From 6f9674aa69ad0178ca8fc6995942ba9848c324f4 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 8 Sep 2025 13:34:24 +0200 Subject: [PATCH 1/2] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46 In all the MUX value for LED1 GPIO46 there is a Copy-Paste error where the MUX value is set to LED0_MODE_MASK instead of LED1_MODE_MASK. This wasn't notice as there were no board that made use of the secondary PHY LED but looking at the internal Documentation the actual value should be LED1_MODE_MASK similar to the other GPIO entry. Fix the wrong value to apply the correct MUX configuration. Cc: stable@vger.kernel.org Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC") Signed-off-by: Christian Marangi Acked-by: Lorenzo Bianconi Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-airoha.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-airoha.c b/drivers/pinctrl/mediatek/pinctrl-airoha.c index 1b2f132d76f0..ee5b9bab4552 100644 --- a/drivers/pinctrl/mediatek/pinctrl-airoha.c +++ b/drivers/pinctrl/mediatek/pinctrl-airoha.c @@ -1752,8 +1752,8 @@ static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = { .regmap[0] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, - GPIO_LAN3_LED0_MODE_MASK, - GPIO_LAN3_LED0_MODE_MASK + GPIO_LAN3_LED1_MODE_MASK, + GPIO_LAN3_LED1_MODE_MASK }, .regmap[1] = { AIROHA_FUNC_MUX, @@ -1816,8 +1816,8 @@ static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = { .regmap[0] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, - GPIO_LAN3_LED0_MODE_MASK, - GPIO_LAN3_LED0_MODE_MASK + GPIO_LAN3_LED1_MODE_MASK, + GPIO_LAN3_LED1_MODE_MASK }, .regmap[1] = { AIROHA_FUNC_MUX, @@ -1880,8 +1880,8 @@ static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = { .regmap[0] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, - GPIO_LAN3_LED0_MODE_MASK, - GPIO_LAN3_LED0_MODE_MASK + GPIO_LAN3_LED1_MODE_MASK, + GPIO_LAN3_LED1_MODE_MASK }, .regmap[1] = { AIROHA_FUNC_MUX, @@ -1944,8 +1944,8 @@ static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = { .regmap[0] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, - GPIO_LAN3_LED0_MODE_MASK, - GPIO_LAN3_LED0_MODE_MASK + GPIO_LAN3_LED1_MODE_MASK, + GPIO_LAN3_LED1_MODE_MASK }, .regmap[1] = { AIROHA_FUNC_MUX, From a061e739d36220c002da8b2429d5f16f637eb59a Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 8 Sep 2025 13:37:19 +0200 Subject: [PATCH 2/2] pinctrl: airoha: fix wrong MDIO function bitmaks With further testing with an attached Aeonsemi it was discovered that the pinctrl MDIO function applied the wrong bitmask. The error was probably caused by the confusing documentation related to these bits. Inspecting what the bootloader actually configure, the SGMII_MDIO_MODE is never actually set but instead it's set force enable to the 2 GPIO (gpio 1-2) for MDC and MDIO pin. The usage of GPIO might be confusing but this is just to instruct the SoC to not mess with those 2 PIN and as Benjamin reported it's also an Errata of 7581. The FORCE_GPIO_EN doesn't set them as GPIO function (that is configured by a different register) but it's really to actually ""enable"" those lines. Normally the SoC should autodetect this by HW but it seems AN7581 have problem with this and require this workaround to force enable the 2 pin. Applying this configuration permits correct functionality of any externally attached PHY. Cc: stable@vger.kernel.org Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC") Signed-off-by: Christian Marangi Acked-by: Benjamin Larsson Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-airoha.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-airoha.c b/drivers/pinctrl/mediatek/pinctrl-airoha.c index ee5b9bab4552..b405dfa20891 100644 --- a/drivers/pinctrl/mediatek/pinctrl-airoha.c +++ b/drivers/pinctrl/mediatek/pinctrl-airoha.c @@ -108,6 +108,9 @@ #define JTAG_UDI_EN_MASK BIT(4) #define JTAG_DFD_EN_MASK BIT(3) +#define REG_FORCE_GPIO_EN 0x0228 +#define FORCE_GPIO_EN(n) BIT(n) + /* LED MAP */ #define REG_LAN_LED0_MAPPING 0x027c #define REG_LAN_LED1_MAPPING 0x0280 @@ -718,17 +721,17 @@ static const struct airoha_pinctrl_func_group mdio_func_group[] = { { .name = "mdio", .regmap[0] = { - AIROHA_FUNC_MUX, - REG_GPIO_PON_MODE, - GPIO_SGMII_MDIO_MODE_MASK, - GPIO_SGMII_MDIO_MODE_MASK - }, - .regmap[1] = { AIROHA_FUNC_MUX, REG_GPIO_2ND_I2C_MODE, GPIO_MDC_IO_MASTER_MODE_MODE, GPIO_MDC_IO_MASTER_MODE_MODE }, + .regmap[1] = { + AIROHA_FUNC_MUX, + REG_FORCE_GPIO_EN, + FORCE_GPIO_EN(1) | FORCE_GPIO_EN(2), + FORCE_GPIO_EN(1) | FORCE_GPIO_EN(2) + }, .regmap_size = 2, }, };