From f7a3b40baf77721601d97b9e1cd55dec36f8ff87 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Tue, 5 Nov 2019 13:52:18 +0100 Subject: [PATCH 01/37] ARM: dts: stm32: add pwm sleep pin muxing for stm32mp157c-ev1 Add PWM pinctrl definitions used in low-power (sleep) mode on stm32mp157c-ev1. Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 3d1ecb408b03..144632811015 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -596,6 +596,12 @@ pins { }; }; + pwm2_sleep_pins_a: pwm2-sleep-0 { + pins { + pinmux = ; /* TIM2_CH4 */ + }; + }; + pwm8_pins_a: pwm8-0 { pins { pinmux = ; /* TIM8_CH4 */ @@ -605,6 +611,12 @@ pins { }; }; + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = ; /* TIM8_CH4 */ + }; + }; + pwm12_pins_a: pwm12-0 { pins { pinmux = ; /* TIM12_CH1 */ @@ -614,6 +626,12 @@ pins { }; }; + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = ; /* TIM12_CH1 */ + }; + }; + qspi_clk_pins_a: qspi-clk-0 { pins { pinmux = ; /* QSPI_CLK */ From 1e381a657a1ff29130a9dfb8ee166226a6afaf52 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Tue, 5 Nov 2019 13:52:19 +0100 Subject: [PATCH 02/37] ARM: dts: stm32: add pwm pin muxing for stm32mp157a-dk1 Add all PWM pinctrl definitions that can be used on stm32mp157a-dk1 board. Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 81 +++++++++++++++++++++++ 1 file changed, 81 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 144632811015..e3a9e3a2f1a8 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -587,6 +587,25 @@ pins { }; }; + pwm1_pins_a: pwm1-0 { + pins { + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH2 */ + ; /* TIM1_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH2 */ + ; /* TIM1_CH4 */ + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = ; /* TIM2_CH4 */ @@ -602,6 +621,68 @@ pins { }; }; + pwm3_pins_a: pwm3-0 { + pins { + pinmux = ; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = ; /* TIM3_CH2 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = , /* TIM4_CH3 */ + ; /* TIM4_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = , /* TIM4_CH3 */ + ; /* TIM4_CH4 */ + }; + }; + + pwm4_pins_b: pwm4-1 { + pins { + pinmux = ; /* TIM4_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_b: pwm4-sleep-1 { + pins { + pinmux = ; /* TIM4_CH2 */ + }; + }; + + pwm5_pins_a: pwm5-0 { + pins { + pinmux = ; /* TIM5_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = ; /* TIM5_CH2 */ + }; + }; + pwm8_pins_a: pwm8-0 { pins { pinmux = ; /* TIM8_CH4 */ From 08af7401504f2fe367aecda67125fcd5e2842d09 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Tue, 5 Nov 2019 13:52:20 +0100 Subject: [PATCH 03/37] ARM: dts: stm32: add pwm sleep pins to stm32mp157c-ev1 Add pinctrl sleep state for PWM on stm32mp157c-ev1 board. Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 3789312c8539..a27db4e3f1ce 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -296,7 +296,8 @@ &timers2 { status = "disabled"; pwm { pinctrl-0 = <&pwm2_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm2_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@1 { @@ -310,7 +311,8 @@ &timers8 { status = "disabled"; pwm { pinctrl-0 = <&pwm8_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm8_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@7 { @@ -324,7 +326,8 @@ &timers12 { status = "disabled"; pwm { pinctrl-0 = <&pwm12_pins_a>; - pinctrl-names = "default"; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; status = "okay"; }; timer@11 { From 4edf4c656db1a7cc4b093cf560efc74692080b39 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Tue, 5 Nov 2019 13:52:21 +0100 Subject: [PATCH 04/37] ARM: dts: stm32: add support for PWM on stm32mp157a-dk1 Add PWM support on stm32mp157a-dk1 board. There are several timers channels made available on GPIO expansion and arduino connectors: - Add PWM and trigger support (these timers can also be used as trigger for ADC). It's easier then to configure them all. But keep them disabled by default, so the pins are kept in their initial state to lower power consumption. This way they can also be used as GPIO. Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157a-dk1.dts | 85 +++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 984a47cbd13d..d4e37ab0752a 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -502,6 +502,91 @@ &sdmmc1 { status = "okay"; }; +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers6 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + timer@5 { + status = "okay"; + }; +}; + +&timers12 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + &uart4 { pinctrl-names = "default"; pinctrl-0 = <&uart4_pins_a>; From f9b9aaaa06adfe97985cc9f0abc3f5409e2e2929 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Wed, 6 Nov 2019 10:11:24 +0100 Subject: [PATCH 05/37] ARM: dts: stm32: add timers counter support on stm32mp157c Add counter support on stm32mp157c that provides quadrature encoder on timers 1, 2, 3, 4, 5 and 8. Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index ed8b258256d7..901db8a4abf4 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -148,6 +148,11 @@ timer@1 { reg = <1>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers3: timer@40001000 { @@ -177,6 +182,11 @@ timer@2 { reg = <2>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers4: timer@40002000 { @@ -204,6 +214,11 @@ timer@3 { reg = <3>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers5: timer@40003000 { @@ -233,6 +248,11 @@ timer@4 { reg = <4>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers6: timer@40004000 { @@ -589,6 +609,11 @@ timer@0 { reg = <0>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; timers8: timer@44001000 { @@ -620,6 +645,11 @@ timer@7 { reg = <7>; status = "disabled"; }; + + counter { + compatible = "st,stm32-timer-counter"; + status = "disabled"; + }; }; usart6: serial@44003000 { From 0a1732cf6cdcd347528ff1e2ac31fa7b51427f06 Mon Sep 17 00:00:00 2001 From: Yann Gautier Date: Wed, 6 Nov 2019 11:09:35 +0100 Subject: [PATCH 06/37] ARM: dts: stm32: update slew-rate properties for sdmmc1 on stm32mp157 Relax sdmmc1 pins slew-rate to minimize peak currents. Signed-off-by: Ludovic Barre Signed-off-by: Yann Gautier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 28 +++++++++++++++-------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index e3a9e3a2f1a8..e186b8499a2b 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -858,14 +858,19 @@ pins { }; sdmmc1_b4_pins_a: sdmmc1-b4-0 { - pins { + pins1 { pinmux = , /* SDMMC1_D0 */ , /* SDMMC1_D1 */ , /* SDMMC1_D2 */ , /* SDMMC1_D3 */ - , /* SDMMC1_CK */ ; /* SDMMC1_CMD */ - slew-rate = <3>; + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; drive-push-pull; bias-disable; }; @@ -876,15 +881,20 @@ pins1 { pinmux = , /* SDMMC1_D0 */ , /* SDMMC1_D1 */ , /* SDMMC1_D2 */ - , /* SDMMC1_D3 */ - ; /* SDMMC1_CK */ - slew-rate = <3>; + ; /* SDMMC1_D3 */ + slew-rate = <1>; drive-push-pull; bias-disable; }; - pins2{ + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { pinmux = ; /* SDMMC1_CMD */ - slew-rate = <3>; + slew-rate = <1>; drive-open-drain; bias-disable; }; @@ -906,7 +916,7 @@ pins1 { pinmux = , /* SDMMC1_D0DIR */ , /* SDMMC1_D123DIR */ ; /* SDMMC1_CDIR */ - slew-rate = <3>; + slew-rate = <1>; drive-push-pull; bias-pull-up; }; From 64e11cb783d120d0a76cf89dbe4471ba98db0d8a Mon Sep 17 00:00:00 2001 From: Yann Gautier Date: Wed, 6 Nov 2019 11:09:36 +0100 Subject: [PATCH 07/37] ARM: dts: stm32: add sdmmc2 & 3 nodes for STM32MP157 SoC The STM32MP157 SoC series includes 3 instances of the SDMMC peripheral. The sdmmc2 and sdmmc3 nodes are added in STM32MP157 SoC DT file. Signed-off-by: Ludovic Barre Signed-off-by: Yann Gautier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c.dtsi | 33 +++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 901db8a4abf4..d3a9791a0fda 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -1060,6 +1060,21 @@ adc2: adc@100 { }; }; + sdmmc3: sdmmc@48004000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x48004000 0x400>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC3_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC3_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + usbotg_hs: usb-otg@49000000 { compatible = "snps,dwc2"; reg = <0x49000000 0x10000>; @@ -1348,13 +1363,29 @@ sdmmc1: sdmmc@58005000 { arm,primecell-periphid = <0x10153180>; reg = <0x58005000 0x1000>; interrupts = ; - interrupt-names = "cmd_irq"; + interrupt-names = "cmd_irq"; clocks = <&rcc SDMMC1_K>; clock-names = "apb_pclk"; resets = <&rcc SDMMC1_R>; cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <120000000>; + status = "disabled"; + }; + + sdmmc2: sdmmc@58007000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x58007000 0x1000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC2_K>; + clock-names = "apb_pclk"; + resets = <&rcc SDMMC2_R>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; }; crc1: crc@58009000 { From 0382bf82fe7aa050c5b3e1857e5095f76dc3ab5a Mon Sep 17 00:00:00 2001 From: Yann Gautier Date: Wed, 6 Nov 2019 11:09:37 +0100 Subject: [PATCH 08/37] ARM: dts: stm32: enable sdmmc2 node for stm32mp157c-ed1 board On STM32MP157C-ED1, the eMMC is connected on instance 2 of SDMMC peripheral. The sdmmc2 node is then added in the board DT file, as well as the pins nodes in the pinctrl file. Signed-off-by: Ludovic Barre Signed-off-by: Yann Gautier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 118 ++++++++++++++++++++++ arch/arm/boot/dts/stm32mp157c-ed1.dts | 16 +++ 2 files changed, 134 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index e186b8499a2b..bdd4113f473e 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -935,6 +935,124 @@ pins { }; }; + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + ; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + , /* SDMMC2_CK */ + ; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_b4_pins_b: sdmmc2-b4-1 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + ; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; + }; + spdifrx_pins_a: spdifrx-0 { pins { pinmux = ; /* SPDIF_IN1 */ diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index b8cc0fb0ec48..207146c98154 