mirror of
https://github.com/torvalds/linux.git
synced 2026-06-01 19:13:47 +02:00
net: dsa: lantiq: allow arbitrary MII registers
The Lantiq GSWIP and MaxLinear GSW1xx drivers are currently relying on a hard-coded mapping of MII ports to their respective MII_CFG and MII_PCDU registers and only allow applying an offset to the port index. While this is sufficient for the currently supported hardware, the very similar Intel GSW150 (aka. Lantiq PEB7084) cannot be described using this arrangement. Introduce two arrays to specify the MII_CFG and MII_PCDU registers for each port, replacing the current bitmap used to safeguard MII ports as well as the port index offset. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/63fc01195196384f5e244a0ce9ec2ae3a6c08fe3.1769099517.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit is contained in:
Daniel Golle
Paolo Abeni
parent
e7e354aa49
commit
3383751185
|
|
@ -463,10 +463,22 @@ static void gswip_shutdown(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
static const struct gswip_hw_info gswip_xrx200 = {
|
||||
.max_ports = 7,
|
||||
.max_ports = GSWIP_MAX_PORTS,
|
||||
.allowed_cpu_ports = BIT(6),
|
||||
.mii_ports = BIT(0) | BIT(1) | BIT(5),
|
||||
.mii_port_reg_offset = 0,
|
||||
.mii_cfg = {
|
||||
[0] = GSWIP_MII_CFGp(0),
|
||||
[1] = GSWIP_MII_CFGp(1),
|
||||
[2 ... 4] = -1,
|
||||
[5] = GSWIP_MII_CFGp(5),
|
||||
[6] = -1,
|
||||
},
|
||||
.mii_pcdu = {
|
||||
[0] = GSWIP_MII_PCDU0,
|
||||
[1] = GSWIP_MII_PCDU1,
|
||||
[2 ... 4] = -1,
|
||||
[5] = GSWIP_MII_PCDU5,
|
||||
[6] = -1,
|
||||
},
|
||||
.phylink_get_caps = gswip_xrx200_phylink_get_caps,
|
||||
.pce_microcode = &gswip_pce_microcode,
|
||||
.pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode),
|
||||
|
|
@ -474,10 +486,20 @@ static const struct gswip_hw_info gswip_xrx200 = {
|
|||
};
|
||||
|
||||
static const struct gswip_hw_info gswip_xrx300 = {
|
||||
.max_ports = 7,
|
||||
.max_ports = GSWIP_MAX_PORTS,
|
||||
.allowed_cpu_ports = BIT(6),
|
||||
.mii_ports = BIT(0) | BIT(5),
|
||||
.mii_port_reg_offset = 0,
|
||||
.mii_cfg = {
|
||||
[0] = GSWIP_MII_CFGp(0),
|
||||
[1 ... 4] = -1,
|
||||
[5] = GSWIP_MII_CFGp(5),
|
||||
[6] = -1,
|
||||
},
|
||||
.mii_pcdu = {
|
||||
[0] = GSWIP_MII_PCDU0,
|
||||
[1 ... 4] = -1,
|
||||
[5] = GSWIP_MII_PCDU5,
|
||||
[6] = -1,
|
||||
},
|
||||
.phylink_get_caps = gswip_xrx300_phylink_get_caps,
|
||||
.pce_microcode = &gswip_pce_microcode,
|
||||
.pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode),
|
||||
|
|
|
|||
|
|
@ -243,6 +243,8 @@
|
|||
|
||||
#define GSWIP_VLAN_UNAWARE_PVID 0
|
||||
|
||||
#define GSWIP_MAX_PORTS 7
|
||||
|
||||
struct gswip_pce_microcode {
|
||||
u16 val_3;
|
||||
u16 val_2;
|
||||
|
|
@ -253,8 +255,8 @@ struct gswip_pce_microcode {
|
|||
struct gswip_hw_info {
|
||||
int max_ports;
|
||||
unsigned int allowed_cpu_ports;
|
||||
unsigned int mii_ports;
|
||||
int mii_port_reg_offset;
|
||||
s16 mii_cfg[GSWIP_MAX_PORTS];
|
||||
s16 mii_pcdu[GSWIP_MAX_PORTS];
|
||||
bool supports_2500m;
|
||||
const struct gswip_pce_microcode (*pce_microcode)[];
|
||||
size_t pce_microcode_size;
|
||||
|
|
|
|||
|
|
@ -118,15 +118,11 @@ static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset,
|
|||
static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 mask, u32 set,
|
||||
int port)
|
||||
{
|
||||
int reg_port;
|
||||
|
||||
/* MII_CFG register only exists for MII ports */
|
||||
if (!(priv->hw_info->mii_ports & BIT(port)))
|
||||
if (priv->hw_info->mii_cfg[port] == -1)
|
||||
return;
|
||||
|
||||
reg_port = port + priv->hw_info->mii_port_reg_offset;
|
||||
|
||||
regmap_write_bits(priv->mii, GSWIP_MII_CFGp(reg_port), mask,
|
||||
regmap_write_bits(priv->mii, priv->hw_info->mii_cfg[port], mask,
|
||||
set);
|
||||
}
|
||||
|
||||
|
|
@ -610,28 +606,13 @@ static void gswip_mii_delay_setup(struct gswip_priv *priv, struct dsa_port *dp,
|
|||
u32 tx_delay = GSWIP_MII_PCDU_TXDLY_DEFAULT;
|
||||
