->read = em_sti_clocksource_read;
@@ -285,7 +284,6 @@ static void em_sti_register_clockevent(struct em_sti_priv *p)
 {
 	struct clock_event_device *ced = &p->ced;
 
-	memset(ced, 0, sizeof(*ced));
 	ced->name = dev_name(&p->pdev->dev);
 	ced->features = CLOCK_EVT_FEAT_ONESHOT;
 	ced->rating = 200;

drivers/clocksource/exynos_mct.c

@@ -382,24 +382,28 @@ static void exynos4_mct_tick_start(unsigned long cycles,
 static int exynos4_tick_set_next_event(unsigned long cycles,
 				       struct clock_event_device *evt)
 {
-	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+	struct mct_clock_event_device *mevt;
 
+	mevt = container_of(evt, struct mct_clock_event_device, evt);
 	exynos4_mct_tick_start(cycles, mevt);
-
 	return 0;
 }
 
 static int set_state_shutdown(struct clock_event_device *evt)
 {
-	exynos4_mct_tick_stop(this_cpu_ptr(&percpu_mct_tick));
+	struct mct_clock_event_device *mevt;
+
+	mevt = container_of(evt, struct mct_clock_event_device, evt);
+	exynos4_mct_tick_stop(mevt);
 	return 0;
 }
 
 static int set_state_periodic(struct clock_event_device *evt)
 {
-	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+	struct mct_clock_event_device *mevt;
 	unsigned long cycles_per_jiffy;
 
+	mevt = container_of(evt, struct mct_clock_event_device, evt);
 	cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
 			    >> evt->shift);
 	exynos4_mct_tick_stop(mevt);

drivers/clocksource/h8300_timer16.c

@@ -153,7 +153,6 @@ static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
 	int ret, irq;
 	unsigned int ch;
 
-	memset(p, 0, sizeof(*p));
 	p->pdev = pdev;
 
 	res[REG_CH] = platform_get_resource(p->pdev,

drivers/clocksource/h8300_timer8.c

@@ -215,7 +215,6 @@ static int timer8_setup(struct timer8_priv *p,
 	int irq;
 	int ret;
 
-	memset(p, 0, sizeof(*p));
 	p->pdev = pdev;
 
 	res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);

drivers/clocksource/h8300_tpu.c

@@ -123,7 +123,6 @@ static int __init tpu_setup(struct tpu_priv *p, struct platform_device *pdev)
 {
 	struct resource *res[2];
 
-	memset(p, 0, sizeof(*p));
 	p->pdev = pdev;
 
 	res[CH_L] = platform_get_resource(p->pdev, IORESOURCE_MEM, CH_L);

drivers/clocksource/mtk_timer.c

@@ -24,6 +24,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/sched_clock.h>
 #include <linux/slab.h>
 
 #define GPT_IRQ_EN_REG		0x00
@@ -59,6 +60,13 @@ struct mtk_clock_event_device {
 	struct clock_event_device dev;
 };
 
+static void __iomem *gpt_sched_reg __read_mostly;
+
+static u64 notrace mtk_read_sched_clock(void)
+{
+	return readl_relaxed(gpt_sched_reg);
+}
+
 static inline struct mtk_clock_event_device *to_mtk_clk(
 				struct clock_event_device *c)
 {
@@ -141,14 +149,6 @@ static irqreturn_t mtk_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void mtk_timer_global_reset(struct mtk_clock_event_device *evt)
-{
-	/* Disable all interrupts */
-	writel(0x0, evt->gpt_base + GPT_IRQ_EN_REG);
-	/* Acknowledge all interrupts */
-	writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
-}
-
 static void
 mtk_timer_setup(struct mtk_clock_event_device *evt, u8 timer, u8 option)
 {
@@ -168,6 +168,12 @@ static void mtk_timer_enable_irq(struct mtk_clock_event_device *evt, u8 timer)
 {
 	u32 val;
 
+	/* Disable all interrupts */
+	writel(0x0, evt->gpt_base + GPT_IRQ_EN_REG);
+
+	/* Acknowledge all spurious pending interrupts */
+	writel(0x3f, evt->gpt_base + GPT_IRQ_ACK_REG);
+
 	val = readl(evt->gpt_base + GPT_IRQ_EN_REG);
 	writel(val | GPT_IRQ_ENABLE(timer),
 			evt->gpt_base + GPT_IRQ_EN_REG);
@@ -220,8 +226,6 @@ static void __init mtk_timer_init(struct device_node *node)
 	}
 	rate = clk_get_rate(clk);
 
