From 881ea7d3f55bf7b8834c81d86c4dcb3d5f786f15 Mon Sep 17 00:00:00 2001
From: chenhui zhao <chenhui.zhao@freescale.com>
Date: Thu, 23 Jul 2015 11:55:45 +0800
Subject: [PATCH 01/38] powerpc/corenet: use the mixed mode of MPIC when
 enabling CPU hotplug

Core reset may cause issue if using the proxy mode of MPIC.
Use the mixed mode of MPIC if enabling CPU hotplug.

Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/corenet_generic.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index b39557120cbb..99412b32586d 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -214,7 +214,15 @@ define_machine(corenet_generic) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
+/*
+ * Core reset may cause issue if using the proxy mode of MPIC.
+ * So, use the mixed mode of MPIC if enabling CPU hotplug.
+ */
+#ifdef CONFIG_HOTPLUG_CPU
+	.get_irq		= mpic_get_irq,
+#else
 	.get_irq		= mpic_get_coreint_irq,
+#endif
 	.restart		= fsl_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,

From 07e9117e43fc5a25787379be011e36d0980f3135 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@freescale.com>
Date: Wed, 29 Jul 2015 15:12:38 +0800
Subject: [PATCH 02/38] powerpc/dts: Add and fix 1588 timer node for eTSEC

Add 1588 timer node in files:
arch/powerpc/boot/dts/bsc9131rdb.dtsi
arch/powerpc/boot/dts/bsc9132qds.dtsi
arch/powerpc/boot/dts/p1010rdb.dtsi
arch/powerpc/boot/dts/p1020rdb-pd.dts
arch/powerpc/boot/dts/p1021rdb-pc.dtsi
arch/powerpc/boot/dts/p1022ds.dtsi
arch/powerpc/boot/dts/p1025twr.dtsi
For P2020RDB-PC, registers' values should be calculated
based on default 1588 reference clock(300MHz) not 250MHz,
and fix this in file:
arch/powerpc/boot/dts/p2020rdb-pc.dtsi

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/bsc9131rdb.dtsi  | 12 ++++++++++++
 arch/powerpc/boot/dts/bsc9132qds.dtsi  | 12 ++++++++++++
 arch/powerpc/boot/dts/p1010rdb.dtsi    | 12 ++++++++++++
 arch/powerpc/boot/dts/p1020rdb-pd.dts  | 12 ++++++++++++
 arch/powerpc/boot/dts/p1021rdb-pc.dtsi | 12 ++++++++++++
 arch/powerpc/boot/dts/p1022ds.dtsi     | 12 ++++++++++++
 arch/powerpc/boot/dts/p1025twr.dtsi    | 12 ++++++++++++
 arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 12 ++++++------
 8 files changed, 90 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
index 45efcbadb23c..f4d96d277ed5 100644
--- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
+++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
@@ -80,6 +80,18 @@ sdhc@2e000 {
 		status = "disabled";
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xcccccccd>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <249999999>;
+	};
+
 	enet0: ethernet@b0000 {
 		phy-handle = <&phy0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi
index af8e88830221..7a13bf2aa439 100644
--- a/arch/powerpc/boot/dts/bsc9132qds.dtsi
+++ b/arch/powerpc/boot/dts/bsc9132qds.dtsi
@@ -87,6 +87,18 @@ tbi0: tbi-phy@11 {
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xcccccccd>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <249999999>;
+	};
+
 	enet0: ethernet@b0000 {
 		phy-handle = <&phy0>;
 		tbi-handle = <&tbi0>;
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index ea534efa790d..0f0ced69835a 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -186,6 +186,18 @@ tbi1: tbi-phy@11 {
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0x80000016>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <199999999>;
+	};
+
 	enet0: ethernet@b0000 {
 		phy-handle = <&phy0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1020rdb-pd.dts b/arch/powerpc/boot/dts/p1020rdb-pd.dts
index 987017ea36b6..c7c64162a309 100644
--- a/arch/powerpc/boot/dts/p1020rdb-pd.dts
+++ b/arch/powerpc/boot/dts/p1020rdb-pd.dts
@@ -225,6 +225,18 @@ tbi2: tbi-phy@11 {
 			};
 		};
 
+		ptp_clock@b0e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0xb0e00 0xb0>;
+			interrupts = <68 2 0 0 69 2 0 0>;
+			fsl,tclk-period	= <10>;
+			fsl,tmr-prsc	= <2>;
+			fsl,tmr-add	= <0x80000016>;
+			fsl,tmr-fiper1	= <999999990>;
+			fsl,tmr-fiper2	= <99990>;
+			fsl,max-adj	= <199999999>;
+		};
+
 		enet0: ethernet@b0000 {
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
index d6274c58f496..e8a0f95fb24a 100644
--- a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
@@ -224,6 +224,18 @@ tbi2: tbi-phy@11 {
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0x80000016>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <199999999>;
+	};
+
 	enet0: ethernet@b0000 {
 		fixed-link = <1 1 1000 0 0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi
index 957e0dc1dc0f..149da0f123ee 100644
--- a/arch/powerpc/boot/dts/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/p1022ds.dtsi
@@ -215,6 +215,18 @@ tbi-phy@2 {
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xc01ebd3d>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <266499999>;
+	};
+
 	ethernet@b0000 {
 		phy-handle = <&phy0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/p1025twr.dtsi
index 8453501c256e..08816fb474f5 100644
--- a/arch/powerpc/boot/dts/p1025twr.dtsi
+++ b/arch/powerpc/boot/dts/p1025twr.dtsi
@@ -138,6 +138,18 @@ tbi2: tbi-phy@11 {
 		};
 	};
 
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xc0000021>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <133333332>;
+	};
+
 	enet0: ethernet@b0000 {
 		phy-handle = <&phy0>;
 		phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
index c21d1c7d16cd..ad2e242365cc 100644
--- a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
@@ -215,12 +215,12 @@ mdio@26520 {
 	};
 
 	ptp_clock@24e00 {
-		fsl,tclk-period = <5>;
-		fsl,tmr-prsc = <200>;
-		fsl,tmr-add = <0xCCCCCCCD>;
-		fsl,tmr-fiper1 = <0x3B9AC9FB>;
-		fsl,tmr-fiper2 = <0x0001869B>;
-		fsl,max-adj = <249999999>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xaaaaaaab>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <299999999>;
 	};
 
 	enet0: ethernet@24000 {

From 78c102c24cd31ea4f242162e4ca721e75866fcba Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Fri, 31 Jul 2015 11:16:06 +0200
Subject: [PATCH 03/38] powerpc/dts: don't fall back to fsl,pq3-gpio for
 fsl,mpc8572-gpio
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

While the handling of fsl,pq3-gpio and fsl,mpc8572-gpio is done in the
same driver and the two hardly differ, the latter controller needs a
workaround for an erratum in the gpio_get callback. To make this
difference more explicit remove fsl,pq3-gpio from the list of
compatibles for mpc8572 machines.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi | 2 +-
 arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
index c8b2daa40ac8..41935709ebe8 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -172,7 +172,7 @@ spi@7000 {
 
 	/* mark compat w/8572 to get some erratum treatment */
 	gpio-controller@f000 {
-		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+		compatible = "fsl,mpc8572-gpio";
 	};
 
 	sata@18000 {
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
index d44e25a48734..49294cf36b4e 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -162,7 +162,7 @@ memory-controller@6000 {
 /include/ "pq3-dma-1.dtsi"
 /include/ "pq3-gpio-0.dtsi"
 	gpio-controller@f000 {
-		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+		compatible = "fsl,mpc8572-gpio";
 	};
 
 	L2: l2-cache-controller@20000 {

From a109752ea6a55c3682b6ac9114a125c5ce7e5353 Mon Sep 17 00:00:00 2001
From: Zhao Qiang <qiang.zhao@freescale.com>
Date: Fri, 21 Aug 2015 10:48:56 +0800
Subject: [PATCH 04/38] powerpc/t104xd4rdb: add DS26522 nodes to device tree

DS26522 is used for tdm, configured by SPI bus.
Add nodes under spi node to t104xd4rdb.dtsi.

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 .../devicetree/bindings/net/maxim,ds26522.txt       | 13 +++++++++++++
 arch/powerpc/boot/dts/t104xd4rdb.dtsi               | 10 ++++++++++
 2 files changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/maxim,ds26522.txt

diff --git a/Documentation/devicetree/bindings/net/maxim,ds26522.txt b/Documentation/devicetree/bindings/net/maxim,ds26522.txt
new file mode 100644
index 000000000000..ee8bb725f245
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/maxim,ds26522.txt
@@ -0,0 +1,13 @@
+* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver
+
+Required properties:
+- compatible: Should contain "maxim,ds26522".
+- reg: SPI CS.
+- spi-max-frequency: SPI clock.
+
+Example:
+	slic@1 {
+		compatible = "maxim,ds26522";
+		reg = <1>;
+		spi-max-frequency = <2000000>; /* input clock */
+	};
diff --git a/arch/powerpc/boot/dts/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/t104xd4rdb.dtsi
index 491367bd3883..3f6d7c6a106b 100644
--- a/arch/powerpc/boot/dts/t104xd4rdb.dtsi
+++ b/arch/powerpc/boot/dts/t104xd4rdb.dtsi
@@ -109,6 +109,16 @@ flash@0 {
 				/* input clock */
 				spi-max-frequency = <10000000>;
 			};
+			slic@1 {
+				compatible = "maxim,ds26522";
+				reg = <1>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
 		};
 		i2c@118000 {
 			hwmon@4c {

From 072daeed5525a0d8ad1e5ddfb38f29cef1ca25f2 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Mon, 24 Aug 2015 11:43:03 -0500
Subject: [PATCH 05/38] powerpc/fsl_pci: Check for
 get_user/probe_kernel_address failure

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hongtao Jia <hongtao.jia@freescale.com>
---
 arch/powerpc/sysdev/fsl_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ebc1f412cf49..c42609dde8d2 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1002,7 +1002,7 @@ int fsl_pci_mcheck_exception(struct pt_regs *regs)
 			ret = probe_kernel_address(regs->nip, inst);
 		}
 
-		if (mcheck_handle_load(regs, inst)) {
+		if (!ret && mcheck_handle_load(regs, inst)) {
 			regs->nip += 4;
 			return 1;
 		}

From c383ee84e1d575b09d167185d15df24bde25eb15 Mon Sep 17 00:00:00 2001
From: Andy Fleming <afleming@gmail.com>
Date: Wed, 2 Sep 2015 13:07:58 -0500
Subject: [PATCH 06/38] powerpc/85xx: Add support for Varisys Cyrus board

This board uses a P5020 chip, and boots just fine using
the corenet_generic code. The device tree is very similar to the
P5020DS, except that there is no Flash memory. The environment is,
instead, stored on an MMC card on the motherboard.

Signed-off-by: Andy Fleming <afleming@gmail.com>
[scottwood: fixed trailing whitespace]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/cyrus_p5020.dts         | 155 ++++++++++++++++++
 arch/powerpc/platforms/85xx/corenet_generic.c |   1 +
 2 files changed, 156 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/cyrus_p5020.dts

diff --git a/arch/powerpc/boot/dts/cyrus_p5020.dts b/arch/powerpc/boot/dts/cyrus_p5020.dts
new file mode 100644
index 000000000000..76e1fdf9d3b8
--- /dev/null
+++ b/arch/powerpc/boot/dts/cyrus_p5020.dts
@@ -0,0 +1,155 @@
+/*
+ * Cyrus 5020 Device Tree Source, based on p5020ds.dts
+ *
+ * Copyright 2015 Andy Fleming
+ *
+ * p5020ds.dts copyright:
+ * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p5020si-pre.dtsi"
+
+/ {
+	model = "varisys,CYRUS";
+	compatible = "varisys,CYRUS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+		};
+
+		i2c@118100 {
+		};
+
+		i2c@119100 {
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		reg = <0xf 0xfe203000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/p5020si-post.dtsi"
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 99412b32586d..3a8be47c0e3a 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -161,6 +161,7 @@ static const char * const boards[] __initconst = {
 	"fsl,T1042RDB",
 	"fsl,T1042RDB_PI",
 	"keymile,kmcoge4",
+	"varisys,CYRUS",
 	NULL
 };
 

From 2d80f651c87c7652c3db109030da4ecfcb166eed Mon Sep 17 00:00:00 2001
From: poonam aggrwal <poonam.aggrwal@freescale.com>
Date: Thu, 10 Sep 2015 07:31:20 +0530
Subject: [PATCH 07/38] powerpc/b4860: Removed LIODN register from sRIO node

In case of B4860 LIODN register for sRIO is not in GUTs block but in
the sRIO register space.

Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index 9ba904be39ee..d1e26a7407d5 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -51,14 +51,12 @@ port1 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <1>;
-		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
 	};
 
 	port2 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		cell-index = <2>;
-		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
 	};
 };
 

From dc37374b9c83382b91f3804845ae593bedc2d13a Mon Sep 17 00:00:00 2001
From: Hongtao Jia <hongtao.jia@freescale.com>
Date: Fri, 18 Sep 2015 12:00:24 +0800
Subject: [PATCH 08/38] powerpc/fsl: Move Freescale device tree files into fsl
 folder

It makes no sense that some Freescale device tree files are in fsl
directory while some others not. This patch move Freescale device tree
files into fsl folder. To do that the following two steps are made:
- Move Freescale device tree files into fsl folder.
- Update the include path in these files from "fsl/*.dtsi" to "*.dtsi".

Please add "fsl/" prefix when you make dtb using Makefile.

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
[scottwood: fixed cuImage rule]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/Makefile                                 | 3 +++
 arch/powerpc/boot/dts/{ => fsl}/b4420qds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/b4860qds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/b4qds.dtsi                 | 2 +-
 arch/powerpc/boot/dts/{ => fsl}/bsc9131rdb.dts             | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/bsc9131rdb.dtsi            | 0
 arch/powerpc/boot/dts/{ => fsl}/bsc9132qds.dts             | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/bsc9132qds.dtsi            | 0
 arch/powerpc/boot/dts/{ => fsl}/c293pcie.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/cyrus_p5020.dts            | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/ge_imp3a.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/kmcoge4.dts                | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8536ds.dts              | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8536ds.dtsi             | 0
 arch/powerpc/boot/dts/{ => fsl}/mpc8536ds_36b.dts          | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8540ads.dts             | 2 +-
 arch/powerpc/boot/dts/{ => fsl}/mpc8541cds.dts             | 2 +-
 arch/powerpc/boot/dts/{ => fsl}/mpc8544ds.dts              | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8544ds.dtsi             | 0
 arch/powerpc/boot/dts/{ => fsl}/mpc8548cds.dtsi            | 0
 arch/powerpc/boot/dts/{ => fsl}/mpc8548cds_32b.dts         | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8548cds_36b.dts         | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8555cds.dts             | 2 +-
 arch/powerpc/boot/dts/{ => fsl}/mpc8560ads.dts             | 2 +-
 arch/powerpc/boot/dts/{ => fsl}/mpc8568mds.dts             | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8569mds.dts             | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8572ds.dts              | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8572ds.dtsi             | 0
 arch/powerpc/boot/dts/{ => fsl}/mpc8572ds_36b.dts          | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/mpc8572ds_camp_core0.dts   | 0
 arch/powerpc/boot/dts/{ => fsl}/mpc8572ds_camp_core1.dts   | 0
 arch/powerpc/boot/dts/{ => fsl}/mvme2500.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/oca4080.dts                | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pa.dts            | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pa.dtsi           | 0
 arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pa_36b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pb.dts            | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pb_36b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1010rdb.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/p1010rdb_32b.dtsi          | 0
 arch/powerpc/boot/dts/{ => fsl}/p1010rdb_36b.dtsi          | 0
 arch/powerpc/boot/dts/{ => fsl}/p1020mbg-pc.dtsi           | 0
 arch/powerpc/boot/dts/{ => fsl}/p1020mbg-pc_32b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1020mbg-pc_36b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc.dtsi           | 0
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc_32b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc_36b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc_camp_core0.dts | 0
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc_camp_core1.dts | 0
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pd.dts            | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/p1020rdb_36b.dts           | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1020utm-pc.dtsi           | 0
 arch/powerpc/boot/dts/{ => fsl}/p1020utm-pc_32b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1020utm-pc_36b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1021mds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1021rdb-pc.dtsi           | 0
 arch/powerpc/boot/dts/{ => fsl}/p1021rdb-pc_32b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1021rdb-pc_36b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1022ds.dtsi               | 0
 arch/powerpc/boot/dts/{ => fsl}/p1022ds_32b.dts            | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1022ds_36b.dts            | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1022rdk.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1023rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1024rdb.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/p1024rdb_32b.dts           | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1024rdb_36b.dts           | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1025rdb.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/p1025rdb_32b.dts           | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1025rdb_36b.dts           | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1025twr.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p1025twr.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/p2020ds.dts                | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p2020ds.dtsi               | 0
 arch/powerpc/boot/dts/{ => fsl}/p2020rdb-pc.dtsi           | 0
 arch/powerpc/boot/dts/{ => fsl}/p2020rdb-pc_32b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p2020rdb-pc_36b.dts        | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p2020rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p2041rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p3041ds.dts                | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p4080ds.dts                | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p5020ds.dts                | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/p5040ds.dts                | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/ppa8548.dts                | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1023rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1024qds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1024rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1040d4rdb.dts             | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1040qds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1040rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1042d4rdb.dts             | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1042qds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1042rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t1042rdb_pi.dts            | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t104xd4rdb.dtsi            | 0
 arch/powerpc/boot/dts/{ => fsl}/t104xqds.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/t104xrdb.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/t2080qds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t2080rdb.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t2081qds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t208xqds.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/t208xrdb.dtsi              | 0
 arch/powerpc/boot/dts/{ => fsl}/t4240qds.dts               | 4 ++--
 arch/powerpc/boot/dts/{ => fsl}/t4240rdb.dts               | 4 ++--
 105 files changed, 146 insertions(+), 143 deletions(-)
 rename arch/powerpc/boot/dts/{ => fsl}/b4420qds.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/b4860qds.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/b4qds.dtsi (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/bsc9131rdb.dts (91%)
 rename arch/powerpc/boot/dts/{ => fsl}/bsc9131rdb.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/bsc9132qds.dts (91%)
 rename arch/powerpc/boot/dts/{ => fsl}/bsc9132qds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/c293pcie.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/cyrus_p5020.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/ge_imp3a.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/kmcoge4.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8536ds.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8536ds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8536ds_36b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8540ads.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8541cds.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8544ds.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8544ds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8548cds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8548cds_32b.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8548cds_36b.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8555cds.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8560ads.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8568mds.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8569mds.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8572ds.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8572ds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8572ds_36b.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8572ds_camp_core0.dts (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/mpc8572ds_camp_core1.dts (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/mvme2500.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/oca4080.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pa.dts (88%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pa.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pa_36b.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pb.dts (89%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1010rdb-pb_36b.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1010rdb.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1010rdb_32b.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1010rdb_36b.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020mbg-pc.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020mbg-pc_32b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020mbg-pc_36b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc_32b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc_36b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc_camp_core0.dts (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pc_camp_core1.dts (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb-pd.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb.dts (95%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020rdb_36b.dts (95%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020utm-pc.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020utm-pc_32b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1020utm-pc_36b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1021mds.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1021rdb-pc.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1021rdb-pc_32b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1021rdb-pc_36b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1022ds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1022ds_32b.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1022ds_36b.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1022rdk.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1023rdb.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1024rdb.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1024rdb_32b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1024rdb_36b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1025rdb.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1025rdb_32b.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1025rdb_36b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1025twr.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p1025twr.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p2020ds.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/p2020ds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p2020rdb-pc.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/p2020rdb-pc_32b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p2020rdb-pc_36b.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/p2020rdb.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/p2041rdb.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/p3041ds.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/p4080ds.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/p5020ds.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/p5040ds.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/ppa8548.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1023rdb.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1024qds.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1024rdb.dts (98%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1040d4rdb.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1040qds.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1040rdb.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1042d4rdb.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1042qds.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1042rdb.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t1042rdb_pi.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t104xd4rdb.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/t104xqds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/t104xrdb.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/t2080qds.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t2080rdb.dts (97%)
 rename arch/powerpc/boot/dts/{ => fsl}/t2081qds.dts (96%)
 rename arch/powerpc/boot/dts/{ => fsl}/t208xqds.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/t208xrdb.dtsi (100%)
 rename arch/powerpc/boot/dts/{ => fsl}/t4240qds.dts (99%)
 rename arch/powerpc/boot/dts/{ => fsl}/t4240rdb.dts (98%)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4eec430d8fa8..99e4487248ff 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -364,6 +364,9 @@ $(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 
+$(obj)/cuImage.%: vmlinux $(obj)/fsl/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/fsl/$*.dtb)
+
 $(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
 	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
diff --git a/arch/powerpc/boot/dts/b4420qds.dts b/arch/powerpc/boot/dts/fsl/b4420qds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/b4420qds.dts
rename to arch/powerpc/boot/dts/fsl/b4420qds.dts
index 508dbdf33c81..cd9203ceedc0 100644
--- a/arch/powerpc/boot/dts/b4420qds.dts
+++ b/arch/powerpc/boot/dts/fsl/b4420qds.dts
@@ -32,7 +32,7 @@
  * this software, even if advised of the possibility of such damage.
  */
 
-/include/ "fsl/b4420si-pre.dtsi"
+/include/ "b4420si-pre.dtsi"
 /include/ "b4qds.dtsi"
 
 / {
@@ -47,4 +47,4 @@ board-control@3,0 {
 
 };
 
-/include/ "fsl/b4420si-post.dtsi"
+/include/ "b4420si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts
similarity index 97%
rename from arch/powerpc/boot/dts/b4860qds.dts
rename to arch/powerpc/boot/dts/fsl/b4860qds.dts
index 6bb3707ffe3d..ba8c9bea33ac 100644
--- a/arch/powerpc/boot/dts/b4860qds.dts
+++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/b4860si-pre.dtsi"
+/include/ "b4860si-pre.dtsi"
 /include/ "b4qds.dtsi"
 
 / {
@@ -58,4 +58,4 @@ port2 {
 
 };
 
-/include/ "fsl/b4860si-post.dtsi"
+/include/ "b4860si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
similarity index 99%
rename from arch/powerpc/boot/dts/b4qds.dtsi
rename to arch/powerpc/boot/dts/fsl/b4qds.dtsi
index 559d00657fb5..64557742fb99 100644
--- a/arch/powerpc/boot/dts/b4qds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
@@ -229,4 +229,4 @@ pcie@0 {
 
 };
 
-/include/ "fsl/b4si-post.dtsi"
+/include/ "b4si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dts b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts
similarity index 91%
rename from arch/powerpc/boot/dts/bsc9131rdb.dts
rename to arch/powerpc/boot/dts/fsl/bsc9131rdb.dts
index e13d2d4877b0..26366e6ff657 100644
--- a/arch/powerpc/boot/dts/bsc9131rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/bsc9131si-pre.dtsi"
+/include/ "bsc9131si-pre.dtsi"
 
 / {
 	model = "fsl,bsc9131rdb";
@@ -31,4 +31,4 @@ board_soc: soc: soc@ff700000 {
 };
 
 /include/ "bsc9131rdb.dtsi"
-/include/ "fsl/bsc9131si-post.dtsi"
+/include/ "bsc9131si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/bsc9131rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
similarity index 91%
rename from arch/powerpc/boot/dts/bsc9132qds.dts
rename to arch/powerpc/boot/dts/fsl/bsc9132qds.dts
index 6cab1062bc74..70882ade606d 100644
--- a/arch/powerpc/boot/dts/bsc9132qds.dts
+++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/bsc9132si-pre.dtsi"
+/include/ "bsc9132si-pre.dtsi"
 
