mirror of
https://github.com/torvalds/linux.git
synced 2026-06-02 11:33:28 +02:00
arm64: dts: rockchip: Add USB and charger to Gameforce Ace
Add support for the BQ25703A charger manager and boost regulator to the Gameforce Ace. Add the USB-C port and PHY as well as they all depend on each other for operation. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20250904160530.66178-6-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
parent
d81b0c3099
commit
36d05f21da
|
|
@ -612,6 +612,56 @@ &i2c6 {
|
|||
pinctrl-0 = <&i2c6m3_xfer>;
|
||||
status = "okay";
|
||||
|
||||
fusb302: typec@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&usbc0_int>;
|
||||
pinctrl-names = "default";
|
||||
vbus-supply = <&usb_otg_vbus>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
data-role = "dual";
|
||||
label = "USB-C";
|
||||
op-sink-microwatt = <1000000>;
|
||||
power-role = "dual";
|
||||
self-powered;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
||||
PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
|
||||
PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
try-power-role = "sink";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
usbc0_orien_sw: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
usbc0_role_sw: endpoint {
|
||||
remote-endpoint = <&dwc3_0_role_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
dp_altmode_mux: endpoint {
|
||||
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rtc_hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
|
|
@ -640,8 +690,34 @@ battery@62 {
|
|||
0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>;
|
||||
cellwise,monitor-interval-ms = <5000>;
|
||||
monitored-battery = <&battery>;
|
||||
power-supplies = <&bq25703>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
bq25703: charger@6b {
|
||||
compatible = "ti,bq25703a";
|
||||
reg = <0x6b>;
|
||||
input-current-limit-microamp = <5000000>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD5 IRQ_TYPE_LEVEL_LOW>;
|
||||
monitored-battery = <&battery>;
|
||||
pinctrl-0 = <&charger_int_h>;
|
||||
pinctrl-names = "default";
|
||||
power-supplies = <&fusb302>;
|
||||
|
||||
regulators {
|
||||
usb_otg_vbus: vbus {
|
||||
enable-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&boost_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
regulator-max-microamp = <960000>;
|
||||
regulator-max-microvolt = <5088000>;
|
||||
regulator-min-microamp = <512000>;
|
||||
regulator-min-microvolt = <4992000>;
|
||||
regulator-name = "usb_otg_vbus";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
|
|
@ -853,6 +929,12 @@ usbc0_int: usbc0-int {
|
|||
rockchip,pins =
|
||||
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
usbc_sbu_dc: usbc-sbu-dc {
|
||||
rockchip,pins =
|
||||
<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3-lcd {
|
||||
|
|
@ -1286,6 +1368,46 @@ bluetooth {
|
|||
};
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
usb-role-switch;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
dwc3_0_role_switch: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usbc0_role_sw>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
mode-switch;
|
||||
orientation-switch;
|
||||
pinctrl-0 = <&usbc_sbu_dc>;
|
||||
pinctrl-names = "default";
|
||||
sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
rockchip,dp-lane-mux = <2 3>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usbdp_phy0_orientation_switch: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&usbc0_orien_sw>;
|
||||
};
|
||||
|
||||
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&dp_altmode_mux>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user