-	mtk_timer_global_reset(evt);
-
 	if (request_irq(evt->dev.irq, mtk_timer_interrupt,
 			IRQF_TIMER | IRQF_IRQPOLL, "mtk_timer", evt)) {
 		pr_warn("failed to setup irq %d\n", evt->dev.irq);
@@ -234,6 +238,8 @@ static void __init mtk_timer_init(struct device_node *node)
 	mtk_timer_setup(evt, GPT_CLK_SRC, TIMER_CTRL_OP_FREERUN);
 	clocksource_mmio_init(evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC),
 			node->name, rate, 300, 32, clocksource_mmio_readl_up);
+	gpt_sched_reg = evt->gpt_base + TIMER_CNT_REG(GPT_CLK_SRC);
+	sched_clock_register(mtk_read_sched_clock, 32, rate);
 
 	/* Configure clock event */
 	mtk_timer_setup(evt, GPT_CLK_EVT, TIMER_CTRL_OP_REPEAT);

drivers/clocksource/sh_cmt.c

@@ -962,7 +962,6 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
 	unsigned int i;
 	int ret;
 
-	memset(cmt, 0, sizeof(*cmt));
 	cmt->pdev = pdev;
 	raw_spin_lock_init(&cmt->lock);
 

drivers/clocksource/tango_xtal.c

@@ -0,0 +1,66 @@
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+#include <linux/of_address.h>
+#include <linux/printk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+static void __iomem *xtal_in_cnt;
+static struct delay_timer delay_timer;
+
+static unsigned long notrace read_xtal_counter(void)
+{
+	return readl_relaxed(xtal_in_cnt);
+}
+
+static u64 notrace read_sched_clock(void)
+{
+	return read_xtal_counter();
+}
+
+static cycle_t read_clocksource(struct clocksource *cs)
+{
+	return read_xtal_counter();
+}
+
+static struct clocksource tango_xtal = {
+	.name	= "tango-xtal",
+	.rating	= 350,
+	.read	= read_clocksource,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init tango_clocksource_init(struct device_node *np)
+{
+	struct clk *clk;
+	int xtal_freq, ret;
+
+	xtal_in_cnt = of_iomap(np, 0);
+	if (xtal_in_cnt == NULL) {
+		pr_err("%s: invalid address\n", np->full_name);
+		return;
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("%s: invalid clock\n", np->full_name);
+		return;
+	}
+
+	xtal_freq = clk_get_rate(clk);
+	delay_timer.freq = xtal_freq;
+	delay_timer.read_current_timer = read_xtal_counter;
+
+	ret = clocksource_register_hz(&tango_xtal, xtal_freq);
+	if (ret != 0) {
+		pr_err("%s: registration failed\n", np->full_name);
+		return;
+	}
+
+	sched_clock_register(read_sched_clock, 32, xtal_freq);
+	register_current_timer_delay(&delay_timer);
+}
+
+CLOCKSOURCE_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);

drivers/clocksource/time-armada-370-xp.c

@@ -45,6 +45,8 @@
 #include <linux/percpu.h>
 #include <linux/syscore_ops.h>
 
+#include <asm/delay.h>
+
 /*
  * Timer block registers.
  */
@@ -249,6 +251,15 @@ struct syscore_ops armada_370_xp_timer_syscore_ops = {
 	.resume		= armada_370_xp_timer_resume,
 };
 
+static unsigned long armada_370_delay_timer_read(void)
+{
+	return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+static struct delay_timer armada_370_delay_timer = {
+	.read_current_timer = armada_370_delay_timer_read,
+};
+
 static void __init armada_370_xp_timer_common_init(struct device_node *np)
 {
 	u32 clr = 0, set = 0;
@@ -287,6 +298,9 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
 		TIMER0_RELOAD_EN | enable_mask,
 		TIMER0_RELOAD_EN | enable_mask);
 
+	armada_370_delay_timer.freq = timer_clk;
+	register_current_timer_delay(&armada_370_delay_timer);
+
 	/*
 	 * Set scale and timer for sched_clock.
 	 */

drivers/clocksource/timer-imx-gpt.c

@@ -305,13 +305,14 @@ static int __init mxc_clockevent_init(struct imx_timer *imxtm)
 	struct irqaction *act = &imxtm->act;
 
 	ced->name = "mxc_timer1";
-	ced->features = CLOCK_EVT_FEAT_ONESHOT;
+	ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
 	ced->set_state_shutdown = mxc_shutdown;
 	ced->set_state_oneshot = mxc_set_oneshot;
 	ced->tick_resume = mxc_shutdown;
 	ced->set_next_event = imxtm->gpt->set_next_event;
 	ced->rating = 200;
 	ced->cpumask = cpumask_of(0);
+	ced->irq = imxtm->irq;
 	clockevents_config_and_register(ced, clk_get_rate(imxtm->clk_per),
 					0xff, 0xfffffffe);