 / {
 	model = "fsl,bsc9132qds";
@@ -32,4 +32,4 @@ soc: soc@ff700000 {
 };
 
 /include/ "bsc9132qds.dtsi"
-/include/ "fsl/bsc9132si-post.dtsi"
+/include/ "bsc9132si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/bsc9132qds.dtsi
rename to arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts
similarity index 98%
rename from arch/powerpc/boot/dts/c293pcie.dts
rename to arch/powerpc/boot/dts/fsl/c293pcie.dts
index 6681cc21030b..53ab4db9e79c 100644
--- a/arch/powerpc/boot/dts/c293pcie.dts
+++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/c293si-pre.dtsi"
+/include/ "c293si-pre.dtsi"
 
 / {
 	model = "fsl,C293PCIE";
@@ -221,4 +221,4 @@ enet1: ethernet@b1000 {
 		phy-connection-type = "rgmii-id";
 	};
 };
-/include/ "fsl/c293si-post.dtsi"
+/include/ "c293si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/cyrus_p5020.dts b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts
similarity index 98%
rename from arch/powerpc/boot/dts/cyrus_p5020.dts
rename to arch/powerpc/boot/dts/fsl/cyrus_p5020.dts
index 76e1fdf9d3b8..c6033909db60 100644
--- a/arch/powerpc/boot/dts/cyrus_p5020.dts
+++ b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts
@@ -12,7 +12,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p5020si-pre.dtsi"
+/include/ "p5020si-pre.dtsi"
 
 / {
 	model = "varisys,CYRUS";
@@ -152,4 +152,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p5020si-post.dtsi"
+/include/ "p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/ge_imp3a.dts b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
similarity index 98%
rename from arch/powerpc/boot/dts/ge_imp3a.dts
rename to arch/powerpc/boot/dts/fsl/ge_imp3a.dts
index fefae416a097..a2bb47f4edbe 100644
--- a/arch/powerpc/boot/dts/ge_imp3a.dts
+++ b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
@@ -12,7 +12,7 @@
  * Copyright 2009 Freescale Semiconductor Inc.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "GE_IMP3A";
@@ -252,4 +252,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
similarity index 98%
rename from arch/powerpc/boot/dts/kmcoge4.dts
rename to arch/powerpc/boot/dts/fsl/kmcoge4.dts
index 48dab6a50437..6858ec9ef295 100644
--- a/arch/powerpc/boot/dts/kmcoge4.dts
+++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
@@ -12,7 +12,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p2041si-pre.dtsi"
+/include/ "p2041si-pre.dtsi"
 
 / {
 	model = "keymile,kmcoge4";
@@ -176,4 +176,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p2041si-post.dtsi"
+/include/ "p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8536ds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8536ds.dts
index 19736222a0b9..96cdce841205 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8536si-pre.dtsi"
+/include/ "mpc8536si-pre.dtsi"
 
 / {
 	model = "fsl,mpc8536ds";
@@ -105,5 +105,5 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536si-post.dtsi"
 /include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8536ds.dtsi
rename to arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8536ds_36b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts
index 6c723ee108cd..38d326ce92d8 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8536si-pre.dtsi"
+/include/ "mpc8536si-pre.dtsi"
 
 / {
 	model = "fsl,mpc8536ds";
@@ -105,5 +105,5 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536si-post.dtsi"
 /include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8540ads.dts
rename to arch/powerpc/boot/dts/fsl/mpc8540ads.dts
index 7ce274c9a2d5..e6d0b166d68d 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts
@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
 
 / {
 	model = "MPC8540ADS";
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8541cds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8541cds.dts
index 4d35a3e0fb02..9fa2c734a988 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts
@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
 
 / {
 	model = "MPC8541CDS";
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts
similarity index 97%
rename from arch/powerpc/boot/dts/mpc8544ds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8544ds.dts
index ed38874c3a36..5a6e46861ab5 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8544si-pre.dtsi"
+/include/ "mpc8544si-pre.dtsi"
 
 / {
 	model = "MPC8544DS";
@@ -103,5 +103,5 @@ pcie@0 {
  * for interrupt-map & interrupt-map-mask
  */
 
-/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544si-post.dtsi"
 /include/ "mpc8544ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8544ds.dtsi
rename to arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8548cds.dtsi
rename to arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi
diff --git a/arch/powerpc/boot/dts/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts
similarity index 96%
rename from arch/powerpc/boot/dts/mpc8548cds_32b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts
index 6fd63163fc6b..e4620bb192f4 100644
--- a/arch/powerpc/boot/dts/mpc8548cds_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
 
 / {
 	model = "MPC8548CDS";
@@ -82,5 +82,5 @@ port1 {
  * for interrupt-map & interrupt-map-mask.
  */
 
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
 /include/ "mpc8548cds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts
similarity index 96%
rename from arch/powerpc/boot/dts/mpc8548cds_36b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts
index 10e551b11bd6..bca7c09d3edf 100644
--- a/arch/powerpc/boot/dts/mpc8548cds_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
 
 / {
 	model = "MPC8548CDS";
@@ -82,5 +82,5 @@ port1 {
  * for interrupt-map & interrupt-map-mask.
  */
 
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
 /include/ "mpc8548cds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8555cds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8555cds.dts
index f115f21cb0ae..272f08caea92 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts
@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
 
 / {
 	model = "MPC8555CDS";
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8560ads.dts
rename to arch/powerpc/boot/dts/fsl/mpc8560ads.dts
index 0d70921d6125..7a822b08aa35 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts
@@ -11,7 +11,7 @@
 
 /dts-v1/;
 
-/include/ "fsl/e500v2_power_isa.dtsi"
+/include/ "e500v2_power_isa.dtsi"
 
 / {
 	model = "MPC8560ADS";
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8568mds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8568mds.dts
index bead2b655b9f..01706a339603 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8568si-pre.dtsi"
+/include/ "mpc8568si-pre.dtsi"
 
 / {
 	model = "MPC8568EMDS";
@@ -311,4 +311,4 @@ red {
 	};
 };
 
-/include/ "fsl/mpc8568si-post.dtsi"
+/include/ "mpc8568si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/mpc8569mds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8569mds.dts
index d0dcdafa5eb2..a95ff7d2392c 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8569si-pre.dtsi"
+/include/ "mpc8569si-pre.dtsi"
 
 / {
 	model = "MPC8569EMDS";
@@ -444,4 +444,4 @@ port2 {
 	};
 };
 
-/include/ "fsl/mpc8569si-post.dtsi"
+/include/ "mpc8569si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/mpc8572ds.dts
rename to arch/powerpc/boot/dts/fsl/mpc8572ds.dts
index 0c9f2955deb4..8ee5b24cc59e 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8572si-pre.dtsi"
+/include/ "mpc8572si-pre.dtsi"
 
 / {
 	model = "fsl,MPC8572DS";
@@ -86,5 +86,5 @@ pcie@0 {
  * for interrupt-map & interrupt-map-mask
  */
 
-/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572si-post.dtsi"
 /include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8572ds.dtsi
rename to arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts
similarity index 96%
rename from arch/powerpc/boot/dts/mpc8572ds_36b.dts
rename to arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts
index 6c3d0b305e1b..5c48b464669b 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8572si-pre.dtsi"
+/include/ "mpc8572si-pre.dtsi"
 
 / {
 	model = "fsl,MPC8572DS";
@@ -86,5 +86,5 @@ pcie@0 {
  * for interrupt-map & interrupt-map-mask
  */
 
-/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572si-post.dtsi"
 /include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
rename to arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts
similarity index 100%
rename from arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
rename to arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts
diff --git a/arch/powerpc/boot/dts/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts
similarity index 98%
rename from arch/powerpc/boot/dts/mvme2500.dts
rename to arch/powerpc/boot/dts/fsl/mvme2500.dts
index 67714cf0f745..c7bc1a0c7194 100644
--- a/arch/powerpc/boot/dts/mvme2500.dts
+++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts
@@ -12,7 +12,7 @@
  * Copyright 2009 Freescale Semiconductor Inc.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "MVME2500";
@@ -258,7 +258,7 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
 
 / {
 	soc@ffe00000 {
diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/fsl/oca4080.dts
similarity index 98%
rename from arch/powerpc/boot/dts/oca4080.dts
rename to arch/powerpc/boot/dts/fsl/oca4080.dts
index 42796c5b0561..17bc6f391248 100644
--- a/arch/powerpc/boot/dts/oca4080.dts
+++ b/arch/powerpc/boot/dts/fsl/oca4080.dts
@@ -36,7 +36,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p4080si-pre.dtsi"
+/include/ "p4080si-pre.dtsi"
 
 / {
 	model = "fsl,OCA4080";
@@ -142,4 +142,4 @@ pci2: pcie@ffe202000 {
 	};
 };
 
-/include/ "fsl/p4080si-post.dtsi"
+/include/ "p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts
similarity index 88%
rename from arch/powerpc/boot/dts/p1010rdb-pa.dts
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts
index 767d4c032857..e4ab53c4ab50 100644
--- a/arch/powerpc/boot/dts/p1010rdb-pa.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB";
@@ -20,4 +20,4 @@ / {
 
 /include/ "p1010rdb.dtsi"
 /include/ "p1010rdb-pa.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1010rdb-pa.dtsi
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi
diff --git a/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts
similarity index 96%
rename from arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts
index 3033371bc007..03bd76ca8406 100644
--- a/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB";
@@ -43,4 +43,4 @@ / {
 
 /include/ "p1010rdb.dtsi"
 /include/ "p1010rdb-pa.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
similarity index 89%
rename from arch/powerpc/boot/dts/p1010rdb-pb.dts
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
index 6eeb7d3185be..37681fda4b7d 100644
--- a/arch/powerpc/boot/dts/p1010rdb-pb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB-PB";
@@ -32,4 +32,4 @@ &phy2 {
 	interrupts = <1 1 0 0>;
 };
 
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
similarity index 96%
rename from arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
index 7ab3c907b326..4cf255fedc96 100644
--- a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1010si-pre.dtsi"
+/include/ "p1010si-pre.dtsi"
 
 / {
 	model = "fsl,P1010RDB-PB";
@@ -55,4 +55,4 @@ &phy2 {
 	interrupts = <1 1 0 0>;
 };
 
-/include/ "fsl/p1010si-post.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1010rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1010rdb_32b.dtsi
rename to arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1010rdb_36b.dtsi
rename to arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi
diff --git a/arch/powerpc/boot/dts/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1020mbg-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi
diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020mbg-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts
index ab8f076eae90..b29d1fcb5e6b 100644
--- a/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020MBG-PC";
 	compatible = "fsl,P1020MBG-PC";
@@ -86,4 +86,4 @@ pcie@0 {
 };
 
 /include/ "p1020mbg-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020mbg-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts
index 9e9f401419b1..678d0eec24e2 100644
--- a/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020MBG-PC";
 	compatible = "fsl,P1020MBG-PC";
@@ -86,4 +86,4 @@ pcie@0 {
 };
 
 /include/ "p1020mbg-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1020rdb-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts
index 4de69b726dc5..8175bf6f3e9c 100644
--- a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB-PC";
 	compatible = "fsl,P1020RDB-PC";
@@ -87,4 +87,4 @@ pcie@0 {
 };
 
 /include/ "p1020rdb-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts
index 5237da7441bc..01c305795163 100644
--- a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB-PC";
 	compatible = "fsl,P1020RDB-PC";
@@ -87,4 +87,4 @@ pcie@0 {
 };
 
 /include/ "p1020rdb-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts
similarity index 100%
rename from arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts
diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts
similarity index 100%
rename from arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts
diff --git a/arch/powerpc/boot/dts/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p1020rdb-pd.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
index c7c64162a309..740553c090a3 100644
--- a/arch/powerpc/boot/dts/p1020rdb-pd.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB-PD";
 	compatible = "fsl,P1020RDB-PD";
@@ -289,4 +289,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/fsl/p1020rdb.dts
similarity index 95%
rename from arch/powerpc/boot/dts/p1020rdb.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb.dts
index 518bf99b1f50..81362252bc8c 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB";
 	compatible = "fsl,P1020RDB";
@@ -63,4 +63,4 @@ pcie@0 {
 };
 
 /include/ "p1020rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1020rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts
similarity index 95%
rename from arch/powerpc/boot/dts/p1020rdb_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts
index bdbdb6097e57..74471e3ca136 100644
--- a/arch/powerpc/boot/dts/p1020rdb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020RDB";
 	compatible = "fsl,P1020RDB";
@@ -63,4 +63,4 @@ pcie@0 {
 };
 
 /include/ "p1020rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020utm-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1020utm-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi
diff --git a/arch/powerpc/boot/dts/p1020utm-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020utm-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts
index 4bfdd8971cdb..bc03ef611f98 100644
--- a/arch/powerpc/boot/dts/p1020utm-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020UTM-PC";
 	compatible = "fsl,P1020UTM-PC";
@@ -86,4 +86,4 @@ pcie@0 {
 };
 
 /include/ "p1020utm-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020utm-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1020utm-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts
index abec53557501..32766f6a475e 100644
--- a/arch/powerpc/boot/dts/p1020utm-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1020UTM-PC";
 	compatible = "fsl,P1020UTM-PC";
@@ -86,4 +86,4 @@ pcie@0 {
 };
 
 /include/ "p1020utm-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p1021mds.dts
rename to arch/powerpc/boot/dts/fsl/p1021mds.dts
index 76559044df41..27fdfd7dc7c7 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1021";
 	compatible = "fsl,P1021MDS";
@@ -320,4 +320,4 @@ enet4: ucc@2400 {
 	};
 };
 
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1021rdb-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts
index 7cefa12b629a..d2b4710357ac 100644
--- a/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1021RDB";
 	compatible = "fsl,P1021RDB-PC";
@@ -93,4 +93,4 @@ qe: qe@ffe80000 {
 };
 
 /include/ "p1021rdb-pc.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts
index 53d0c889039c..e298c29e5606 100644
--- a/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1021RDB";
 	compatible = "fsl,P1021RDB-PC";
@@ -93,4 +93,4 @@ qe: qe@fffe80000 {
 };
 
 /include/ "p1021rdb-pc.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1022ds.dtsi
rename to arch/powerpc/boot/dts/fsl/p1022ds.dtsi
diff --git a/arch/powerpc/boot/dts/p1022ds_32b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p1022ds_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1022ds_32b.dts
index d96cae00a9e3..5a7eaceb9e8e 100644
--- a/arch/powerpc/boot/dts/p1022ds_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
 / {
 	model = "fsl,P1022DS";
 	compatible = "fsl,P1022DS";
@@ -99,5 +99,5 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
 /include/ "p1022ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022ds_36b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p1022ds_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1022ds_36b.dts
index f7aacce40bf6..88063cd9e20a 100644
--- a/arch/powerpc/boot/dts/p1022ds_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
 / {
 	model = "fsl,P1022DS";
 	compatible = "fsl,P1022DS";
@@ -99,5 +99,5 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
 /include/ "p1022ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p1022rdk.dts
rename to arch/powerpc/boot/dts/fsl/p1022rdk.dts
index 51d82de223f3..04c16337268a 100644
--- a/arch/powerpc/boot/dts/p1022rdk.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1022si-pre.dtsi"
+/include/ "p1022si-pre.dtsi"
 / {
 	model = "fsl,P1022RDK";
 	compatible = "fsl,P1022RDK";
@@ -185,4 +185,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1023rdb.dts b/arch/powerpc/boot/dts/fsl/p1023rdb.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p1023rdb.dts
rename to arch/powerpc/boot/dts/fsl/p1023rdb.dts
index 05a00a4d2861..9716ca64651c 100644
--- a/arch/powerpc/boot/dts/p1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1023rdb.dts
@@ -34,7 +34,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1023si-pre.dtsi"
+/include/ "p1023si-pre.dtsi"
 
 / {
 	model = "fsl,P1023";
@@ -257,4 +257,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p1023si-post.dtsi"
+/include/ "p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1024rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1024rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1024rdb_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts
index 90e803e9ba5f..8b09b9d56ad1 100644
--- a/arch/powerpc/boot/dts/p1024rdb_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1024RDB";
 	compatible = "fsl,P1024RDB";
@@ -84,4 +84,4 @@ pcie@0 {
 };
 
 /include/ "p1024rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1024rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1024rdb_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts
index 3656825b65a1..e7093aef28f1 100644
--- a/arch/powerpc/boot/dts/p1024rdb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1020si-pre.dtsi"
+/include/ "p1020si-pre.dtsi"
 / {
 	model = "fsl,P1024RDB";
 	compatible = "fsl,P1024RDB";
@@ -84,4 +84,4 @@ pcie@0 {
 };
 
 /include/ "p1024rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1025rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
diff --git a/arch/powerpc/boot/dts/p1025rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p1025rdb_32b.dts
rename to arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
index a2ed6280ba7a..b15acbaea34b 100644
--- a/arch/powerpc/boot/dts/p1025rdb_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1025RDB";
 	compatible = "fsl,P1025RDB";
@@ -130,4 +130,4 @@ enet4: ucc@2400 {
 };
 
 /include/ "p1025rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1025rdb_36b.dts
rename to arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts
index 06deb6f341ba..b0ded5e8bd0b 100644
--- a/arch/powerpc/boot/dts/p1025rdb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1025RDB";
 	compatible = "fsl,P1025RDB";
@@ -90,4 +90,4 @@ qe: qe@fffe80000 {
 };
 
 /include/ "p1025rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/fsl/p1025twr.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p1025twr.dts
rename to arch/powerpc/boot/dts/fsl/p1025twr.dts
index 9036a4987905..9b8863b74b60 100644
--- a/arch/powerpc/boot/dts/p1025twr.dts
+++ b/arch/powerpc/boot/dts/fsl/p1025twr.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p1021si-pre.dtsi"
+/include/ "p1021si-pre.dtsi"
 / {
 	model = "fsl,P1025";
 	compatible = "fsl,TWR-P1025";
@@ -92,4 +92,4 @@ qe: qe@ffe80000 {
 };
 
 /include/ "p1025twr.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p1025twr.dtsi
rename to arch/powerpc/boot/dts/fsl/p1025twr.dtsi
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/fsl/p2020ds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/p2020ds.dts
rename to arch/powerpc/boot/dts/fsl/p2020ds.dts
index 237310cc7e6c..5ba06f753bc5 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020ds.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020DS";
@@ -85,5 +85,5 @@ pcie@0 {
  * for interrupt-map & interrupt-map-mask
  */
 
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
 /include/ "p2020ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p2020ds.dtsi
rename to arch/powerpc/boot/dts/fsl/p2020ds.dtsi
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/p2020rdb-pc.dtsi
rename to arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
rename to arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts
index 57573bd52caa..d3295c204bbf 100644
--- a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020RDB";
@@ -93,4 +93,4 @@ pcie@0 {
 };
 
 /include/ "p2020rdb-pc.dtsi"
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts
similarity index 97%
rename from arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
rename to arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts
index 470247ea68b4..9307a8f41ddb 100644
--- a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020RDB";
@@ -93,4 +93,4 @@ pcie@0 {
 };
 
 /include/ "p2020rdb-pc.dtsi"
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p2020rdb.dts
rename to arch/powerpc/boot/dts/fsl/p2020rdb.dts
index 4d52bce1d5b0..70cf09019ce5 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/p2020si-pre.dtsi"
+/include/ "p2020si-pre.dtsi"
 
 / {
 	model = "fsl,P2020RDB";
@@ -288,4 +288,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p2041rdb.dts
rename to arch/powerpc/boot/dts/fsl/p2041rdb.dts
index d2bb0765bd5a..e9bd89406c4c 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p2041si-pre.dtsi"
+/include/ "p2041si-pre.dtsi"
 
 / {
 	model = "fsl,P2041RDB";
@@ -247,4 +247,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p2041si-post.dtsi"
+/include/ "p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p3041ds.dts
rename to arch/powerpc/boot/dts/fsl/p3041ds.dts
index eca6c697cfd7..f2b1d40334d4 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p3041si-pre.dtsi"
+/include/ "p3041si-pre.dtsi"
 
 / {
 	model = "fsl,P3041DS";
@@ -281,4 +281,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p3041si-post.dtsi"
+/include/ "p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p4080ds.dts
rename to arch/powerpc/boot/dts/fsl/p4080ds.dts
index 4f80c9d02c27..28a55c5e7099 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p4080si-pre.dtsi"
+/include/ "p4080si-pre.dtsi"
 
 / {
 	model = "fsl,P4080DS";
@@ -215,4 +215,4 @@ pcie@0 {
 
 };
 
-/include/ "fsl/p4080si-post.dtsi"
+/include/ "p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/p5020ds.dts
rename to arch/powerpc/boot/dts/fsl/p5020ds.dts
index d0309a8b9749..920dc77b9c43 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/p5020si-pre.dtsi"
+/include/ "p5020si-pre.dtsi"
 
 / {
 	model = "fsl,P5020DS";
@@ -281,4 +281,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p5020si-post.dtsi"
+/include/ "p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts
similarity index 98%
rename from arch/powerpc/boot/dts/p5040ds.dts
rename to arch/powerpc/boot/dts/fsl/p5040ds.dts
index 05168236d3ab..e169cc297ea3 100644
--- a/arch/powerpc/boot/dts/p5040ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts
@@ -32,7 +32,7 @@
  * software, even if advised of the possibility of such damage.
  */
 
-/include/ "fsl/p5040si-pre.dtsi"
+/include/ "p5040si-pre.dtsi"
 
 / {
 	model = "fsl,P5040DS";
@@ -251,4 +251,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/p5040si-post.dtsi"
+/include/ "p5040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/ppa8548.dts b/arch/powerpc/boot/dts/fsl/ppa8548.dts
similarity index 97%
rename from arch/powerpc/boot/dts/ppa8548.dts
rename to arch/powerpc/boot/dts/fsl/ppa8548.dts
index 27b0699ee923..8f9ffbe0e4f4 100644
--- a/arch/powerpc/boot/dts/ppa8548.dts
+++ b/arch/powerpc/boot/dts/fsl/ppa8548.dts
@@ -12,7 +12,7 @@
  * option) any later version.
  */
 
-/include/ "fsl/mpc8548si-pre.dtsi"
+/include/ "mpc8548si-pre.dtsi"
 
 / {
 	model = "ppa8548";
@@ -161,4 +161,4 @@ crypto@30000 {
 	};
 };
 
-/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
similarity index 98%
rename from arch/powerpc/boot/dts/t1023rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1023rdb.dts
index d3fa8294cd49..2b2fff4a12a2 100644
--- a/arch/powerpc/boot/dts/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
 
 / {
 	model = "fsl,T1023RDB";
@@ -159,4 +159,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/t1023si-post.dtsi"
+/include/ "t1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts
similarity index 98%
rename from arch/powerpc/boot/dts/t1024qds.dts
rename to arch/powerpc/boot/dts/fsl/t1024qds.dts
index f31fabb383b9..43cd5b50cd0a 100644
--- a/arch/powerpc/boot/dts/t1024qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
 
 / {
 	model = "fsl,T1024QDS";
@@ -248,4 +248,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/t1024si-post.dtsi"
+/include/ "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
similarity index 98%
rename from arch/powerpc/boot/dts/t1024rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1024rdb.dts
index bf05e324fda2..429d8c73650a 100644
--- a/arch/powerpc/boot/dts/t1024rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t102xsi-pre.dtsi"
+/include/ "t102xsi-pre.dtsi"
 