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -305,6 +305,22 @@ &sdmmc1 { status = "okay"; }; +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + &timers6 { status = "okay"; /* spare dmas for other usage */ From 7e5d83981911f66fd0e6c110ea6a21a4f771b924 Mon Sep 17 00:00:00 2001 From: Yann Gautier Date: Fri, 15 Nov 2019 11:44:51 +0100 Subject: [PATCH 09/37] ARM: dts: stm32: add sdmmc3 node for STM32MP1 boards On STM32MP1 EVAL and DISCOVERY boards, the SDMMC3 internal peripheral can be used through the GPIO extension connector. The sdmmc3 node is then added in the boards DT files, and the required pins are also added. The node status is disabled as there is no device connected by default. Signed-off-by: Ludovic Barre Signed-off-by: Yann Gautier --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 54 +++++++++++++++++++++++ arch/arm/boot/dts/stm32mp157a-dk1.dts | 12 +++++ arch/arm/boot/dts/stm32mp157c-ev1.dts | 12 +++++ 3 files changed, 78 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index bdd4113f473e..2b6d4474faef 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -1053,6 +1053,60 @@ pins { }; }; + sdmmc3_b4_pins_a: sdmmc3-b4-0 { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + ; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + ; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { + pins { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + , /* SDMMC3_CK */ + ; /* SDMMC3_CMD */ + }; + }; + spdifrx_pins_a: spdifrx-0 { pins { pinmux = ; /* SPDIF_IN1 */ diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index d4e37ab0752a..2f9f8cf94b02 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -502,6 +502,18 @@ &sdmmc1 { status = "okay"; }; +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + &timers1 { /* spare dmas for other usage */ /delete-property/dmas; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index a27db4e3f1ce..2010f6292a77 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -283,6 +283,18 @@ flash1: mx66l51235l@1 { }; }; +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + &spi1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_pins_a>; From ee39d8a3e4c8317986abdd1bd0c57a25dd3802a8 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 8 Nov 2019 17:37:38 +0100 Subject: [PATCH 10/37] ARM: dts: stm32: add ADC pins used for stm32mp157c-ed1 Define adc1_in6 pin used on stm32mp157c eval board. Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 2b6d4474faef..e8dfed4b6ade 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -137,6 +137,12 @@ gpiok: gpio@5000c000 { status = "disabled"; }; + adc1_in6_pins_a: adc1-in6 { + pins { + pinmux = ; + }; + }; + adc12_ain_pins_a: adc12-ain-0 { pins { pinmux = , /* ADC1 in13 */ From 91ad4af4b29709462a2185c770ac1de9bd2e2c09 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 8 Nov 2019 17:37:39 +0100 Subject: [PATCH 11/37] ARM: dts: stm32: add ADC support to stm32mp157c-ed1 Add ADC support to stm32mp157c-ed1 board. Following ADC signals are dedicated for analog and routed to connectors: - ADC1/2 in0 (ANA0) - ADC1/2 in1 (ANA1) - ADC1 in6 (PF12) Configure ADC1 with these signals. But keep it disabled by default, so PF12 can be used as gpio by default. Add VDD and VDDA supplies to ADC on stm32mp157c-ed1 board. This allows to get full ADC analog performances in case VDDA is below 2.7V (not the case by default). Signed-off-by: Fabrice Gasnier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ed1.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 207146c98154..341fb6064447 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -89,6 +89,22 @@ sd_switch: regulator-sd_switch { }; }; +&adc { + /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + pinctrl-0 = <&adc1_in6_pins_a>; + pinctrl-names = "default"; + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "disabled"; + adc1: adc@0 { + st,adc-channels = <0 1 6>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-nsecs = <400>; + status = "okay"; + }; +}; + &dac { pinctrl-names = "default"; pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; From ac4533a816e06cb630d2f9c9b83e246c06fdef66 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 15 Nov 2019 11:06:51 +0100 Subject: [PATCH 12/37] ARM: dts: stm32: remove unused rng interrupt on stm32f429 Interrupt has never be used in rng driver so remove it from DT. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 5c8a826b3195..196817da0c1d 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -789,7 +789,6 @@ dcmi: dcmi@50050000 { rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; - interrupts = <80>; clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>; }; From 92d3a35c07251d060b163f19ca61b3702c7126ff Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Mon, 18 Nov 2019 17:44:13 +0100 Subject: [PATCH 13/37] ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs family This commit modifies stm32mp157 pinctrl files to better manage STM32MP15xx SOCs diversity. Pin controller and gpio controller are moved to common SOC dtsi file. Only pin groups remain in the main pinctrl dtsi file. Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 2289 ++++++++++----------- arch/arm/boot/dts/stm32mp157c.dtsi | 157 ++ 2 files changed, 1225 insertions(+), 1221 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index e8dfed4b6ade..14e0ee82d94d 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -5,1236 +5,1083 @@ */ #include -/ { - soc { - pinctrl: pin-controller@50002000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-pinctrl"; - ranges = <0 0x50002000 0xa400>; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - pins-are-numbered; - - gpioa: gpio@50002000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc GPIOA>; - st,bank-name = "GPIOA"; - status = "disabled"; - }; - - gpiob: gpio@50003000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc GPIOB>; - st,bank-name = "GPIOB"; - status = "disabled"; - }; - - gpioc: gpio@50004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc GPIOC>; - st,bank-name = "GPIOC"; - status = "disabled"; - }; - - gpiod: gpio@50005000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x400>; - clocks = <&rcc GPIOD>; - st,bank-name = "GPIOD"; - status = "disabled"; - }; - - gpioe: gpio@50006000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x400>; - clocks = <&rcc GPIOE>; - st,bank-name = "GPIOE"; - status = "disabled"; - }; - - gpiof: gpio@50007000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x400>; - clocks = <&rcc GPIOF>; - st,bank-name = "GPIOF"; - status = "disabled"; - }; - - gpiog: gpio@50008000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x400>; - clocks = <&rcc GPIOG>; - st,bank-name = "GPIOG"; - status = "disabled"; - }; - - gpioh: gpio@50009000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x400>; - clocks = <&rcc GPIOH>; - st,bank-name = "GPIOH"; - status = "disabled"; - }; - - gpioi: gpio@5000a000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x8000 0x400>; - clocks = <&rcc GPIOI>; - st,bank-name = "GPIOI"; - status = "disabled"; - }; - - gpioj: gpio@5000b000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x9000 0x400>; - clocks = <&rcc GPIOJ>; - st,bank-name = "GPIOJ"; - status = "disabled"; - }; - - gpiok: gpio@5000c000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xa000 0x400>; - clocks = <&rcc GPIOK>; - st,bank-name = "GPIOK"; - status = "disabled"; - }; - - adc1_in6_pins_a: adc1-in6 { - pins { - pinmux = ; - }; - }; - - adc12_ain_pins_a: adc12-ain-0 { - pins { - pinmux = , /* ADC1 in13 */ - , /* ADC1 in6 */ - , /* ADC2 in2 */ - ; /* ADC2 in6 */ - }; - }; - - adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { - pins { - pinmux = , /* ADC12 in18 */ - ; /* ADC12 in19 */ - }; - }; - - cec_pins_a: cec-0 { - pins { - pinmux = ; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_a: cec-sleep-0 { - pins { - pinmux = ; /* HDMI_CEC */ - }; - }; - - cec_pins_b: cec-1 { - pins { - pinmux = ; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_b: cec-sleep-1 { - pins { - pinmux = ; /* HDMI_CEC */ - }; - }; - - dac_ch1_pins_a: dac-ch1 { - pins { - pinmux = ; - }; - }; - - dac_ch2_pins_a: dac-ch2 { - pins { - pinmux = ; - }; - }; - - dcmi_pins_a: dcmi-0 { - pins { - pinmux = ,/* DCMI_HSYNC */ - ,/* DCMI_VSYNC */ - ,/* DCMI_PIXCLK */ - ,/* DCMI_D0 */ - ,/* DCMI_D1 */ - ,/* DCMI_D2 */ - ,/* DCMI_D3 */ - ,/* DCMI_D4 */ - ,/* DCMI_D5 */ - ,/* DCMI_D6 */ - ,/* DCMI_D7 */ - ,/* DCMI_D8 */ - ,/* DCMI_D9 */ - ,/* DCMI_D10 */ - ;/* DCMI_D11 */ - bias-disable; - }; - }; - - dcmi_sleep_pins_a: dcmi-sleep-0 { - pins { - pinmux = ,/* DCMI_HSYNC */ - ,/* DCMI_VSYNC */ - ,/* DCMI_PIXCLK */ - ,/* DCMI_D0 */ - ,/* DCMI_D1 */ - ,/* DCMI_D2 */ - ,/* DCMI_D3 */ - ,/* DCMI_D4 */ - ,/* DCMI_D5 */ - ,/* DCMI_D6 */ - ,/* DCMI_D7 */ - ,/* DCMI_D8 */ - ,/* DCMI_D9 */ - ,/* DCMI_D10 */ - ;/* DCMI_D11 */ - }; - }; - - ethernet0_rgmii_pins_a: rgmii-0 { - pins1 { - pinmux = , /* ETH_RGMII_CLK125 */ - , /* ETH_RGMII_GTX_CLK */ - , /* ETH_RGMII_TXD0 */ - , /* ETH_RGMII_TXD1 */ - , /* ETH_RGMII_TXD2 */ - , /* ETH_RGMII_TXD3 */ - , /* ETH_RGMII_TX_CTL */ - , /* ETH_MDIO */ - ; /* ETH_MDC */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - pins2 { - pinmux = , /* ETH_RGMII_RXD0 */ - , /* ETH_RGMII_RXD1 */ - , /* ETH_RGMII_RXD2 */ - , /* ETH_RGMII_RXD3 */ - , /* ETH_RGMII_RX_CLK */ - ; /* ETH_RGMII_RX_CTL */ - bias-disable; - }; - }; - - ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { - pins1 { - pinmux = , /* ETH_RGMII_CLK125 */ - , /* ETH_RGMII_GTX_CLK */ - , /* ETH_RGMII_TXD0 */ - , /* ETH_RGMII_TXD1 */ - , /* ETH_RGMII_TXD2 */ - , /* ETH_RGMII_TXD3 */ - , /* ETH_RGMII_TX_CTL */ - , /* ETH_MDIO */ - , /* ETH_MDC */ - , /* ETH_RGMII_RXD0 */ - , /* ETH_RGMII_RXD1 */ - , /* ETH_RGMII_RXD2 */ - , /* ETH_RGMII_RXD3 */ - , /* ETH_RGMII_RX_CLK */ - ; /* ETH_RGMII_RX_CTL */ - }; - }; - - fmc_pins_a: fmc-0 { - pins1 { - pinmux = , /* FMC_NOE */ - , /* FMC_NWE */ - , /* FMC_A16_FMC_CLE */ - , /* FMC_A17_FMC_ALE */ - , /* FMC_D0 */ - , /* FMC_D1 */ - , /* FMC_D2 */ - , /* FMC_D3 */ - , /* FMC_D4 */ - , /* FMC_D5 */ - , /* FMC_D6 */ - , /* FMC_D7 */ - ; /* FMC_NE2_FMC_NCE */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = ; /* FMC_NWAIT */ - bias-pull-up; - }; - }; - - fmc_sleep_pins_a: fmc-sleep-0 { - pins { - pinmux = , /* FMC_NOE */ - , /* FMC_NWE */ - , /* FMC_A16_FMC_CLE */ - , /* FMC_A17_FMC_ALE */ - , /* FMC_D0 */ - , /* FMC_D1 */ - , /* FMC_D2 */ - , /* FMC_D3 */ - , /* FMC_D4 */ - , /* FMC_D5 */ - , /* FMC_D6 */ - , /* FMC_D7 */ - , /* FMC_NWAIT */ - ; /* FMC_NE2_FMC_NCE */ - }; - }; - - i2c1_pins_a: i2c1-0 { - pins { - pinmux = , /* I2C1_SCL */ - ; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_a: i2c1-1 { - pins { - pinmux = , /* I2C1_SCL */ - ; /* I2C1_SDA */ - }; - }; - - i2c1_pins_b: i2c1-2 { - pins { - pinmux = , /* I2C1_SCL */ - ; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_b: i2c1-3 { - pins { - pinmux = , /* I2C1_SCL */ - ; /* I2C1_SDA */ - }; - }; - - i2c2_pins_a: i2c2-0 { - pins { - pinmux = , /* I2C2_SCL */ - ; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_a: i2c2-1 { - pins { - pinmux = , /* I2C2_SCL */ - ; /* I2C2_SDA */ - }; - }; - - i2c2_pins_b1: i2c2-2 { - pins { - pinmux = ; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b1: i2c2-3 { - pins { - pinmux = ; /* I2C2_SDA */ - }; - }; - - i2c5_pins_a: i2c5-0 { - pins { - pinmux = , /* I2C5_SCL */ - ; /* I2C5_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c5_pins_sleep_a: i2c5-1 { - pins { - pinmux = , /* I2C5_SCL */ - ; /* I2C5_SDA */ - - }; - }; - - i2s2_pins_a: i2s2-0 { - pins { - pinmux = , /* I2S2_SDO */ - , /* I2S2_WS */ - ; /* I2S2_CK */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - }; - - i2s2_pins_sleep_a: i2s2-1 { - pins { - pinmux = , /* I2S2_SDO */ - , /* I2S2_WS */ - ; /* I2S2_CK */ - }; - }; - - ltdc_pins_a: ltdc-a-0 { - pins { - pinmux = , /* LCD_CLK */ - , /* LCD_HSYNC */ - , /* LCD_VSYNC */ - , /* LCD_DE */ - , /* LCD_R0 */ - , /* LCD_R1 */ - , /* LCD_R2 */ - , /* LCD_R3 */ - , /* LCD_R4 */ - , /* LCD_R5 */ - , /* LCD_R6 */ - , /* LCD_R7 */ - , /* LCD_G0 */ - , /* LCD_G1 */ - , /* LCD_G2 */ - , /* LCD_G3 */ - , /* LCD_G4 */ - , /* LCD_G5 */ - , /* LCD_G6 */ - , /* LCD_G7 */ - , /* LCD_B0 */ - , /* LCD_B1 */ - , /* LCD_B2 */ - , /* LCD_B3 */ - , /* LCD_B4 */ - , /* LCD_B5 */ - , /* LCD_B6 */ - ; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_a: ltdc-a-1 { - pins { - pinmux = , /* LCD_CLK */ - , /* LCD_HSYNC */ - , /* LCD_VSYNC */ - , /* LCD_DE */ - , /* LCD_R0 */ - , /* LCD_R1 */ - , /* LCD_R2 */ - , /* LCD_R3 */ - , /* LCD_R4 */ - , /* LCD_R5 */ - , /* LCD_R6 */ - , /* LCD_R7 */ - , /* LCD_G0 */ - , /* LCD_G1 */ - , /* LCD_G2 */ - , /* LCD_G3 */ - , /* LCD_G4 */ - , /* LCD_G5 */ - , /* LCD_G6 */ - , /* LCD_G7 */ - , /* LCD_B0 */ - , /* LCD_B1 */ - , /* LCD_B2 */ - , /* LCD_B3 */ - , /* LCD_B4 */ - , /* LCD_B5 */ - , /* LCD_B6 */ - ; /* LCD_B7 */ - }; - }; - - ltdc_pins_b: ltdc-b-0 { - pins { - pinmux = , /* LCD_CLK */ - , /* LCD_HSYNC */ - , /* LCD_VSYNC */ - , /* LCD_DE */ - , /* LCD_R0 */ - , /* LCD_R1 */ - , /* LCD_R2 */ - , /* LCD_R3 */ - , /* LCD_R4 */ - , /* LCD_R5 */ - , /* LCD_R6 */ - , /* LCD_R7 */ - , /* LCD_G0 */ - , /* LCD_G1 */ - , /* LCD_G2 */ - , /* LCD_G3 */ - , /* LCD_G4 */ - , /* LCD_G5 */ - , /* LCD_G6 */ - , /* LCD_G7 */ - , /* LCD_B0 */ - , /* LCD_B1 */ - , /* LCD_B2 */ - , /* LCD_B3 */ - , /* LCD_B4 */ - , /* LCD_B5 */ - , /* LCD_B6 */ - ; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_b: ltdc-b-1 { - pins { - pinmux = , /* LCD_CLK */ - , /* LCD_HSYNC */ - , /* LCD_VSYNC */ - , /* LCD_DE */ - , /* LCD_R0 */ - , /* LCD_R1 */ - , /* LCD_R2 */ - , /* LCD_R3 */ - , /* LCD_R4 */ - , /* LCD_R5 */ - , /* LCD_R6 */ - , /* LCD_R7 */ - , /* LCD_G0 */ - , /* LCD_G1 */ - , /* LCD_G2 */ - , /* LCD_G3 */ - , /* LCD_G4 */ - , /* LCD_G5 */ - , /* LCD_G6 */ - , /* LCD_G7 */ - , /* LCD_B0 */ - , /* LCD_B1 */ - , /* LCD_B2 */ - , /* LCD_B3 */ - , /* LCD_B4 */ - , /* LCD_B5 */ - , /* LCD_B6 */ - ; /* LCD_B7 */ - }; - }; - - m_can1_pins_a: m-can1-0 { - pins1 { - pinmux = ; /* CAN1_TX */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = ; /* CAN1_RX */ - bias-disable; - }; - }; - - m_can1_sleep_pins_a: m_can1-sleep-0 { - pins { - pinmux = , /* CAN1_TX */ - ; /* CAN1_RX */ - }; - }; - - pwm1_pins_a: pwm1-0 { - pins { - pinmux = , /* TIM1_CH1 */ - , /* TIM1_CH2 */ - ; /* TIM1_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm1_sleep_pins_a: pwm1-sleep-0 { - pins { - pinmux = , /* TIM1_CH1 */ - , /* TIM1_CH2 */ - ; /* TIM1_CH4 */ - }; - }; - - pwm2_pins_a: pwm2-0 { - pins { - pinmux = ; /* TIM2_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm2_sleep_pins_a: pwm2-sleep-0 { - pins { - pinmux = ; /* TIM2_CH4 */ - }; - }; - - pwm3_pins_a: pwm3-0 { - pins { - pinmux = ; /* TIM3_CH2 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm3_sleep_pins_a: pwm3-sleep-0 { - pins { - pinmux = ; /* TIM3_CH2 */ - }; - }; - - pwm4_pins_a: pwm4-0 { - pins { - pinmux = , /* TIM4_CH3 */ - ; /* TIM4_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm4_sleep_pins_a: pwm4-sleep-0 { - pins { - pinmux = , /* TIM4_CH3 */ - ; /* TIM4_CH4 */ - }; - }; - - pwm4_pins_b: pwm4-1 { - pins { - pinmux = ; /* TIM4_CH2 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm4_sleep_pins_b: pwm4-sleep-1 { - pins { - pinmux = ; /* TIM4_CH2 */ - }; - }; - - pwm5_pins_a: pwm5-0 { - pins { - pinmux = ; /* TIM5_CH2 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm5_sleep_pins_a: pwm5-sleep-0 { - pins { - pinmux = ; /* TIM5_CH2 */ - }; - }; - - pwm8_pins_a: pwm8-0 { - pins { - pinmux = ; /* TIM8_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm8_sleep_pins_a: pwm8-sleep-0 { - pins { - pinmux = ; /* TIM8_CH4 */ - }; - }; - - pwm12_pins_a: pwm12-0 { - pins { - pinmux = ; /* TIM12_CH1 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm12_sleep_pins_a: pwm12-sleep-0 { - pins { - pinmux = ; /* TIM12_CH1 */ - }; - }; - - qspi_clk_pins_a: qspi-clk-0 { - pins { - pinmux = ; /* QSPI_CLK */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - }; - - qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { - pins { - pinmux = ; /* QSPI_CLK */ - }; - }; - - qspi_bk1_pins_a: qspi-bk1-0 { - pins1 { - pinmux = , /* QSPI_BK1_IO0 */ - , /* QSPI_BK1_IO1 */ - , /* QSPI_BK1_IO2 */ - ; /* QSPI_BK1_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = ; /* QSPI_BK1_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; - }; - - qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { - pins { - pinmux = , /* QSPI_BK1_IO0 */ - , /* QSPI_BK1_IO1 */ - , /* QSPI_BK1_IO2 */ - , /* QSPI_BK1_IO3 */ - ; /* QSPI_BK1_NCS */ - }; - }; - - qspi_bk2_pins_a: qspi-bk2-0 { - pins1 { - pinmux = , /* QSPI_BK2_IO0 */ - , /* QSPI_BK2_IO1 */ - , /* QSPI_BK2_IO2 */ - ; /* QSPI_BK2_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = ; /* QSPI_BK2_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; - }; - - qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { - pins { - pinmux = , /* QSPI_BK2_IO0 */ - , /* QSPI_BK2_IO1 */ - , /* QSPI_BK2_IO2 */ - , /* QSPI_BK2_IO3 */ - ; /* QSPI_BK2_NCS */ - }; - }; - - sai2a_pins_a: sai2a-0 { - pins { - pinmux = , /* SAI2_SCK_A */ - , /* SAI2_SD_A */ - , /* SAI2_FS_A */ - ; /* SAI2_MCLK_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai2a_sleep_pins_a: sai2a-1 { - pins { - pinmux = , /* SAI2_SCK_A */ - , /* SAI2_SD_A */ - , /* SAI2_FS_A */ - ; /* SAI2_MCLK_A */ - }; - }; - - sai2b_pins_a: sai2b-0 { - pins1 { - pinmux = , /* SAI2_SCK_B */ - , /* SAI2_FS_B */ - ; /* SAI2_MCLK_B */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = ; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_a: sai2b-1 { - pins { - pinmux = , /* SAI2_SD_B */ - , /* SAI2_SCK_B */ - , /* SAI2_FS_B */ - ; /* SAI2_MCLK_B */ - }; - }; - - sai2b_pins_b: sai2b-2 { - pins { - pinmux = ; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_b: sai2b-3 { - pins { - pinmux = ; /* SAI2_SD_B */ - }; - }; - - sai4a_pins_a: sai4a-0 { - pins { - pinmux = ; /* SAI4_SD_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai4a_sleep_pins_a: sai4a-1 { - pins { - pinmux = ; /* SAI4_SD_A */ - }; - }; - - sdmmc1_b4_pins_a: sdmmc1-b4-0 { - pins1 { - pinmux = , /* SDMMC1_D0 */ - , /* SDMMC1_D1 */ - , /* SDMMC1_D2 */ - , /* SDMMC1_D3 */ - ; /* SDMMC1_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = ; /* SDMMC1_CK */ - slew-rate = <2>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { - pins1 { - pinmux = , /* SDMMC1_D0 */ - , /* SDMMC1_D1 */ - , /* SDMMC1_D2 */ - ; /* SDMMC1_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = ; /* SDMMC1_CK */ - slew-rate = <2>; - drive-push-pull; - bias-disable; - }; - pins3 { - pinmux = ; /* SDMMC1_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { - pins { - pinmux = , /* SDMMC1_D0 */ - , /* SDMMC1_D1 */ - , /* SDMMC1_D2 */ - , /* SDMMC1_D3 */ - , /* SDMMC1_CK */ - ; /* SDMMC1_CMD */ - }; - }; - - sdmmc1_dir_pins_a: sdmmc1-dir-0 { - pins1 { - pinmux = , /* SDMMC1_D0DIR */ - , /* SDMMC1_D123DIR */ - ; /* SDMMC1_CDIR */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2{ - pinmux = ; /* SDMMC1_CKIN */ - bias-pull-up; - }; - }; - - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { - pins { - pinmux = , /* SDMMC1_D0DIR */ - , /* SDMMC1_D123DIR */ - , /* SDMMC1_CDIR */ - ; /* SDMMC1_CKIN */ - }; - }; - - sdmmc2_b4_pins_a: sdmmc2-b4-0 { - pins1 { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - , /* SDMMC2_D3 */ - ; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = ; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { - pins1 { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - ; /* SDMMC2_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = ; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - pins3 { - pinmux = ; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-pull-up; - }; - }; - - sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { - pins { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - , /* SDMMC2_D3 */ - , /* SDMMC2_CK */ - ; /* SDMMC2_CMD */ - }; - }; - - sdmmc2_b4_pins_b: sdmmc2-b4-1 { - pins1 { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - , /* SDMMC2_D3 */ - ; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = ; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { - pins1 { - pinmux = , /* SDMMC2_D0 */ - , /* SDMMC2_D1 */ - , /* SDMMC2_D2 */ - ; /* SDMMC2_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = ; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-disable; - }; - pins3 { - pinmux = ; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc2_d47_pins_a: sdmmc2-d47-0 { - pins { - pinmux = , /* SDMMC2_D4 */ - , /* SDMMC2_D5 */ - , /* SDMMC2_D6 */ - ; /* SDMMC2_D7 */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { - pins { - pinmux = , /* SDMMC2_D4 */ - , /* SDMMC2_D5 */ - , /* SDMMC2_D6 */ - ; /* SDMMC2_D7 */ - }; - }; - - sdmmc3_b4_pins_a: sdmmc3-b4-0 { - pins1 { - pinmux = , /* SDMMC3_D0 */ - , /* SDMMC3_D1 */ - , /* SDMMC3_D2 */ - , /* SDMMC3_D3 */ - ; /* SDMMC3_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = ; /* SDMMC3_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { - pins1 { - pinmux = , /* SDMMC3_D0 */ - , /* SDMMC3_D1 */ - , /* SDMMC3_D2 */ - ; /* SDMMC3_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = ; /* SDMMC3_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - pins3 { - pinmux = ; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-pull-up; - }; - }; - - sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { - pins { - pinmux = , /* SDMMC3_D0 */ - , /* SDMMC3_D1 */ - , /* SDMMC3_D2 */ - , /* SDMMC3_D3 */ - , /* SDMMC3_CK */ - ; /* SDMMC3_CMD */ - }; - }; - - spdifrx_pins_a: spdifrx-0 { - pins { - pinmux = ; /* SPDIF_IN1 */ - bias-disable; - }; - }; - - spdifrx_sleep_pins_a: spdifrx-1 { - pins { - pinmux = ; /* SPDIF_IN1 */ - }; - }; - - uart4_pins_a: uart4-0 { - pins1 { - pinmux = ; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = ; /* UART4_RX */ - bias-disable; - }; - }; - - uart4_pins_b: uart4-1 { - pins1 { - pinmux = ; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = ; /* UART4_RX */ - bias-disable; - }; - }; - - uart7_pins_a: uart7-0 { - pins1 { - pinmux = ; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = , /* UART4_RX */ - , /* UART4_CTS */ - ; /* UART4_RTS */ - bias-disable; - }; - }; +&pinctrl { + adc1_in6_pins_a: adc1-in6 { + pins { + pinmux = ; }; + }; - pinctrl_z: pin-controller-z@54004000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-z-pinctrl"; - ranges = <0 0x54004000 0x400>; - pins-are-numbered; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = , /* ADC1 in13 */ + , /* ADC1 in6 */ + , /* ADC2 in2 */ + ; /* ADC2 in6 */ + }; + }; - gpioz: gpio@54004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x400>; - clocks = <&rcc GPIOZ>; - st,bank-name = "GPIOZ"; - st,bank-ioport = <11>; - status = "disabled"; - }; + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = , /* ADC12 in18 */ + ; /* ADC12 in19 */ + }; + }; - i2c2_pins_b2: i2c2-0 { - pins { - pinmux = ; /* I2C2_SCL */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; + cec_pins_a: cec-0 { + pins { + pinmux = ; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; - i2c2_pins_sleep_b2: i2c2-1 { - pins { - pinmux = ; /* I2C2_SCL */ - }; - }; + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = ; /* HDMI_CEC */ + }; + }; - i2c4_pins_a: i2c4-0 { - pins { - pinmux = , /* I2C4_SCL */ - ; /* I2C4_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; + cec_pins_b: cec-1 { + pins { + pinmux = ; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; - i2c4_pins_sleep_a: i2c4-1 { - pins { - pinmux = , /* I2C4_SCL */ - ; /* I2C4_SDA */ - }; - }; + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = ; /* HDMI_CEC */ + }; + }; - spi1_pins_a: spi1-0 { - pins1 { - pinmux = , /* SPI1_SCK */ - ; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = ; + }; + }; - pins2 { - pinmux = ; /* SPI1_MISO */ - bias-disable; - }; - }; + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = ; + }; + }; + + dcmi_pins_a: dcmi-0 { + pins { + pinmux = ,/* DCMI_HSYNC */ + ,/* DCMI_VSYNC */ + ,/* DCMI_PIXCLK */ + ,/* DCMI_D0 */ + ,/* DCMI_D1 */ + ,/* DCMI_D2 */ + ,/* DCMI_D3 */ + ,/* DCMI_D4 */ + ,/* DCMI_D5 */ + ,/* DCMI_D6 */ + ,/* DCMI_D7 */ + ,/* DCMI_D8 */ + ,/* DCMI_D9 */ + ,/* DCMI_D10 */ + ;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = ,/* DCMI_HSYNC */ + ,/* DCMI_VSYNC */ + ,/* DCMI_PIXCLK */ + ,/* DCMI_D0 */ + ,/* DCMI_D1 */ + ,/* DCMI_D2 */ + ,/* DCMI_D3 */ + ,/* DCMI_D4 */ + ,/* DCMI_D5 */ + ,/* DCMI_D6 */ + ,/* DCMI_D7 */ + ,/* DCMI_D8 */ + ,/* DCMI_D9 */ + ,/* DCMI_D10 */ + ;/* DCMI_D11 */ + }; + }; + + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_MDIO */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + }; + }; + + fmc_pins_a: fmc-0 { + pins1 { + pinmux = , /* FMC_NOE */ + , /* FMC_NWE */ + , /* FMC_A16_FMC_CLE */ + , /* FMC_A17_FMC_ALE */ + , /* FMC_D0 */ + , /* FMC_D1 */ + , /* FMC_D2 */ + , /* FMC_D3 */ + , /* FMC_D4 */ + , /* FMC_D5 */ + , /* FMC_D6 */ + , /* FMC_D7 */ + ; /* FMC_NE2_FMC_NCE */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* FMC_NWAIT */ + bias-pull-up; + }; + }; + + fmc_sleep_pins_a: fmc-sleep-0 { + pins { + pinmux = , /* FMC_NOE */ + , /* FMC_NWE */ + , /* FMC_A16_FMC_CLE */ + , /* FMC_A17_FMC_ALE */ + , /* FMC_D0 */ + , /* FMC_D1 */ + , /* FMC_D2 */ + , /* FMC_D3 */ + , /* FMC_D4 */ + , /* FMC_D5 */ + , /* FMC_D6 */ + , /* FMC_D7 */ + , /* FMC_NWAIT */ + ; /* FMC_NE2_FMC_NCE */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + }; + }; + + i2c1_pins_b: i2c1-2 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = , /* I2C2_SCL */ + ; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = , /* I2C2_SCL */ + ; /* I2C2_SDA */ + }; + }; + + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = ; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = ; /* I2C2_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = , /* I2C5_SCL */ + ; /* I2C5_SDA */ + + }; + }; + + i2s2_pins_a: i2s2-0 { + pins { + pinmux = , /* I2S2_SDO */ + , /* I2S2_WS */ + ; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = , /* I2S2_SDO */ + , /* I2S2_WS */ + ; /* I2S2_CK */ + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = , /* LCD_CLK */ + , /* LCD_HSYNC */ + , /* LCD_VSYNC */ + , /* LCD_DE */ + , /* LCD_R0 */ + , /* LCD_R1 */ + , /* LCD_R2 */ + , /* LCD_R3 */ + , /* LCD_R4 */ + , /* LCD_R5 */ + , /* LCD_R6 */ + , /* LCD_R7 */ + , /* LCD_G0 */ + , /* LCD_G1 */ + , /* LCD_G2 */ + , /* LCD_G3 */ + , /* LCD_G4 */ + , /* LCD_G5 */ + , /* LCD_G6 */ + , /* LCD_G7 */ + , /* LCD_B0 */ + , /* LCD_B1 */ + , /* LCD_B2 */ + , /* LCD_B3 */ + , /* LCD_B4 */ + , /* LCD_B5 */ + , /* LCD_B6 */ + ; /* LCD_B7 */ + }; + }; + + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = ; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = , /* CAN1_TX */ + ; /* CAN1_RX */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH2 */ + ; /* TIM1_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH2 */ + ; /* TIM1_CH4 */ + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = ; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm2_sleep_pins_a: pwm2-sleep-0 { + pins { + pinmux = ; /* TIM2_CH4 */ + }; + }; + + pwm3_pins_a: pwm3-0 { + pins { + pinmux = ; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = ; /* TIM3_CH2 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = , /* TIM4_CH3 */ + ; /* TIM4_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = , /* TIM4_CH3 */ + ; /* TIM4_CH4 */ + }; + }; + + pwm4_pins_b: pwm4-1 { + pins { + pinmux = ; /* TIM4_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_b: pwm4-sleep-1 { + pins { + pinmux = ; /* TIM4_CH2 */ + }; + }; + + pwm5_pins_a: pwm5-0 { + pins { + pinmux = ; /* TIM5_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = ; /* TIM5_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = ; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = ; /* TIM8_CH4 */ + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = ; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = ; /* TIM12_CH1 */ + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = ; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = ; /* QSPI_CLK */ + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = , /* QSPI_BK1_IO0 */ + , /* QSPI_BK1_IO1 */ + , /* QSPI_BK1_IO2 */ + ; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = , /* QSPI_BK1_IO0 */ + , /* QSPI_BK1_IO1 */ + , /* QSPI_BK1_IO2 */ + , /* QSPI_BK1_IO3 */ + ; /* QSPI_BK1_NCS */ + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = , /* QSPI_BK2_IO0 */ + , /* QSPI_BK2_IO1 */ + , /* QSPI_BK2_IO2 */ + ; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = , /* QSPI_BK2_IO0 */ + , /* QSPI_BK2_IO1 */ + , /* QSPI_BK2_IO2 */ + , /* QSPI_BK2_IO3 */ + ; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = , /* SAI2_SCK_A */ + , /* SAI2_SD_A */ + , /* SAI2_FS_A */ + ; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = , /* SAI2_SCK_A */ + , /* SAI2_SD_A */ + , /* SAI2_FS_A */ + ; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = , /* SAI2_SCK_B */ + , /* SAI2_FS_B */ + ; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = , /* SAI2_SD_B */ + , /* SAI2_SCK_B */ + , /* SAI2_FS_B */ + ; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = ; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = ; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = ; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = ; /* SAI4_SD_A */ + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + ; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = ; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + , /* SDMMC1_D3 */ + , /* SDMMC1_CK */ + ; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + ; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = ; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + , /* SDMMC1_CDIR */ + ; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + ; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + , /* SDMMC2_CK */ + ; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_b4_pins_b: sdmmc2-b4-1 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + , /* SDMMC2_D3 */ + ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { + pins1 { + pinmux = , /* SDMMC2_D0 */ + , /* SDMMC2_D1 */ + , /* SDMMC2_D2 */ + ; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = ; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; + }; + + sdmmc3_b4_pins_a: sdmmc3-b4-0 { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + ; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { + pins1 { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + ; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = ; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = ; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { + pins { + pinmux = , /* SDMMC3_D0 */ + , /* SDMMC3_D1 */ + , /* SDMMC3_D2 */ + , /* SDMMC3_D3 */ + , /* SDMMC3_CK */ + ; /* SDMMC3_CMD */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = ; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = ; /* SPDIF_IN1 */ + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* UART4_RX */ + , /* UART4_CTS */ + ; /* UART4_RTS */ + bias-disable; + }; + }; +}; + +&pinctrl_z { + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = ; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = ; /* I2C2_SCL */ + }; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = , /* I2C4_SCL */ + ; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = , /* I2C4_SCL */ + ; /* I2C4_SDA */ + }; + }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = , /* SPI1_SCK */ + ; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = ; /* SPI1_MISO */ + bias-disable; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index d3a9791a0fda..ce641c4359cf 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -1572,6 +1572,163 @@ i2c6: i2c@5c009000 { #size-cells = <0>; status = "disabled"; }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + }; }; mlahb { From 48c7181fa79fbaf6019087a590092b014bc567aa Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Mon, 18 Nov 2019 17:49:33 +0100 Subject: [PATCH 14/37] ARM: dts: stm32: Update stm32mp157 pinctrl files In order to cover the STM32MP15 SOCs family this commit updates pinctrl file names (group definition and packages files). This family includes: STM32MP151, STM32MP153 and STM32MP157. Signed-off-by: Alexandre Torgue --- ...57-pinctrl.dtsi => stm32mp15-pinctrl.dtsi} | 0 arch/arm/boot/dts/stm32mp157a-avenger96.dts | 3 +- arch/arm/boot/dts/stm32mp157a-dk1.dts | 3 +- arch/arm/boot/dts/stm32mp157c-ed1.dts | 3 +- arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi | 90 ------------------- arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi | 62 ------------- arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi | 78 ---------------- arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi | 62 ------------- arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi | 85 ++++++++++++++++++ arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi | 57 ++++++++++++ arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi | 73 +++++++++++++++ arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi | 57 ++++++++++++ 12 files changed, 278 insertions(+), 295 deletions(-) rename arch/arm/boot/dts/{stm32mp157-pinctrl.dtsi => stm32mp15-pinctrl.dtsi} (100%) delete mode 100644 arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi delete mode 100644 arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi delete mode 100644 arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi delete mode 100644 arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi create mode 100644 arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi similarity index 100% rename from arch/arm/boot/dts/stm32mp157-pinctrl.dtsi rename to arch/arm/boot/dts/stm32mp15-pinctrl.dtsi diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 628c74a45a25..2f6dd51e8506 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -7,7 +7,8 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include #include diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 2f9f8cf94b02..7ee7b4d13d39 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -7,7 +7,8 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include #include diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 341fb6064447..e5d8da01aaef 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -6,7 +6,8 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157xaa-pinctrl.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" #include #include diff --git a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi deleted file mode 100644 index 875adf5e1e30..000000000000 --- a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = ; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; - }; - - gpioj: gpio@5000b000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; - }; - - gpiok: gpio@5000c000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = ; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi deleted file mode 100644 index 961fa12a59c3..000000000000 --- a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = ; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi deleted file mode 100644 index 26600f188d25..000000000000 --- a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = ; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <12>; - gpio-ranges = <&pinctrl 0 128 12>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = ; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi deleted file mode 100644 index 910113f3e69a..000000000000 --- a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = ; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi new file mode 100644 index 000000000000..04f7a43ad66f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + st,package = ; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi new file mode 100644 index 000000000000..328dad140e9b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi new file mode 100644 index 000000000000..7eaa245f44db --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + st,package = ; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi new file mode 100644 index 000000000000..b63e207de216 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; From 95e395c881b35101578f8a7e1041cebcf21d7d79 Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Tue, 19 Nov 2019 10:06:57 +0100 Subject: [PATCH 15/37] ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and STM32MP153 STM32MP151 and STM32MP153 were not explicitly supported through stm32mp157c.dts. This commit adds dedicated files to support all STM32MP15 SOCs family. The differences between those SOCs are: -STM32MP151 [1]: common file. -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU. -STM32MP157 [3]: STM32MP153 + DSI + GPU. [1] https://www.st.com/resource/en/reference_manual/dm00366349.pdf [2] https://www.st.com/resource/en/reference_manual/dm00366355.pdf [3] https://www.st.com/resource/en/reference_manual/dm00327659.pdf Signed-off-by: Alexandre Torgue --- .../dts/{stm32mp157c.dtsi => stm32mp151.dtsi} | 52 ------------------- arch/arm/boot/dts/stm32mp153.dtsi | 45 ++++++++++++++++ arch/arm/boot/dts/stm32mp157.dtsi | 31 +++++++++++ arch/arm/boot/dts/stm32mp157a-avenger96.dts | 2 +- arch/arm/boot/dts/stm32mp157a-dk1.dts | 2 +- arch/arm/boot/dts/stm32mp157c-ed1.dts | 2 +- 6 files changed, 79 insertions(+), 55 deletions(-) rename arch/arm/boot/dts/{stm32mp157c.dtsi => stm32mp151.dtsi} (96%) create mode 100644 arch/arm/boot/dts/stm32mp153.dtsi create mode 100644 arch/arm/boot/dts/stm32mp157.dtsi diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi similarity index 96% rename from arch/arm/boot/dts/stm32mp157c.dtsi rename to arch/arm/boot/dts/stm32mp151.dtsi index ce641c4359cf..9a0b55be134d 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -20,12 +20,6 @@ cpu0: cpu@0 { device_type = "cpu"; reg = <0>; }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; }; psci { @@ -953,32 +947,6 @@ dfsdm5: filter@5 { }; }; - m_can1: can@4400e000 { - compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x1400>; - reg-names = "m_can", "message_ram"; - interrupts = , - ; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - m_can2: can@4400f000 { - compatible = "bosch,m_can"; - reg = <0x4400f000 0x400>, <0x44011000 0x2800>; - reg-names = "m_can", "message_ram"; - interrupts = , - ; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; - status = "disabled"; - }; - dma1: dma@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -1444,26 +1412,6 @@ usbh_ehci: usbh-ehci@5800d000 { status = "disabled"; }; - gpu: gpu@59000000 { - compatible = "vivante,gc"; - reg = <0x59000000 0x800>; - interrupts = ; - clocks = <&rcc GPU>, <&rcc GPU_K>; - clock-names = "bus" ,"core"; - resets = <&rcc GPU_R>; - status = "disabled"; - }; - - dsi: dsi@5a000000 { - compatible = "st,stm32-dsi"; - reg = <0x5a000000 0x800>; - clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; - clock-names = "pclk", "ref", "px_clk"; - resets = <&rcc DSI_R>; - reset-names = "apb"; - status = "disabled"; - }; - ltdc: display-controller@5a001000 { compatible = "st,stm32-ltdc"; reg = <0x5a001000 0x400>; diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi new file mode 100644 index 000000000000..2d759fc6015c --- /dev/null +++ b/arch/arm/boot/dts/stm32mp153.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include "stm32mp151.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = , + ; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi new file mode 100644 index 000000000000..3f0a4a91cce6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include "stm32mp153.dtsi" + +/ { + soc { + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = ; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 2f6dd51e8506..cbfa4075907e 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "stm32mp157c.dtsi" +#include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxac-pinctrl.dtsi" #include diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 7ee7b4d13d39..3f869bd67082 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "stm32mp157c.dtsi" +#include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxac-pinctrl.dtsi" #include diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index e5d8da01aaef..975f69ea4eed 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -5,7 +5,7 @@ */ /dts-v1/; -#include "stm32mp157c.dtsi" +#include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxaa-pinctrl.dtsi" #include From 0eda69b6c5f90321c4fefbaee1360cb99dc14a65 Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Tue, 19 Nov 2019 11:03:58 +0100 Subject: [PATCH 16/37] ARM: dts: stm32: Manage security diversity for STM32M15x SOCs This commit creates a new file to manage security diversity on STM32MP15x SOCs. On STM32MP15xY, "Y" gives information: -Y = A means no cryp IP and no secure boot. -Y = C means cryp IP + secure boot. Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 9 --------- arch/arm/boot/dts/stm32mp15xc.dtsi | 18 ++++++++++++++++++ 2 files changed, 18 insertions(+), 9 deletions(-) create mode 100644 arch/arm/boot/dts/stm32mp15xc.dtsi diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 9a0b55be134d..072fc7025987 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1255,15 +1255,6 @@ dts: thermal@50028000 { status = "disabled"; }; - cryp1: cryp@54001000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54001000 0x400>; - interrupts = ; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; - hash1: hash@54002000 { compatible = "st,stm32f756-hash"; reg = <0x54002000 0x400>; diff --git a/arch/arm/boot/dts/stm32mp15xc.dtsi b/arch/arm/boot/dts/stm32mp15xc.dtsi new file mode 100644 index 000000000000..b06a55a2fa18 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xc.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { + soc { + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = ; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + status = "disabled"; + }; + }; +}; From 144d1ba705480c96baea4c4a689be13189c5b400 Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Tue, 19 Nov 2019 11:29:18 +0100 Subject: [PATCH 17/37] ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity To handle STM32MP15 SOCs diversity, some updates have to been done. This commit mainly adapt dk1 board to include the correct package and the correct SOC version. A new file has been created to factorize common parts. Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157a-dk1.dts | 590 +----------------------- arch/arm/boot/dts/stm32mp157c-dk2.dts | 15 +- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 597 +++++++++++++++++++++++++ 3 files changed, 612 insertions(+), 590 deletions(-) create mode 100644 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 3f869bd67082..d03d4cd2606a 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -9,8 +9,7 @@ #include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxac-pinctrl.dtsi" -#include -#include +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; @@ -24,591 +23,4 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mcuram2: mcuram2@10000000 { - compatible = "shared-dma-pool"; - reg = <0x10000000 0x40000>; - no-map; - }; - - vdev0vring0: vdev0vring0@10040000 { - compatible = "shared-dma-pool"; - reg = <0x10040000 0x1000>; - no-map; - }; - - vdev0vring1: vdev0vring1@10041000 { - compatible = "shared-dma-pool"; - reg = <0x10041000 0x1000>; - no-map; - }; - - vdev0buffer: vdev0buffer@10042000 { - compatible = "shared-dma-pool"; - reg = <0x10042000 0x4000>; - no-map; - }; - - mcuram: mcuram@30000000 { - compatible = "shared-dma-pool"; - reg = <0x30000000 0x40000>; - no-map; - }; - - retram: retram@38000000 { - compatible = "shared-dma-pool"; - reg = <0x38000000 0x10000>; - no-map; - }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; - }; - - led { - compatible = "gpio-leds"; - blue { - label = "heartbeat"; - gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - sound { - compatible = "audio-graph-card"; - label = "STM32MP1-DK"; - routing = - "Playback" , "MCLK", - "Capture" , "MCLK", - "MICL" , "Mic Bias"; - dais = <&sai2a_port &sai2b_port &i2s2_port>; - status = "okay"; - }; -}; - -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; - vdd-supply = <&vdd>; - vdda-supply = <&vdd>; - vref-supply = <&vrefbuf>; - status = "disabled"; - adc1: adc@0 { - /* - * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. - * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: - * 5 * (56 + 47kOhms) * 5pF => 2.5us. - * Use arbitrary margin here (e.g. 5us). - */ - st,min-sample-time-nsecs = <5000>; - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 6 13 18 19>; - status = "okay"; - }; - adc2: adc@100 { - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 2 6 18 19>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; - }; -}; - -&cec { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; - status = "okay"; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rgmii-id"; - max-speed = <1000>; - phy-handle = <&phy0>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; -}; - -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; - i2c-scl-rising-time-ns = <100>; - i2c-scl-falling-time-ns = <7>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - hdmi-transmitter@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - iovcc-supply = <&v3v3_hdmi>; - cvcc12-supply = <&v1v2_hdmi>; - reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpiog>; - #sound-dai-cells = <0>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sii9022_in: endpoint { - remote-endpoint = <<dc_ep0_out>; - }; - }; - - port@3 { - reg = <3>; - sii9022_tx_endpoint: endpoint { - remote-endpoint = <&i2s2_endpoint>; - }; - }; - }; - }; - - cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - #sound-dai-cells = <0>; - VL-supply = <&v3v3>; - VD-supply = <&v1v8_audio>; - VA-supply = <&v1v8_audio>; - VAHP-supply = <&v1v8_audio>; - reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; - clocks = <&sai2a>; - clock-names = "MCLK"; - status = "okay"; - - cs42l51_port: port { - #address-cells = <1>; - #size-cells = <0>; - - cs42l51_tx_endpoint: endpoint@0 { - reg = <0>; - remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; - }; - - cs42l51_rx_endpoint: endpoint@1 { - reg = <1>; - remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; - }; - }; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - ldo1-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - st,mask-reset; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - v1v8_audio: ldo1 { - regulator-name = "v1v8_audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - interrupts = ; - }; - - v3v3_hdmi: ldo2 { - regulator-name = "v3v3_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - interrupts = ; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - interrupts = ; - }; - - vdda: ldo5 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = ; - regulator-boot-on; - }; - - v1v2_hdmi: ldo6 { - regulator-name = "v1v2_hdmi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - interrupts = ; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - regulator-over-current-protection; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = ; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = ; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - interrupts = ; - regulator-active-discharge = <1>; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = , ; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&i2s2 { - clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "i2sclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2s2_pins_a>; - pinctrl-1 = <&i2s2_pins_sleep_a>; - status = "okay"; - - i2s2_port: port { - i2s2_endpoint: endpoint { - remote-endpoint = <&sii9022_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - }; - }; -}; - -&ipcc { - status = "okay"; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -<dc { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; - status = "okay"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - ltdc_ep0_out: endpoint@0 { - reg = <0>; - remote-endpoint = <&sii9022_in>; - }; - }; -}; - -&m4_rproc { - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, - <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; - interrupt-parent = <&exti>; - interrupts = <68 1>; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sai2 { - clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; - pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; - status = "okay"; - - sai2a: audio-controller@4400b004 { - #clock-cells = <0>; - dma-names = "tx"; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - status = "okay"; - - sai2a_port: port { - sai2a_endpoint: endpoint { - remote-endpoint = <&cs42l51_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; - - sai2b: audio-controller@4400b024 { - dma-names = "rx"; - st,sync = <&sai2a 2>; - clocks = <&rcc SAI2_K>, <&sai2a>; - clock-names = "sai_ck", "MCLK"; - status = "okay"; - - sai2b_port: port { - sai2b_endpoint: endpoint { - remote-endpoint = <&cs42l51_rx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "okay"; -}; - -&sdmmc3 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc3_b4_pins_a>; - pinctrl-1 = <&sdmmc3_b4_od_pins_a>; - pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; - broken-cd; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "disabled"; -}; - -&timers1 { - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm1_pins_a>; - pinctrl-1 = <&pwm1_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@0 { - status = "okay"; - }; -}; - -&timers3 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm3_pins_a>; - pinctrl-1 = <&pwm3_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@2 { - status = "okay"; - }; -}; - -&timers4 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; - pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@3 { - status = "okay"; - }; -}; - -&timers5 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm5_pins_a>; - pinctrl-1 = <&pwm5_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@4 { - status = "okay"; - }; -}; - -&timers6 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - timer@5 { - status = "okay"; - }; -}; - -&timers12 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm12_pins_a>; - pinctrl-1 = <&pwm12_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@11 { - status = "okay"; - }; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&vrefbuf { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - vdda-supply = <&vdd>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index d26adcbeba33..7985b80967ca 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -6,11 +6,24 @@ /dts-v1/; -#include "stm32mp157a-dk1.dts" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &dsi { diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi new file mode 100644 index 000000000000..24d798d503d4 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -0,0 +1,597 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +#include +#include + +/ { + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-DK"; + routing = + "Playback" , "MCLK", + "Capture" , "MCLK", + "MICL" , "Mic Bias"; + dais = <&sai2a_port &sai2b_port &i2s2_port>; + status = "okay"; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc@0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc@100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + #sound-dai-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@3 { + reg = <3>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; + }; + }; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + #sound-dai-cells = <0>; + VL-supply = <&v3v3>; + VD-supply = <&v1v8_audio>; + VA-supply = <&v1v8_audio>; + VAHP-supply = <&v1v8_audio>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + clocks = <&sai2a>; + clock-names = "MCLK"; + status = "okay"; + + cs42l51_port: port { + #address-cells = <1>; + #size-cells = <0>; + + cs42l51_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + cs42l51_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = ; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = ; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = ; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = ; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = ; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = ; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = ; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = ; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = , ; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_pins_sleep_a>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&cs42l51_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&cs42l51_rx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers6 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + timer@5 { + status = "okay"; + }; +}; + +&timers12 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; From a2bec7058852f262923de94855991c7739185f7b Mon Sep 17 00:00:00 2001 From: Alexandre Torgue Date: Tue, 19 Nov 2019 11:35:04 +0100 Subject: [PATCH 18/37] ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 DT diversity This commit adds security (cryp1) IP to stm32mp157c ED1 board by including stm32mp15xc.dtsi file. Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ed1.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 975f69ea4eed..1fc43251d697 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxaa-pinctrl.dtsi" #include From bfcfbb5c6c57e2f31feacd87d8253ef1a7fd3014 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 4 Dec 2019 16:53:00 +0100 Subject: [PATCH 19/37] ARM: dts: stm32: remove "@" and "_" from stm32f4 pinmux groups Replace all "@" and "_" by "-" in pinmux groups for stm32f4 family. This avoid errors when using yaml to check the bindings. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 28 +++++++++++++------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 35202896c093..392fa143ce07 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -163,7 +163,7 @@ gpiok: gpio@40022800 { st,bank-name = "GPIOK"; }; - usart1_pins_a: usart1@0 { + usart1_pins_a: usart1-0 { pins1 { pinmux = ; /* USART1_TX */ bias-disable; @@ -176,7 +176,7 @@ pins2 { }; }; - usart3_pins_a: usart3@0 { + usart3_pins_a: usart3-0 { pins1 { pinmux = ; /* USART3_TX */ bias-disable; @@ -189,7 +189,7 @@ pins2 { }; }; - usbotg_fs_pins_a: usbotg_fs@0 { + usbotg_fs_pins_a: usbotg-fs-0 { pins { pinmux = , /* OTG_FS_ID */ , /* OTG_FS_DM */ @@ -200,7 +200,7 @@ pins { }; }; - usbotg_fs_pins_b: usbotg_fs@1 { + usbotg_fs_pins_b: usbotg-fs-1 { pins { pinmux = , /* OTG_HS_ID */ , /* OTG_HS_DM */ @@ -211,7 +211,7 @@ pins { }; }; - usbotg_hs_pins_a: usbotg_hs@0 { + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = , /* OTG_HS_ULPI_NXT*/ , /* OTG_HS_ULPI_DIR */ @@ -231,7 +231,7 @@ pins { }; }; - ethernet_mii: mii@0 { + ethernet_mii: mii-0 { pins { pinmux = , /* ETH_MII_TXD0_ETH_RMII_TXD0 */ , /* ETH_MII_TXD1_ETH_RMII_TXD1 */ @@ -251,13 +251,13 @@ pins { }; }; - adc3_in8_pin: adc@200 { + adc3_in8_pin: adc-200 { pins { pinmux = ; }; }; - pwm1_pins: pwm@1 { + pwm1_pins: pwm-1 { pins { pinmux = , /* TIM1_CH1 */ , /* TIM1_CH1N */ @@ -265,14 +265,14 @@ pins { }; }; - pwm3_pins: pwm@3 { + pwm3_pins: pwm-3 { pins { pinmux = , /* TIM3_CH1 */ ; /* TIM3_CH2 */ }; }; - i2c1_pins: i2c1@0 { + i2c1_pins: i2c1-0 { pins { pinmux = , /* I2C1_SDA */ ; /* I2C1_SCL */ @@ -282,7 +282,7 @@ pins { }; }; - ltdc_pins: ltdc@0 { + ltdc_pins: ltdc-0 { pins { pinmux = , /* LCD_HSYNC */ , /* LCD_VSYNC */ @@ -316,7 +316,7 @@ pins { }; }; - dcmi_pins: dcmi@0 { + dcmi_pins: dcmi-0 { pins { pinmux = , /* DCMI_HSYNC */ , /* DCMI_VSYNC */ @@ -339,7 +339,7 @@ pins { }; }; - sdio_pins: sdio_pins@0 { + sdio_pins: sdio-pins-0 { pins { pinmux = , /* SDIO_D0 */ , /* SDIO_D1 */ @@ -352,7 +352,7 @@ pins { }; }; - sdio_pins_od: sdio_pins_od@0 { + sdio_pins_od: sdio-pins-od-0 { pins1 { pinmux = , /* SDIO_D0 */ , /* SDIO_D1 */ From 49a58ba196036f6993f8bee7c9a9509463ccf81b Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 4 Dec 2019 16:53:00 +0100 Subject: [PATCH 20/37] ARM: dts: stm32: remove "@" and "_" from stm32f7 pinmux groups Replace all "@" and "_" by "-" in pinmux groups for stm32f7 family. This avoid errors when using yaml to check the bindings. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 9314128df185..fe4cfda72a47 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -127,7 +127,7 @@ gpiok: gpio@40022800 { st,bank-name = "GPIOK"; }; - cec_pins_a: cec@0 { + cec_pins_a: cec-0 { pins { pinmux = ; /* HDMI CEC */ slew-rate = <0>; @@ -136,7 +136,7 @@ pins { }; }; - usart1_pins_a: usart1@0 { + usart1_pins_a: usart1-0 { pins1 { pinmux = ; /* USART1_TX */ bias-disable; @@ -149,7 +149,7 @@ pins2 { }; }; - usart1_pins_b: usart1@1 { + usart1_pins_b: usart1-1 { pins1 { pinmux = ; /* USART1_TX */ bias-disable; @@ -162,7 +162,7 @@ pins2 { }; }; - i2c1_pins_b: i2c1@0 { + i2c1_pins_b: i2c1-0 { pins { pinmux = , /* I2C1 SDA */ ; /* I2C1 SCL */ @@ -172,7 +172,7 @@ pins { }; }; - usbotg_hs_pins_a: usbotg-hs@0 { + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = , /* OTG_HS_ULPI_NXT */ , /* OTG_HS_ULPI_DIR */ @@ -192,7 +192,7 @@ pins { }; }; - usbotg_hs_pins_b: usbotg-hs@1 { + usbotg_hs_pins_b: usbotg-hs-1 { pins { pinmux = , /* OTG_HS_ULPI_NXT */ , /* OTG_HS_ULPI_DIR */ @@ -212,7 +212,7 @@ pins { }; }; - usbotg_fs_pins_a: usbotg-fs@0 { + usbotg_fs_pins_a: usbotg-fs-0 { pins { pinmux = , /* OTG_FS_ID */ , /* OTG_FS_DM */ @@ -223,7 +223,7 @@ pins { }; }; - sdio_pins_a: sdio_pins_a@0 { + sdio_pins_a: sdio-pins-a-0 { pins { pinmux = , /* SDMMC1 D0 */ , /* SDMMC1 D1 */ @@ -236,7 +236,7 @@ pins { }; }; - sdio_pins_od_a: sdio_pins_od_a@0 { + sdio_pins_od_a: sdio-pins-od-a-0 { pins1 { pinmux = , /* SDMMC1 D0 */ , /* SDMMC1 D1 */ @@ -254,7 +254,7 @@ pins2 { }; }; - sdio_pins_b: sdio_pins_b@0 { + sdio_pins_b: sdio-pins-b-0 { pins { pinmux = , /* SDMMC2 D0 */ , /* SDMMC2 D1 */ @@ -267,7 +267,7 @@ pins { }; }; - sdio_pins_od_b: sdio_pins_od_b@0 { + sdio_pins_od_b: sdio-pins-od-b-0 { pins1 { pinmux = , /* SDMMC2 D0 */ , /* SDMMC2 D1 */ From 33ce3e626cef3ec0d1ffc22211931e16531facb1 Mon Sep 17 00:00:00 2001 From: Christophe Roullier Date: Mon, 9 Dec 2019 14:40:52 +0100 Subject: [PATCH 21/37] ARM: dts: stm32: remove syscfg clock on stm32mp15 ethernet Syscfg is now activated automatically when syscfg registers are used. Signed-off-by: Christophe Roullier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 072fc7025987..facfc0b884d7 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1369,13 +1369,11 @@ ethernet0: ethernet@5800a000 { clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx", - "ethstp", - "syscfg-clk"; + "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, - <&rcc ETHSTP>, - <&rcc SYSCFG>; + <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; snps,pbl = <2>; From 46ccf1cecb224c73a20454134fd19833b2f385fd Mon Sep 17 00:00:00 2001 From: Christophe Roullier Date: Mon, 9 Dec 2019 14:55:20 +0100 Subject: [PATCH 22/37] ARM: dts: stm32: adjust slew rate for Ethernet on stm32mp15 ETH_MDIO slew-rate should be set to "0" instead of "2". Signed-off-by: Christophe Roullier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 14e0ee82d94d..0237d4ddaa92 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -120,13 +120,18 @@ pins1 { , /* ETH_RGMII_TXD2 */ , /* ETH_RGMII_TXD3 */ , /* ETH_RGMII_TX_CTL */ - , /* ETH_MDIO */ ; /* ETH_MDC */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <2>; }; pins2 { + pinmux = ; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = , /* ETH_RGMII_RXD0 */ , /* ETH_RGMII_RXD1 */ , /* ETH_RGMII_RXD2 */ From bf848759fb7877203d0be92b1243dccd447af662 Mon Sep 17 00:00:00 2001 From: Christophe Roullier Date: Mon, 9 Dec 2019 14:58:17 +0100 Subject: [PATCH 23/37] ARM: dts: stm32: Enable MAC TX clock gating during TX low-power mode on stm32mp15 When there is no activity on ethernet phy link, the ETH_GTX_CLK is cut. Signed-off-by: Christophe Roullier Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index facfc0b884d7..b0f3fa564967 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1377,6 +1377,7 @@ ethernet0: ethernet@5800a000 { st,syscon = <&syscfg 0x4>; snps,mixed-burst; snps,pbl = <2>; + snps,en-tx-lpi-clockgating; snps,axi-config = <&stmmac_axi_config_0>; snps,tso; status = "disabled"; From ad8e5610da1efa1e586456c83de453742f93a8c0 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Mon, 2 Dec 2019 15:56:00 +0100 Subject: [PATCH 24/37] ARM: dts: stm32: remove useless clock-names from RTC node on stm32f429 On stm32f4 family RTC node doesn't need clock-names property. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 196817da0c1d..dab6351883e7 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -318,7 +318,6 @@ rtc: rtc@40002800 { compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; clocks = <&rcc 1 CLK_RTC>; - clock-names = "ck_rtc"; assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSE>; interrupt-parent = <&exti>; From 117e5dd21cedf27e67b918fd0d9f8e2d3b6ac2c2 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Mon, 2 Dec 2019 15:56:00 +0100 Subject: [PATCH 25/37] ARM: dts: stm32: remove useless clock-names from RTC node on stm32f746 On stm32f7 family RTC node doesn't need clock-names property. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f746.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index d26f93f8b9c2..3a8e2dc1978c 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -300,7 +300,6 @@ rtc: rtc@40002800 { compatible = "st,stm32-rtc"; reg = <0x40002800 0x400>; clocks = <&rcc 1 CLK_RTC>; - clock-names = "ck_rtc"; assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSE>; interrupt-parent = <&exti>; From c10213273fe0b05e8c72d21318f9375d00531edf Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Mon, 9 Dec 2019 15:15:09 +0100 Subject: [PATCH 26/37] ARM: dts: stm32: enable USBPHYC on stm32mp15 DKx boards This patch enables USBPHYC (USB PHY Controller on stm32mp15 DKx boards. This enables the two usbphyc usb2 ports, which require 3 supplies: 3v3, 1v1 and 1v8. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 24d798d503d4..3a12e61ede92 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -589,6 +589,22 @@ &uart4 { status = "okay"; }; +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + &vrefbuf { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; From 5841d00fe059d9eaa1f8fb031af32e4a6a97c957 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Mon, 9 Dec 2019 15:17:26 +0100 Subject: [PATCH 27/37] ARM: dts: stm32: enable USB Host (USBH) EHCI controller on stm32mp15 DKx This patch enables USB Host (USBH) EHCI controller on stm32mp15 dk boards. As a hub is used between USBH and USB connectors, no need to enable USBH OHCI controller: all low- and full-speed traffic is managed by the hub. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 3a12e61ede92..71c781b85deb 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -589,6 +589,11 @@ &uart4 { status = "okay"; }; +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + &usbphyc { status = "okay"; }; From 426c1e8fa7bf162b51f293a08afd1329dd32260d Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Mon, 9 Dec 2019 15:23:22 +0100 Subject: [PATCH 28/37] ARM: dts: stm32: enable USB OTG HS on stm32mp15 DKx boards This patch enables USB OTG HS on stm32mp15 dkx in Peripheral mode. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 71c781b85deb..f6672e87aef3 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -594,6 +594,13 @@ &usbh_ehci { status = "okay"; }; +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + &usbphyc { status = "okay"; }; From 6bdc753de6892d0c5f68a265499f206de901a958 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Thu, 21 Nov 2019 17:12:00 +0100 Subject: [PATCH 29/37] ARM: dts: stm32: add phy-names to usbotg_hs on stm32mp157c-ev1 phy-names is required by usbotg_hs driver to get the phy, otherwise, it considers that there is no phys property. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 2010f6292a77..228e35e16884 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -355,6 +355,7 @@ &usbh_ehci { &usbotg_hs { dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; status = "okay"; }; From 5659be8dcf1cef531eea8b0418b032b73e854020 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 18 Dec 2019 15:48:42 +0100 Subject: [PATCH 30/37] ARM: dts: stm32: fix dma controller node name on stm32f746 Modify dma controller nodes name to fit with the standard naming. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f746.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 3a8e2dc1978c..93c063796780 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -586,7 +586,7 @@ rcc: rcc@40023800 { assigned-clock-rates = <1000000>; }; - dma1: dma@40026000 { + dma1: dma-controller@40026000 { compatible = "st,stm32-dma"; reg = <0x40026000 0x400>; interrupts = <11>, @@ -602,7 +602,7 @@ dma1: dma@40026000 { status = "disabled"; }; - dma2: dma@40026400 { + dma2: dma-controller@40026400 { compatible = "st,stm32-dma"; reg = <0x40026400 0x400>; interrupts = <56>, From 6a60dc23a0dae18bc439e18a8e65185c77bf66f5 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 18 Dec 2019 15:48:43 +0100 Subject: [PATCH 31/37] ARM: dts: stm32: fix dma controller node name on stm32f743 Modify dma controller nodes name to fit with the standard naming. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32h743.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index c065266ee377..05eb02e6d083 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -231,7 +231,7 @@ spi5: spi@40015000 { status = "disabled"; }; - dma1: dma@40020000 { + dma1: dma-controller@40020000 { compatible = "st,stm32-dma"; reg = <0x40020000 0x400>; interrupts = <11>, @@ -249,7 +249,7 @@ dma1: dma@40020000 { status = "disabled"; }; - dma2: dma@40020400 { + dma2: dma-controller@40020400 { compatible = "st,stm32-dma"; reg = <0x40020400 0x400>; interrupts = <56>, @@ -329,7 +329,7 @@ usbotg_fs: usb@40080000 { status = "disabled"; }; - mdma1: dma@52000000 { + mdma1: dma-controller@52000000 { compatible = "st,stm32h7-mdma"; reg = <0x52000000 0x1000>; interrupts = <122>; From a0fc09abf454938479986744ce41877fef9590fa Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 18 Dec 2019 15:48:44 +0100 Subject: [PATCH 32/37] ARM: dts: stm32: fix dma controller node name on stm32mp157c Modify dma controller nodes name to fit with the standard naming. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index b0f3fa564967..3dd570b10181 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -947,7 +947,7 @@ dfsdm5: filter@5 { }; }; - dma1: dma@48000000 { + dma1: dma-controller@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; interrupts = , @@ -964,7 +964,7 @@ dma1: dma@48000000 { dma-requests = <8>; }; - dma2: dma@48001000 { + dma2: dma-controller@48001000 { compatible = "st,stm32-dma"; reg = <0x48001000 0x400>; interrupts = , @@ -1275,7 +1275,7 @@ rng1: rng@54003000 { status = "disabled"; }; - mdma1: dma@58000000 { + mdma1: dma-controller@58000000 { compatible = "st,stm32h7-mdma"; reg = <0x58000000 0x1000>; interrupts = ; From a09c71817f73a1354b55513aaa5acb90d840fa8e Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Thu, 19 Dec 2019 13:18:15 +0100 Subject: [PATCH 33/37] ARM: dts: stm32: update mlahb node according to the bindings on stm32mp15 Update of the mlahb node according to to DT bindings using json-schema Signed-off-by: Arnaud Pouliquen Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 3dd570b10181..047051c56ef7 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1669,10 +1669,11 @@ gpioz: gpio@54004000 { }; }; - mlahb { - compatible = "simple-bus"; + mlahb: ahb { + compatible = "st,mlahb", "simple-bus"; #address-cells = <1>; #size-cells = <1>; + ranges; dma-ranges = <0x00000000 0x38000000 0x10000>, <0x10000000 0x10000000 0x60000>, <0x30000000 0x30000000 0x60000>; From f723d518bff3f86320bd56496c497f96a0f7499c Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Thu, 19 Dec 2019 15:41:16 +0100 Subject: [PATCH 34/37] ARM: dts: stm32: change nvmem node name on stm32f429 Change non volatile node name from nvmem to efuse to be compliant with yaml schema. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index dab6351883e7..d7770699feb5 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -80,7 +80,7 @@ clk_i2s_ckin: i2s-ckin { }; soc { - romem: nvmem@1fff7800 { + romem: efuse@1fff7800 { compatible = "st,stm32f4-otp"; reg = <0x1fff7800 0x400>; #address-cells = <1>; From 11ee8c7e44f5e66a771d0a6e07d73a66b4a696f4 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Thu, 19 Dec 2019 15:41:17 +0100 Subject: [PATCH 35/37] ARM: dts: stm32: change nvmem node name on stm32mp1 Change non volatile node name from nvmem to efuse to be compliant with yaml schema. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 047051c56ef7..fb41d0778b00 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1485,7 +1485,7 @@ rtc: rtc@5c004000 { status = "disabled"; }; - bsec: nvmem@5c005000 { + bsec: efuse@5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; #address-cells = <1>; From 0ff15a86d0c5a3f004fee2e92d65b88e56a3bc58 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 8 Jan 2020 14:26:47 +0100 Subject: [PATCH 36/37] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco Add a fixed regulator and use it as power supply for DSI panel. Fixes: 18c8866266 ("ARM: dts: stm32: Add display support on stm32f469-disco") Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f469-disco.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index f3ce477b7bae..9397db0c43de 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -76,6 +76,13 @@ mmc_vcard: mmc_vcard { regulator-max-microvolt = <3300000>; }; + vdd_dsi: vdd-dsi { + compatible = "regulator-fixed"; + regulator-name = "vdd_dsi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + soc { dma-ranges = <0xc0000000 0x0 0x10000000>; }; @@ -155,6 +162,7 @@ panel-dsi@0 { compatible = "orisetech,otm8009a"; reg = <0>; /* dsi virtual channel (0..3) */ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + power-supply = <&vdd_dsi>; status = "okay"; port { From f8849332aeda1c3a28a0d1bfcaff90e089d0ebcf Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 8 Jan 2020 14:26:46 +0100 Subject: [PATCH 37/37] ARM: dts: stm32: Add power-supply for RGB panel on stm32429i-eval Add a fixed regulator and use it as power supply for RBG panel. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32429i-eval.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 58288aa53fee..c27fa355e5ab 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -95,6 +95,13 @@ vref: regulator-vref { regulator-max-microvolt = <3300000>; }; + vdd_panel: vdd-panel { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + leds { compatible = "gpio-leds"; green { @@ -138,6 +145,7 @@ usbotg_hs_phy: usbphy { panel_rgb: panel-rgb { compatible = "ampire,am-480272h3tmqw-t01h"; + power-supply = <&vdd_panel>; status = "okay"; port { panel_in_rgb: endpoint {