u32 rx_delay = GSWIP_MII_PCDU_RXDLY_DEFAULT;
|
||||
struct device_node *port_dn = dp->dn;
|
||||
u16 mii_pcdu_reg;
|
||||
|
||||
/* As MII_PCDU registers only exist for MII ports, silently return
|
||||
* unless the port is an MII port
|
||||
*/
|
||||
if (!(priv->hw_info->mii_ports & BIT(dp->index)))
|
||||
if (priv->hw_info->mii_pcdu[dp->index] == -1)
|
||||
return;
|
||||
|
||||
switch (dp->index + priv->hw_info->mii_port_reg_offset) {
|
||||
case 0:
|
||||
mii_pcdu_reg = GSWIP_MII_PCDU0;
|
||||
break;
|
||||
case 1:
|
||||
mii_pcdu_reg = GSWIP_MII_PCDU1;
|
||||
break;
|
||||
case 5:
|
||||
mii_pcdu_reg = GSWIP_MII_PCDU5;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
/* legacy code to set default delays according to the interface mode */
|
||||
switch (interface) {
|
||||
case PHY_INTERFACE_MODE_RGMII_ID:
|
||||
|
|
@ -652,7 +633,7 @@ static void gswip_mii_delay_setup(struct gswip_priv *priv, struct dsa_port *dp,
|
|||
of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay);
|
||||
of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay);
|
||||
|
||||
regmap_write_bits(priv->mii, mii_pcdu_reg,
|
||||
regmap_write_bits(priv->mii, priv->hw_info->mii_pcdu[dp->index],
|
||||
GSWIP_MII_PCDU_TXDLY_MASK |
|
||||
GSWIP_MII_PCDU_RXDLY_MASK,
|
||||
GSWIP_MII_PCDU_TXDLY(tx_delay) |
|
||||
|
|
|
|||
|
|
@ -739,8 +739,16 @@ static void gsw1xx_shutdown(struct mdio_device *mdiodev)
|
|||
static const struct gswip_hw_info gsw12x_data = {
|
||||
.max_ports = GSW1XX_PORTS,
|
||||
.allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT),
|
||||
.mii_ports = BIT(GSW1XX_MII_PORT),
|
||||
.mii_port_reg_offset = -GSW1XX_MII_PORT,
|
||||
.mii_cfg = {
|
||||
[0 ... GSW1XX_MII_PORT - 1] = -1,
|
||||
[GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
|
||||
[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
|
||||
},
|
||||
.mii_pcdu = {
|
||||
[0 ... GSW1XX_MII_PORT - 1] = -1,
|
||||
[GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
|
||||
[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
|
||||
},
|
||||
.mac_select_pcs = gsw1xx_phylink_mac_select_pcs,
|
||||
.phylink_get_caps = &gsw1xx_phylink_get_caps,
|
||||
.supports_2500m = true,
|
||||
|
|
@ -753,8 +761,16 @@ static const struct gswip_hw_info gsw12x_data = {
|
|||
static const struct gswip_hw_info gsw140_data = {
|
||||
.max_ports = GSW1XX_PORTS,
|
||||
.allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT),
|
||||
.mii_ports = BIT(GSW1XX_MII_PORT),
|
||||
.mii_port_reg_offset = -GSW1XX_MII_PORT,
|
||||
.mii_cfg = {
|
||||
[0 ... GSW1XX_MII_PORT - 1] = -1,
|
||||
[GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
|
||||
[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
|
||||
},
|
||||
.mii_pcdu = {
|
||||
[0 ... GSW1XX_MII_PORT - 1] = -1,
|
||||
[GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
|
||||
[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
|
||||
},
|
||||
.mac_select_pcs = gsw1xx_phylink_mac_select_pcs,
|
||||
.phylink_get_caps = &gsw1xx_phylink_get_caps,
|
||||
.supports_2500m = true,
|
||||
|
|
@ -767,8 +783,16 @@ static const struct gswip_hw_info gsw140_data = {
|
|||
static const struct gswip_hw_info gsw141_data = {
|
||||
.max_ports = GSW1XX_PORTS,
|
||||
.allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT),
|
||||
.mii_ports = BIT(GSW1XX_MII_PORT),
|
||||
.mii_port_reg_offset = -GSW1XX_MII_PORT,
|
||||
.mii_cfg = {
|
||||
[0 ... GSW1XX_MII_PORT - 1] = -1,
|
||||
[GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
|
||||
[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
|
||||
},
|
||||
.mii_pcdu = {
|
||||
[0 ... GSW1XX_MII_PORT - 1] = -1,
|
||||
[GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
|
||||
[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
|
||||
},
|
||||
.mac_select_pcs = gsw1xx_phylink_mac_select_pcs,
|
||||
.phylink_get_caps = gsw1xx_phylink_get_caps,
|
||||
.port_setup = gsw1xx_port_setup,
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user