 / {
 	model = "fsl,T1024RDB";
@@ -188,4 +188,4 @@ pcie@0 {
 	};
 };
 
-/include/ "fsl/t1024si-post.dtsi"
+/include/ "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1040d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t1040d4rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
index 2d1315a1670e..681746efd31d 100644
--- a/arch/powerpc/boot/dts/t1040d4rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xd4rdb.dtsi"
 
 / {
@@ -43,4 +43,4 @@ / {
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1040qds.dts b/arch/powerpc/boot/dts/fsl/t1040qds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t1040qds.dts
rename to arch/powerpc/boot/dts/fsl/t1040qds.dts
index 973c29c2f56e..4d298659468c 100644
--- a/arch/powerpc/boot/dts/t1040qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xqds.dtsi"
 
 / {
@@ -43,4 +43,4 @@ / {
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t1040rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1040rdb.dts
index 79a0bed04c1a..8f9e65b47515 100644
--- a/arch/powerpc/boot/dts/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xrdb.dtsi"
 
 / {
@@ -45,4 +45,4 @@ cpld@3,0 {
 	};
 };
 
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t1042d4rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
index 846f8c87e85a..b245b31b8279 100644
--- a/arch/powerpc/boot/dts/t1042d4rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xd4rdb.dtsi"
 
 / {
@@ -50,4 +50,4 @@ cpld@3,0 {
 	};
 };
 
-/include/ "fsl/t1040si-post.dtsi"
+/include/ "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042qds.dts b/arch/powerpc/boot/dts/fsl/t1042qds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t1042qds.dts
rename to arch/powerpc/boot/dts/fsl/t1042qds.dts
index 45bd03752154..4ab9bbe7c5c5 100644
--- a/arch/powerpc/boot/dts/t1042qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xqds.dtsi"
 
 / {
@@ -43,4 +43,4 @@ / {
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t1042rdb.dts
rename to arch/powerpc/boot/dts/fsl/t1042rdb.dts
index 738c23790e94..67af56bc5ee9 100644
--- a/arch/powerpc/boot/dts/t1042rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xrdb.dtsi"
 
 / {
@@ -45,4 +45,4 @@ cpld@3,0 {
 	};
 };
 
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t1042rdb_pi.dts
rename to arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
index 634f751fa6d3..2f67677530a4 100644
--- a/arch/powerpc/boot/dts/t1042rdb_pi.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xsi-pre.dtsi"
 /include/ "t104xrdb.dtsi"
 
 / {
@@ -54,4 +54,4 @@ rtc@68 {
 	};
 };
 
-/include/ "fsl/t1042si-post.dtsi"
+/include/ "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t104xd4rdb.dtsi
rename to arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
diff --git a/arch/powerpc/boot/dts/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t104xqds.dtsi
rename to arch/powerpc/boot/dts/fsl/t104xqds.dtsi
diff --git a/arch/powerpc/boot/dts/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t104xrdb.dtsi
rename to arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
diff --git a/arch/powerpc/boot/dts/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t2080qds.dts
rename to arch/powerpc/boot/dts/fsl/t2080qds.dts
index aa1d6d8c169b..9c8e10fe04cb 100644
--- a/arch/powerpc/boot/dts/t2080qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
 /include/ "t208xqds.dtsi"
 
 / {
@@ -54,4 +54,4 @@ port2 {
 	};
 };
 
-/include/ "fsl/t2080si-post.dtsi"
+/include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
similarity index 97%
rename from arch/powerpc/boot/dts/t2080rdb.dts
rename to arch/powerpc/boot/dts/fsl/t2080rdb.dts
index e8891047600c..33205bf08919 100644
--- a/arch/powerpc/boot/dts/t2080rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
 /include/ "t208xrdb.dtsi"
 
 / {
@@ -54,4 +54,4 @@ port2 {
 	};
 };
 
-/include/ "fsl/t2080si-post.dtsi"
+/include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts
similarity index 96%
rename from arch/powerpc/boot/dts/t2081qds.dts
rename to arch/powerpc/boot/dts/fsl/t2081qds.dts
index 8ec80a71e102..b81213596dbf 100644
--- a/arch/powerpc/boot/dts/t2081qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xsi-pre.dtsi"
 /include/ "t208xqds.dtsi"
 
 / {
@@ -43,4 +43,4 @@ / {
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "fsl/t2081si-post.dtsi"
+/include/ "t2081si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t208xqds.dtsi
rename to arch/powerpc/boot/dts/fsl/t208xqds.dtsi
diff --git a/arch/powerpc/boot/dts/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
similarity index 100%
rename from arch/powerpc/boot/dts/t208xrdb.dtsi
rename to arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts
similarity index 99%
rename from arch/powerpc/boot/dts/t4240qds.dts
rename to arch/powerpc/boot/dts/fsl/t4240qds.dts
index 93722da10e16..c067a6533809 100644
--- a/arch/powerpc/boot/dts/t4240qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t4240si-pre.dtsi"
+/include/ "t4240si-pre.dtsi"
 
 / {
 	model = "fsl,T4240QDS";
@@ -307,4 +307,4 @@ port2 {
 	};
 };
 
-/include/ "fsl/t4240si-post.dtsi"
+/include/ "t4240si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
similarity index 98%
rename from arch/powerpc/boot/dts/t4240rdb.dts
rename to arch/powerpc/boot/dts/fsl/t4240rdb.dts
index 993eb4b8a487..6e820a875621 100644
--- a/arch/powerpc/boot/dts/t4240rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "fsl/t4240si-pre.dtsi"
+/include/ "t4240si-pre.dtsi"
 
 / {
 	model = "fsl,T4240RDB";
@@ -210,4 +210,4 @@ port2 {
 	};
 };
 
-/include/ "fsl/t4240si-post.dtsi"
+/include/ "t4240si-post.dtsi"

From 52246445516e99a59f531a8c72bee8f715a5fd1f Mon Sep 17 00:00:00 2001
From: poonam aggrwal <poonam.aggrwal@freescale.com>
Date: Sat, 19 Sep 2015 23:45:42 +0530
Subject: [PATCH 09/38] powerpc/b4860: Renamed the L2 caches

To make provision for more than one L2 caches in the system, change the
name from L2 to L2_1; same as in T4 platforms.
* Also remove the L2 entry from common file
  "arch/powerpc/boot/dts/fsl/b4si-post.dtsi"
  Keep them only in separate files for b4860 and b4420.

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/b4420si-post.dtsi | 4 +++-
 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  | 4 ++--
 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 4 +++-
 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  | 8 ++++----
 arch/powerpc/boot/dts/fsl/b4si-post.dtsi    | 6 ------
 5 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
index 1ea8602e4345..f996cced45e0 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -89,7 +89,9 @@ rcpm: global-utilities@e2000 {
 		compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0";
 	};
 
-	L2: l2-cache-controller@c20000 {
+	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,b4420-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 338af7e39dd9..4257a7739dd1 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -65,14 +65,14 @@ cpu0: PowerPC,e6500@0 {
 			device_type = "cpu";
 			reg = <0 1>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index d1e26a7407d5..be91803addf9 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -258,7 +258,9 @@ rcpm: global-utilities@e2000 {
 		compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
 	};
 
-	L2: l2-cache-controller@c20000 {
+	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,b4860-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 1948f73fd26b..6823caa6c9cc 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -65,28 +65,28 @@ cpu0: PowerPC,e6500@0 {
 			device_type = "cpu";
 			reg = <0 1>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			clocks = <&mux0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 603910ac1db0..d45ff04c2dde 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -465,10 +465,4 @@ qman: qman@318000 {
 	bman: bman@31a000 {
 		interrupts = <16 2 1 29>;
 	};
-
-	L2: l2-cache-controller@c20000 {
-		compatible = "fsl,b4-l2-cache-controller";
-		reg = <0xc20000 0x1000>;
-		next-level-cache = <&cpc>;
-	};
 };

From 01c593d749f4764a87abd8efa397976f2adb8f49 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:05 -0500
Subject: [PATCH 10/38] powerpc/fsl-booke-64: Allow booting from the secondary
 thread

This allows SMP kernels to work as kdump crash kernels.  While crash
kernels don't really need to be SMP, this prevents things from breaking
if a user does it anyway (which is not something you want to only find
out once the main kernel has crashed in the field, especially if
whether it works or not depends on which cpu crashed).

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/smp.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index b8b821697910..c2ded034ef53 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -173,15 +173,22 @@ static inline u32 read_spin_table_addr_l(void *spin_table)
 static void wake_hw_thread(void *info)
 {
 	void fsl_secondary_thread_init(void);
-	unsigned long imsr1, inia1;
+	unsigned long imsr, inia;
 	int nr = *(const int *)info;
 
-	imsr1 = MSR_KERNEL;
-	inia1 = *(unsigned long *)fsl_secondary_thread_init;
+	imsr = MSR_KERNEL;
+	inia = *(unsigned long *)fsl_secondary_thread_init;
 
-	mttmr(TMRN_IMSR1, imsr1);
-	mttmr(TMRN_INIA1, inia1);
-	mtspr(SPRN_TENS, TEN_THREAD(1));
+	if (cpu_thread_in_core(nr) == 0) {
+		/* For when we boot on a secondary thread with kdump */
+		mttmr(TMRN_IMSR0, imsr);
+		mttmr(TMRN_INIA0, inia);
+		mtspr(SPRN_TENS, TEN_THREAD(0));
+	} else {
+		mttmr(TMRN_IMSR1, imsr);
+		mttmr(TMRN_INIA1, inia);
+		mtspr(SPRN_TENS, TEN_THREAD(1));
+	}
 
 	smp_generic_kick_cpu(nr);
 }
@@ -224,6 +231,12 @@ static int smp_85xx_kick_cpu(int nr)
 
 		smp_call_function_single(primary, wake_hw_thread, &nr, 0);
 		return 0;
+	} else if (cpu_thread_in_core(boot_cpuid) != 0 &&
+		   cpu_first_thread_sibling(boot_cpuid) == nr) {
+		if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
+			return -ENOENT;
+
+		smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0);
 	}
 #endif
 

From 9f640bf5321dff6af69016d8fe753efa6b2f3e72 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:06 -0500
Subject: [PATCH 11/38] powerpc/fsl-corenet: Disable coreint if kexec is
 enabled

Problems have been observed in coreint (EPR) mode if interrupts are
left pending (due to the lack of device quiescence with kdump) after
having tried to deliver to a CPU but unable to deliver due to MSR[EE]
-- interrupts no longer get reliably delivered in the new kernel.  I
tried various ways of fixing it up inside the crash kernel itself, and
none worked (including resetting the entire mpic).  Masking all
interrupts and issuing EOIs in the crashing kernel did help a lot of
the time, but the behavior was not consistent.

Thus, stick to standard IACK mode when kdump is a possibility.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/corenet_generic.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 3a8be47c0e3a..46d05c94add6 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -216,10 +216,12 @@ define_machine(corenet_generic) {
 	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
 #endif
 /*
- * Core reset may cause issue if using the proxy mode of MPIC.
+ * Core reset may cause issues if using the proxy mode of MPIC.
  * So, use the mixed mode of MPIC if enabling CPU hotplug.
+ *
+ * Likewise, problems have been seen with kexec when coreint is enabled.
  */
-#ifdef CONFIG_HOTPLUG_CPU
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC)
 	.get_irq		= mpic_get_irq,
 #else
 	.get_irq		= mpic_get_coreint_irq,

From 1112450a18dfcc26dd18000e20bf06bda27f2bad Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:07 -0500
Subject: [PATCH 12/38] powerpc/85xx: Don't use generic timebase sync on 64-bit

85xx currently uses the generic timebase sync mechanism when
CONFIG_KEXEC is enabled, because 32-bit 85xx kexec support does a hard
reset of each core.  64-bit 85xx kexec does not do this, so we neither
need nor want this (nor is the generic timebase sync code built on
ppc64).

FWIW, I don't like the fact that the hard reset is done on 32-bit
kexec, and I especially don't like the timebase sync being triggered
only on the presence of CONFIG_KEXEC rather than actually booting in
that environment, but that's beyond the scope of this patch...

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index c2ded034ef53..a0763be7259e 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -344,7 +344,7 @@ struct smp_ops_t smp_85xx_ops = {
 	.cpu_disable	= generic_cpu_disable,
 	.cpu_die	= generic_cpu_die,
 #endif
-#ifdef CONFIG_KEXEC
+#if defined(CONFIG_KEXEC) && !defined(CONFIG_PPC64)
 	.give_timebase	= smp_generic_give_timebase,
 	.take_timebase	= smp_generic_take_timebase,
 #endif

From 1930bb5ccf77da3bf1483e2cd85a12ec9c0ed0f6 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:08 -0500
Subject: [PATCH 13/38] powerpc/fsl_pci: Don't set up inbound windows in kdump
 crash kernel

Otherwise, because the top end of the crash kernel is treated as the
absolute top of memory rather than the beginning of a reserved region,
in-flight DMA from the previous kernel that targets areas above the
crash kernel can trigger a storm of PCI errors.  We only do this for
kdump, not normal kexec, in case kexec is being used to upgrade to a
kernel that wants a different inbound memory map.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Mingkai Hu <Mingkai.hu@freescale.com>
---
 arch/powerpc/sysdev/fsl_pci.c | 84 +++++++++++++++++++++++++----------
 1 file changed, 61 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index c42609dde8d2..1c65ef92768d 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -179,6 +179,19 @@ static int setup_one_atmu(struct ccsr_pci __iomem *pci,
 	return i;
 }
 
+static bool is_kdump(void)
+{
+	struct device_node *node;
+
+	node = of_find_node_by_type(NULL, "memory");
+	if (!node) {
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	return of_property_read_bool(node, "linux,usable-memory");
+}
+
 /* atmu setup for fsl pci/pcie controller */
 static void setup_pci_atmu(struct pci_controller *hose)
 {
@@ -192,6 +205,16 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	const char *name = hose->dn->full_name;
 	const u64 *reg;
 	int len;
+	bool setup_inbound;
+
+	/*
+	 * If this is kdump, we don't want to trigger a bunch of PCI
+	 * errors by closing the window on in-flight DMA.
+	 *
+	 * We still run most of the function's logic so that things like
+	 * hose->dma_window_size still get set.
+	 */
+	setup_inbound = !is_kdump();
 
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
@@ -204,8 +227,11 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	/* Disable all windows (except powar0 since it's ignored) */
 	for(i = 1; i < 5; i++)
 		out_be32(&pci->pow[i].powar, 0);
-	for (i = start_idx; i < end_idx; i++)
-		out_be32(&pci->piw[i].piwar, 0);
+
+	if (setup_inbound) {
+		for (i = start_idx; i < end_idx; i++)
+			out_be32(&pci->piw[i].piwar, 0);
+	}
 
 	/* Setup outbound MEM window */
 	for(i = 0, j = 1; i < 3; i++) {
@@ -278,6 +304,7 @@ static void setup_pci_atmu(struct pci_controller *hose)
 
 	/* Setup inbound mem window */
 	mem = memblock_end_of_DRAM();
+	pr_info("%s: end of DRAM %llx\n", __func__, mem);
 
 	/*
 	 * The msi-address-64 property, if it exists, indicates the physical
@@ -320,12 +347,14 @@ static void setup_pci_atmu(struct pci_controller *hose)
 
 		piwar |= ((mem_log - 1) & PIWAR_SZ_MASK);
 
-		/* Setup inbound memory window */
-		out_be32(&pci->piw[win_idx].pitar,  0x00000000);
-		out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
-		out_be32(&pci->piw[win_idx].piwar,  piwar);
-		win_idx--;
+		if (setup_inbound) {
+			/* Setup inbound memory window */
+			out_be32(&pci->piw[win_idx].pitar,  0x00000000);
+			out_be32(&pci->piw[win_idx].piwbar, 0x00000000);
+			out_be32(&pci->piw[win_idx].piwar,  piwar);
+		}
 
+		win_idx--;
 		hose->dma_window_base_cur = 0x00000000;
 		hose->dma_window_size = (resource_size_t)sz;
 
@@ -343,13 +372,15 @@ static void setup_pci_atmu(struct pci_controller *hose)
 
 			piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
 
-			/* Setup inbound memory window */
-			out_be32(&pci->piw[win_idx].pitar,  0x00000000);
-			out_be32(&pci->piw[win_idx].piwbear,
-					pci64_dma_offset >> 44);
-			out_be32(&pci->piw[win_idx].piwbar,
-					pci64_dma_offset >> 12);
-			out_be32(&pci->piw[win_idx].piwar,  piwar);
+			if (setup_inbound) {
+				/* Setup inbound memory window */
+				out_be32(&pci->piw[win_idx].pitar,  0x00000000);
+				out_be32(&pci->piw[win_idx].piwbear,
+						pci64_dma_offset >> 44);
+				out_be32(&pci->piw[win_idx].piwbar,
+						pci64_dma_offset >> 12);
+				out_be32(&pci->piw[win_idx].piwar,  piwar);
+			}
 
 			/*
 			 * install our own dma_set_mask handler to fixup dma_ops
@@ -362,12 +393,15 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	} else {
 		u64 paddr = 0;
 
-		/* Setup inbound memory window */
-		out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
-		out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
-		out_be32(&pci->piw[win_idx].piwar,  (piwar | (mem_log - 1)));
-		win_idx--;
+		if (setup_inbound) {
+			/* Setup inbound memory window */
+			out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
+			out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
+			out_be32(&pci->piw[win_idx].piwar,
+				 (piwar | (mem_log - 1)));
+		}
 
+		win_idx--;
 		paddr += 1ull << mem_log;
 		sz -= 1ull << mem_log;
 
@@ -375,11 +409,15 @@ static void setup_pci_atmu(struct pci_controller *hose)
 			mem_log = ilog2(sz);
 			piwar |= (mem_log - 1);
 
-			out_be32(&pci->piw[win_idx].pitar,  paddr >> 12);
-			out_be32(&pci->piw[win_idx].piwbar, paddr >> 12);
-			out_be32(&pci->piw[win_idx].piwar,  piwar);
-			win_idx--;
+			if (setup_inbound) {
+				out_be32(&pci->piw[win_idx].pitar,
+					 paddr >> 12);
+				out_be32(&pci->piw[win_idx].piwbar,
+					 paddr >> 12);
+				out_be32(&pci->piw[win_idx].piwar, piwar);
+			}
 
+			win_idx--;
 			paddr += 1ull << mem_log;
 		}
 

From 948486544713492f00ac8a9572909101ea892cb0 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Sat, 19 Sep 2015 23:29:53 -0500
Subject: [PATCH 14/38] powerpc/fsl: Move fsl_guts.h out of arch/powerpc

Freescale's Layerscape ARM chips use the same structure.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/mpc85xx_mds.c                 | 2 +-
 arch/powerpc/platforms/85xx/mpc85xx_rdb.c                 | 2 +-
 arch/powerpc/platforms/85xx/p1022_ds.c                    | 2 +-
 arch/powerpc/platforms/85xx/p1022_rdk.c                   | 2 +-
 arch/powerpc/platforms/85xx/smp.c                         | 2 +-
 arch/powerpc/platforms/85xx/twr_p102x.c                   | 2 +-
 arch/powerpc/platforms/86xx/mpc8610_hpcd.c                | 2 +-
 drivers/iommu/fsl_pamu.c                                  | 2 +-
 .../include/asm/fsl_guts.h => include/linux/fsl/guts.h    | 8 ++++----
 sound/soc/fsl/mpc8610_hpcd.c                              | 2 +-
 sound/soc/fsl/p1022_ds.c                                  | 2 +-
 sound/soc/fsl/p1022_rdk.c                                 | 2 +-
 12 files changed, 15 insertions(+), 15 deletions(-)
 rename arch/powerpc/include/asm/fsl_guts.h => include/linux/fsl/guts.h (98%)

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a392e94a07fa..f0be439ceaaa 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -34,6 +34,7 @@
 #include <linux/of_device.h>
 #include <linux/phy.h>
 #include <linux/memblock.h>
+#include <linux/fsl/guts.h>
 
 #include <linux/atomic.h>
 #include <asm/time.h>
@@ -51,7 +52,6 @@
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
-#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index e358bed66d01..50dcc00a0f5a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -17,6 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -27,7 +28,6 @@
 #include <asm/mpic.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 6ac986d3f8a3..371df822e88e 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -16,6 +16,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <asm/div64.h>
@@ -25,7 +26,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
-#include <asm/fsl_guts.h>
 #include <asm/fsl_lbc.h>
 #include "smp.h"
 
diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c
index 680232d6ba48..5087becaa8bc 100644
--- a/arch/powerpc/platforms/85xx/p1022_rdk.c
+++ b/arch/powerpc/platforms/85xx/p1022_rdk.c
@@ -12,6 +12,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 #include <asm/div64.h>
@@ -21,7 +22,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
-#include <asm/fsl_guts.h>
 #include "smp.h"
 
 #include "mpc85xx.h"
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index b8b821697910..6ac7786e076a 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -19,6 +19,7 @@
 #include <linux/kexec.h>
 #include <linux/highmem.h>
 #include <linux/cpu.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -26,7 +27,6 @@
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
-#include <asm/fsl_guts.h>
 #include <asm/code-patching.h>
 #include <asm/cputhreads.h>
 
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index 30e002f4648c..892e613519cc 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/fsl/guts.h>
 #include <linux/pci.h>
 #include <linux/of_platform.h>
 
@@ -23,7 +24,6 @@
 #include <asm/mpic.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
-#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 55413a547ea8..437a9c372ae1 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <linux/fsl/guts.h>
 
 #include <asm/time.h>
 #include <asm/machdep.h>
@@ -38,7 +39,6 @@
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/simple_gpio.h>
-#include <asm/fsl_guts.h>
 
 #include "mpc86xx.h"
 
diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index 2570f2a25dc4..a34355fca37a 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -20,11 +20,11 @@
 
 #include "fsl_pamu.h"
 
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/genalloc.h>
 
 #include <asm/mpc85xx.h>
-#include <asm/fsl_guts.h>
 
 /* define indexes for each operation mapping scenario */
 #define OMI_QMAN        0x00
diff --git a/arch/powerpc/include/asm/fsl_guts.h b/include/linux/fsl/guts.h
similarity index 98%
rename from arch/powerpc/include/asm/fsl_guts.h
rename to include/linux/fsl/guts.h
index 43b6bb1a4a9c..84d971ff3fba 100644
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ b/include/linux/fsl/guts.h
@@ -12,9 +12,10 @@
  * option) any later version.
  */
 
-#ifndef __ASM_POWERPC_FSL_GUTS_H__
-#define __ASM_POWERPC_FSL_GUTS_H__
-#ifdef __KERNEL__
+#ifndef __FSL_GUTS_H__
+#define __FSL_GUTS_H__
+
+#include <linux/types.h>
 
 /**
  * Global Utility Registers.
@@ -189,4 +190,3 @@ static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
 #endif
 
 #endif
-#endif
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 9621b9140df6..6f236f170cf5 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -12,11 +12,11 @@
 
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/fsl/guts.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 71c1a7dc3aeb..747aab0602bd 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -11,12 +11,12 @@
  */
 
 #include <linux/module.h>
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"
diff --git a/sound/soc/fsl/p1022_rdk.c b/sound/soc/fsl/p1022_rdk.c
index ee29048424be..1dd49e5f9675 100644
--- a/sound/soc/fsl/p1022_rdk.c
+++ b/sound/soc/fsl/p1022_rdk.c
@@ -18,12 +18,12 @@
  */
 
 #include <linux/module.h>
+#include <linux/fsl/guts.h>
 #include <linux/interrupt.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <sound/soc.h>
-#include <asm/fsl_guts.h>
 
 #include "fsl_dma.h"
 #include "fsl_ssi.h"

From 0dfc86b3173feee96f36e71879aa6dd56a4d7925 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Sat, 19 Sep 2015 23:29:54 -0500
Subject: [PATCH 15/38] clk: qoriq: Move chip-specific knowledge into driver

The device tree should describe the chips (or chip-like subblocks) in
the system, but it generally does not describe individual registers --
it should identify, rather than describe, a programming interface.

