diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
index c6f5aa38ebf9..89552ae70660 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -85,6 +85,8 @@ mdio: mdio {
 		ethphy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
+			reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+			reset-assert-us = <30>;
 		};
 	};
 };
@@ -206,14 +208,17 @@ pinctrl_fec: fecgrp {
 		fsl,pins = <
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x50e
 			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x502
-			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
-			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
-			MX93_PAD_ENET2_RXC__ENET1_RX_ER			0x5fe
+			/* the three pins below are connected to PHYs straps,
+			 * that is what the pull-up/down setting is for.
+			 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x37e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x37e
 			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
 			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x50e
 			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x50e
 			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x50e
 			MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
+			MX93_PAD_ENET2_RXC__GPIO4_IO23			0x51e
 		>;
 	};