From c2a16269742e176fccdd0ef9c016a233491a49ad Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Thu, 11 Dec 2025 10:37:35 +0800 Subject: [PATCH 1/3] net: hns3: using the num_tqps in the vf driver to apply for resources Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller than hdev->num_tqps, which causes some hdev->htqp[i] to remain uninitialized in hclgevf_knic_setup(). Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps, ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent and that all elements are properly initialized. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Link: https://patch.msgid.link/20251211023737.2327018-2-shaojijie@huawei.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 8fcf220a120d..70327a73dee3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -368,12 +368,12 @@ static int hclgevf_knic_setup(struct hclgevf_dev *hdev) new_tqps = kinfo->rss_size * num_tc; kinfo->num_tqps = min(new_tqps, hdev->num_tqps); - kinfo->tqp = devm_kcalloc(&hdev->pdev->dev, kinfo->num_tqps, + kinfo->tqp = devm_kcalloc(&hdev->pdev->dev, hdev->num_tqps, sizeof(struct hnae3_queue *), GFP_KERNEL); if (!kinfo->tqp) return -ENOMEM; - for (i = 0; i < kinfo->num_tqps; i++) { + for (i = 0; i < hdev->num_tqps; i++) { hdev->htqp[i].q.handle = &hdev->nic; hdev->htqp[i].q.tqp_index = i; kinfo->tqp[i] = &hdev->htqp[i].q; From d180c11aa8a6fa735f9ac2c72c61364a9afc2ba7 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Thu, 11 Dec 2025 10:37:36 +0800 Subject: [PATCH 2/3] net: hns3: using the num_tqps to check whether tqp_index is out of range when vf get ring info from mbx Currently, rss_size = num_tqps / tc_num. If tc_num is 1, then num_tqps equals rss_size. However, if the tc_num is greater than 1, then rss_size will be less than num_tqps, causing the tqp_index check for subsequent TCs using rss_size to always fail. This patch uses the num_tqps to check whether tqp_index is out of range, instead of rss_size. Fixes: 326334aad024 ("net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()") Signed-off-by: Jian Shen Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Link: https://patch.msgid.link/20251211023737.2327018-3-shaojijie@huawei.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index c7ff12a6c076..b7d4e06a55d4 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -193,10 +193,10 @@ static int hclge_get_ring_chain_from_mbx( return -EINVAL; for (i = 0; i < ring_num; i++) { - if (req->msg.param[i].tqp_index >= vport->nic.kinfo.rss_size) { + if (req->msg.param[i].tqp_index >= vport->nic.kinfo.num_tqps) { dev_err(&hdev->pdev->dev, "tqp index(%u) is out of range(0-%u)\n", req->msg.param[i].tqp_index, - vport->nic.kinfo.rss_size - 1U); + vport->nic.kinfo.num_tqps - 1U); return -EINVAL; } } From 6ef935e65902bfed53980ad2754b06a284ea8ac1 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Thu, 11 Dec 2025 10:37:37 +0800 Subject: [PATCH 3/3] net: hns3: add VLAN id validation before using Currently, the VLAN id may be used without validation when receive a VLAN configuration mailbox from VF. The length of vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause out-of-bounds memory access once the VLAN id is bigger than or equal to VLAN_N_VID. Therefore, VLAN id needs to be checked to ensure it is within the range of VLAN_N_VID. Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Jian Shen Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Link: https://patch.msgid.link/20251211023737.2327018-4-shaojijie@huawei.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index cf8abbe01840..c589baea7c77 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -10555,6 +10555,9 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto, bool writen_to_tbl = false; int ret = 0; + if (vlan_id >= VLAN_N_VID) + return -EINVAL; + /* When device is resetting or reset failed, firmware is unable to * handle mailbox. Just record the vlan id, and remove it after * reset finished.