This has not been the case with the QorIQ clockgen nodes.  The
knowledge of what each bit setting of CLKCnCSR means is encoded in
three places (binding, pll node, and mux node), and the last also needs
to know which options are valid on a particular chip.  All three of
these locations are considered stable ABI, making it difficult to fix
mistakes (of which I have found several), much less refactor the
abstraction to be able to address problems, limitations, or new chips.

Under the current binding, a pll clock specifier of 2 means that the
PLL is divided by 4 -- and the driver implements this, unless there
happen to be four clock-output-names rather than 3, in which case it
interprets it as PLL divided by 3.  This does not appear in the binding
documentation at all.  That hack is now considered stable ABI.

The current device tree nodes contain errors, such as saying that
T1040 can set a core clock to PLL/4 when only PLL and PLL/2 are options.
The current binding also ignores some restrictions on clock selection,
such as p5020's requirement that if a core uses the "wrong" PLL, that
PLL must be clocked lower than the "correct" PLL and be at most 80% of
the rated CPU frequency.

Possibly because of the lack of the ability to express such nuance in
the binding, some valid options are omitted from the device trees, such
as the ability on p4080 to run cores 0-3 from PLL3 and cores 4-7 from
PLL1 (again, only if they are at most 80% of rated CPU frequency).
This omission, combined with excessive caution in the cpufreq driver
(addressed in a subsequent patch), means that currently on a 1500 MHz
p4080 with typical PLL configuration, cpufreq can lower the frequency
to 1200 MHz on half the CPUs and do nothing on the others.  With this
patchset, all CPUs can be lowered to 1200 MHz on a rev2 p4080, and on a
rev3 p4080 half can be lowered to 750 MHz and the other half to 600
MHz.

The current binding only deals with CPU clocks.  To describe FMan in
the device tree, we need to describe its clock.  Some chips have
additional muxes that work like the CPU muxes, but are not described in
the device tree.  Others require inspecting the Reset Control Word to
determine which PLL is used.  Rather than continue to extend this mess,
replace it.  Have the driver bind to the chip-specific clockgen
compatible, and keep the detailed description of quirky chip variations
in the driver, where it can be easily fixed, refactored, and extended.

Older device trees will continue to work (including a workaround for
old ls1021a device trees that are missing compatible and reg in the
clockgen node, which even the old binding required).  The pll/mux
details in old device trees will be ignored, but "clocks" properties
pointing at the old nodes will still work, and be directed at the
corresponding new clock.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 .../devicetree/bindings/clock/qoriq-clock.txt |   61 +-
 drivers/clk/clk-qoriq.c                       | 1311 +++++++++++++----
 2 files changed, 1115 insertions(+), 257 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index df4a259a6898..16a3ec433119 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -1,6 +1,6 @@
 * Clock Block on Freescale QorIQ Platforms
 
-Freescale qoriq chips take primary clocking input from the external
+Freescale QorIQ chips take primary clocking input from the external
 SYSCLK signal. The SYSCLK input (frequency) is multiplied using
 multiple phase locked loops (PLL) to create a variety of frequencies
 which can then be passed to a variety of internal logic, including
@@ -13,14 +13,16 @@ which the chip complies.
 Chassis Version		Example Chips
 ---------------		-------------
 1.0			p4080, p5020, p5040
-2.0			t4240, b4860, t1040
+2.0			t4240, b4860
 
 1. Clock Block Binding
 
 Required properties:
-- compatible: Should contain a specific clock block compatible string
-	and a single chassis clock compatible string.
-	Clock block strings include, but not limited to, one of the:
+- compatible: Should contain a chip-specific clock block compatible
+	string and (if applicable) may contain a chassis-version clock
+	compatible string.
+
+	Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
 	* "fsl,p2041-clockgen"
 	* "fsl,p3041-clockgen"
 	* "fsl,p4080-clockgen"
@@ -30,15 +32,14 @@ Required properties:
 	* "fsl,b4420-clockgen"
 	* "fsl,b4860-clockgen"
 	* "fsl,ls1021a-clockgen"
-	Chassis clock strings include:
+	Chassis-version clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
 - reg: Describes the address of the device's resources within the
 	address space defined by its parent bus, and resource zero
 	represents the clock register set
-- clock-frequency: Input system clock frequency
 
-Recommended properties:
+Optional properties:
 - ranges: Allows valid translation between child's address space and
 	parent's. Must be present if the device has sub-nodes.
 - #address-cells: Specifies the number of cells used to represent
@@ -47,8 +48,46 @@ Recommended properties:
 - #size-cells: Specifies the number of cells used to represent
 	the size of an address. Must be present if the device has
 	sub-nodes and set to 1 if present
+- clock-frequency: Input system clock frequency (SYSCLK)
+- clocks: If clock-frequency is not specified, sysclk may be provided
+	as an input clock.  Either clock-frequency or clocks must be
+	provided.
 
-2. Clock Provider/Consumer Binding
+2. Clock Provider
+
+The clockgen node should act as a clock provider, though in older device
+trees the children of the clockgen node are the clock providers.
+
+When the clockgen node is a clock provider, #clock-cells = <2>.
+The first cell of the clock specifier is the clock type, and the
+second cell is the clock index for the specified type.
+
+	Type#	Name		Index Cell
+	0	sysclk		must be 0
+	1	cmux		index (n in CLKCnCSR)
+	2	hwaccel		index (n in CLKCGnHWACSR)
+	3	fman		0 for fm1, 1 for fm2
+	4	platform pll	0=pll, 1=pll/2, 2=pll/3, 3=pll/4
+
+3. Example
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#clock-cells = <2>;
+	};
+
+	fman@400000 {
+		...
+		clocks = <&clockgen 3 0>;
+		...
+	};
+}
+4. Legacy Child Nodes
+
+NOTE: These nodes are deprecated.  Kernels should continue to support
+device trees with these nodes, but new device trees should not use them.
 
 Most of the bindings are from the common clock binding[1].
  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -82,7 +121,7 @@ Recommended properties:
 - reg: Should be the offset and length of clock block base address.
 	The length should be 4.
 
-Example for clock block and clock provider:
+Legacy Example:
 / {
 	clockgen: global-utilities@e1000 {
 		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
@@ -142,7 +181,7 @@ Example for clock block and clock provider:
 	};
 };
 
-Example for clock consumer:
+Example for legacy clock consumer:
 
 / {
 	cpu0: PowerPC,e5500@0 {
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index cda90a971e39..06281a362527 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -10,7 +10,9 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
+#include <linux/fsl/guts.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -19,213 +21,934 @@
 #include <linux/of.h>
 #include <linux/slab.h>
 
-struct cmux_clk {
-	struct clk_hw hw;
-	void __iomem *reg;
-	unsigned int clk_per_pll;
-	u32 flags;
+#define PLL_DIV1	0
+#define PLL_DIV2	1
+#define PLL_DIV3	2
+#define PLL_DIV4	3
+
+#define PLATFORM_PLL	0
+#define CGA_PLL1	1
+#define CGA_PLL2	2
+#define CGA_PLL3	3
+#define CGA_PLL4	4	/* only on clockgen-1.0, which lacks CGB */
+#define CGB_PLL1	4
+#define CGB_PLL2	5
+
+struct clockgen_pll_div {
+	struct clk *clk;
+	char name[32];
 };
 
-#define PLL_KILL			BIT(31)
-#define	CLKSEL_SHIFT		27
-#define CLKSEL_ADJUST		BIT(0)
-#define to_cmux_clk(p)		container_of(p, struct cmux_clk, hw)
+struct clockgen_pll {
+	struct clockgen_pll_div div[4];
+};
 
-static int cmux_set_parent(struct clk_hw *hw, u8 idx)
+#define CLKSEL_VALID	1
+#define CLKSEL_80PCT	2	/* Only allowed if PLL <= 80% of max cpu freq */
+
+struct clockgen_sourceinfo {
+	u32 flags;	/* CLKSEL_xxx */
+	int pll;	/* CGx_PLLn */
+	int div;	/* PLL_DIVn */
+};
+
+#define NUM_MUX_PARENTS	16
+
+struct clockgen_muxinfo {
+	struct clockgen_sourceinfo clksel[NUM_MUX_PARENTS];
+};
+
+#define NUM_HWACCEL	5
+#define NUM_CMUX	8
+
+struct clockgen;
+
+/*
+ * cmux freq must be >= platform pll.
+ * If not set, cmux freq must be >= platform pll/2
+ */
+#define CG_CMUX_GE_PLAT		1
+#define CG_PLL_8BIT		2	/* PLLCnGSR[CFG] is 8 bits, not 6 */
+
+struct clockgen_chipinfo {
+	const char *compat, *guts_compat;
+	const struct clockgen_muxinfo *cmux_groups[2];
+	const struct clockgen_muxinfo *hwaccel[NUM_HWACCEL];
+	void (*init_periph)(struct clockgen *cg);
+	int cmux_to_group[NUM_CMUX]; /* -1 terminates if fewer than NUM_CMUX */
+	u32 pll_mask;	/* 1 << n bit set if PLL n is valid */
+	u32 flags;	/* CG_xxx */
+};
+
+struct clockgen {
+	struct device_node *node;
+	void __iomem *regs;
+	struct clockgen_chipinfo info; /* mutable copy */
+	struct clk *sysclk;
+	struct clockgen_pll pll[6];
+	struct clk *cmux[NUM_CMUX];
+	struct clk *hwaccel[NUM_HWACCEL];
+	struct clk *fman[2];
+	struct ccsr_guts __iomem *guts;
+};
+
+static struct clockgen clockgen;
+
+static const struct clockgen_muxinfo p2041_cmux_grp1 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+	}
+};
+
+static const struct clockgen_muxinfo p2041_cmux_grp2 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[4] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+	}
+};
+
+static const struct clockgen_muxinfo p5020_cmux_grp1 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV1 },
+	}
+};
+
+static const struct clockgen_muxinfo p5020_cmux_grp2 = {
+	{
+		[0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo p5040_cmux_grp1 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo p5040_cmux_grp2 = {
+	{
+		[0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo p4080_cmux_grp1 = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		[8] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL3, PLL_DIV1 },
+	}
+};
+
+static const struct clockgen_muxinfo p4080_cmux_grp2 = {
+	{
+		[0] = { CLKSEL_VALID | CLKSEL_80PCT, CGA_PLL1, PLL_DIV1 },
+		[8] = { CLKSEL_VALID, CGA_PLL3, PLL_DIV1 },
+		[9] = { CLKSEL_VALID, CGA_PLL3, PLL_DIV2 },
+		[12] = { CLKSEL_VALID, CGA_PLL4, PLL_DIV1 },
+		[13] = { CLKSEL_VALID, CGA_PLL4, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo t1023_cmux = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+	}
+};
+
+static const struct clockgen_muxinfo t1040_cmux = {
+	{
+		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		[1] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+	}
+};
+
+
+static const struct clockgen_muxinfo clockgen2_cmux_cga = {
+	{
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL3, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL3, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL3, PLL_DIV4 },
+	},
+};
+
+static const struct clockgen_muxinfo clockgen2_cmux_cga12 = {
+	{
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+	},
+};
+
+static const struct clockgen_muxinfo clockgen2_cmux_cgb = {
+	{
+		{ CLKSEL_VALID, CGB_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGB_PLL1, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGB_PLL2, PLL_DIV1 },
+		{ CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGB_PLL2, PLL_DIV4 },
+	},
+};
+
+static const struct clockgen_muxinfo t1023_hwa1 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t1023_hwa2 = {
+	{
+		[6] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+	},
+};
+
+static const struct clockgen_muxinfo t2080_hwa1 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+		{ CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t2080_hwa2 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV4 },
+		{ CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t4240_hwa1 = {
+	{
+		{ CLKSEL_VALID, PLATFORM_PLL, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo t4240_hwa4 = {
+	{
+		[2] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+		[3] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV3 },
+		[4] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV4 },
+		[5] = { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+		[6] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+	},
+};
+
+static const struct clockgen_muxinfo t4240_hwa5 = {
+	{
+		[2] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV2 },
+		[3] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV3 },
+		[4] = { CLKSEL_VALID, CGB_PLL2, PLL_DIV4 },
+		[5] = { CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
+		[6] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV2 },
+		[7] = { CLKSEL_VALID, CGB_PLL1, PLL_DIV3 },
+	},
+};
+
+#define RCWSR7_FM1_CLK_SEL	0x40000000
+#define RCWSR7_FM2_CLK_SEL	0x20000000
+#define RCWSR7_HWA_ASYNC_DIV	0x04000000
+
+static void __init p2041_init_periph(struct clockgen *cg)
 {
-	struct cmux_clk *clk = to_cmux_clk(hw);
+	u32 reg;
+
+	reg = ioread32be(&cg->guts->rcwsr[7]);
+
+	if (reg & RCWSR7_FM1_CLK_SEL)
+		cg->fman[0] = cg->pll[CGA_PLL2].div[PLL_DIV2].clk;
+	else
+		cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p4080_init_periph(struct clockgen *cg)
+{
+	u32 reg;
+
+	reg = ioread32be(&cg->guts->rcwsr[7]);
+
+	if (reg & RCWSR7_FM1_CLK_SEL)
+		cg->fman[0] = cg->pll[CGA_PLL3].div[PLL_DIV2].clk;
+	else
+		cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+
+	if (reg & RCWSR7_FM2_CLK_SEL)
+		cg->fman[1] = cg->pll[CGA_PLL3].div[PLL_DIV2].clk;
+	else
+		cg->fman[1] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p5020_init_periph(struct clockgen *cg)
+{
+	u32 reg;
+	int div = PLL_DIV2;
+
+	reg = ioread32be(&cg->guts->rcwsr[7]);
+	if (reg & RCWSR7_HWA_ASYNC_DIV)
+		div = PLL_DIV4;
+
+	if (reg & RCWSR7_FM1_CLK_SEL)
+		cg->fman[0] = cg->pll[CGA_PLL2].div[div].clk;
+	else
+		cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init p5040_init_periph(struct clockgen *cg)
+{
+	u32 reg;
+	int div = PLL_DIV2;
+
+	reg = ioread32be(&cg->guts->rcwsr[7]);
+	if (reg & RCWSR7_HWA_ASYNC_DIV)
+		div = PLL_DIV4;
+
+	if (reg & RCWSR7_FM1_CLK_SEL)
+		cg->fman[0] = cg->pll[CGA_PLL3].div[div].clk;
+	else
+		cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+
+	if (reg & RCWSR7_FM2_CLK_SEL)
+		cg->fman[1] = cg->pll[CGA_PLL3].div[div].clk;
+	else
+		cg->fman[1] = cg->pll[PLATFORM_PLL].div[PLL_DIV2].clk;
+}
+
+static void __init t1023_init_periph(struct clockgen *cg)
+{
+	cg->fman[0] = cg->hwaccel[1];
+}
+
+static void __init t1040_init_periph(struct clockgen *cg)
+{
+	cg->fman[0] = cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk;
+}
+
+static void __init t2080_init_periph(struct clockgen *cg)
+{
+	cg->fman[0] = cg->hwaccel[0];
+}
+
+static void __init t4240_init_periph(struct clockgen *cg)
+{
+	cg->fman[0] = cg->hwaccel[3];
+	cg->fman[1] = cg->hwaccel[4];
+}
+
+static const struct clockgen_chipinfo chipinfo[] = {
+	{
+		.compat = "fsl,b4420-clockgen",
+		.guts_compat = "fsl,b4860-device-config",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+		},
+		.hwaccel = {
+			&t2080_hwa1
+		},
+		.cmux_to_group = {
+			0, 1, 1, 1, -1
+		},
+		.pll_mask = 0x3f,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,b4860-clockgen",
+		.guts_compat = "fsl,b4860-device-config",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+		},
+		.hwaccel = {
+			&t2080_hwa1
+		},
+		.cmux_to_group = {
+			0, 1, 1, 1, -1
+		},
+		.pll_mask = 0x3f,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,ls1021a-clockgen",
+		.cmux_groups = {
+			&t1023_cmux
+		},
+		.cmux_to_group = {
+			0, -1
+		},
+		.pll_mask = 0x03,
+	},
+	{
+		.compat = "fsl,p2041-clockgen",
+		.guts_compat = "fsl,qoriq-device-config-1.0",
+		.init_periph = p2041_init_periph,
+		.cmux_groups = {
+			&p2041_cmux_grp1, &p2041_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x07,
+	},
+	{
+		.compat = "fsl,p3041-clockgen",
+		.guts_compat = "fsl,qoriq-device-config-1.0",
+		.init_periph = p2041_init_periph,
+		.cmux_groups = {
+			&p2041_cmux_grp1, &p2041_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x07,
+	},
+	{
+		.compat = "fsl,p4080-clockgen",
+		.guts_compat = "fsl,qoriq-device-config-1.0",
+		.init_periph = p4080_init_periph,
+		.cmux_groups = {
+			&p4080_cmux_grp1, &p4080_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 0, 0, 0, 1, 1, 1, 1
+		},
+		.pll_mask = 0x1f,
+	},
+	{
+		.compat = "fsl,p5020-clockgen",
+		.guts_compat = "fsl,qoriq-device-config-1.0",
+		.init_periph = p5020_init_periph,
+		.cmux_groups = {
+			&p2041_cmux_grp1, &p2041_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 1, -1
+		},
+		.pll_mask = 0x07,
+	},
+	{
+		.compat = "fsl,p5040-clockgen",
+		.guts_compat = "fsl,p5040-device-config",
+		.init_periph = p5040_init_periph,
+		.cmux_groups = {
+			&p5040_cmux_grp1, &p5040_cmux_grp2
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x0f,
+	},
+	{
+		.compat = "fsl,t1023-clockgen",
+		.guts_compat = "fsl,t1023-device-config",
+		.init_periph = t1023_init_periph,
+		.cmux_groups = {
+			&t1023_cmux
+		},
+		.hwaccel = {
+			&t1023_hwa1, &t1023_hwa2
+		},
+		.cmux_to_group = {
+			0, 0, -1
+		},
+		.pll_mask = 0x03,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,t1040-clockgen",
+		.guts_compat = "fsl,t1040-device-config",
+		.init_periph = t1040_init_periph,
+		.cmux_groups = {
+			&t1040_cmux
+		},
+		.cmux_to_group = {
+			0, 0, 0, 0, -1
+		},
+		.pll_mask = 0x07,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,t2080-clockgen",
+		.guts_compat = "fsl,t2080-device-config",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&clockgen2_cmux_cga12
+		},
+		.hwaccel = {
+			&t2080_hwa1, &t2080_hwa2
+		},
+		.cmux_to_group = {
+			0, -1
+		},
+		.pll_mask = 0x07,
+		.flags = CG_PLL_8BIT,
+	},
+	{
+		.compat = "fsl,t4240-clockgen",
+		.guts_compat = "fsl,t4240-device-config",
+		.init_periph = t4240_init_periph,
+		.cmux_groups = {
+			&clockgen2_cmux_cga, &clockgen2_cmux_cgb
+		},
+		.hwaccel = {
+			&t4240_hwa1, NULL, NULL, &t4240_hwa4, &t4240_hwa5
+		},
+		.cmux_to_group = {
+			0, 0, 1, -1
+		},
+		.pll_mask = 0x3f,
+		.flags = CG_PLL_8BIT,
+	},
+	{},
+};
+
+struct mux_hwclock {
+	struct clk_hw hw;
+	struct clockgen *cg;
+	const struct clockgen_muxinfo *info;
+	u32 __iomem *reg;
+	u8 parent_to_clksel[NUM_MUX_PARENTS];
+	s8 clksel_to_parent[NUM_MUX_PARENTS];
+	int num_parents;
+};
+
+#define to_mux_hwclock(p)	container_of(p, struct mux_hwclock, hw)
+#define CLKSEL_MASK		0x78000000
+#define	CLKSEL_SHIFT		27
+
+static int mux_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct mux_hwclock *hwc = to_mux_hwclock(hw);
 	u32 clksel;
 
-	clksel = ((idx / clk->clk_per_pll) << 2) + idx % clk->clk_per_pll;
-	if (clk->flags & CLKSEL_ADJUST)
-		clksel += 8;
-	clksel = (clksel & 0xf) << CLKSEL_SHIFT;
-	iowrite32be(clksel, clk->reg);
+	if (idx >= hwc->num_parents)
+		return -EINVAL;
+
+	clksel = hwc->parent_to_clksel[idx];
+	iowrite32be((clksel << CLKSEL_SHIFT) & CLKSEL_MASK, hwc->reg);
 
 	return 0;
 }
 
-static u8 cmux_get_parent(struct clk_hw *hw)
+static u8 mux_get_parent(struct clk_hw *hw)
 {
-	struct cmux_clk *clk = to_cmux_clk(hw);
+	struct mux_hwclock *hwc = to_mux_hwclock(hw);
 	u32 clksel;
+	s8 ret;
 
-	clksel = ioread32be(clk->reg);
-	clksel = (clksel >> CLKSEL_SHIFT) & 0xf;
-	if (clk->flags & CLKSEL_ADJUST)
-		clksel -= 8;
-	clksel = (clksel >> 2) * clk->clk_per_pll + clksel % 4;
+	clksel = (ioread32be(hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
 
-	return clksel;
+	ret = hwc->clksel_to_parent[clksel];
+	if (ret < 0) {
+		pr_err("%s: mux at %p has bad clksel\n", __func__, hwc->reg);
+		return 0;
+	}
+
+	return ret;
 }
 
 static const struct clk_ops cmux_ops = {
-	.get_parent = cmux_get_parent,
-	.set_parent = cmux_set_parent,
+	.get_parent = mux_get_parent,
+	.set_parent = mux_set_parent,
 };
 
