diff --git a/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
index 46c5383f0eee..f73316625608 100644
--- a/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
@@ -170,6 +170,17 @@ pruss2_iepclk_mux: iepclk-mux@30 {
 				};
 			};
 
+			pruss2_iep: iep@2e000 {
+				compatible = "ti,am5728-icss-iep";
+				reg = <0x2e000 0x31c>;
+				clocks = <&pruss2_iepclk_mux>;
+			};
+
+			pruss2_ecap: ecap@30000 {
+				compatible = "ti,pruss-ecap";
+				reg = <0x30000 0x60>;
+			};
+
 			pruss2_mii_rt: mii-rt@32000 {
 				compatible = "ti,pruss-mii", "syscon";
 				reg = <0x32000 0x58>;
diff --git a/arch/arm/boot/dts/ti/omap/am571x-idk.dts b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
index 322cf79d22e9..02653b440585 100644
--- a/arch/arm/boot/dts/ti/omap/am571x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am571x-idk.dts
@@ -214,5 +214,11 @@ &pruss1_mdio {
 };
 
 &pruss2_mdio {
-	status = "disabled";
+	reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
+};
+
+&pruss2_eth {
+	ti,pruss-gp-mux-sel = <4>,      /* MII2, needed for PRUSS1_MII0 */
+			      <4>;      /* MII2, needed for PRUSS1_MII1 */
 };
diff --git a/arch/arm/boot/dts/ti/omap/am572x-idk.dts b/arch/arm/boot/dts/ti/omap/am572x-idk.dts
index 94a738cb0a4d..54a8ccb9ca14 100644
--- a/arch/arm/boot/dts/ti/omap/am572x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am572x-idk.dts
@@ -28,10 +28,12 @@ &mmc2 {
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
 
-&pruss1_mdio {
-	status = "disabled";
+&pruss2_eth0_phy {
+	reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <2>;   /* PHY datasheet states 1uS min */
 };
 
-&pruss2_mdio {
-	status = "disabled";
+&pruss2_eth1_phy {
+	reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <2>;   /* PHY datasheet states 1uS min */
 };
diff --git a/arch/arm/boot/dts/ti/omap/am574x-idk.dts b/arch/arm/boot/dts/ti/omap/am574x-idk.dts
index 47b9174d2353..47b6c6cb210c 100644
--- a/arch/arm/boot/dts/ti/omap/am574x-idk.dts
+++ b/arch/arm/boot/dts/ti/omap/am574x-idk.dts
@@ -40,10 +40,12 @@ &emif1 {
 	status = "okay";
 };
 
-&pruss1_mdio {
-	status = "disabled";
+&pruss2_eth0_phy {
+	reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <2>;   /* PHY datasheet states 1uS min */
 };
 
-&pruss2_mdio {
-	status = "disabled";
+&pruss2_eth1_phy {
+	reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	reset-assert-us = <2>;   /* PHY datasheet states 1uS min */
 };
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi
index 43e3623f079c..5eccff3bb4b6 100644
--- a/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-idk-common.dtsi
@@ -155,6 +155,52 @@ src_clk_x1: src_clk_x1 {
 		compatible = "fixed-clock";
 		clock-frequency = <20000000>;
 	};
+
+	/* Dual-MAC Ethernet application node on PRU-ICSS2 */
+	pruss2_eth: pruss2-eth {
+		compatible = "ti,am57-prueth";
+		ti,prus = <&pru2_0>, <&pru2_1>;
+		sram = <&ocmcram1>;
+		ti,mii-rt = <&pruss2_mii_rt>;
+		ti,iep = <&pruss2_iep>;
+		ti,ecap = <&pruss2_ecap>;
+		interrupts = <20 2 2>, <21 3 3>;
+		interrupt-names = "rx_hp", "rx_lp";
+		interrupt-parent = <&pruss2_intc>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pruss2_emac0: ethernet-port@0 {
+				reg = <0>;
+				phy-handle = <&pruss2_eth0_phy>;
+				phy-mode = "mii";
+				interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
+				interrupt-names = "rx", "emac_ptp_tx",
+						  "hsr_ptp_tx";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			pruss2_emac1: ethernet-port@1 {
+				reg = <1>;
+				phy-handle = <&pruss2_eth1_phy>;
+				phy-mode = "mii";
+				interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
+				interrupt-names = "rx", "emac_ptp_tx",
+						  "hsr_ptp_tx";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+};
+
+&pruss2_iep {
+	interrupt-parent = <&pruss2_intc>;
+	interrupts = <7 7 8>;
+	interrupt-names = "iep_cap_cmp";
 };
 
 &dra7_pmx_core {
@@ -606,3 +652,18 @@ dpi_out: endpoint {
 		};
 	};
 };
+
+&pruss2_mdio {
+	status = "okay";
+	pruss2_eth0_phy: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pruss2_eth1_phy: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};