+/*
+ * Don't allow setting for now, as the clock options haven't been
+ * sanitized for additional restrictions.
+ */
+static const struct clk_ops hwaccel_ops = {
+	.get_parent = mux_get_parent,
+};
+
+static const struct clockgen_pll_div *get_pll_div(struct clockgen *cg,
+						  struct mux_hwclock *hwc,
+						  int idx)
+{
+	int pll, div;
+
+	if (!(hwc->info->clksel[idx].flags & CLKSEL_VALID))
+		return NULL;
+
+	pll = hwc->info->clksel[idx].pll;
+	div = hwc->info->clksel[idx].div;
+
+	return &cg->pll[pll].div[div];
+}
+
+static struct clk * __init create_mux_common(struct clockgen *cg,
+					     struct mux_hwclock *hwc,
+					     const struct clk_ops *ops,
+					     unsigned long min_rate,
+					     unsigned long pct80_rate,
+					     const char *fmt, int idx)
+{
+	struct clk_init_data init = {};
+	struct clk *clk;
+	const struct clockgen_pll_div *div;
+	const char *parent_names[NUM_MUX_PARENTS];
+	char name[32];
+	int i, j;
+
+	snprintf(name, sizeof(name), fmt, idx);
+
+	for (i = 0, j = 0; i < NUM_MUX_PARENTS; i++) {
+		unsigned long rate;
+
+		hwc->clksel_to_parent[i] = -1;
+
+		div = get_pll_div(cg, hwc, i);
+		if (!div)
+			continue;
+
+		rate = clk_get_rate(div->clk);
+
+		if (hwc->info->clksel[i].flags & CLKSEL_80PCT &&
+		    rate > pct80_rate)
+			continue;
+		if (rate < min_rate)
+			continue;
+
+		parent_names[j] = div->name;
+		hwc->parent_to_clksel[j] = i;
+		hwc->clksel_to_parent[i] = j;
+		j++;
+	}
+
+	init.name = name;
+	init.ops = ops;
+	init.parent_names = parent_names;
+	init.num_parents = hwc->num_parents = j;
+	init.flags = 0;
+	hwc->hw.init = &init;
+	hwc->cg = cg;
+
+	clk = clk_register(NULL, &hwc->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: Couldn't register %s: %ld\n", __func__, name,
+		       PTR_ERR(clk));
+		kfree(hwc);
+		return NULL;
+	}
+
+	return clk;
+}
+
+static struct clk * __init create_one_cmux(struct clockgen *cg, int idx)
+{
+	struct mux_hwclock *hwc;
+	const struct clockgen_pll_div *div;
+	unsigned long plat_rate, min_rate;
+	u64 pct80_rate;
+	u32 clksel;
+
+	hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+	if (!hwc)
+		return NULL;
+
+	hwc->reg = cg->regs + 0x20 * idx;
+	hwc->info = cg->info.cmux_groups[cg->info.cmux_to_group[idx]];
+
+	/*
+	 * Find the rate for the default clksel, and treat it as the
+	 * maximum rated core frequency.  If this is an incorrect
+	 * assumption, certain clock options (possibly including the
+	 * default clksel) may be inappropriately excluded on certain
+	 * chips.
+	 */
+	clksel = (ioread32be(hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
+	div = get_pll_div(cg, hwc, clksel);
+	if (!div)
+		return NULL;
+
+	pct80_rate = clk_get_rate(div->clk);
+	pct80_rate *= 8;
+	do_div(pct80_rate, 10);
+
+	plat_rate = clk_get_rate(cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk);
+
+	if (cg->info.flags & CG_CMUX_GE_PLAT)
+		min_rate = plat_rate;
+	else
+		min_rate = plat_rate / 2;
+
+	return create_mux_common(cg, hwc, &cmux_ops, min_rate,
+				 pct80_rate, "cg-cmux%d", idx);
+}
+
+static struct clk * __init create_one_hwaccel(struct clockgen *cg, int idx)
+{
+	struct mux_hwclock *hwc;
+
+	hwc = kzalloc(sizeof(*hwc), GFP_KERNEL);
+	if (!hwc)
+		return NULL;
+
+	hwc->reg = cg->regs + 0x20 * idx + 0x10;
+	hwc->info = cg->info.hwaccel[idx];
+
+	return create_mux_common(cg, hwc, &hwaccel_ops, 0, 0,
+				 "cg-hwaccel%d", idx);
+}
+
+static void __init create_muxes(struct clockgen *cg)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cg->cmux); i++) {
+		if (cg->info.cmux_to_group[i] < 0)
+			break;
+		if (cg->info.cmux_to_group[i] >=
+		    ARRAY_SIZE(cg->info.cmux_groups)) {
+			WARN_ON_ONCE(1);
+			continue;
+		}
+
+		cg->cmux[i] = create_one_cmux(cg, i);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(cg->hwaccel); i++) {
+		if (!cg->info.hwaccel[i])
+			continue;
+
+		cg->hwaccel[i] = create_one_hwaccel(cg, i);
+	}
+}
+
+static void __init clockgen_init(struct device_node *np);
+
+/* Legacy nodes may get probed before the parent clockgen node */
+static void __init legacy_init_clockgen(struct device_node *np)
+{
+	if (!clockgen.node)
+		clockgen_init(of_get_parent(np));
+}
+
+/* Legacy node */
 static void __init core_mux_init(struct device_node *np)
 {
 	struct clk *clk;
-	struct clk_init_data init;
-	struct cmux_clk *cmux_clk;
-	struct device_node *node;
-	int rc, count, i;
-	u32	offset;
-	const char *clk_name;
-	const char **parent_names;
-	struct of_phandle_args clkspec;
+	struct resource res;
+	int idx, rc;
 
-	rc = of_property_read_u32(np, "reg", &offset);
-	if (rc) {
-		pr_err("%s: could not get reg property\n", np->name);
-		return;
-	}
+	legacy_init_clockgen(np);
 
-	/* get the input clock source count */
-	count = of_property_count_strings(np, "clock-names");
-	if (count < 0) {
-		pr_err("%s: get clock count error\n", np->name);
-		return;
-	}
-	parent_names = kcalloc(count, sizeof(char *), GFP_KERNEL);
-	if (!parent_names)
+	if (of_address_to_resource(np, 0, &res))
 		return;
 
-	for (i = 0; i < count; i++)
-		parent_names[i] = of_clk_get_parent_name(np, i);
-
-	cmux_clk = kzalloc(sizeof(*cmux_clk), GFP_KERNEL);
-	if (!cmux_clk)
-		goto err_name;
-
-	cmux_clk->reg = of_iomap(np, 0);
-	if (!cmux_clk->reg) {
-		pr_err("%s: could not map register\n", __func__);
-		goto err_clk;
-	}
-
-	rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", 0,
-					&clkspec);
-	if (rc) {
-		pr_err("%s: parse clock node error\n", __func__);
-		goto err_clk;
-	}
-
-	cmux_clk->clk_per_pll = of_property_count_strings(clkspec.np,
-			"clock-output-names");
-	of_node_put(clkspec.np);
-
-	node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen");
-	if (node && (offset >= 0x80))
-		cmux_clk->flags = CLKSEL_ADJUST;
-
-	rc = of_property_read_string_index(np, "clock-output-names",
-					   0, &clk_name);
-	if (rc) {
-		pr_err("%s: read clock names error\n", np->name);
-		goto err_clk;
-	}
-
-	init.name = clk_name;
-	init.ops = &cmux_ops;
-	init.parent_names = parent_names;
-	init.num_parents = count;
-	init.flags = 0;
-	cmux_clk->hw.init = &init;
-
-	clk = clk_register(NULL, &cmux_clk->hw);
-	if (IS_ERR(clk)) {
-		pr_err("%s: could not register clock\n", clk_name);
-		goto err_clk;
-	}
+	idx = (res.start & 0xf0) >> 5;
+	clk = clockgen.cmux[idx];
 
 	rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
 	if (rc) {
-		pr_err("Could not register clock provider for node:%s\n",
-		       np->name);
-		goto err_clk;
+		pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+		       __func__, np->name, rc);
+		return;
 	}
-	goto err_name;
-
-err_clk:
-	kfree(cmux_clk);
-err_name:
-	/* free *_names because they are reallocated when registered */
-	kfree(parent_names);
 }
 
-static void __init core_pll_init(struct device_node *np)
+static struct clk *sysclk_from_fixed(struct device_node *node, const char *name)
 {
-	u32 mult;
-	int i, rc, count;
-	const char *clk_name, *parent_name;
-	struct clk_onecell_data *onecell_data;
-	struct clk      **subclks;
-	void __iomem *base;
+	u32 rate;
 
-	base = of_iomap(np, 0);
-	if (!base) {
-		pr_err("iomap error\n");
+	if (of_property_read_u32(node, "clock-frequency", &rate))
+		return ERR_PTR(-ENODEV);
+
+	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static struct clk *sysclk_from_parent(const char *name)
+{
+	struct clk *clk;
+	const char *parent_name;
+
+	clk = of_clk_get(clockgen.node, 0);
+	if (IS_ERR(clk))
+		return clk;
+
+	/* Register the input clock under the desired name. */
+	parent_name = __clk_get_name(clk);
+	clk = clk_register_fixed_factor(NULL, name, parent_name,
+					0, 1, 1);
+	if (IS_ERR(clk))
+		pr_err("%s: Couldn't register %s: %ld\n", __func__, name,
+		       PTR_ERR(clk));
+
+	return clk;
+}
+
+static struct clk * __init create_sysclk(const char *name)
+{
+	struct device_node *sysclk;
+	struct clk *clk;
+
+	clk = sysclk_from_fixed(clockgen.node, name);
+	if (!IS_ERR(clk))
+		return clk;
+
+	clk = sysclk_from_parent(name);
+	if (!IS_ERR(clk))
+		return clk;
+
+	sysclk = of_get_child_by_name(clockgen.node, "sysclk");
+	if (sysclk) {
+		clk = sysclk_from_fixed(sysclk, name);
+		if (!IS_ERR(clk))
+			return clk;
+	}
+
+	pr_err("%s: No input clock\n", __func__);
+	return NULL;
+}
+
+/* Legacy node */
+static void __init sysclk_init(struct device_node *node)
+{
+	struct clk *clk;
+
+	legacy_init_clockgen(node);
+
+	clk = clockgen.sysclk;
+	if (clk)
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+
+#define PLL_KILL BIT(31)
+
+static void __init create_one_pll(struct clockgen *cg, int idx)
+{
+	u32 __iomem *reg;
+	u32 mult;
+	struct clockgen_pll *pll = &cg->pll[idx];
+	int i;
+
+	if (!(cg->info.pll_mask & (1 << idx)))
+		return;
+
+	if (idx == PLATFORM_PLL)
+		reg = cg->regs + 0xc00;
+	else
+		reg = cg->regs + 0x800 + 0x20 * (idx - 1);
+
+	/* Get the multiple of PLL */
+	mult = ioread32be(reg);
+
+	/* Check if this PLL is disabled */
+	if (mult & PLL_KILL) {
+		pr_debug("%s(): pll %p disabled\n", __func__, reg);
 		return;
 	}
 
-	/* get the multiple of PLL */
-	mult = ioread32be(base);
+	if ((cg->info.flags & CG_PLL_8BIT) && idx != PLATFORM_PLL)
+		mult = (mult & GENMASK(8, 1)) >> 1;
+	else
+		mult = (mult & GENMASK(6, 1)) >> 1;
 
-	/* check if this PLL is disabled */
-	if (mult & PLL_KILL) {
-		pr_debug("PLL:%s is disabled\n", np->name);
-		goto err_map;
+	for (i = 0; i < ARRAY_SIZE(pll->div); i++) {
+		struct clk *clk;
+
+		snprintf(pll->div[i].name, sizeof(pll->div[i].name),
+			 "cg-pll%d-div%d", idx, i + 1);
+
+		clk = clk_register_fixed_factor(NULL,
+				pll->div[i].name, "cg-sysclk", 0, mult, i + 1);
+		if (IS_ERR(clk)) {
+			pr_err("%s: %s: register failed %ld\n",
+			       __func__, pll->div[i].name, PTR_ERR(clk));
+			continue;
+		}
+
+		pll->div[i].clk = clk;
 	}
-	mult = (mult >> 1) & 0x3f;
+}
 
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name) {
-		pr_err("PLL: %s must have a parent\n", np->name);
-		goto err_map;
-	}
+static void __init create_plls(struct clockgen *cg)
+{
+	int i;
 
+	for (i = 0; i < ARRAY_SIZE(cg->pll); i++)
+		create_one_pll(cg, i);
+}
+
+static void __init legacy_pll_init(struct device_node *np, int idx)
+{
+	struct clockgen_pll *pll;
+	struct clk_onecell_data *onecell_data;
+	struct clk **subclks;
+	int count, rc;
+
+	legacy_init_clockgen(np);
+
+	pll = &clockgen.pll[idx];
 	count = of_property_count_strings(np, "clock-output-names");
-	if (count < 0 || count > 4) {
-		pr_err("%s: clock is not supported\n", np->name);
-		goto err_map;
-	}
 
-	subclks = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
+	BUILD_BUG_ON(ARRAY_SIZE(pll->div) < 4);
+	subclks = kcalloc(4, sizeof(struct clk *), GFP_KERNEL);
 	if (!subclks)
-		goto err_map;
+		return;
 
 	onecell_data = kmalloc(sizeof(*onecell_data), GFP_KERNEL);
 	if (!onecell_data)
 		goto err_clks;
 
-	for (i = 0; i < count; i++) {
-		rc = of_property_read_string_index(np, "clock-output-names",
-						   i, &clk_name);
-		if (rc) {
-			pr_err("%s: could not get clock names\n", np->name);
-			goto err_cell;
-		}
-
-		/*
-		 * when count == 4, there are 4 output clocks:
-		 * /1, /2, /3, /4 respectively
-		 * when count < 4, there are at least 2 output clocks:
-		 * /1, /2, (/4, if count == 3) respectively.
-		 */
-		if (count == 4)
-			subclks[i] = clk_register_fixed_factor(NULL, clk_name,
-					parent_name, 0, mult, 1 + i);
-		else
-
-			subclks[i] = clk_register_fixed_factor(NULL, clk_name,
-					parent_name, 0, mult, 1 << i);
-
-		if (IS_ERR(subclks[i])) {
-			pr_err("%s: could not register clock\n", clk_name);
-			goto err_cell;
-		}
+	if (count <= 3) {
+		subclks[0] = pll->div[0].clk;
+		subclks[1] = pll->div[1].clk;
+		subclks[2] = pll->div[3].clk;
+	} else {
+		subclks[0] = pll->div[0].clk;
+		subclks[1] = pll->div[1].clk;
+		subclks[2] = pll->div[2].clk;
+		subclks[3] = pll->div[3].clk;
 	}
 
 	onecell_data->clks = subclks;
@@ -233,125 +956,221 @@ static void __init core_pll_init(struct device_node *np)
 
 	rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data);
 	if (rc) {
-		pr_err("Could not register clk provider for node:%s\n",
-		       np->name);
+		pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+		       __func__, np->name, rc);
 		goto err_cell;
 	}
 
-	iounmap(base);
 	return;
 err_cell:
 	kfree(onecell_data);
 err_clks:
 	kfree(subclks);
-err_map:
-	iounmap(base);
-}
-
-static void __init sysclk_init(struct device_node *node)
-{
-	struct clk *clk;
-	const char *clk_name = node->name;
-	struct device_node *np = of_get_parent(node);
-	u32 rate;
-
-	if (!np) {
-		pr_err("could not get parent node\n");
-		return;
-	}
-
-	if (of_property_read_u32(np, "clock-frequency", &rate)) {
-		of_node_put(node);
-		return;
-	}
-
-	of_property_read_string(np, "clock-output-names", &clk_name);
-
-	clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate);
-	if (!IS_ERR(clk))
-		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
 
+/* Legacy node */
 static void __init pltfrm_pll_init(struct device_node *np)
 {
-	void __iomem *base;
-	uint32_t mult;
-	const char *parent_name, *clk_name;
-	int i, _errno;
-	struct clk_onecell_data *cod;
+	legacy_pll_init(np, PLATFORM_PLL);
+}
 
-	base = of_iomap(np, 0);
-	if (!base) {
+/* Legacy node */
+static void __init core_pll_init(struct device_node *np)
+{
+	struct resource res;
+	int idx;
+
+	if (of_address_to_resource(np, 0, &res))
+		return;
+
+	if ((res.start & 0xfff) == 0xc00) {
+		/*
+		 * ls1021a devtree labels the platform PLL
+		 * with the core PLL compatible
+		 */
+		pltfrm_pll_init(np);
+	} else {
+		idx = (res.start & 0xf0) >> 5;
+		legacy_pll_init(np, CGA_PLL1 + idx);
+	}
+}
+
+static struct clk *clockgen_clk_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct clockgen *cg = data;
+	struct clk *clk;
+	struct clockgen_pll *pll;
+	u32 type, idx;
+
+	if (clkspec->args_count < 2) {
+		pr_err("%s: insufficient phandle args\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	type = clkspec->args[0];
+	idx = clkspec->args[1];
+
+	switch (type) {
+	case 0:
+		if (idx != 0)
+			goto bad_args;
+		clk = cg->sysclk;
+		break;
+	case 1:
+		if (idx >= ARRAY_SIZE(cg->cmux))
+			goto bad_args;
+		clk = cg->cmux[idx];
+		break;
+	case 2:
+		if (idx >= ARRAY_SIZE(cg->hwaccel))
+			goto bad_args;
+		clk = cg->hwaccel[idx];
+		break;
+	case 3:
+		if (idx >= ARRAY_SIZE(cg->fman))
+			goto bad_args;
+		clk = cg->fman[idx];
+		break;
+	case 4:
+		pll = &cg->pll[PLATFORM_PLL];
+		if (idx >= ARRAY_SIZE(pll->div))
+			goto bad_args;
+		clk = pll->div[idx].clk;
+		break;
+	default:
+		goto bad_args;
+	}
+
+	if (!clk)
+		return ERR_PTR(-ENOENT);
+	return clk;
+
+bad_args:
+	pr_err("%s: Bad phandle args %u %u\n", __func__, type, idx);
+	return ERR_PTR(-EINVAL);
+}
+
+#ifdef CONFIG_PPC
+#include <asm/mpc85xx.h>
+
+static const u32 a4510_svrs[] __initconst = {
+	(SVR_P2040 << 8) | 0x10,	/* P2040 1.0 */
+	(SVR_P2040 << 8) | 0x11,	/* P2040 1.1 */
+	(SVR_P2041 << 8) | 0x10,	/* P2041 1.0 */
+	(SVR_P2041 << 8) | 0x11,	/* P2041 1.1 */
+	(SVR_P3041 << 8) | 0x10,	/* P3041 1.0 */
+	(SVR_P3041 << 8) | 0x11,	/* P3041 1.1 */
+	(SVR_P4040 << 8) | 0x20,	/* P4040 2.0 */
+	(SVR_P4080 << 8) | 0x20,	/* P4080 2.0 */
+	(SVR_P5010 << 8) | 0x10,	/* P5010 1.0 */
+	(SVR_P5010 << 8) | 0x20,	/* P5010 2.0 */
+	(SVR_P5020 << 8) | 0x10,	/* P5020 1.0 */
+	(SVR_P5021 << 8) | 0x10,	/* P5021 1.0 */
+	(SVR_P5040 << 8) | 0x10,	/* P5040 1.0 */
+};
+
+#define SVR_SECURITY	0x80000	/* The Security (E) bit */
+
+static bool __init has_erratum_a4510(void)
+{
+	u32 svr = mfspr(SPRN_SVR);
+	int i;
+
+	svr &= ~SVR_SECURITY;
+
+	for (i = 0; i < ARRAY_SIZE(a4510_svrs); i++) {
+		if (svr == a4510_svrs[i])
+			return true;
+	}
+
+	return false;
+}
+#else
+static bool __init has_erratum_a4510(void)
+{
+	return false;
+}
+#endif
+
+static void __init clockgen_init(struct device_node *np)
+{
+	int i, ret;
+	bool is_old_ls1021a = false;
+
+	/* May have already been called by a legacy probe */
+	if (clockgen.node)
+		return;
+
+	clockgen.node = np;
+	clockgen.regs = of_iomap(np, 0);
+	if (!clockgen.regs &&
+	    of_device_is_compatible(of_root, "fsl,ls1021a")) {
+		/* Compatibility hack for old, broken device trees */
+		clockgen.regs = ioremap(0x1ee1000, 0x1000);
+		is_old_ls1021a = true;
+	}
+	if (!clockgen.regs) {
 		pr_err("%s(): %s: of_iomap() failed\n", __func__, np->name);
 		return;
 	}
 
-	/* Get the multiple of PLL */
-	mult = ioread32be(base);
-
-	iounmap(base);
-
-	/* Check if this PLL is disabled */
-	if (mult & PLL_KILL) {
-		pr_debug("%s(): %s: Disabled\n", __func__, np->name);
-		return;
-	}
-	mult = (mult & GENMASK(6, 1)) >> 1;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name) {
-		pr_err("%s(): %s: of_clk_get_parent_name() failed\n",
-		       __func__, np->name);
-		return;
+	for (i = 0; i < ARRAY_SIZE(chipinfo); i++) {
+		if (of_device_is_compatible(np, chipinfo[i].compat))
+			break;
+		if (is_old_ls1021a &&
+		    !strcmp(chipinfo[i].compat, "fsl,ls1021a-clockgen"))
+			break;
 	}
 
-	i = of_property_count_strings(np, "clock-output-names");
-	if (i < 0) {
-		pr_err("%s(): %s: of_property_count_strings(clock-output-names) = %d\n",
-		       __func__, np->name, i);
-		return;
+	if (i == ARRAY_SIZE(chipinfo)) {
+		pr_err("%s: unknown clockgen node %s\n", __func__,
+		       np->full_name);
+		goto err;
 	}
+	clockgen.info = chipinfo[i];
 
-	cod = kmalloc(sizeof(*cod) + i * sizeof(struct clk *), GFP_KERNEL);
-	if (!cod)
-		return;
-	cod->clks = (struct clk **)(cod + 1);
-	cod->clk_num = i;
+	if (clockgen.info.guts_compat) {
+		struct device_node *guts;
 
-	for (i = 0; i < cod->clk_num; i++) {
-		_errno = of_property_read_string_index(np, "clock-output-names",
-						       i, &clk_name);
-		if (_errno < 0) {
-			pr_err("%s(): %s: of_property_read_string_index(clock-output-names) = %d\n",
-			       __func__, np->name, _errno);
-			goto return_clk_unregister;
+		guts = of_find_compatible_node(NULL, NULL,
+					       clockgen.info.guts_compat);
+		if (guts) {
+			clockgen.guts = of_iomap(guts, 0);
+			if (!clockgen.guts) {
+				pr_err("%s: Couldn't map %s regs\n", __func__,
+				       guts->full_name);
+			}
 		}
 
-		cod->clks[i] = clk_register_fixed_factor(NULL, clk_name,
-					       parent_name, 0, mult, 1 + i);
-		if (IS_ERR(cod->clks[i])) {
-			pr_err("%s(): %s: clk_register_fixed_factor(%s) = %ld\n",
-			       __func__, np->name,
-			       clk_name, PTR_ERR(cod->clks[i]));
-			goto return_clk_unregister;
-		}
 	}
 
-	_errno = of_clk_add_provider(np, of_clk_src_onecell_get, cod);
-	if (_errno < 0) {
-		pr_err("%s(): %s: of_clk_add_provider() = %d\n",
-		       __func__, np->name, _errno);
-		goto return_clk_unregister;
+	if (has_erratum_a4510())
+		clockgen.info.flags |= CG_CMUX_GE_PLAT;
+
+	clockgen.sysclk = create_sysclk("cg-sysclk");
+	create_plls(&clockgen);
+	create_muxes(&clockgen);
+
+	if (clockgen.info.init_periph)
+		clockgen.info.init_periph(&clockgen);
+
+	ret = of_clk_add_provider(np, clockgen_clk_get, &clockgen);
+	if (ret) {
+		pr_err("%s: Couldn't register clk provider for node %s: %d\n",
+		       __func__, np->name, ret);
 	}
 
 	return;
-
-return_clk_unregister:
-	while (--i >= 0)
-		clk_unregister(cod->clks[i]);
-	kfree(cod);
+err:
+	iounmap(clockgen.regs);
+	clockgen.regs = NULL;
 }
 
+CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
+
+/* Legacy nodes */
 CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);
 CLK_OF_DECLARE(qoriq_sysclk_2, "fsl,qoriq-sysclk-2.0", sysclk_init);
 CLK_OF_DECLARE(qoriq_core_pll_1, "fsl,qoriq-core-pll-1.0", core_pll_init);

From 9e19ca2f627e5a6ee7425c48cc30b7356995b691 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Sat, 19 Sep 2015 23:29:55 -0500
Subject: [PATCH 16/38] clk: qoriq: Add ls2080a support.

LS2080A is the first implementation of the chassis 3 clockgen, which
has a different register layout than previous chips.  It is also little
endian, unlike previous chips.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/Kconfig     |  2 +-
 drivers/clk/clk-qoriq.c | 77 ++++++++++++++++++++++++++++++++++++-----
 2 files changed, 69 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 42f7120ca9ce..9f1970c19690 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -121,7 +121,7 @@ config COMMON_CLK_AXI_CLKGEN
 
 config CLK_QORIQ
 	bool "Clock driver for Freescale QorIQ platforms"
-	depends on (PPC_E500MC || ARM) && OF
+	depends on (PPC_E500MC || ARM || ARM64) && OF
 	---help---
 	  This adds the clock driver support for Freescale QorIQ platforms
 	  using common clock framework.
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 06281a362527..8f9c93b9ce21 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -68,7 +68,10 @@ struct clockgen;
  * If not set, cmux freq must be >= platform pll/2
  */
 #define CG_CMUX_GE_PLAT		1
+
 #define CG_PLL_8BIT		2	/* PLLCnGSR[CFG] is 8 bits, not 6 */
+#define CG_VER3			4	/* version 3 cg: reg layout different */
+#define CG_LITTLE_ENDIAN	8
 
 struct clockgen_chipinfo {
 	const char *compat, *guts_compat;
@@ -94,6 +97,26 @@ struct clockgen {
 
 static struct clockgen clockgen;
 
+static void cg_out(struct clockgen *cg, u32 val, u32 __iomem *reg)
+{
+	if (cg->info.flags & CG_LITTLE_ENDIAN)
+		iowrite32(val, reg);
+	else
+		iowrite32be(val, reg);
+}
+
+static u32 cg_in(struct clockgen *cg, u32 __iomem *reg)
+{
+	u32 val;
+
+	if (cg->info.flags & CG_LITTLE_ENDIAN)
+		val = ioread32(reg);
+	else
+		val = ioread32be(reg);
+
+	return val;
+}
+
 static const struct clockgen_muxinfo p2041_cmux_grp1 = {
 	{
 		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
@@ -428,6 +451,17 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		},
 		.pll_mask = 0x03,
 	},
+	{
+		.compat = "fsl,ls2080a-clockgen",
+		.cmux_groups = {
+			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
+		},
+		.cmux_to_group = {
+			0, 0, 1, 1, -1
+		},
+		.pll_mask = 0x37,
+		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
+	},
 	{
 		.compat = "fsl,p2041-clockgen",
 		.guts_compat = "fsl,qoriq-device-config-1.0",
@@ -575,7 +609,7 @@ static int mux_set_parent(struct clk_hw *hw, u8 idx)
 		return -EINVAL;
 
 	clksel = hwc->parent_to_clksel[idx];
-	iowrite32be((clksel << CLKSEL_SHIFT) & CLKSEL_MASK, hwc->reg);
+	cg_out(hwc->cg, (clksel << CLKSEL_SHIFT) & CLKSEL_MASK, hwc->reg);
 
 	return 0;
 }
@@ -586,7 +620,7 @@ static u8 mux_get_parent(struct clk_hw *hw)
 	u32 clksel;
 	s8 ret;
 
-	clksel = (ioread32be(hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
+	clksel = (cg_in(hwc->cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
 
 	ret = hwc->clksel_to_parent[clksel];
 	if (ret < 0) {
@@ -705,7 +739,7 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx)
 	 * default clksel) may be inappropriately excluded on certain
 	 * chips.
 	 */
-	clksel = (ioread32be(hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
+	clksel = (cg_in(cg, hwc->reg) & CLKSEL_MASK) >> CLKSEL_SHIFT;
 	div = get_pll_div(cg, hwc, clksel);
 	if (!div)
 		return NULL;
@@ -874,13 +908,36 @@ static void __init create_one_pll(struct clockgen *cg, int idx)
 	if (!(cg->info.pll_mask & (1 << idx)))
 		return;
 
-	if (idx == PLATFORM_PLL)
-		reg = cg->regs + 0xc00;
-	else
-		reg = cg->regs + 0x800 + 0x20 * (idx - 1);
+	if (cg->info.flags & CG_VER3) {
+		switch (idx) {
+		case PLATFORM_PLL:
+			reg = cg->regs + 0x60080;
+			break;
+		case CGA_PLL1:
+			reg = cg->regs + 0x80;
+			break;
+		case CGA_PLL2:
+			reg = cg->regs + 0xa0;
+			break;
+		case CGB_PLL1:
+			reg = cg->regs + 0x10080;
+			break;
+		case CGB_PLL2:
+			reg = cg->regs + 0x100a0;
+			break;
+		default:
+			WARN_ONCE(1, "index %d\n", idx);
+			return;
+		}
+	} else {
+		if (idx == PLATFORM_PLL)
+			reg = cg->regs + 0xc00;
+		else
+			reg = cg->regs + 0x800 + 0x20 * (idx - 1);
+	}
 
 	/* Get the multiple of PLL */
-	mult = ioread32be(reg);
+	mult = cg_in(cg, reg);
 
 	/* Check if this PLL is disabled */
 	if (mult & PLL_KILL) {
@@ -888,7 +945,8 @@ static void __init create_one_pll(struct clockgen *cg, int idx)
 		return;
 	}
 
-	if ((cg->info.flags & CG_PLL_8BIT) && idx != PLATFORM_PLL)
+	if ((cg->info.flags & CG_VER3) ||
+	    ((cg->info.flags & CG_PLL_8BIT) && idx != PLATFORM_PLL))
 		mult = (mult & GENMASK(8, 1)) >> 1;
 	else
 		mult = (mult & GENMASK(6, 1)) >> 1;
@@ -1169,6 +1227,7 @@ static void __init clockgen_init(struct device_node *np)
 CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
 
 /* Legacy nodes */
 CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);

From d9e1831a420267a7ced708bb259d65b0a3c0344d Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:09 -0500
Subject: [PATCH 17/38] powerpc/85xx: Load all early TLB entries at once

Use an AS=1 trampoline TLB entry to allow all normal TLB1 entries to
be loaded at once.  This avoids the need to keep the translation that
code is executing from in the same TLB entry in the final TLB
configuration as during early boot, which in turn is helpful for
relocatable kernels (e.g. kdump) where the kernel is not running from
what would be the first TLB entry.

On e6500, we limit map_mem_in_cams() to the primary hwthread of a
core (the boot cpu is always considered primary, as a kdump kernel
can be entered on any cpu).  Each TLB only needs to be set up once,
and when we do, we don't want another thread to be running when we
create a temporary trampoline TLB1 entry.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/setup_64.c   |  8 ++++
 arch/powerpc/mm/fsl_booke_mmu.c  |  4 +-
 arch/powerpc/mm/mmu_decl.h       |  1 +
 arch/powerpc/mm/tlb_nohash.c     | 19 +++++++++-
 arch/powerpc/mm/tlb_nohash_low.S | 63 ++++++++++++++++++++++++++++++++
 5 files changed, 92 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index bdcbb716f4d6..505ec2c698e0 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -108,6 +108,14 @@ static void setup_tlb_core_data(void)
 	for_each_possible_cpu(cpu) {
 		int first = cpu_first_thread_sibling(cpu);
 
+		/*
+		 * If we boot via kdump on a non-primary thread,
+		 * make sure we point at the thread that actually
+		 * set up this TLB.
+		 */
+		if (cpu_first_thread_sibling(boot_cpuid) == first)
+			first = boot_cpuid;
+
 		paca[cpu].tcd_ptr = &paca[first].tcd;
 
 		/*
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 354ba3c09ef3..bb1f88c10377 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -141,8 +141,6 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 	tlbcam_addrs[index].start = virt;
 	tlbcam_addrs[index].limit = virt + size - 1;
 	tlbcam_addrs[index].phys = phys;
-
-	loadcam_entry(index);
 }
 
 unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
@@ -188,6 +186,8 @@ static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
 		virt += cam_sz;
 		phys += cam_sz;
 	}
+
+	loadcam_multi(0, i, max_cam_idx);
 	tlbcam_index = i;
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 085b66b10891..27c3a2d3a4f1 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -152,6 +152,7 @@ extern int switch_to_as1(void);
 extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
 #endif
 extern void loadcam_entry(unsigned int index);
+extern void loadcam_multi(int first_idx, int num, int tmp_idx);
 
 struct tlbcam {
 	u32	MAS0;
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 723a099f6be3..a7381fbdd6ab 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -42,6 +42,7 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 #include <asm/code-patching.h>
+#include <asm/cputhreads.h>
 #include <asm/hugetlb.h>
 #include <asm/paca.h>
 
@@ -628,10 +629,26 @@ static void early_init_this_mmu(void)
 #ifdef CONFIG_PPC_FSL_BOOK3E
 	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
 		unsigned int num_cams;
+		int __maybe_unused cpu = smp_processor_id();
+		bool map = true;
 
 		/* use a quarter of the TLBCAM for bolted linear map */
 		num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
-		linear_map_top = map_mem_in_cams(linear_map_top, num_cams);
+
+		/*
+		 * Only do the mapping once per core, or else the
+		 * transient mapping would cause problems.
+		 */
+#ifdef CONFIG_SMP
+		if (cpu != boot_cpuid &&
+		    (cpu != cpu_first_thread_sibling(cpu) ||
+		     cpu == cpu_first_thread_sibling(boot_cpuid)))
+			map = false;
+#endif
+
+		if (map)
+			linear_map_top = map_mem_in_cams(linear_map_top,
+							 num_cams);
 	}
 #endif
 
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 43ff3c797fbf..68c477592e43 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -400,6 +400,7 @@ _GLOBAL(set_context)
  * extern void loadcam_entry(unsigned int index)
  *
  * Load TLBCAM[index] entry in to the L2 CAM MMU
+ * Must preserve r7, r8, r9, and r10
  */
 _GLOBAL(loadcam_entry)
 	mflr	r5
@@ -423,4 +424,66 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
 	tlbwe
 	isync
 	blr
+
+/*
+ * Load multiple TLB entries at once, using an alternate-space
+ * trampoline so that we don't have to care about whether the same
+ * TLB entry maps us before and after.
+ *
+ * r3 = first entry to write
+ * r4 = number of entries to write
+ * r5 = temporary tlb entry
+ */
+_GLOBAL(loadcam_multi)
+	mflr	r8
+
+	/*
+	 * Set up temporary TLB entry that is the same as what we're
+	 * running from, but in AS=1.
+	 */
+	bl	1f
+1:	mflr	r6
+	tlbsx	0,r8
+	mfspr	r6,SPRN_MAS1
+	ori	r6,r6,MAS1_TS
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS0
+	rlwimi	r6,r5,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK
+	mr	r7,r5
+	mtspr	SPRN_MAS0,r6
+	isync
+	tlbwe
+	isync
+
+	/* Switch to AS=1 */
+	mfmsr	r6
+	ori	r6,r6,MSR_IS|MSR_DS
+	mtmsr	r6
+	isync
+
+	mr	r9,r3
+	add	r10,r3,r4
+2:	bl	loadcam_entry
+	addi	r9,r9,1
+	cmpw	r9,r10
+	mr	r3,r9
+	blt	2b
+
+	/* Return to AS=0 and clear the temporary entry */
+	mfmsr	r6
+	rlwinm.	r6,r6,0,~(MSR_IS|MSR_DS)
+	mtmsr	r6
+	isync
+
+	li	r6,0
+	mtspr	SPRN_MAS1,r6
+	rlwinm	r6,r7,MAS0_ESEL_SHIFT,MAS0_ESEL_MASK
+	oris	r6,r6,MAS0_TLBSEL(1)@h
+	mtspr	SPRN_MAS0,r6
+	isync
+	tlbwe
+	isync
+
+	mtlr	r8
+	blr
 #endif

From 2c7693e081ab86e70931b2d05dbdbbdfab5086a3 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Thu, 22 Oct 2015 23:21:46 -0500
Subject: [PATCH 18/38] clk: qoriq: Fix wrong data in p2041_cmux_grp2

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 drivers/clk/clk-qoriq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 8f9c93b9ce21..07985a57ae72 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -128,8 +128,8 @@ static const struct clockgen_muxinfo p2041_cmux_grp1 = {
 static const struct clockgen_muxinfo p2041_cmux_grp2 = {
 	{
 		[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
-		[4] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
-		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[4] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		[5] = { CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
 	}
 };
 

From e994412c5f19402a834f4b0d95e9159d1c7b0fb8 Mon Sep 17 00:00:00 2001
From: Hou Zhiqiang <B48286@freescale.com>
Date: Fri, 23 Oct 2015 16:01:21 +0800
Subject: [PATCH 19/38] clk: qoriq: Add ls1043a support.

Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 drivers/clk/clk-qoriq.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 07985a57ae72..1ab0fb81c6a0 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -244,6 +244,28 @@ static const struct clockgen_muxinfo clockgen2_cmux_cgb = {
 	},
 };
 
+static const struct clockgen_muxinfo ls1043a_hwa1 = {
+	{
+		{},
+		{},
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV3 },
+		{},
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
+static const struct clockgen_muxinfo ls1043a_hwa2 = {
+	{
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV1 },
+		{},
+		{ CLKSEL_VALID, CGA_PLL2, PLL_DIV3 },
+	},
+};
+
 static const struct clockgen_muxinfo t1023_hwa1 = {
 	{
 		{},
@@ -451,6 +473,21 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		},
 		.pll_mask = 0x03,
 	},
+	{
+		.compat = "fsl,ls1043a-clockgen",
+		.init_periph = t2080_init_periph,
+		.cmux_groups = {
+			&t1040_cmux
+		},
+		.hwaccel = {
+			&ls1043a_hwa1, &ls1043a_hwa2
+		},
+		.cmux_to_group = {
+			0, -1
+		},
+		.pll_mask = 0x07,
+		.flags = CG_PLL_8BIT,
+	},
 	{
 		.compat = "fsl,ls2080a-clockgen",
 		.cmux_groups = {
@@ -1227,6 +1264,7 @@ static void __init clockgen_init(struct device_node *np)
 CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
 
 /* Legacy nodes */

From eba5de8dc163fac4d20f0afed8183431491b570f Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:10 -0500
Subject: [PATCH 20/38] powerpc/fsl-booke-64: Don't limit ppc64_rma_size to one
 TLB entry

This is required for kdump to work when loaded at at an address that
does not fall within the first TLB entry -- which can easily happen
because while the lower limit is enforced via reserved memory, which
doesn't affect how much is mapped, the upper limit is enforced via a
different mechanism that does.  Thus, more TLB entries are needed than
would normally be used, as the total memory to be mapped might not be a
power of two.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/mm/fsl_booke_mmu.c | 22 +++++++++++++++-------
 arch/powerpc/mm/mmu_decl.h      |  3 ++-
 arch/powerpc/mm/tlb_nohash.c    | 24 +++++++++++++++++-------
 3 files changed, 34 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index bb1f88c10377..f3afe3d97f6b 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -169,7 +169,8 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 }
 
 static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
-					unsigned long ram, int max_cam_idx)
+					unsigned long ram, int max_cam_idx,
+					bool dryrun)
 {
 	int i;
 	unsigned long amount_mapped = 0;
@@ -179,7 +180,9 @@ static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
 		unsigned long cam_sz;
 
 		cam_sz = calc_cam_sz(ram, virt, phys);
-		settlbcam(i, virt, phys, cam_sz, pgprot_val(PAGE_KERNEL_X), 0);
+		if (!dryrun)
+			settlbcam(i, virt, phys, cam_sz,
+				  pgprot_val(PAGE_KERNEL_X), 0);
 
 		ram -= cam_sz;
 		amount_mapped += cam_sz;
@@ -187,6 +190,9 @@ static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
 		phys += cam_sz;
 	}
 
+	if (dryrun)
+		return amount_mapped;
+
 	loadcam_multi(0, i, max_cam_idx);
 	tlbcam_index = i;
 
@@ -199,12 +205,12 @@ static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
 	return amount_mapped;
 }
 
-unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun)
 {
 	unsigned long virt = PAGE_OFFSET;
 	phys_addr_t phys = memstart_addr;
 
-	return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx);
+	return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx, dryrun);
 }
 
 #ifdef CONFIG_PPC32
@@ -235,7 +241,7 @@ void __init adjust_total_lowmem(void)
 	ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
 
 	i = switch_to_as1();
-	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
+	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, false);
 	restore_to_as0(i, 0, 0, 1);
 
 	pr_info("Memory CAM mapping: ");
@@ -303,10 +309,12 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
 		n = switch_to_as1();
 		/* map a 64M area for the second relocation */
 		if (memstart_addr > start)
-			map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM);
+			map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM,
+					false);
 		else
 			map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
-					0x4000000, CONFIG_LOWMEM_CAM_NUM);
+					0x4000000, CONFIG_LOWMEM_CAM_NUM,
+					false);
 		restore_to_as0(n, offset, __va(dt_ptr), 1);
 		/* We should never reach here */
 		panic("Relocation error");
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 27c3a2d3a4f1..9f58ff44a075 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -141,7 +141,8 @@ extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(unsigned long top);
 
 #elif defined(CONFIG_PPC_FSL_BOOK3E)
-extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx);
+extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx,
+				     bool dryrun);
 extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 				 phys_addr_t phys);
 #ifdef CONFIG_PPC32
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index a7381fbdd6ab..bb04e4df3100 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -648,7 +648,7 @@ static void early_init_this_mmu(void)
 
 		if (map)
 			linear_map_top = map_mem_in_cams(linear_map_top,
-							 num_cams);
+							 num_cams, false);
 	}
 #endif
 
@@ -746,10 +746,14 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	 * entries are supported though that may eventually
 	 * change.
 	 *
-	 * on FSL Embedded 64-bit, we adjust the RMA size to match the
-	 * first bolted TLB entry size.  We still limit max to 1G even if
-	 * the TLB could cover more.  This is due to what the early init
-	 * code is setup to do.
+	 * on FSL Embedded 64-bit, usually all RAM is bolted, but with
+	 * unusual memory sizes it's possible for some RAM to not be mapped
+	 * (such RAM is not used at all by Linux, since we don't support
+	 * highmem on 64-bit).  We limit ppc64_rma_size to what would be
+	 * mappable if this memblock is the only one.  Additional memblocks
+	 * can only increase, not decrease, the amount that ends up getting
+	 * mapped.  We still limit max to 1G even if we'll eventually map
+	 * more.  This is due to what the early init code is set up to do.
 	 *
 	 * We crop it to the size of the first MEMBLOCK to
 	 * avoid going over total available memory just in case...
@@ -757,8 +761,14 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 #ifdef CONFIG_PPC_FSL_BOOK3E
 	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
 		unsigned long linear_sz;
-		linear_sz = calc_cam_sz(first_memblock_size, PAGE_OFFSET,
-					first_memblock_base);
+		unsigned int num_cams;
+
+		/* use a quarter of the TLBCAM for bolted linear map */
+		num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
+
+		linear_sz = map_mem_in_cams(first_memblock_size, num_cams,
+					    true);
+
 		ppc64_rma_size = min_t(u64, linear_sz, 0x40000000);
 	} else
 #endif

From 939fbf00805b395743e2406755ca20f5f959a598 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Tue, 6 Oct 2015 22:48:11 -0500
Subject: [PATCH 21/38] powerpc/85xx: Implement 64-bit kexec support

Unlike 32-bit 85xx kexec, we don't do a core reset.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: edit changelog, and cleanup]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/smp.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index a0763be7259e..2e4668435307 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -351,6 +351,7 @@ struct smp_ops_t smp_85xx_ops = {
 };
 
 #ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC32
 atomic_t kexec_down_cpus = ATOMIC_INIT(0);
 
 void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
@@ -370,9 +371,18 @@ static void mpc85xx_smp_kexec_down(void *arg)
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0,1);
 }
+#else
+void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+	local_irq_disable();
+	hard_irq_disable();
+	mpic_teardown_this_cpu(secondary);
+}
+#endif
 
 static void mpc85xx_smp_machine_kexec(struct kimage *image)
 {
+#ifdef CONFIG_PPC32
 	int timeout = INT_MAX;
 	int i, num_cpus = num_present_cpus();
 
@@ -393,6 +403,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 		if ( i == smp_processor_id() ) continue;
 		mpic_reset_core(i);
 	}
+#endif
 
 	default_machine_kexec(image);
 }

From f34b3e19fd060b87e97c89050f2b40b8ada468a9 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:12 -0500
Subject: [PATCH 22/38] powerpc/e6500: kexec: Handle hardware threads

The new kernel will be expecting secondary threads to be disabled,
not spinning.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_64.S     | 16 +++++++++++
 arch/powerpc/platforms/85xx/smp.c | 46 +++++++++++++++++++++++++++++++
 2 files changed, 62 insertions(+)

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index d48125d0c048..8b2bf0d3b7d1 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -182,6 +182,8 @@ exception_marker:
 
 #ifdef CONFIG_PPC_BOOK3E
 _GLOBAL(fsl_secondary_thread_init)
+	mfspr	r4,SPRN_BUCSR
+
 	/* Enable branch prediction */
 	lis     r3,BUCSR_INIT@h
 	ori     r3,r3,BUCSR_INIT@l
@@ -196,10 +198,24 @@ _GLOBAL(fsl_secondary_thread_init)
 	 * number.  There are two threads per core, so shift everything
 	 * but the low bit right by two bits so that the cpu numbering is
 	 * continuous.
+	 *
+	 * If the old value of BUCSR is non-zero, this thread has run
+	 * before.  Thus, we assume we are coming from kexec or a similar
+	 * scenario, and PIR is already set to the correct value.  This
+	 * is a bit of a hack, but there are limited opportunities for
+	 * getting information into the thread and the alternatives
+	 * seemed like they'd be overkill.  We can't tell just by looking
+	 * at the old PIR value which state it's in, since the same value
+	 * could be valid for one thread out of reset and for a different
+	 * thread in Linux.
 	 */
+
 	mfspr	r3, SPRN_PIR
+	cmpwi	r4,0
+	bne	1f
 	rlwimi	r3, r3, 30, 2, 30
 	mtspr	SPRN_PIR, r3
+1:
 #endif
 
 _GLOBAL(generic_secondary_thread_init)
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 2e4668435307..712764f3dcbc 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -374,9 +374,55 @@ static void mpc85xx_smp_kexec_down(void *arg)
 #else
 void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
 {
+	int cpu = smp_processor_id();
+	int sibling = cpu_last_thread_sibling(cpu);
+	bool notified = false;
+	int disable_cpu;
+	int disable_threadbit = 0;
+	long start = mftb();
+	long now;
+
 	local_irq_disable();
 	hard_irq_disable();
 	mpic_teardown_this_cpu(secondary);
+
+	if (cpu == crashing_cpu && cpu_thread_in_core(cpu) != 0) {
+		/*
+		 * We enter the crash kernel on whatever cpu crashed,
+		 * even if it's a secondary thread.  If that's the case,
+		 * disable the corresponding primary thread.
+		 */
+		disable_threadbit = 1;
+		disable_cpu = cpu_first_thread_sibling(cpu);
+	} else if (sibling != crashing_cpu &&
+		   cpu_thread_in_core(cpu) == 0 &&
+		   cpu_thread_in_core(sibling) != 0) {
+		disable_threadbit = 2;
+		disable_cpu = sibling;
+	}
+
+	if (disable_threadbit) {
+		while (paca[disable_cpu].kexec_state < KEXEC_STATE_REAL_MODE) {
+			barrier();
+			now = mftb();
+			if (!notified && now - start > 1000000) {
+				pr_info("%s/%d: waiting for cpu %d to enter KEXEC_STATE_REAL_MODE (%d)\n",
+					__func__, smp_processor_id(),
+					disable_cpu,
+					paca[disable_cpu].kexec_state);
+				notified = true;
+			}
+		}
+
+		if (notified) {
+			pr_info("%s: cpu %d done waiting\n",
+				__func__, disable_cpu);
+		}
+
+		mtspr(SPRN_TENC, disable_threadbit);
+		while (mfspr(SPRN_TENSR) & disable_threadbit)
+			cpu_relax();
+	}
 }
 #endif
 

From 68d1014019b41c5069b749583a70ede60150b8c2 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Tue, 6 Oct 2015 22:48:13 -0500
Subject: [PATCH 23/38] powerpc/book3e-64: rename interrupt_end_book3e with
 __end_interrupts

Rename 'interrupt_end_book3e' to '__end_interrupts' so that the symbol
can be used by both book3s and book3e.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: edit changelog]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/exceptions-64e.S | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index f3bd5e747ed8..9d4a006d6b65 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -542,8 +542,8 @@ interrupt_base_book3e:					/* fake trap */
 	EXCEPTION_STUB(0x320, ehpriv)
 	EXCEPTION_STUB(0x340, lrat_error)
 
-	.globl interrupt_end_book3e
-interrupt_end_book3e:
+	.globl __end_interrupts
+__end_interrupts:
 
 /* Critical Input Interrupt */
 	START_EXCEPTION(critical_input);
@@ -736,7 +736,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	beq+	1f
 
 	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
-	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+	LOAD_REG_IMMEDIATE(r15,__end_interrupts)
 	cmpld	cr0,r10,r14
 	cmpld	cr1,r10,r15
 	blt+	cr0,1f
@@ -800,7 +800,7 @@ kernel_dbg_exc:
 	beq+	1f
 
 	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
-	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+	LOAD_REG_IMMEDIATE(r15,__end_interrupts)
 	cmpld	cr0,r10,r14
 	cmpld	cr1,r10,r15
 	blt+	cr0,1f

From 835c031c98ee1d166c7fdcdbd8c9cc20e05286d4 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Tue, 6 Oct 2015 22:48:14 -0500
Subject: [PATCH 24/38] powerpc/booke64: Fix args to copy_and_flush

Convert r4/r5, not r6, to a virtual address when calling
copy_and_flush.  Otherwise, r3 is already virtual, and copy_to_flush
tries to access r3+r6, PAGE_OFFSET gets added twice.

This isn't normally seen because on book3e we normally enter with
the kernel at zero and thus skip copy_to_flush -- but it will be
needed for kexec support.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: split patch and rewrote changelog]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/head_64.S | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 8b2bf0d3b7d1..a1e85ca9864d 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -474,15 +474,15 @@ __after_prom_start:
  */
 	li	r3,0			/* target addr */
 #ifdef CONFIG_PPC_BOOK3E
-	tovirt(r3,r3)			/* on booke, we already run at PAGE_OFFSET */
+	tovirt(r3,r3)		/* on booke, we already run at PAGE_OFFSET */
 #endif
 	mr.	r4,r26			/* In some cases the loader may  */
+#if defined(CONFIG_PPC_BOOK3E)
+	tovirt(r4,r4)
+#endif
 	beq	9f			/* have already put us at zero */
 	li	r6,0x100		/* Start offset, the first 0x100 */
 					/* bytes were copied earlier.	 */
-#ifdef CONFIG_PPC_BOOK3E
-	tovirt(r6,r6)			/* on booke, we already run at PAGE_OFFSET */
-#endif
 
 #ifdef CONFIG_RELOCATABLE
 /*
@@ -514,6 +514,9 @@ __after_prom_start:
 p_end:	.llong	_end - _stext
 
 4:	/* Now copy the rest of the kernel up to _end */
+#if defined(CONFIG_PPC_BOOK3E)
+	tovirt(r26,r26)
+#endif
 	addis	r5,r26,(p_end - _stext)@ha
 	ld	r5,(p_end - _stext)@l(r5)	/* get _end */
 5:	bl	copy_and_flush		/* copy the rest */

From 1cb6e064924857e600d13b4f6be5511145ecb560 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Tue, 6 Oct 2015 22:48:15 -0500
Subject: [PATCH 25/38] powerpc/book3e: support CONFIG_RELOCATABLE

book3e is different with book3s since 3s includes the exception
vectors code in head_64.S as it relies on absolute addressing
which is only possible within this compilation unit. So we have
to get that label address with got.

And when boot a relocated kernel, we should reset ipvr properly again
after .relocate.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: cleanup and ifdef removal]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/exception-64e.h |  4 ++--
 arch/powerpc/kernel/exceptions-64e.S     |  9 +++++++--
 arch/powerpc/kernel/head_64.S            | 22 +++++++++++++++++++---
 3 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index a8b52b61043f..344fc43a7076 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -204,8 +204,8 @@ exc_##label##_book3e:
 #endif
 
 #define SET_IVOR(vector_number, vector_offset)	\
-	li	r3,vector_offset@l; 		\
-	ori	r3,r3,interrupt_base_book3e@l;	\
+	LOAD_REG_ADDR(r3,interrupt_base_book3e);\
+	ori	r3,r3,vector_offset@l;		\
 	mtspr	SPRN_IVOR##vector_number,r3;
 
 #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 9d4a006d6b65..488e6314f993 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1351,7 +1351,10 @@ skpinv:	addi	r6,r6,1				/* Increment */
  * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
  */
 	/* Now we branch the new virtual address mapped by this entry */
-	LOAD_REG_IMMEDIATE(r6,2f)
+	bl	1f		/* Find our address */
+1:	mflr	r6
+	addi	r6,r6,(2f - 1b)
+	tovirt(r6,r6)
 	lis	r7,MSR_KERNEL@h
 	ori	r7,r7,MSR_KERNEL@l
 	mtspr	SPRN_SRR0,r6
@@ -1583,9 +1586,11 @@ _GLOBAL(book3e_secondary_thread_init)
 	mflr	r28
 	b	3b
 
+	.globl init_core_book3e
 init_core_book3e:
 	/* Establish the interrupt vector base */
-	LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+	tovirt(r2,r2)
+	LOAD_REG_ADDR(r3, interrupt_base_book3e)
 	mtspr	SPRN_IVPR,r3
 	sync
 	blr
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index a1e85ca9864d..1b779560728f 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -457,12 +457,22 @@ __after_prom_start:
 	/* process relocations for the final address of the kernel */
 	lis	r25,PAGE_OFFSET@highest	/* compute virtual base of kernel */
 	sldi	r25,r25,32
+#if defined(CONFIG_PPC_BOOK3E)
+	tovirt(r26,r26)		/* on booke, we already run at PAGE_OFFSET */
+#endif
 	lwz	r7,__run_at_load-_stext(r26)
+#if defined(CONFIG_PPC_BOOK3E)
+	tophys(r26,r26)
+#endif
 	cmplwi	cr0,r7,1	/* flagged to stay where we are ? */
 	bne	1f
 	add	r25,r25,r26
 1:	mr	r3,r25
 	bl	relocate
+#if defined(CONFIG_PPC_BOOK3E)
+	/* IVPR needs to be set after relocation. */
+	bl	init_core_book3e
+#endif
 #endif
 
 /*
@@ -490,12 +500,21 @@ __after_prom_start:
  * variable __run_at_load, if it is set the kernel is treated as relocatable
  * kernel, otherwise it will be moved to PHYSICAL_START
  */
+#if defined(CONFIG_PPC_BOOK3E)
+	tovirt(r26,r26)		/* on booke, we already run at PAGE_OFFSET */
+#endif
 	lwz	r7,__run_at_load-_stext(r26)
 	cmplwi	cr0,r7,1
 	bne	3f
 
+#ifdef CONFIG_PPC_BOOK3E
+	LOAD_REG_ADDR(r5, __end_interrupts)
+	LOAD_REG_ADDR(r11, _stext)
+	sub	r5,r5,r11
+#else
 	/* just copy interrupts */
 	LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
+#endif
 	b	5f
 3:
 #endif
@@ -514,9 +533,6 @@ __after_prom_start:
 p_end:	.llong	_end - _stext
 
 4:	/* Now copy the rest of the kernel up to _end */
-#if defined(CONFIG_PPC_BOOK3E)
-	tovirt(r26,r26)
-#endif
 	addis	r5,r26,(p_end - _stext)@ha
 	ld	r5,(p_end - _stext)@l(r5)	/* get _end */
 5:	bl	copy_and_flush		/* copy the rest */

From eeaab663a06c3ddc7213d30d304de73e30bc772e Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:16 -0500
Subject: [PATCH 26/38] powerpc/book3e/kdump: Enable crash_kexec_wait_realmode

While book3e doesn't have "real mode", we still want to wait for
all the non-crash cpus to complete their shutdown.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/crash.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 51dbace3269b..2bb252c01f07 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -221,8 +221,8 @@ void crash_kexec_secondary(struct pt_regs *regs)
 #endif	/* CONFIG_SMP */
 
 /* wait for all the CPUs to hit real mode but timeout if they don't come in */
-#if defined(CONFIG_SMP) && defined(CONFIG_PPC_STD_MMU_64)
-static void crash_kexec_wait_realmode(int cpu)
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
+static void __maybe_unused crash_kexec_wait_realmode(int cpu)
 {
 	unsigned int msecs;
 	int i;
@@ -244,7 +244,7 @@ static void crash_kexec_wait_realmode(int cpu)
 }
 #else
 static inline void crash_kexec_wait_realmode(int cpu) {}
-#endif	/* CONFIG_SMP && CONFIG_PPC_STD_MMU_64 */
+#endif	/* CONFIG_SMP && CONFIG_PPC64 */
 
 /*
  * Register a function to be called on shutdown.  Only use this if you

From ecc4999f68d157a25c500d18586a16f09a029cb4 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:17 -0500
Subject: [PATCH 27/38] powerpc/book3e-64: Don't limit paca to 256 MiB

This limit only makes sense on book3s, and on book3e it can cause
problems with kdump if we don't have any memory under 256 MiB.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/paca.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 5a23b69f8129..01ea0edf0579 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -204,14 +204,19 @@ static int __initdata paca_size;
 
 void __init allocate_pacas(void)
 {
-	int cpu, limit;
+	u64 limit;
+	int cpu;
 
+	limit = ppc64_rma_size;
+
+#ifdef CONFIG_PPC_BOOK3S_64
 	/*
 	 * We can't take SLB misses on the paca, and we want to access them
 	 * in real mode, so allocate them within the RMA and also within
 	 * the first segment.
 	 */
-	limit = min(0x10000000ULL, ppc64_rma_size);
+	limit = min(0x10000000ULL, limit);
+#endif
 
 	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids);
 

From cf904e3088fd3760d9f6fed5fde755ac299590b7 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Tue, 6 Oct 2015 22:48:18 -0500
Subject: [PATCH 28/38] powerpc/book3e-64/kexec: create an identity TLB mapping

book3e has no real MMU mode so we have to create an identity TLB
mapping to make sure we can access the real physical address.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood: cleanup, and split off some changes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/misc_64.S | 52 ++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 6e4168cf4698..246ad8c525b1 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -26,6 +26,7 @@
 #include <asm/thread_info.h>
 #include <asm/kexec.h>
 #include <asm/ptrace.h>
+#include <asm/mmu.h>
 
 	.text
 
@@ -496,6 +497,51 @@ kexec_flag:
 
 
 #ifdef CONFIG_KEXEC
+#ifdef CONFIG_PPC_BOOK3E
+/*
+ * BOOK3E has no real MMU mode, so we have to setup the initial TLB
+ * for a core to identity map v:0 to p:0.  This current implementation
+ * assumes that 1G is enough for kexec.
+ */
+kexec_create_tlb:
+	/*
+	 * Invalidate all non-IPROT TLB entries to avoid any TLB conflict.
+	 * IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict.
+	 */
+	PPC_TLBILX_ALL(0,R0)
+	sync
+	isync
+
+	mfspr	r10,SPRN_TLB1CFG
+	andi.	r10,r10,TLBnCFG_N_ENTRY	/* Extract # entries */
+	subi	r10,r10,1	/* Last entry: no conflict with kernel text */
+	lis	r9,MAS0_TLBSEL(1)@h
+	rlwimi	r9,r10,16,4,15		/* Setup MAS0 = TLBSEL | ESEL(r9) */
+
+/* Set up a temp identity mapping v:0 to p:0 and return to it. */
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
+#define M_IF_NEEDED	MAS2_M
+#else
+#define M_IF_NEEDED	0
+#endif
+	mtspr	SPRN_MAS0,r9
+
+	lis	r9,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
+	mtspr	SPRN_MAS1,r9
+
+	LOAD_REG_IMMEDIATE(r9, 0x0 | M_IF_NEEDED)
+	mtspr	SPRN_MAS2,r9
+
+	LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX)
+	mtspr	SPRN_MAS3,r9
+	li	r9,0
+	mtspr	SPRN_MAS7,r9
+
+	tlbwe
+	isync
+	blr
+#endif
 
 /* kexec_smp_wait(void)
  *
@@ -525,6 +571,10 @@ _GLOBAL(kexec_smp_wait)
  * don't overwrite r3 here, it is live for kexec_wait above.
  */
 real_mode:	/* assume normal blr return */
+#ifdef CONFIG_PPC_BOOK3E
+	/* Create an identity mapping. */
+	b	kexec_create_tlb
+#else
 1:	li	r9,MSR_RI
 	li	r10,MSR_DR|MSR_IR
 	mflr	r11		/* return address to SRR0 */
@@ -536,7 +586,7 @@ real_mode:	/* assume normal blr return */
 	mtspr	SPRN_SRR1,r10
 	mtspr	SPRN_SRR0,r11
 	rfid
-
+#endif
 
 /*
  * kexec_sequence(newstack, start, image, control, clear_all())

From 567cf94dc7801f6602a73b55f04cb096a3c351fb Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:19 -0500
Subject: [PATCH 29/38] powerpc/book3e-64/kexec: Enable SMP release

The SMP release mechanism for FSL book3e is different from when booting
with normal hardware.  In theory we could simulate the normal spin
table mechanism, but not at the addresses U-Boot put in the device tree
-- so there'd need to be even more communication between the kernel and
kexec to set that up.  Instead, kexec-tools will set a boolean property
linux,booted-from-kexec in the /chosen node.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: devicetree@vger.kernel.org
---
 Documentation/devicetree/bindings/chosen.txt |  8 ++++++++
 arch/powerpc/kernel/setup_64.c               | 17 ++++++++++++++++-
 2 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index ed838f453f7a..6ae9d82d4c37 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -44,3 +44,11 @@ Implementation note: Linux will look for the property "linux,stdout-path" or
 on PowerPC "stdout" if "stdout-path" is not found.  However, the
 "linux,stdout-path" and "stdout" properties are deprecated. New platforms
 should only use the "stdout-path" property.
+
+linux,booted-from-kexec
+-----------------------
+
+This property is set (currently only on PowerPC, and only needed on
+book3e) by some versions of kexec-tools to tell the new kernel that it
+is being booted by kexec, as the booting environment may differ (e.g.
+a different secondary CPU release mechanism)
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 505ec2c698e0..5c03a6a9b054 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -340,11 +340,26 @@ void early_setup_secondary(void)
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+static bool use_spinloop(void)
+{
+	if (!IS_ENABLED(CONFIG_PPC_BOOK3E))
+		return true;
+
+	/*
+	 * When book3e boots from kexec, the ePAPR spin table does
+	 * not get used.
+	 */
+	return of_property_read_bool(of_chosen, "linux,booted-from-kexec");
+}
+
 void smp_release_cpus(void)
 {
 	unsigned long *ptr;
 	int i;
 
+	if (!use_spinloop())
+		return;
+
 	DBG(" -> smp_release_cpus()\n");
 
 	/* All secondary cpus are spinning on a common spinloop, release them
@@ -524,7 +539,7 @@ void __init setup_system(void)
 	 * Freescale Book3e parts spin in a loop provided by firmware,
 	 * so smp_release_cpus() does nothing for them
 	 */
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_FSL_BOOK3E)
+#if defined(CONFIG_SMP)
 	/* Release secondary cpus out of their spinloops at 0x60 now that
 	 * we can map physical -> logical CPU ids
 	 */

From ffda09a9941c18d9f08d1176d55588d505f62912 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:20 -0500
Subject: [PATCH 30/38] powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32

The way VIRT_PHYS_OFFSET is not correct on book3e-64, because
it does not account for CONFIG_RELOCATABLE other than via the
32-bit-only virt_phys_offset.

book3e-64 can (and if the comment about a GCC miscompilation is still
relevant, should) use the normal ppc64 __va/__pa.

At this point, only booke-32 will use VIRT_PHYS_OFFSET, so given the
issues with its calculation, restrict its definition to booke-32.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/page.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 96534b4e5a64..3140c19c448c 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -108,12 +108,13 @@ extern long long virt_phys_offset;
 #endif
 
 /* See Description below for VIRT_PHYS_OFFSET */
-#ifdef CONFIG_RELOCATABLE_PPC32
+#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
+#ifdef CONFIG_RELOCATABLE
 #define VIRT_PHYS_OFFSET virt_phys_offset
 #else
 #define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
 #endif
-
+#endif
 
 #ifdef CONFIG_PPC64
 #define MEMORY_START	0UL
@@ -206,7 +207,7 @@ extern long long virt_phys_offset;
  * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
  * the other definitions for __va & __pa.
  */
-#ifdef CONFIG_BOOKE
+#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE)
 #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
 #define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
 #else

From ae73e4ccbc91853259d730fd8c5089bdf06a4fa3 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 6 Oct 2015 22:48:21 -0500
Subject: [PATCH 31/38] powerpc/book3e-64/kexec: Set "r4 = 0" when entering
 spinloop

book3e_secondary_core_init will only create a TLB entry if r4 = 0,
so do so.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/kernel/misc_64.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 246ad8c525b1..ddbc535a6d0f 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -485,6 +485,8 @@ _GLOBAL(kexec_wait)
 	mtsrr1	r11
 	rfid
 #else
+	/* Create TLB entry in book3e_secondary_core_init */
+	li	r4,0
 	ba	0x60
 #endif
 #endif

From 96eea6426f56042c28eff849cb2cc01895db081e Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Tue, 6 Oct 2015 22:48:22 -0500
Subject: [PATCH 32/38] powerpc/book3e-64: Enable kexec

Allow KEXEC for book3e, and bypass or convert non-book3e stuff
in kexec code.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
[scottwood@freescale.com: move code to minimize diff, and cleanup]
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/Kconfig                   |  2 +-
 arch/powerpc/kernel/machine_kexec_64.c | 18 ++++++++++++++++++
 arch/powerpc/kernel/misc_64.S          |  6 ++++++
 3 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9a7057ec2154..db49e0d796b1 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -419,7 +419,7 @@ config PPC64_SUPPORTS_MEMORY_FAILURE
 
 config KEXEC
 	bool "kexec system call"
-	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) || PPC_BOOK3E
 	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 1a74446fd9e5..0fbd75d185d7 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -30,6 +30,21 @@
 #include <asm/smp.h>
 #include <asm/hw_breakpoint.h>
 
+#ifdef CONFIG_PPC_BOOK3E
+int default_machine_kexec_prepare(struct kimage *image)
+{
+	int i;
+	/*
+	 * Since we use the kernel fault handlers and paging code to
+	 * handle the virtual mode, we must make sure no destination
+	 * overlaps kernel static data or bss.
+	 */
+	for (i = 0; i < image->nr_segments; i++)
+		if (image->segment[i].mem < __pa(_end))
+			return -ETXTBSY;
+	return 0;
+}
+#else
 int default_machine_kexec_prepare(struct kimage *image)
 {
 	int i;
@@ -95,6 +110,7 @@ int default_machine_kexec_prepare(struct kimage *image)
 
 	return 0;
 }
+#endif /* !CONFIG_PPC_BOOK3E */
 
 static void copy_segments(unsigned long ind)
 {
@@ -365,6 +381,7 @@ void default_machine_kexec(struct kimage *image)
 	/* NOTREACHED */
 }
 
+#ifndef CONFIG_PPC_BOOK3E
 /* Values we need to export to the second kernel via the device tree. */
 static unsigned long htab_base;
 static unsigned long htab_size;
@@ -411,3 +428,4 @@ static int __init export_htab_values(void)
 	return 0;
 }
 late_initcall(export_htab_values);
+#endif /* !CONFIG_PPC_BOOK3E */
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index ddbc535a6d0f..db475d41b57a 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -631,9 +631,13 @@ _GLOBAL(kexec_sequence)
 	lhz	r25,PACAHWCPUID(r13)	/* get our phys cpu from paca */
 
 	/* disable interrupts, we are overwriting kernel data next */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
 	mfmsr	r3
 	rlwinm	r3,r3,0,17,15
 	mtmsrd	r3,1
+#endif
 
 	/* copy dest pages, flush whole dest image */
 	mr	r3,r29
@@ -655,6 +659,7 @@ _GLOBAL(kexec_sequence)
 	li	r6,1
 	stw	r6,kexec_flag-1b(5)
 
+#ifndef CONFIG_PPC_BOOK3E
 	/* clear out hardware hash page table and tlb */
 #if !defined(_CALL_ELF) || _CALL_ELF != 2
 	ld	r12,0(r27)		/* deref function descriptor */
@@ -663,6 +668,7 @@ _GLOBAL(kexec_sequence)
 #endif
 	mtctr	r12
 	bctrl				/* ppc_md.hpte_clear_all(void); */
+#endif /* !CONFIG_PPC_BOOK3E */
 
 /*
  *   kexec image calling is:

From 9100d20c5b6307bacd8756aba2f157cb1a8ffb56 Mon Sep 17 00:00:00 2001
From: Sudeep Holla <Sudeep.Holla@arm.com>
Date: Mon, 21 Sep 2015 16:47:00 +0100
Subject: [PATCH 33/38] powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of
 redundant mpic_irq_set_wake

mpic_irq_set_wake return -ENXIO for non FSL MPIC and sets IRQF_NO_SUSPEND
flag for FSL ones. enable_irq_wake already returns -ENXIO if irq_set_wak
is not implemented. Also there's no need to set the IRQF_NO_SUSPEND flag
as it doesn't guarantee wakeup for that interrupt.

This patch removes the redundant mpic_irq_set_wake and sets the
IRQCHIP_SKIP_SET_WAKE for only FSL MPIC.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Hongtao Jia <hongtao.jia@freescale.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/mpic.c | 23 ++++-------------------
 1 file changed, 4 insertions(+), 19 deletions(-)

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 537e5db85a06..123e43612f0a 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -924,22 +924,6 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 	return IRQ_SET_MASK_OK_NOCOPY;
 }
 
-static int mpic_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);
-	struct mpic *mpic = mpic_from_irq_data(d);
-
-	if (!(mpic->flags & MPIC_FSL))
-		return -ENXIO;
-
-	if (on)
-		desc->action->flags |= IRQF_NO_SUSPEND;
-	else
-		desc->action->flags &= ~IRQF_NO_SUSPEND;
-
-	return 0;
-}
-
 void mpic_set_vector(unsigned int virq, unsigned int vector)
 {
 	struct mpic *mpic = mpic_from_irq(virq);
@@ -977,7 +961,6 @@ static struct irq_chip mpic_irq_chip = {
 	.irq_unmask	= mpic_unmask_irq,
 	.irq_eoi	= mpic_end_irq,
 	.irq_set_type	= mpic_set_irq_type,
-	.irq_set_wake	= mpic_irq_set_wake,
 };
 
 #ifdef CONFIG_SMP
@@ -992,7 +975,6 @@ static struct irq_chip mpic_tm_chip = {
 	.irq_mask	= mpic_mask_tm,
 	.irq_unmask	= mpic_unmask_tm,
 	.irq_eoi	= mpic_end_irq,
-	.irq_set_wake	= mpic_irq_set_wake,
 };
 
 #ifdef CONFIG_MPIC_U3_HT_IRQS
@@ -1283,8 +1265,11 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 		flags |= MPIC_NO_RESET;
 	if (of_get_property(node, "single-cpu-affinity", NULL))
 		flags |= MPIC_SINGLE_DEST_CPU;
-	if (of_device_is_compatible(node, "fsl,mpic"))
+	if (of_device_is_compatible(node, "fsl,mpic")) {
 		flags |= MPIC_FSL | MPIC_LARGE_VECTORS;
+		mpic_irq_chip.flags |= IRQCHIP_SKIP_SET_WAKE;
+		mpic_tm_chip.flags |= IRQCHIP_SKIP_SET_WAKE;
+	}
 
 	mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
 	if (mpic == NULL)

From 9d28cc811bbb43c7ca8dc8be375bab1e0efb037b Mon Sep 17 00:00:00 2001
From: Christophe Leroy <christophe.leroy@c-s.fr>
Date: Fri, 21 Aug 2015 18:48:31 +0200
Subject: [PATCH 34/38] powerpc: handle error case in cpm_muram_alloc()

rh_alloc() returns (unsigned long)-ERRxx on error, which may
result in overwriting memory outside the MURAM AREA.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/sysdev/cpm_common.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e2ea51961979..e00a5ee58fd7 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -147,7 +147,8 @@ unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
 	spin_lock_irqsave(&cpm_muram_lock, flags);
 	cpm_muram_info.alignment = align;
 	start = rh_alloc(&cpm_muram_info, size, "commproc");
-	memset_io(cpm_muram_addr(start), 0, size);
+	if (!IS_ERR_VALUE(start))
+		memset_io(cpm_muram_addr(start), 0, size);
 	spin_unlock_irqrestore(&cpm_muram_lock, flags);
 
 	return start;

From 7a1db41d83881bed7d5e13972ed308f05153ceee Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 27 Oct 2015 17:41:16 -0500
Subject: [PATCH 35/38] powerpc/fsl: Add #clock-cells and clockgen label to
 clockgen nodes

This allows new-style clock references to be used, which is needed for
fman.  The old clock nodes will be removed and all clock references
converted to new-style once the qoriq-cpufreq driver is updated to stop
depending on the old-style references in cpu nodes.

Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi | 3 ++-
 arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
index 4ece1edbff63..88cd70de4f86 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
@@ -32,13 +32,14 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-global-utilities@e1000 {
+clockgen: global-utilities@e1000 {
 	compatible = "fsl,qoriq-clockgen-1.0";
 	ranges = <0x0 0xe1000 0x1000>;
 	reg = <0xe1000 0x1000>;
 	clock-frequency = <0>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	#clock-cells = <2>;
 
 	sysclk: sysclk {
 		#clock-cells = <0>;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
index 48e0b6e4ce33..6dfd7c5357ab 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
@@ -32,12 +32,13 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-global-utilities@e1000 {
+clockgen: global-utilities@e1000 {
 	compatible = "fsl,qoriq-clockgen-2.0";
 	ranges = <0x0 0xe1000 0x1000>;
 	reg = <0xe1000 0x1000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	#clock-cells = <2>;
 
 	sysclk: sysclk {
 		#clock-cells = <0>;

From d55ad2967d891ef9c48adf46c6d915bec81a9375 Mon Sep 17 00:00:00 2001
From: Igal Liberman <Igal.Liberman@freescale.com>
Date: Wed, 5 Aug 2015 06:38:12 +0300
Subject: [PATCH 36/38] powerpc/mpc85xx: Create dts components for the FSL
 QorIQ DPAA FMan

Based on prior work by Andy Fleming <afleming@freescale.com>

Signed-off-by: Shruti Kanetkar <Shruti@freescale.com>
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 .../boot/dts/fsl/qoriq-fman-0-10g-0.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman-0-1g-0.dtsi       |  69 ++++++++++++
 .../boot/dts/fsl/qoriq-fman-0-1g-1.dtsi       |  68 +++++++++++
 .../boot/dts/fsl/qoriq-fman-0-1g-2.dtsi       |  68 +++++++++++
 .../boot/dts/fsl/qoriq-fman-0-1g-3.dtsi       |  68 +++++++++++
 .../boot/dts/fsl/qoriq-fman-0-1g-4.dtsi       |  68 +++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi   | 101 +++++++++++++++++
 .../boot/dts/fsl/qoriq-fman-1-10g-0.dtsi      |  61 ++++++++++
 .../boot/dts/fsl/qoriq-fman-1-1g-0.dtsi       |  68 +++++++++++
 .../boot/dts/fsl/qoriq-fman-1-1g-1.dtsi       |  68 +++++++++++
 .../boot/dts/fsl/qoriq-fman-1-1g-2.dtsi       |  68 +++++++++++
 .../boot/dts/fsl/qoriq-fman-1-1g-3.dtsi       |  68 +++++++++++
 .../boot/dts/fsl/qoriq-fman-1-1g-4.dtsi       |  68 +++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi   | 101 +++++++++++++++++
 .../fsl/qoriq-fman3-0-10g-0-best-effort.dtsi  |  66 +++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi     |  63 +++++++++++
 .../fsl/qoriq-fman3-0-10g-1-best-effort.dtsi  |  66 +++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi     |  63 +++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi      |  62 ++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi  | 106 ++++++++++++++++++
 .../boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi     |  63 +++++++++++
 .../boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi     |  63 +++++++++++
 .../boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi      |  62 ++++++++++
 .../boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi      |  62 ++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi  | 106 ++++++++++++++++++
 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi |  94 ++++++++++++++++
 35 files changed, 2440 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
new file mode 100644
index 000000000000..eb77675c255a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+	};
+
+	xmdio0: mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		interrupts = <101 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
new file mode 100644
index 000000000000..b965bc219bae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		tbi-handle = <&tbi0>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio0: mdio@e1120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe1120 0xee0>;
+		interrupts = <100 2 0 0>;
+
+		tbi0: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
new file mode 100644
index 000000000000..9eb6e6dd7cf9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		tbi-handle = <&tbi1>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e3120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe3120 0xee0>;
+
+		tbi1: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
new file mode 100644
index 000000000000..092b89936743
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		tbi-handle = <&tbi2>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e5120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe5120 0xee0>;
+
+		tbi2: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
new file mode 100644
index 000000000000..2df0dc876045
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		tbi-handle = <&tbi3>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e7120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe7120 0xee0>;
+
+		tbi3: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
new file mode 100644
index 000000000000..5fceb2438fdc
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		tbi-handle = <&tbi4>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e9120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe9120 0xee0>;
+
+		tbi4: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
new file mode 100644
index 000000000000..abd01d466de4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x40 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	fman0_oh_0x1: port@81000 {
+		cell-index = <0x1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+		status = "disabled";
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+		status = "disabled";
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x87000 0x1000>;
+		status = "disabled";
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
new file mode 100644
index 000000000000..83ae87b69d92
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
@@ -0,0 +1,61 @@
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
new file mode 100644
index 000000000000..b0f0e36a4eac
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e1120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe1120 0xee0>;
+
+		tbi5: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
new file mode 100644
index 000000000000..a3a79f8552a3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e3120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe3120 0xee0>;
+
+		tbi6: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
new file mode 100644
index 000000000000..96a69a84b8a8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e5120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe5120 0xee0>;
+
+		tbi7: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
new file mode 100644
index 000000000000..7405d1940133
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e7120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe7120 0xee0>;
+
+		tbi8: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
new file mode 100644
index 000000000000..f49ad69e5212
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e9120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe9120 0xee0>;
+
+		tbi9: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
new file mode 100644
index 000000000000..debea75fd3f0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman";
+	ranges = <0 0x500000 0x100000>;
+	reg = <0x500000 0x100000>;
+	interrupts = <97 2 0 0>, <16 2 1 0>;
+	clocks = <&clockgen 3 1>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x60 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	fman1_oh_0x1: port@81000 {
+		cell-index = <0x1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	fman1_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman1_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman1_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman1_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+		status = "disabled";
+	};
+
+	fman1_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+		status = "disabled";
+	};
+
+	fman1_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x87000 0x1000>;
+		status = "disabled";
+	};
+
+	ptp_timer1: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
new file mode 100644
index 000000000000..2e441fab6d8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 000000000000..0b8f87f79d15
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,63 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
new file mode 100644
index 000000000000..ba6f2275d3f6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 000000000000..886003805592
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,63 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 000000000000..ace9c13648ce
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 000000000000..a4fc28654b31
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 000000000000..78596faadf99
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 000000000000..af93abd86d78
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 000000000000..97cffd74bf3d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 000000000000..232c5c277bdb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
new file mode 100644
index 000000000000..3a20e0d1a6d2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
new file mode 100644
index 000000000000..89d64ee282b0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -0,0 +1,63 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
new file mode 100644
index 000000000000..7fa9260889c6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -0,0 +1,63 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman1_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
new file mode 100644
index 000000000000..3d236662bf07
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
new file mode 100644
index 000000000000..97dc2eedd462
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
new file mode 100644
index 000000000000..f084dd2f0bec
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
new file mode 100644
index 000000000000..bb627b3bf3db
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
new file mode 100644
index 000000000000..821ed12225d4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
new file mode 100644
index 000000000000..e245f1a1e42a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman1_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
new file mode 100644
index 000000000000..82750ac944c7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman";
+	ranges = <0 0x500000 0x100000>;
+	reg = <0x500000 0x100000>;
+	interrupts = <97 2 0 0>, <16 2 1 0>;
+	clocks = <&clockgen 3 1>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x820 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman1_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman1_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman1_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman1_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman1_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman1_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio1: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer1: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
new file mode 100644
index 000000000000..7f60b6060176
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
@@ -0,0 +1,94 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x30000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+
+	ptp_timer0: ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+};

From da414bb923d95f1f59fbf534a0e2ef9f52ffc667 Mon Sep 17 00:00:00 2001
From: Igal Liberman <Igal.Liberman@freescale.com>
Date: Wed, 5 Aug 2015 06:42:07 +0300
Subject: [PATCH 37/38] powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the
 SoC device tree(s)

Based on prior work by Andy Fleming <afleming@freescale.com>

Signed-off-by: Shruti Kanetkar <Shruti@freescale.com>
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi  |  9 ++-
 arch/powerpc/boot/dts/fsl/b4860si-post.dtsi | 20 ++++-
 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi  | 12 ++-
 arch/powerpc/boot/dts/fsl/b4si-post.dtsi    | 31 +++++++-
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 29 ++++++-
 arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi  | 10 ++-
 arch/powerpc/boot/dts/fsl/p3041si-post.dtsi | 29 ++++++-
 arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi  | 10 ++-
 arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 48 ++++++++++-
 arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi  | 15 +++-
 arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 29 ++++++-
 arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi  | 10 ++-
 arch/powerpc/boot/dts/fsl/p5040si-post.dtsi | 56 ++++++++++++-
 arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi  | 17 +++-
 arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 19 +++++
 arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi  |  6 ++
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 31 ++++++++
 arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi  |  9 ++-
 arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 43 ++++++++++
 arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi  | 11 +++
 arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 88 ++++++++++++++++++++-
 arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi  | 22 +++++-
 22 files changed, 536 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 4257a7739dd1..bc3bf9333dde 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4420 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -54,8 +54,13 @@ aliases {
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;
-	};
 
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+	};
 
 	cpus {
 		#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
index be91803addf9..868719821106 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4860 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -258,6 +258,24 @@ rcpm: global-utilities@e2000 {
 		compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
 	};
 
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+	};
+
 	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,b4860-l2-cache-controller";
 		reg = <0xc20000 0x40000>;
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 6823caa6c9cc..8797ce146512 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4860 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -54,6 +54,16 @@ aliases {
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
 	};
 
 
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index d45ff04c2dde..74866ac52f39 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4420 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -465,4 +465,33 @@ qman: qman@318000 {
 	bman: bman@31a000 {
 		interrupts = <16 2 1 29>;
 	};
+
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+	fman@400000 {
+		interrupts = <96 2 0 0>, <16 2 1 30>;
+
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 04ad177b6a12..51e975d7631a 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P2041/P2040 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -430,4 +430,31 @@ crypto: crypto@300000 {
 
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index b1ea147f2995..941274c41f21 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P2041 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -72,6 +72,14 @@ aliases {
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 2cab18af6df2..187676fa8d83 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P3041 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -457,4 +457,31 @@ crypto: crypto@300000 {
 
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index dc5f4b362c24..50b73e8e638f 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P3041 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -73,6 +73,14 @@ aliases {
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index dfc76bc41cb2..a0252085f858 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P4080/P4040 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -513,4 +513,50 @@ crypto: crypto@300000 {
 
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@f0000 {
+		};
+	};
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+	fman@500000 {
+		enet5: ethernet@e0000 {
+		};
+
+		enet6: ethernet@e2000 {
+		};
+
+		enet7: ethernet@e4000 {
+		};
+
+		enet8: ethernet@e6000 {
+		};
+
+		enet9: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index 38bde0958672..d56a546b73e6 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -72,6 +72,19 @@ aliases {
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index b77923ad72cf..cd008cdd2889 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P5020/5010 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -448,4 +448,31 @@ crypto@300000 {
 	raideng@320000 {
 		fsl,iommu-parent = <&pamu1>;
 	};
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index 1cc61e126e4c..bfba0b4f1cbb 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -79,6 +79,14 @@ aliases {
 		raideng_jr1 = &raideng_jr1;
 		raideng_jr2 = &raideng_jr2;
 		raideng_jr3 = &raideng_jr3;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 6d214526b81b..2f227b1345ad 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * P5040 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -422,4 +422,58 @@ crypto@300000 {
 
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-1g-4.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+	fman@500000 {
+		enet6: ethernet@e0000 {
+		};
+
+		enet7: ethernet@e2000 {
+		};
+
+		enet8: ethernet@e4000 {
+		};
+
+		enet9: ethernet@e6000 {
+		};
+
+		enet10: ethernet@e8000 {
+		};
+
+		enet11: ethernet@f0000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index b048a2be05a8..0659d5bb69b8 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * P5040 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -72,6 +72,21 @@ aliases {
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+		ethernet10 = &enet10;
+		ethernet11 = &enet11;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index df1f068a5376..518ddaa8da2d 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -327,4 +327,23 @@ sata@220000 {
 	};
 
 /include/ "qoriq-sec5.0-0.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
index 1f1a9f8474d5..3e1528abf3f4 100644
--- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -59,6 +59,12 @@ aliases {
 		sdhc = &sdhc;
 
 		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 9770d0278493..d30b3de1cfc5 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -547,4 +547,35 @@ sata@221000 {
 /include/ "qoriq-sec5.0-0.dtsi"
 /include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
index bbb7025ca9c2..fcfa38ae5e02 100644
--- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2013-2014 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -58,6 +58,13 @@ aliases {
 		sdhc = &sdhc;
 
 		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index 32c790ae7fde..c744569a20e1 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -630,6 +630,49 @@ usb1: usb@211000 {
 /include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
 
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+
 	L2_1: l2-cache-controller@c20000 {
 		/* Cluster 0 L2 cache */
 		compatible = "fsl,t2080-l2-cache-controller";
diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
index e71ceb0e1100..c2e57203910d 100644
--- a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
@@ -51,6 +51,17 @@ aliases {
 		serial3 = &serial3;
 
 		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index d806360d0f64..68c4eadc19e3 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -1,7 +1,7 @@
 /*
  * T4240 Silicon/SoC Device Tree Source (post include)
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -1068,6 +1068,92 @@ usb1: usb@211000 {
 /include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
 
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			status = "disabled";
+		};
+
+		mdio@fd000 {
+			status = "disabled";
+		};
+	};
+
+/include/ "qoriq-fman3-1.dtsi"
+/include/ "qoriq-fman3-1-1g-0.dtsi"
+/include/ "qoriq-fman3-1-1g-1.dtsi"
+/include/ "qoriq-fman3-1-1g-2.dtsi"
+/include/ "qoriq-fman3-1-1g-3.dtsi"
+/include/ "qoriq-fman3-1-1g-4.dtsi"
+/include/ "qoriq-fman3-1-1g-5.dtsi"
+/include/ "qoriq-fman3-1-10g-0.dtsi"
+/include/ "qoriq-fman3-1-10g-1.dtsi"
+	fman@500000 {
+		enet8: ethernet@e0000 {
+		};
+
+		enet9: ethernet@e2000 {
+		};
+
+		enet10: ethernet@e4000 {
+		};
+
+		enet11: ethernet@e6000 {
+		};
+
+		enet12: ethernet@e8000 {
+		};
+
+		enet13: ethernet@ea000 {
+		};
+
+		enet14: ethernet@f0000 {
+		};
+
+		enet15: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+
 	L2_1: l2-cache-controller@c20000 {
 		compatible = "fsl,t4240-l2-cache-controller";
 		reg = <0xc20000 0x40000>;
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
index 261a3abb1a55..1184a746fcb1 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -1,7 +1,7 @@
 /*
  * T4240 Silicon/SoC Device Tree Source (pre include)
  *
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -51,6 +51,7 @@ aliases {
 		serial2 = &serial2;
 		serial3 = &serial3;
 		crypto = &crypto;
+
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;
@@ -59,6 +60,25 @@ aliases {
 		dma1 = &dma1;
 		dma2 = &dma2;
 		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+		ethernet10 = &enet10;
+		ethernet11 = &enet11;
+		ethernet12 = &enet12;
+		ethernet13 = &enet13;
+		ethernet14 = &enet14;
+		ethernet15 = &enet15;
 	};
 
 	cpus {

From e1f580e8ced56d7c0a2b096e00e8b8e861d13671 Mon Sep 17 00:00:00 2001
From: Kevin Hao <haokexin@gmail.com>
Date: Thu, 22 Oct 2015 20:23:48 +0800
Subject: [PATCH 38/38] powerpc/e6500: hw tablewalk: make sure we invalidate
 and write to the same tlb entry

In order to workaround Erratum A-008139, we have to invalidate the
tlb entry with tlbilx before overwriting. Due to the performance
consideration, we don't add any memory barrier when acquire/release
the tcd lock. This means the two load instructions for esel_next do
have the possibility to return different value. This is definitely
not acceptable due to the Erratum A-008139. We have two options to
fix this issue:
  a) Add memory barrier when acquire/release tcd lock to order the
     load/store to esel_next.
  b) Just make sure to invalidate and write to the same tlb entry and
     tolerate the race that we may get the wrong value and overwrite
     the tlb entry just updated by the other thread.

We observe better performance using option b. So reserve an additional
register to save the value of the esel_next.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/include/asm/exception-64e.h | 11 ++++++-----
 arch/powerpc/mm/tlb_low_64e.S            | 25 ++++++++++++++++--------
 2 files changed, 23 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index 344fc43a7076..a703452d67b6 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -69,13 +69,14 @@
 #define EX_TLB_ESR	( 9 * 8) /* Level 0 and 2 only */
 #define EX_TLB_SRR0	(10 * 8)
 #define EX_TLB_SRR1	(11 * 8)
+#define EX_TLB_R7	(12 * 8)
 #ifdef CONFIG_BOOK3E_MMU_TLB_STATS
-#define EX_TLB_R8	(12 * 8)
-#define EX_TLB_R9	(13 * 8)
-#define EX_TLB_LR	(14 * 8)
-#define EX_TLB_SIZE	(15 * 8)
+#define EX_TLB_R8	(13 * 8)
+#define EX_TLB_R9	(14 * 8)
+#define EX_TLB_LR	(15 * 8)
+#define EX_TLB_SIZE	(16 * 8)
 #else
-#define EX_TLB_SIZE	(12 * 8)
+#define EX_TLB_SIZE	(13 * 8)
 #endif
 
 #define	START_EXCEPTION(label)						\
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index e4185581c5a7..29d6987c37ba 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -68,11 +68,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
 	ld	r14,PACAPGD(r13)
 	std	r15,EX_TLB_R15(r12)
 	std	r10,EX_TLB_CR(r12)
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	std	r7,EX_TLB_R7(r12)
+#endif
 	TLB_MISS_PROLOG_STATS
 .endm
 
 .macro tlb_epilog_bolted
 	ld	r14,EX_TLB_CR(r12)
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	ld	r7,EX_TLB_R7(r12)
+#endif
 	ld	r10,EX_TLB_R10(r12)
 	ld	r11,EX_TLB_R11(r12)
 	ld	r13,EX_TLB_R13(r12)
@@ -297,6 +303,7 @@ itlb_miss_fault_bolted:
  * r13 = PACA
  * r11 = tlb_per_core ptr
  * r10 = crap (free to use)
+ * r7  = esel_next
  */
 tlb_miss_common_e6500:
 	crmove	cr2*4+2,cr0*4+2		/* cr2.eq != 0 if kernel address */
@@ -325,7 +332,11 @@ BEGIN_FTR_SECTION		/* CPU_FTR_SMT */
 	bne	10b
 	b	1b
 	.previous
+END_FTR_SECTION_IFSET(CPU_FTR_SMT)
 
+	lbz	r7,TCD_ESEL_NEXT(r11)
+
+BEGIN_FTR_SECTION		/* CPU_FTR_SMT */
 	/*
 	 * Erratum A-008139 says that we can't use tlbwe to change
 	 * an indirect entry in any way (including replacing or
@@ -334,8 +345,7 @@ BEGIN_FTR_SECTION		/* CPU_FTR_SMT */
 	 * with tlbilx before overwriting.
 	 */
 
-	lbz	r15,TCD_ESEL_NEXT(r11)
-	rlwinm	r10,r15,16,0xff0000
+	rlwinm	r10,r7,16,0xff0000
 	oris	r10,r10,MAS0_TLBSEL(1)@h
 	mtspr	SPRN_MAS0,r10
 	isync
@@ -429,15 +439,14 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT)
 	mtspr	SPRN_MAS2,r15
 
 tlb_miss_huge_done_e6500:
-	lbz	r15,TCD_ESEL_NEXT(r11)
 	lbz	r16,TCD_ESEL_MAX(r11)
 	lbz	r14,TCD_ESEL_FIRST(r11)
-	rlwimi	r10,r15,16,0x00ff0000	/* insert esel_next into MAS0 */
-	addi	r15,r15,1		/* increment esel_next */
+	rlwimi	r10,r7,16,0x00ff0000	/* insert esel_next into MAS0 */
+	addi	r7,r7,1			/* increment esel_next */
 	mtspr	SPRN_MAS0,r10
-	cmpw	r15,r16
-	iseleq	r15,r14,r15		/* if next == last use first */
-	stb	r15,TCD_ESEL_NEXT(r11)
+	cmpw	r7,r16
+	iseleq	r7,r14,r7		/* if next == last use first */
+	stb	r7,TCD_ESEL_NEXT(r11)
 
 	tlbwe